We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GDB's remote serial protocol allows stop-reply messages to be sent by
the stub either as a notification packet or as a reply to a GDB command
(provided that the cmd accepts such a response). QEMU currently does not
implement notification packets, so it should only send stop-replies
synchronously and when requested. Nevertheless, it still issues
unsolicited stop messages through gdb_vm_state_change().
Although this behavior doesn't seem to cause problems with GDB itself
(the messages are just ignored), it can impact other debuggers that
implement the GDB remote serial protocol, like hexagon-lldb. Let's
change the gdbstub to send stop messages only as a response to a
previous GDB command that accepts such a reply.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <a49c0897fc22a6a7827c8dfc32aef2e1d933ec6b.1683214375.git.quic_mathbern@quicinc.com>
The later handler if conditionally compiled only for Linux but we
forgot to ensure we don't advertise it lest we confuse our BSD
brethren.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 51c623b0de ("gdbstub: add support to Xfer:auxv:read: packet")
Reported-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Tested-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230403134920.2132362-4-alex.bennee@linaro.org>
It is pointless to build libgdb_user.fa in a system-only build
(or libgdb_softmmu.fa in a user-only build). Besides, in some
restricted build configurations, some APIs might be restricted /
not available. Example in a KVM-only builds where TCG is disabled:
$ ninja qemu-system-x86_64
[99/2187] Compiling C object gdbstub/libgdb_user.fa.p/user.c.o
FAILED: gdbstub/libgdb_user.fa.p/user.c.o
../../gdbstub/user.c: In function ‘gdb_breakpoint_insert’:
../../gdbstub/user.c:438:19: error: implicit declaration of function ‘cpu_breakpoint_insert’; did you mean ‘gdb_breakpoint_insert’? [-Werror=implicit-function-declaration]
438 | err = cpu_breakpoint_insert(cpu, addr, BP_GDB, NULL);
| ^~~~~~~~~~~~~~~~~~~~~
| gdb_breakpoint_insert
../../gdbstub/user.c:438:19: error: nested extern declaration of ‘cpu_breakpoint_insert’ [-Werror=nested-externs]
../../gdbstub/user.c: In function ‘gdb_breakpoint_remove’:
../../gdbstub/user.c:459:19: error: implicit declaration of function ‘cpu_breakpoint_remove’; did you mean ‘gdb_breakpoint_remove’? [-Werror=implicit-function-declaration]
459 | err = cpu_breakpoint_remove(cpu, addr, BP_GDB);
| ^~~~~~~~~~~~~~~~~~~~~
| gdb_breakpoint_remove
../../gdbstub/user.c:459:19: error: nested extern declaration of ‘cpu_breakpoint_remove’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
ninja: build stopped: subcommand failed.
Fixes: 61b2e136db ("gdbstub: only compile gdbstub twice for whole build")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230329161852.84992-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-3-alex.bennee@linaro.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
There is no longer anything target specific.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-29-richard.henderson@linaro.org>
Pass %x as uint32_t and %lx as uint64_t; pass the address
of %s as uint64_t and the length as uint32_t.
Add casts in semihosting/syscalls.c from target_ulong to
uint64_t; add casts from int to uint32_t for clarity.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-28-richard.henderson@linaro.org>
This function is unused, except to implement gdb_do_syscall.
Fold the implementations together.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-27-richard.henderson@linaro.org>
Most of the syscall code is config agnostic aside from the size of
target_ulong. In preparation for the next patch move the final bits
of specialisation into the appropriate user and softmmu helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-26-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-26-richard.henderson@linaro.org>
Now we have removed any target specific bits from the core gdbstub
code we only need to build it twice. We have to jump a few meson hoops
to manually define the CONFIG_USER_ONLY symbol but it seems to work.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-23-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-23-richard.henderson@linaro.org>
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
This is a hangover from the original code. addr is misleading as it is
only really a register id. While len will never exceed
MAX_PACKET_LENGTH I've used size_t as that is what strlen returns.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-20-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-20-richard.henderson@linaro.org>
The underlying call uses vaddr and the comms API uses unsigned long
long which will always fit. We don't need to deal in target_ulong
here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-19-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-19-richard.henderson@linaro.org>
Currently we only support replay for softmmu mode so it is a constant
false for user-mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-18-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-18-richard.henderson@linaro.org>
This is needed for handling vcont packets as the way of calculating
max cpus vhanges between user and softmmu mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-17-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-17-richard.henderson@linaro.org>
The two implementations are different enough to encourage having a
specialisation and we can move some of the softmmu only stuff out of
gdbstub.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-16-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-16-richard.henderson@linaro.org>
In both user and softmmu cases we are just replying with a constant.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-15-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-15-richard.henderson@linaro.org>
We unfortunately handle the checking of packet acknowledgement
differently for user and softmmu modes. Abstract the user mode stuff
behind gdb_got_immediate_ack with a stub for softmmu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-14-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-14-richard.henderson@linaro.org>
We don't really need a table for mapping two symbols.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-13-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-13-richard.henderson@linaro.org>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
This is mostly code motion but a number of things needed to be done
for this minimal patch set:
- move shared structures to internals.h
- splitting some functions into user and softmmu versions
- fixing a few casting issues to keep softmmu common
More CONFIG_USER_ONLY stuff will be handled in a following patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-11-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-11-richard.henderson@linaro.org>
We will be needing to use these helpers between the user and softmmu
files so declare them in the headers, add a system prefix and remove
static from the implementations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-10-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-10-richard.henderson@linaro.org>
These will be needed from multiple places in the code. They are
declared as inline so move to the header and fix up to modern coding
style.
The only other place that messes with hex stuff at the moment is the
URI handling in utils but that would be more code churn so leave for
now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-9-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-9-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
We are about to split softmmu and user mode helpers into different
files. To facilitate this we will need to share access to the GDBState
between those files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-7-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-7-richard.henderson@linaro.org>
In preparation for moving user/softmmu specific bits from the main
gdbstub file we need to separate the connection details into a
user/softmmu state. As these will eventually be defined in their own
files we move them out of the common GDBState structure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-6-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-6-richard.henderson@linaro.org>
Otherwise checkpatch will throw a hissy fit on the later patches that
split this function up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230302190846.2593720-5-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-5-richard.henderson@linaro.org>
When I started splitting gdbstub apart I was a little too boilerplate
with my file headers. Fix up to carry over Fabrice's copyright and the
LGPL license header.
Fixes: ae7467b1ac (gdbstub: move breakpoint logic to accel ops)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-3-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-3-richard.henderson@linaro.org>
Use something more specific to avoid name clashes.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-2-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-2-richard.henderson@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both insert/remove_breakpoint() handlers are used in system and
user emulation. We can not use the 'hwaddr' type on user emulation,
we have to use 'vaddr' which is defined as "wide enough to contain
any #target_ulong virtual address".
gdbstub.c doesn't require to include "exec/hwaddr.h" anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-4-philmd@linaro.org>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
This is in preparation of future refactoring as well as cleaning up
the source tree. Aside from the minor tweaks to meson and trace.h this
is pure code motion.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-43-alex.bennee@linaro.org>
