Remove an out of date FIXME regarding the saturating arithmetic helpers:
we now do pass a pointer to CPUARMState to these helpers, and since
the AREG0 changes went in there is no difference between helper.c
and op_helper.c and therefore no point in moving the functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement abs_i32 inline (with movcond) rather than using a helper
function.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the TCG operation to do Neon 64 bit negations rather than calling
a helper routine for it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rework the handling of arguments to ARM semihosting calls so that we
handle a possible failure return from get_user_ual() or put_user_ual().
(This incidentally silences a lot of warnings from clang about
"expression result unused").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/memory/urgent:
memory: abort if a memory region is destroyed during a transaction
i440fx: avoid destroying memory regions within a transaction
memory: Make eventfd adhere to device endianness
Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* quintela/migration-next-20121017: (41 commits)
cpus: create qemu_in_vcpu_thread()
savevm: make qemu_file_put_notify() return errors
savevm: un-export qemu_file_set_error()
block-migration: handle errors with the return codes correctly
block-migration: Switch meaning of return value
block-migration: make flush_blks() return errors
buffered_file: buffered_put_buffer() don't need to set last_error
savevm: Only qemu_fflush() can generate errors
savevm: make qemu_fill_buffer() be consistent
savevm: unexport qemu_ftell()
savevm: unfold qemu_fclose_internal()
savevm: make qemu_fflush() return an error code
savevm: Remove qemu_fseek()
virtio-net: use qemu_get_buffer() in a temp buffer
savevm: unexport qemu_fflush
migration: make migrate_fd_wait_for_unfreeze() return errors
buffered_file: make buffered_flush return the error code
buffered_file: callers of buffered_flush() already check for errors
buffered_file: We can access directly to bandwidth_limit
buffered_file: unfold migrate_fd_close
...
* qemu-kvm/memory/dma: (23 commits)
pci: honor PCI_COMMAND_MASTER
pci: give each device its own address space
memory: add address_space_destroy()
dma: make dma access its own address space
memory: per-AddressSpace dispatch
s390: avoid reaching into memory core internals
memory: use AddressSpace for MemoryListener filtering
memory: move tcg flush into a tcg memory listener
memory: move address_space_memory and address_space_io out of memory core
memory: manage coalesced mmio via a MemoryListener
xen: drop no-op MemoryListener callbacks
kvm: drop no-op MemoryListener callbacks
xen_pt: drop no-op MemoryListener callbacks
vfio: drop no-op MemoryListener callbacks
memory: drop no-op MemoryListener callbacks
memory: provide defaults for MemoryListener operations
memory: maintain a list of address spaces
memory: export AddressSpace
memory: prepare AddressSpace for exporting
xen_pt: use separate MemoryListeners for memory and I/O
...
Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.
Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.
Tested using
setpci -s 03 COMMAND=3
while a ping was running on a NIC in slot 3. The kernel (Linux) detected
the stall and recovered after the command
setpci -s 03 COMMAND=7
was issued.
Signed-off-by: Avi Kivity <avi@redhat.com>
Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.
Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of accessing the cpu address space, use an address space
configured by the caller.
Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently we use a global radix tree to dispatch memory access. This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).
A side effect is that address_space_io also gains a dispatch table. When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary. Prepare for that by
moving the flush into a tcg-specific listener.
Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: Avi Kivity <avi@redhat.com>
With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.
The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: Avi Kivity <avi@redhat.com>
commit 38f419f352 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa18. But while techinically
that fix has been correct, all other similar variables are handled
differently. Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather
than hw_error().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the guest attempts an offset to a nonexistent register, just
log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new LOG_UNIMP tracing to report unimplemented
features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rather than a mix of direct printing to stderr and aborting
via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an include of qemu-log.h to hw.h, so that device model
code has access to these logging functions without the need
to directly include qemu-log.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a new category for device models to log guest behaviour
which is likely to be a guest bug of some kind (accessing
nonexistent registers, reading 32 bit wide registers with
a byte access, etc). Making this its own log category allows
those who care (mostly guest OS authors) to see the complaints
without bothering most users.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Subroutines do their own local temporary management.
Within disas_sparc_insn we limit the existance of the variable
to OP=2 insns, and delay initialization as late as is reasonable
for the specific XOP.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
And initialize it such that it (may) write directly to rd.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use cpu_tmp0 for other stuff, like Write Priv Register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The use of "tl" functions and a tmp64 is logically incompatible.
Use cpu_tmp0 instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In all cases we don't have write-before-read problems.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the last uses of cpu_tmp32. Unify the code between sparc64
and sparc32 by using the proper "tl" functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We don't need another temporary here. Load directly into the
register we want to set.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
