With the new support for EventNotifiers in the AIO event loop, we
can hook a completion port to every opened file and use asynchronous
I/O on them.
Wine's support is extremely inefficient, also because it really does
the I/O synchronously on regular files. (!) But it works, and it is
good to keep the Win32 and POSIX ports as similar as possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Making the qemu_paiocb specific to raw devices will let us access members
of the BDRVRawState arbitrarily.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Win32 implementation will only accept EventNotifiers, thus a few
drivers are disabled under Windows. EventNotifiers are a good match
for the GSource implementation, too, because the Win32 port of glib
allows to place their HANDLEs in a GPollFD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Error management is important for mirroring; otherwise, an error on the
target (even something as "innocent" as ENOSPC) requires to start again
with a full copy. Similar to on_read_error/on_write_error, two separate
knobs are provided for on_source_error (reads) and on_target_error (writes).
The default is 'report' for both.
The 'ignore' policy will leave the sector dirty, so that it will be
retried later. Thus, it will not cause corruption.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Switching to the target of the migration is done mostly asynchronously,
and reported to management via the BLOCK_JOB_COMPLETED event; the only
synchronous phase is opening the backing files. bdrv_open_backing_file
can always be done, even for migration of the full image (aka sync:
'full'). In this case, qmp_drive_mirror will create the target disk
with no backing file at all, and bdrv_open_backing_file will be a no-op.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background. This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program. It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.
The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.
The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.
In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source. (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).
It is not yet possible to complete the job and switch over to the target
disk. The next patches will fix this and add many refinements to the
basic idea introduced here. These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Avoid strncpy+manual-NUL-terminate. Use pstrcpy instead.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* parse_vdiname: Use pstrcpy, not strncpy, when the destination
buffer must be NUL-terminated.
* sd_open: Likewise, avoid buffer overrun.
* do_sd_create: Likewise. Leave the preceding memset, since
pstrcpy does not NUL-fill, and filename needs that.
* sd_snapshot_create: Add a comment/question.
* find_vdi_name: Remove a useless memset.
* sd_snapshot_goto: Remove a useless memset.
Use pstrcpy to NUL-terminate, because find_vdi_name requires
that its vdi arg (filename parameter) be NUL-terminated.
It seems ok not to NUL-fill the buffer.
Do the same for snapid: remove useless memset-0 (instead,
zero tag[0]). Use pstrcpy, not strncpy.
* sd_snapshot_list: Use pstrcpy, not strncpy to write
into the ->name member. Each must be NUL-terminated.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first. If you have
[set-state]
event = "..."
state = "1"
new_state = "2"
[set-state]
event = "..."
state = "2"
new_state = "1"
for example the state will remain locked at 1. This can be fixed
by first processing all rules, and then setting the state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for error management to streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the live commit coroutine. This iteration focuses on the
commit only below the active layer, and not the active layer itself.
The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base. At the end, intermediate images are deleted, and the
chain stitched together. Images are restored to their original open
flags upon completion.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds gluster as the new block backend in QEMU. This gives
QEMU the ability to boot VM images from gluster volumes. Its already
possible to boot from VM images on gluster volumes using FUSE mount, but
this patchset provides the ability to boot VM images from gluster volumes
by by-passing the FUSE layer in gluster. This is made possible by
using libgfapi routines to perform IO on gluster volumes directly.
VM Image on gluster volume is specified like this:
file=gluster[+transport]://[server[:port]]/volname/image[?socket=...]
'gluster' is the protocol.
'transport' specifies the transport type used to connect to gluster
management daemon (glusterd). Valid transport types are
tcp, unix and rdma. If a transport type isn't specified, then tcp
type is assumed.
'server' specifies the server where the volume file specification for
the given volume resides. This can be either hostname, ipv4 address
or ipv6 address. ipv6 address needs to be within square brackets [ ].
If transport type is 'unix', then 'server' field should not be specifed.
The 'socket' field needs to be populated with the path to unix domain
socket.
'port' is the port number on which glusterd is listening. This is optional
and if not specified, QEMU will send 0 which will make gluster to use the
default port. If the transport type is unix, then 'port' should not be
specified.
'volname' is the name of the gluster volume which contains the VM image.
'image' is the path to the actual VM image that resides on gluster volume.
Examples:
file=gluster://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
file=gluster+rdma://1.2.3.4:24007/testvol/a.img
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
block: remove keep_read_only flag from BlockDriverState struct
block: convert bdrv_commit() to use bdrv_reopen()
block: vpc image file reopen
block: vdi image file reopen
block: vmdk image file reopen
block: qcow image file reopen
block: qcow2 image file reopen
block: qed image file reopen
block: raw image file reopen
block: raw-posix image file reopen
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: do not parse BDRV_O_CACHE_WB in block drivers
block: move open flag parsing in raw block drivers to helper functions
block: move aio initialization into a helper function
block: Framework for reopening files safely
block: make bdrv_set_enable_write_cache() modify open_flags
block: correctly set the keep_read_only flag
blockdev: preserve readonly and snapshot states across media changes
There is currently nothing that needs to be done for VPC image
file reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is currently nothing that needs to be done for VDI reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch supports reopen for VMDK image files. VMDK extents are added
to the existing reopen queue, so that the transactional model of reopen
is maintained with multiple image files.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qcow format.
There is currently nothing that needs to be done by the qcow driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qcow2 format.
There is currently nothing that needs to be done by the qcow2 driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the qed format.
There is currently nothing that needs to be done by the qed driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are the stubs for the file reopen drivers for the raw format.
There is currently nothing that needs to be done by the raw driver
in reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is derived from the Supriya Kannery's reopen patches.
This contains the raw-posix driver changes for the bdrv_reopen_*
functions. All changes are staged into a temporary scratch buffer
during the prepare() stage, and copied over to the live structure
during commit(). Upon abort(), all changes are abandoned, and the
live structures are unmodified.
The _prepare() will create an extra fd - either by means of a dup,
if possible, or opening a new fd if not (for instance, access
control changes). Upon _commit(), the original fd is closed and
the new fd is used. Upon _abort(), the duplicate/new fd is closed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aligned_buf pointer and aligned_buf size are no longer used in
raw_posix.c, so remove all references to them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than check for a non-NULL aligned_buf to determine if
raw_aio_submit needs to check for alignment, check for the presence
of BDRV_O_NOCACHE in the bs->open_flags.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags,
and in the bs->open_flags.
This patch removes the code, leaving the behaviour behind as if
BDRV_O_CACHE_WB was set.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Code motion, to move parsing of open flags into a helper function.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move AIO initialization for raw-posix block driver into a helper function.
In addition to just code motion, the aio_ctx pointer is checked for NULL,
prior to calling laio_init(), to make sure laio_init() is only run once.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We no longer need to explicitely call qemu_notify_event() any more
since this is now done automatically any time the filehandles we listen
to change.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to support SG_IO from the synchronous iscsi_ioctl() since
scsi-block uses this to do an INQ to the device to discover its properties
This patch makes scsi-block work with iscsi.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ccc-analyzer reports these warnings:
block/vdi.c:704:13: warning: Dereference of null pointer
bmap[i] = VDI_UNALLOCATED;
^
block/vdi.c:702:13: warning: Dereference of null pointer
bmap[i] = i;
^
Moving some code into the if block fixes this.
It also avoids calling function write with 0 bytes of data.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Report from smatch:
block/curl.c:546 curl_close(21) info: redundant null check on s->url calling free()
The check was redundant, and free was also wrong because the memory
was allocated using g_strdup.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch sets data to be sent to Sheepdog correctly and fixes savevm
and loadvm operations on a Sheepdog image.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
qemu-iotests: add backing file smaller than image test case
stream: complete early if end of backing file is reached
qed: refuse unaligned zero writes with a backing file
It is possible to create an image that is larger than its backing file.
Reading beyond the end of the backing file produces zeroes if no writes
have been made to those sectors in the image file.
This patch finishes streaming early when the end of the backing file is
reached. Without this patch the block job hangs and continually tries
to stream the first sectors beyond the end of the backing file.
To reproduce the hung block job bug:
$ qemu-img create -f qcow2 backing.qcow2 128M
$ qemu-img create -f qcow2 -o backing_file=backing.qcow2 image.qcow2 6G
$ qemu -drive if=virtio,cache=none,file=image.qcow2
(qemu) block_stream virtio0
(qemu) info block-jobs
The qemu-iotests 030 streaming test still passes.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero writes have cluster granularity in QED. Therefore they can only be
used to zero entire clusters.
If the zero write request leaves sectors untouched, zeroing the entire
cluster would obscure the backing file. Instead return -ENOTSUP, which
is handled by block.c:bdrv_co_do_write_zeroes() and falls back to a
regular write.
The qemu-iotests 034 test cases covers this scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The number of blocks of the device is used to compute the device size
in bdrv_getlength()/iscsi_getlength().
For MMC devices, the ReturnedLogicalBlockAddress in the READCAPACITY10
has a special meaning when it is 0.
In this case it does not mean that LBA 0 is the last accessible LBA,
and thus the device has 1 readable block, but instead it means that the
disc is blank and there are no readable blocks.
This change ensures that when the iSCSI LUN is loaded with a blank
DVD-R disk or similar that bdrv_getlength() will return the correct
size of the device as 0 bytes.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
* kwolf/for-anthony:
virtio-blk: hide VIRTIO_BLK_F_CONFIG_WCE from old machine types
Documentation: Warn against qemu-img on active image
vmdk: Read footer for streamOptimized images
vmdk: Fix header structure
Conflicts:
hw/virtio-blk.c
This patch fixes two main issues with block/iscsi.c:
1) iscsi_task_mgmt_abort_task_async calls iscsi_scsi_task_cancel which
was also directly called in iscsi_aio_cancel
2) a race between task completion and task abortion could happen cause
the scsi_free_scsi_task were done before iscsi_schedule_bh has finished.
To fix this, all the freeing of IscsiTasks and releasing of the AIOCBs
is centralized in iscsi_bh_cb, independent of whether the SCSI command
has completed or was cancelled.
3) iscsi_aio_cancel was not synchronously waiting for the end of the
command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is always used with the same callback, remove the argument. And
its return value is never used, assume allocation succeeds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 64e69e8092. The commit
returned immediately from iscsi_aio_cancel, risking corruption in case the
following happens:
guest qemu target
=========================================================================
send write 1 -------->
send write 1 -------->
cancel write 1 ------>
cancel write 1 ------>
<------------------ cancellation processed
send write 2 -------->
send write 2 -------->
<---------------- completed write 2
<------------------ completed write 2
<---------------- completed write 1
<---------------- cancellation not done
Here, the guest would see write 2 superseding write 1, when in fact the
outcome could have been the opposite. The right behavior is to return
only after the target says whether the cancellation was done or not, and
it will be implemented by the next three patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The footer takes precedence over the header when it exists. It contains
the real grain directory offset that is missing in the header. Without
this patch, streamOptimized images with a footer cannot be read.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This patch converts all block layer close calls, that correspond
to qemu_open calls, to qemu_close.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch converts all block layer open calls to qemu_open.
Note that this adds the O_CLOEXEC flag to the changed open paths
when the O_CLOEXEC macro is defined.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
qemu-iotests: skip 039 with ./check -nocache
block: add BLOCK_O_CHECK for qemu-img check
qcow2: mark image clean after repair succeeds
qed: mark image clean after repair succeeds
blockdev: flip default cache mode from writethrough to writeback
virtio-blk: disable write cache if not negotiated
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
qemu-iotests: Save some sed processes
ahci: Fix sglist memleak in ahci_dma_rw_buf()
ahci: Fix ahci cdrom read corruptions for reads > 128k
virtio-blk: fix use-after-free while handling scsi commands
* bonzini/scsi-next:
scsi-disk: add support for the UNMAP command
scsi-disk: improve out-of-range LBA detection for WRITE SAME
scsi-disk: more assertions and resets for aiocb
virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags
iscsi: Pick default initiator-name based on the name of the VM
iscsi: reorganize code for parse_initiator_name
iscsi: do not leak initiator_name
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dirty bit is cleared after image repair succeeds in qcow2_open().
Move this into qcow2_check() so that all callers benefit from this
behavior when fix mode is enabled.
This is necessary so qemu-img check can call .bdrv_check() and mark the
image clean.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dirty bit is cleared after image repair succeeds in qed_open().
Move this into qed_check() so that all callers benefit from this
behavior when fix=true.
This is necessary so qemu-img check can call .bdrv_check() and mark the
image clean.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The argument of iscsi_create_context is never freed by libiscsi,
which in fact calls strdup on it. Avoid a leak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vvfat creates a virtual VFAT filesystem with a certain logical
geometry that depends on its options. It sets the "geometry hint" to
this geometry. It is the only block driver to do this.
The geometry hint is about about *physical* geometry, and used only by
certain hard disk device models.
vvfat's hint is normally invisible for device models, because
bdrv_open() puts a raw format on top of vvfat's fat protocol. That
raw format is where drive_init() puts the user's geometry (if any),
and where the device model gets it from.
Nobody complained, because the default physical geometry is the same
as vvfat's logical geometry:
opts LCHS def. PCHS
1024,16,63 same
:32: 1024,16,63 same
:16: 1024,16,63 same
:12: 64,16,63 same
Except when you specify :floppy:
opts LCHS def. PCHS
:floppy: 80, 2,36 5,16,63
:32:floppy: 80, 2,36 5,16,63
:16:floppy: 80, 2,36 5,16,63
:12:floppy: 80, 2,18 2,16,63
Silly thing to do for use with a hard disk.
However, the "raw" format can be suppressed by adding an
redundant-looking "format=vvfat" to "file=fat:FOO". Then, vvfat's
hint clobbers the user's geometry, i.e. -drive options cyls, heads,
secs get silently ignored. Don't do that.
No change without format=vvfat. With it, the user's hard disk
geometry (-drive options cyls, heads, secs) is now obeyed, and the
default hard disk geometry with :floppy: now matches the one without
format=vvfat.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unless parameter ":floppy:" is given, vvfat creates a virtual image
with DOS MBR defining a single partition which holds the FAT file
system. The size of the virtual image depends on the width of the
FAT: 32 MiB (CHS 64, 16, 63) for 12 bit FAT, 504 MiB (CHS 1024, 16,
63) for 16 and 32 bit FAT, leaving (64*16-1)*63 = 64449 and
(1024*16-1)*64 = 1032129 sectors for the partition.
However, it screws up the end of the partition in the MBR:
FAT width param. start CHS end CHS start LBA size
:32: 0,1,1 1023,14,63 63 1032065
:16: 0,1,1 1023,14,55 63 1032057
:12: 0,1,1 63,14,55 63 64377
The actual FAT file system nevertheless assumes the partition has
1032129 or 64449 sectors. Oops.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only buffers that map to unallocated blocks need to be zeroed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony: (24 commits)
block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
qtest: Tidy up temporary files properly
fdc: Drop broken code for user-defined floppy geometry
fdc_test: introduce test_sense_interrupt
fdc_test: update media_change test
fdc: fix interrupt handling
fdc: rewrite seek and DSKCHG bit handling
block: introduce bdrv_swap, implement bdrv_append on top of it
block: copy over job and dirty bitmap fields in bdrv_append
raw: hook into blkdebug
blkdebug: optionally tie errors to a specific sector
blkdebug: store list of active rules
blkdebug: pass getlength to underlying file
blkdebug: tiny cleanup
blkdebug: remove sync i/o events
sheepdog: traverse pending_list from the first for each time
sheepdog: split outstanding list into inflight and pending
sheepdog: make sure we don't free aiocb before sending all requests
sheepdog: use coroutine based socket functions in coroutine context
sheepdog: restart I/O when socket becomes ready in do_co_req()
...
This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev. Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is required when using blkdebug with raw format. Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are unused, except (by mistake more or less) in QED.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pending list can be modified in other coroutine context
sd_co_rw_vector, so we need to traverse the list from the first again
after we send the pending request.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
outstanding_list_head is used for both pending and inflight requests.
This patch splits it and improves readability.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch increments the pending counter before sending requests, and
make sures that aiocb is not freed while sending them.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This removes blocking network I/Os in coroutine context.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, no one reenters the yielded coroutine. This fixes it.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes warnings about dprintf format in debug mode.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qcow2_alloc_clusters() error handling code was introduced in commit
5d757b563d, the value of free_byte_offset
was clobbered in the error case. This patch keeps free_byte_offset at 0
so we will try to allocate clusters again next time this function is
called.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The DEBUG_ALLOC qcow2.h macro enables additional consistency checks
throughout the code. This makes it easier to spot corruptions that are
introduced during development. Since consistency check is an expensive
operation the DEBUG_ALLOC macro is used to compile checks out in normal
builds and qcow2_check_refcounts() calls missed the addition of a new
function argument.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the device we open is a SMC or SSC device, then force the use of sg. We
dont have any medium changer or tape emulation so only passthrough via
real sg or scsi-generic via iscsi would work anyway.
Forcing sg also makes qemu skip trying to read from the device to guess
the image format by reading from the device (find_image_format()).
SMC devices do not implement READ6/10/12/16 so it is not possible to
read from them (SSC have different CDBs).
With this patch I can successfully manage a SMC device wiht iscsi in
passthrough mode.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[Added TYPE_TAPE handling - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update iscsi to allow passthrough of SG_IO scsi commands when the iscsi
device is forced to be scsi-generic.
Implement both bdrv_ioctl() and bdrv_aio_ioctl() in the iscsi backend,
emulate the SG_IO ioctl and pass the SCSI commands across to the
iscsi target.
This allows end-to-end passthrough of SCSI all the way from the guest,
to qemu, via scsi-generic, then libiscsi all the way to the iscsi target.
To activate this you need to specify that the iscsi lun should be treated
as a scsi-generic device.
Example:
-device lsi -device scsi-generic,drive=MyISCSI \
-drive file=iscsi://10.1.1.125/iqn.ronnie.test/1,if=none,id=MyISCSI
Note, you can currently not boot a qemu guest from a scsi device.
Note,
This only works when the host is linux, since the emulation relies on
definitions of SG_IO from the scsi-generic implementation in the
linux kernel.
It should be fairly easy to re-implement some structures similar enough
for non-linux hosts to do the same style of passthrough via a fake
scsi generic layer and libiscsi if need be.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of s into the #ifdef sections that actually make
use of it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The autoclear feature bits can be used for qcow2 file format features
that are safe to "drop" by old programs that do not understand the
feature. Upon opening the image file unknown autoclear feature bits are
cleared and the image file header is rewritten, but this was happening
too early in the code when critical header fields were not yet loaded.
Process autoclear feature bits after all necessary header information
has been loaded.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
avail_sectors should really be the number of sectors from the start of
the allocation, not from the start of the write request.
We're lucky enough that this mistake didn't cause any real bug.
avail_sectors is only used in the intialiser of QCowL2Meta:
.nb_available = MIN(requested_sectors, avail_sectors),
m->nb_available in turn is only used for COW at the end of the
allocation. A COW occurs only if the request wasn't cluster aligned,
which in turn would imply that requested_sectors was less than
avail_sectors (both in the original and in the fixed version). In this
case avail_sectors is ignored and therefore the mistake doesn't cause
any misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
copy_sectors() always uses the sum (cluster_offset + n_start) or
(start_sect + n_start), so if some value is added to both cluster_offset
and start_sect, and subtracted from n_start, it's cancelled out anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writethrough does not need special-casing anymore in the qcow2 caches.
The block layer adds flushes after every guest-initiated data write,
and these will also flush the qcow2 caches to the OS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writeback caching was added in Ceph 0.46, and writethrough will be in
0.47. These are controlled by general config options, so there's no
need to check for librbd version.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
