Both structures are allocated once per mmu_idx.
There is no reason for them to be separate.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The AccelType type was converted to AccelClass QOM
object on b14a0b7469, and the original data type had
a field to store the option name which in turn was
used to search an accelerator. The lookup method
(accel_find) changed too, making the option field
unnecessary but it became AccelClass::opt_name despite
that. Therefore, and given that none accelerator
implementation sets AccelClass::opt_name, let's
remove this attribute.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190531165334.20403-2-wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On pseries, core-ids are strongly binded to a node-id by the command
line option. If an user tries to add a CPU to the wrong node, he has
an error but it is not really helpful:
qemu-system-ppc64 ... -smp 1,maxcpus=64,cores=1,threads=1,sockets=1 \
-numa node,nodeid=0 -numa node,nodeid=1 ...
(qemu) device_add power9_v2.0-spapr-cpu-core,core-id=30,node-id=1
Error: node-id=1 must match numa node specified with -numa option
This patch improves this error message by giving to the user the good
node-id to use with the core-id he's providing
Error: invalid node-id, must be 0
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190529160747.778-1-lvivier@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no functional change but the flow is (hopefully)
more consistent for both file and folder object types.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <20190401211712.19012-4-bsd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
to the QEMU CPU model, so it is enabled as default.
Also:
- One fix (and one workaround) for the STFLE instruction
- Fix the alignment of vector registers (and change the data type)
- Properly generate ELF_HWCAP for s390x for linux-user
- Use a gvec helper for VECTOR SELECT
-----BEGIN PGP SIGNATURE-----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=KdI+
-----END PGP SIGNATURE-----
Merge tag 's390x-tcg-2019-06-07' into s390-next-staging
Finalize implementation of the "Vector Facility" for s390x TCG. Add it
to the QEMU CPU model, so it is enabled as default.
Also:
- One fix (and one workaround) for the STFLE instruction
- Fix the alignment of vector registers (and change the data type)
- Properly generate ELF_HWCAP for s390x for linux-user
- Use a gvec helper for VECTOR SELECT
# gpg: Signature made Fri 07 Jun 2019 02:58:01 PM CEST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
* tag 's390x-tcg-2019-06-07': (33 commits)
linux-user: elf: ELF_HWCAP for s390x
s390x/tcg: Use tcg_gen_gvec_bitsel for VECTOR SELECT
s390x: Bump the "qemu" CPU model up to a stripped-down z13
s390x/tcg: We support the Vector Facility
s390x/tcg: Allow linux-user to use vector instructions
s390x/tcg: Implement VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement VECTOR FP SUBTRACT
s390x/tcg: Implement VECTOR FP SQUARE ROOT
s390x/tcg: Implement VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement VECTOR FP MULTIPLY
s390x/tcg: Implement VECTOR LOAD ROUNDED
s390x/tcg: Implement VECTOR LOAD LENGTHENED
s390x/tcg: Implement VECTOR LOAD FP INTEGER
s390x/tcg: Implement VECTOR FP DIVIDE
s390x/tcg: Implement VECTOR FP CONVERT TO LOGICAL 64-BIT
s390x/tcg: Implement VECTOR FP CONVERT TO FIXED 64-BIT
s390x/tcg: Implement VECTOR FP CONVERT FROM LOGICAL 64-BIT
s390x/tcg: Implement VECTOR FP CONVERT FROM FIXED 64-BIT
s390x/tcg: Implement VECTOR FP COMPARE (EQUAL|HIGH|HIGH OR EQUAL)
...
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add all HWCAPs that we can support under TCG right now, when the
respective CPU facilities are enabled.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This replaces the target-specific implementations for VSEL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We don't care about the other two missing base features:
- S390_FEAT_DFP_PACKED_CONVERSION
- S390_FEAT_GROUP_GEN13_PTFF
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add it to the max model, so we can enable it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Once we unlock S390_FEAT_VECTOR for TCG, we want linux-user to be
able to make use of it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Hildenbrand <david@redhat.com>
Simulate XxC=0 and ERM=0 (current mode), so we can use the existing
helper function.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The only FP instruction we can implement without an helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse some of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Take care of reading/indicating the 32-bit elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse most of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse most of the infrastructure added for VECTOR FP ADD.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
1. We'll reuse op_vcdg() for similar instructions later, prepare for
that.
2. We'll reuse vop64_2() later for other instructions.
We have to mangle the erm (effective rounding mode) and the m4 into
the simd_data(), and properly unmangle them again.
Make sure to restore the erm before triggering an exception.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Provide for all three instructions all four combinations of cc bit and
s bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As far as I can see, there is only a tiny difference.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
1. We'll reuse op_vfa() for similar instructions later, prepare for
that.
2. We'll reuse vop64_3() for other instructions later.
3. Take care of modifying the vector register only if no trap happened.
- on traps, flags are not updated and no elements are modified
- traps don't modify the fpc flags
- without traps, all exceptions of all elements are merged
4. We'll reuse check_ieee_exc() later when we need the XxC flag.
We have to check for exceptions after processing each element.
Provide separate handlers for single/all element processing. We'll do
the same for all applicable FP instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Vector floating-point instructions will require these functions, so
allow to use them from other files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Handling is similar to data exceptions, however we can always store the
VXC into the lowore and the FPC:
z14 PoP, 6-20, "Vector-Exception Code"
When a vector-processing exception causes a pro-
gram interruption, a vector-exception code (VXC) is
stored at location 147, and zeros are stored at loca-
tions 144-146. The VXC is also placed in the DXC
field of the floating-point-control (FPC) register if bit
45 of control register 0 is one. When bit 45 of control
register 0 is zero and bit 46 of control register 0 is
one, the DXC field of the FPC register and the con-
tents of storage at location 147 are unpredictable.
Signed-off-by: David Hildenbrand <david@redhat.com>
The PoP (z14, 7-382) says:
Doublewords to the right of the doubleword in which the
highest-numbered facility bit is assigned for a model
may or may not be stored.
However, stack protection in certain binaries can't deal with that.
"gzip" example code:
f1b4: a7 08 00 03 lhi %r0,3
f1b8: b2 b0 f0 a0 stfle 160(%r15)
f1bc: e3 20 f0 b2 00 90 llgc %r2,178(%r15)
f1c2: c0 2b 00 00 00 01 nilf %r2,1
f1c8: b2 4f 00 10 ear %r1,%a0
f1cc: b9 14 00 22 lgfr %r2,%r2
f1d0: eb 11 00 20 00 0d sllg %r1,%r1,32
f1d6: b2 4f 00 11 ear %r1,%a1
f1da: d5 07 f0 b8 10 28 clc 184(8,%r15),40(%r1)
f1e0: a7 74 00 06 jne f1ec <file_read@@Base+0x1bc>
f1e4: eb ef f1 30 00 04 lmg %r14,%r15,304(%r15)
f1ea: 07 fe br %r14
f1ec: c0 e5 ff ff 9d 6e brasl %r14,2cc8 <__stack_chk_fail@plt>
In QEMU, we currently have:
max_bytes = 24
the code asks for (3 + 1) doublewords == 32 bytes.
If we write 32 bytes instead of only 24, and return "2 + 1" doublewords
("one less than the number of doulewords needed to contain all of the
facility bits"), the example code detects a stack corruption.
In my opinion, the code is wrong. However, it seems to work fine on
real machines. So let's limit storing to the minimum of the requested
and the maximum doublewords.
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
used_stfl_bytes is 0, before initialized via prepare_stfl() on the
first invocation. We have to move the calculation of max_bytes after
prepare_stfl().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
11e2bfef79 ("tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store")
revealed that the vregs are not aligned to 16 bytes. Align them to
16 bytes, to avoid segfault'ing on x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Unfortunately, there is no easy way to avoid looping over all elements
in v2. Provide specialized variants for !cc,!rt/!cc,rt/cc,!rt/cc,rt and
all element types. Especially for different values of rt, the compiler
might be able to optimize the code a lot.
Add s390_vec_write_element().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR FIND ELEMENT EQUAL. Core logic courtesy of Richard H.
Add s390_vec_read_element() that can deal with element sizes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Complicated stuff. Provide two different helpers for CC an !CC handling.
We might want to add more helpers later.
zero_search() and match_index() are courtesy of Richard H.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The generic s390 section looks like the best resting place.
Message-Id: <20190529091243.25562-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc+jVzAAoJENSXKoln91plGK8H/0KFwVp0wDPGCYpl03slnLaw
sGlMWyfNt8ZOWrDkIIkT+WxJyidVOPkTK5n7cPIN+fT13i396Nq/1EQL/nVQEVXp
X/J+nfgkJoNcNlgUXtmDAYR3xMyjZohVYHVUwEo3KrsdVaQDXX0xOcNvNoJwppWf
/T/e/3QJebd+hoasLZvsD2RMxc7f1AS1ZLuXOGvKBJI38fP3b6IAOaP8CDBiYYwM
Ov1Mi66NnTrsMNH29skCvYDfGKtp2haBeTxmb8qENguv1DZVgmVoTKZN1pQ6J0Jx
7SNagHVCoKNw6MrOAH1vufYsiNEfofpr6BHxeBOa9z0VA3wLIFtVuhzY5FtfoEY=
=ZIqF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-7-2019' into staging
MIPS Queue for June 7th, 2019
# gpg: Signature made Fri 07 Jun 2019 10:59:15 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-7-2019:
tests/tcg: target/mips: Add README for MSA tests
tests/tcg: target/mips: Add tests for MSA FP max/min instructions
tests/tcg: target/mips: Add utility function reset_msa_registers()
tests/tcg: target/mips: Move four tests to a better location
tests/tcg: target/mips: Add tests for MSA shift instructions
tests/tcg: target/mips: Amend and rearrange MSA wrappers
target/mips: Unroll loops in helpers for MSA logic instructions
target/mips: Outline places for future MSA helpers
target/mips: Fix block-comment-related issues in msa_helper.c
target/mips: Fix space-related format issues in msa_helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add README for MSA tests. This is just to explain how to run tests even
without Makefile. Makefile will be provided later on.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-11-git-send-email-aleksandar.markovic@rt-rk.com>
Add function reset_msa_registers() and utilize it in each MSA test.
This is needed to ensure independency of test results on the state of
MSA registers before test execution. This also allows for correction
of tests for VSHF* instructions, that are now independent on the
previous state of MSA registers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-9-git-send-email-aleksandar.markovic@rt-rk.com>
Move tests for <MUL|MULR>_Q.<H|B> from "integer multiply" directory
to "fixed-point multiply" directory, since they do not operate on
integers, but on fixed point numbers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-8-git-send-email-aleksandar.markovic@rt-rk.com>
Amend and rearrange MSA wrappers to follow the same organization as
in MSA tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-6-git-send-email-aleksandar.markovic@rt-rk.com>
