Commit Graph

2285 Commits

Author SHA1 Message Date
David Hildenbrand
8151942151 s390x/kvm: legacy_s390_alloc() only supports one allocation
We always allocate at a fixed address, a second allocation can therefore
of course never work. We would simply overwrite mappings.

This can e.g. happen in s390_memory_init(), if trying to allocate more
than > 8TB. Let's just bail out, as there is no need for supporting it
(legacy handling for z/VM).

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180628113817.30814-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
d66b43c896 s390x/tcg: fix CPU hotplug with single-threaded TCG
run_on_cpu() doesn't seem to work reliably until the CPU has been fully
created if the single-threaded TCG main loop is already running.

Therefore, hotplugging a CPU under single-threaded TCG does currently
not work. We should use the direct call instead of going via
run_on_cpu().

So let's use run_on_cpu() for KVM only - KVM requires it due to the initial
CPU reset ioctl. As a nice side effect, we get rid of the ifdef.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
7c12f710ba s390x/tcg: rearm the CKC timer during migration
If the CPU data is migrated after the TOD clock, the CKC timer of a CPU
is not rearmed. Let's rearm it when loading the CPU state.

Introduce tcg-stub.c just like kvm-stub.c for tcg specific stubs.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
9dc6753718 s390x/tcg: implement SET CLOCK
This allows a guest to change its TOD. We already take care of updating
all CKC timers from within S390TODClass.

Use MO_ALIGN to load the operand manually - this will properly trigger a
SPECIFICATION exception.

Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
345f1ab96e s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts
Let's stop the timer and delete any pending CKC IRQ before doing
anything else.

While at it, add a comment why the check for ckc == -1ULL is needed.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
7de3b1cdc6 s390x/tcg: properly implement the TOD
Right now, each CPU has its own TOD. Especially, the TOD will differ
based on creation time of a CPU - e.g. when hotplugging a CPU the times
will differ quite a lot, resulting in stall warnings in the guest.

Let's use a single TOD by implementing our new TOD device. Prepare it
for TOD-clock epoch extension.

Most importantly, whenever we set the TOD, we have to update the CKC
timer.

Introduce "tcg_s390x.h" just like "kvm_s390x.h" for tcg specific
function declarations that should not go into cpu.h.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
f777b20544 s390x/tcg: drop tod_basetime
Never set to anything but 0.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
8046f374a6 s390x/tod: factor out TOD into separate device
Let's treat this like a separate device. TCG will have to store the
actual state/time later on.

Include cpu-qom.h in kvm_s390x.h (due to S390CPU) to compile tod-kvm.c.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
4ab6a1feac s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*()
We are going to factor out the TOD into a separate device and use const
pointers for device class functions where possible. We are passing right
now ordinary pointers that should never be touched when setting the TOD.
Let's just pass the values directly.

Note that s390_set_clock() will be removed in a follow-on patch and
therefore its calling convention is not changed.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
David Hildenbrand
14055ce53c s390x/tcg: avoid overflows in time2tod/tod2time
Big values for the TOD/ns clock can result in some overflows that can be
avoided. Not all overflows can be handled however, as the conversion either
multiplies by 4.096 or divided by 4.096.

Apply the trick used in the Linux kernel in arch/s390/include/asm/timex.h
for tod_to_ns() and use the same trick also for the conversion in the
other direction.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
Christian Borntraeger
8727315111 s390x/cpumodel: default enable bpb and ppa15 for z196 and later
Most systems and host kernels provide the necessary building blocks for
bpb and ppa15. We can reverse the logic and default enable those
features, while still allowing to disable it via cpu model.

So let us add bpb and ppa15 to z196 and later default CPU model for the
qemu 3.0 machine. (like -cpu z13).  Older machine types (e.g.
s390-ccw-virtio-2.12) will retain the old value and not provide those
bits in the default model.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180626123830.18282-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
Thomas Huth
0f0f8b611e loader: Check access size when calling rom_ptr() to avoid crashes
The rom_ptr() function allows direct access to the ROM blobs that we
load during startup. However, there are currently no checks for the
size of the accesses, so it's currently possible to crash QEMU for
example with:

$ echo "Insane in the mainframe" > /tmp/test.txt
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -append xyz
Segmentation fault (core dumped)
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -initrd /tmp/test.txt
Segmentation fault (core dumped)
$ echo -n HdrS > /tmp/hdr.txt
$ sparc64-softmmu/qemu-system-sparc64 -kernel /tmp/hdr.txt -initrd /tmp/hdr.txt
Segmentation fault (core dumped)

We need a possibility to check the size of the ROM area that we want
to access, thus let's add a size parameter to the rom_ptr() function
to avoid these problems.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1530005740-25254-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02 10:37:38 +02:00
Peter Maydell
0f02251a30 xtensa: Avoid calling get_page_addr_code() from helper function
The xtensa frontend calls get_page_addr_code() from its
itlb_hit_test helper function. This function is really part
of the TCG core's internals, and calling it from a target
helper makes it awkward to make changes to that core code.
It also means that we don't pass the correct retaddr to
tlb_fill(), so we won't correctly handle the case where
an exception is generated.

The helper is used for the instructions IHI, IHU and IPFL.

Change it to call cpu_ldb_code_ra() instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-30 12:00:17 -07:00
Richard Henderson
9c509ff94e target/xtensa: Convert to TranslatorOps
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30 12:00:17 -07:00
Richard Henderson
1d38a7011f target/xtensa: Change gen_intermediate_code dc to pointer
This will reduce the size of the patch in the next patch,
where the context will have to be a pointer.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30 12:00:17 -07:00
Richard Henderson
3cc18eec0a target/xtensa: Convert to DisasContextBase
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30 12:00:14 -07:00
Richard Henderson
f3531da588 target/xtensa: Replace DISAS_UPDATE with DISAS_NORETURN
The usage of DISAS_UPDATE is after noreturn helpers.
It is thus indistinguishable from DISAS_NORETURN.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30 11:58:03 -07:00
Max Filippov
f40385c959 target/xtensa: check zero overhead loop alignment
ISA book documents that the first instruction of zero overhead loop
must fit completely into naturally aligned region of an instruction
fetch unit size. Check that condition and log a message if it's
violated.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-06-30 11:58:02 -07:00
Richard Henderson
802abf4024 target/arm: Add ID_ISAR6
This register was added to aa32 state by ARMv8.2.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:30:54 +01:00
Richard Henderson
0b33968e7f target/arm: Prune a15 features from max
There is no need to re-set these 3 features already
implied by the call to aarch64_a15_initfn.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:30:54 +01:00
Richard Henderson
156a706536 target/arm: Prune a57 features from max
There is no need to re-set these 9 features already
implied by the call to aarch64_a57_initfn.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:30:54 +01:00
Richard Henderson
11d7870b1b target/arm: Fix SVE system register access checks
Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check.  If
we also check ARM_CP_FPU the double fp_access_check asserts.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180629001538.11415-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:30:53 +01:00
Richard Henderson
7e8fafbfd0 target/arm: Fix SVE signed division vs x86 overflow exception
We already check for the same condition within the normal integer
sdiv and sdiv64 helpers.  Use a slightly different formation that
does not require deducing the expression type.

Fixes: f97cfd596e
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-2-richard.henderson@linaro.org
[PMM: reworded a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:28:24 +01:00
Aaron Lindsay
b7d793ad3d target/arm: Mark PMINTENSET accesses as possibly doing IO
This makes it match its AArch64 equivalent, PMINTENSET_EL1

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-13-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:18 +01:00
Aaron Lindsay
a6070648aa target/arm: Remove redundant DIV detection for KVM
KVM implies V7VE, which implies ARM_DIV and THUMB_DIV. The conditional
detection here is therefore unnecessary. Because V7VE is already
unconditionally specified for all KVM hosts, ARM_DIV and THUMB_DIV are
already indirectly specified and do not need to be included here at all.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-6-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:18 +01:00
Aaron Lindsay
5110e6836b target/arm: Add ARM_FEATURE_V7VE for v7 Virtualization Extensions
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-5-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:17 +01:00
Alex Bennée
26c4a83bd4 target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space
Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180625160009.17437-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:16 +01:00
Richard Henderson
26c470a7bb target/arm: Implement ARMv8.2-DotProd
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators.  Enable the feature
within -cpu max for CONFIG_USER_ONLY.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:15 +01:00
Richard Henderson
802ac0e1e9 target/arm: Enable SVE for aarch64-linux-user
Enable ARM_FEATURE_SVE for the generic "max" cpu.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:15 +01:00
Richard Henderson
16fcfdc732 target/arm: Implement SVE dot product (indexed)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:15 +01:00
Richard Henderson
d730ecaae7 target/arm: Implement SVE dot product (vectors)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-33-richard.henderson@linaro.org
[PMM: moved 'ra=%reg_movprfx' here from following patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:13 +01:00
Richard Henderson
18fc240578 target/arm: Implement SVE fp complex multiply add (indexed)
Enhance the existing helpers to support SVE, which takes the
index from each 128-bit segment.  The change has no effect
for AdvSIMD, since there is only one such segment.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:12 +01:00
Richard Henderson
2cc99919a8 target/arm: Pass index to AdvSIMD FCMLA (indexed)
For aa64 advsimd, we had been passing the pre-indexed vector.
However, sve applies the index to each 128-bit segment, so we
need to pass in the index separately.

For aa32 advsimd, the fp32 operation always has index 0, but
we failed to interpret the fp16 index correctly.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:12 +01:00
Richard Henderson
05f48bab30 target/arm: Implement SVE fp complex multiply add
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:12 +01:00
Richard Henderson
76a9d9cdc4 target/arm: Implement SVE floating-point complex add
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:11 +01:00
Richard Henderson
a21035822e target/arm: Implement SVE MOVPRFX
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:11 +01:00
Richard Henderson
ec5b375bb5 target/arm: Implement SVE floating-point unary operations
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:11 +01:00
Richard Henderson
cda3c75322 target/arm: Implement SVE floating-point round to integral value
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:10 +01:00
Richard Henderson
df4de1affc target/arm: Implement SVE floating-point convert to integer
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:10 +01:00
Richard Henderson
46d33d1e3c target/arm: Implement SVE floating-point convert precision
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:10 +01:00
Richard Henderson
67fcd9ad35 target/arm: Implement SVE floating-point trig multiply-add coefficient
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:09 +01:00
Richard Henderson
4d2e2a0338 target/arm: Implement SVE FP Compare with Zero Group
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:09 +01:00
Richard Henderson
3887c0388d target/arm: Implement SVE Floating Point Unary Operations - Unpredicated Group
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:09 +01:00
Richard Henderson
23fbe79faa target/arm: Implement SVE FP Fast Reduction Group
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:08 +01:00
Richard Henderson
ca40a6e6e3 target/arm: Implement SVE Floating Point Multiply Indexed Group
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:08 +01:00
Richard Henderson
cc48affe83 target/arm: Implement SVE floating-point arithmetic with immediate
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:08 +01:00
Richard Henderson
abfdefd5bd target/arm: Implement SVE floating-point compare vectors
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:07 +01:00
Richard Henderson
408ecde97b target/arm: Implement SVE scatter store vector immediate
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:07 +01:00
Richard Henderson
ed67eb7fa2 target/arm: Implement SVE first-fault gather loads
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:06 +01:00
Richard Henderson
673e9fa6c2 target/arm: Implement SVE gather loads
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:06 +01:00