In 06c4cc3660, we split the multiplication in two parts to avoid
a clang warning. But because double still rounds to 53 bits, this
does not provide additional precision beyond multiplication by
nextafter(0x1p64, 0), the largest representable value smaller
than 2**64.
However, since we have eliminated 1.0, mutiplying by 2**64 produces
a better distribution of input values to the output values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-3-richard.henderson@linaro.org>
Since the seed must be non-zero, subtracting 1 means puts the
rate in 0..UINT64_MAX-1, which allows the 0 and UINT64_MAX
thresholds to corrspond to 0% (never) and 100% (always).
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-2-richard.henderson@linaro.org>
s390x is our only big endian host in our CI, so building and testing QEMU
there is quite valuable. Thus let's also test the other targets with
additional jobs (also using different sets of pre-installed libraries to
get a better coverage of the things that we test).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200608114049.4693-1-thuth@redhat.com>
Now we have a source for registry images pull from there rather than
re-building every time on shippable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-41-alex.bennee@linaro.org>
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
Instead of building the docker files directly use the same docker.py
scripting as we do for building locally. This should help ensure we
use the exact same steps and allow us to cache properly when building
locally.
To get this working you have to have a fairly recent docker binary
otherwise you will see the error message:
=> ERROR importing cache manifest from registry.gitlab....
So far docker 19.03.12 works (from the docker apt repos) but 18.09.1,
build 4c52b90 which is packaged in Debian Buster fails.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-39-alex.bennee@linaro.org>
Most of the time we are just rebuilding the same things. We can skip
this although currently there is no mechanism for picking up new
distro releases.
Rather than try to be too fine grained allow any change to trigger all
the images being rebuilt.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-38-alex.bennee@linaro.org>
Total execution time with "-m slow" and x86_64 QEMU, drops from 3
minutes 15 seconds, down to 54 seconds.
Individual tests drop from 17-20 seconds, down to 3-4 seconds.
The cost of this change is that any QOM bugs resulting in the test
failure will not be directly associated with the device that caused
the failure. The test case is not frequently identifying such bugs
though, and the cause is likely easily visible in the patch series
that causes the failure. So overall the shorter running time is
considered the more important factor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Add the tree check to test_device_intro_none() and
test_device_intro_abstract(), too, just to be sure...]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710060719.22386-1-thuth@redhat.com>
These can be quite big so lets cache them. I couldn't find any nots on
ccache in the gitlab docs so I've just ignored it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-36-alex.bennee@linaro.org>
Switch to building in the new debian-all-test-cross image which has
most of the cross compilers inline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-35-alex.bennee@linaro.org>
Given we assert the requested address matches what we asked we should
also make that clear in the mmap flags. Otherwise we see failures in
the GitLab environment for some currently unknown but allowable
reason. We use MAP_FIXED_NOREPLACE if we can so we don't just clobber
an existing mapping. Also include the strerror string for a bit more
info on failure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-34-alex.bennee@linaro.org>
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
This fails on GitLab but not when run locally on the same container
image. It's very confusing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-30-alex.bennee@linaro.org>
For some reason these tests fail all the time on GitLab. I can
re-create the hang around 3% of the time locally but it doesn't seem
to be MTTCG related. For now skipIf on GITLAB_CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701135652.1366-29-alex.bennee@linaro.org>
The old path doesn't exist but the rx-virt.dtb file has the same
checksum so lets use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-28-alex.bennee@linaro.org>
Currently the test takes more the 900 seconds on GitLab and then times
out. Running on Travis seems to be OK.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-27-alex.bennee@linaro.org>
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-26-alex.bennee@linaro.org>
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-25-alex.bennee@linaro.org>
According to the documentation to be able to use --cache-from for
remote registries you need to enable both buildkit and inline the
metadata. We want to do this to support pulling from gitlab when users
build their local docker images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-24-alex.bennee@linaro.org>
Now that we're building standard container images from
dockerfiles in tests/docker/dockerfiles, we can convert
the build jobs to use them. The key benefit of this is
that a contributor can now more easily replicate the CI
environment on their local machine. The container images
are cached too, so we are not spending time waiting for
the apt-get/dnf package installs to complete.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-4-berrange@redhat.com>
[AJB: tweak naming convention]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-23-alex.bennee@linaro.org>
We have a number of container images in tests/docker/dockerfiles
that are intended to provide well defined environments for doing
test builds. We want our CI system to use these containers too.
This introduces builds of all of them as the first stage in the
CI, so that the built containers are available for later build
jobs. The containers are setup to use the GitLab container
registry as the cache, so we only pay the penalty of the full
build when the dockerfiles change. The main qemu-project/qemu
repo is used as a second cache, so that users forking QEMU will
see a fast turnaround time on their CI jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-3-berrange@redhat.com>
[AJB: tweak the tag format]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-22-alex.bennee@linaro.org>
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
Message-Id: <20200701135652.1366-21-alex.bennee@linaro.org>
The edk2.yml and opensbi.yml files have recently been moved/renamed,
but the change has not been reflected in the rules in the YML files
yet.
Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200625151627.24986-1-thuth@redhat.com>
Message-Id: <20200701135652.1366-20-alex.bennee@linaro.org>
The sooner we deprecate in-tree builds the sooner this mess of regexes
can be thrown away.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-19-alex.bennee@linaro.org>
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-17-alex.bennee@linaro.org>
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
We add the ConsoleSocket object, which has a socket interface
and which will consume all arriving characters on the
socket, placing them into an in memory buffer.
This will also provide those chars via recv() as
would a regular socket.
ConsoleSocket also has the option of dumping
the console bytes to a log file.
We also give QEMUMachine the option of using ConsoleSocket
to drain and to use for logging console to a file.
By default QEMUMachine does not use ConsoleSocket.
This is added in preparation for use by basevm.py in a later commit.
This is a workaround we found was needed for basevm.py since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-13-alex.bennee@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
This is a cleanup patch to follow-up the patch which introduced TSAN.
This patch makes separate start_switch_fiber_ functions for TSAN and ASAN.
This does two things:
1. Unrelated ASAN and TSAN code is separate and each function only
has arguments that are actually needed.
2. The co->tsan_caller_fiber and co->tsan_co_fiber fields are only
access from within #ifdef CONFIG_TSAN.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626170001.27017-1-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-5-alex.bennee@linaro.org>
The configure test for 'secret_keyring' incorrectly checked the
'have_keyring' variable.
Fixes: 54e7aac056
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200618092636.71832-1-david.edmondson@oracle.com>
Message-Id: <20200701135652.1366-4-alex.bennee@linaro.org>
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.
This commit is generated by command
sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-9-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). Fix several such cases, e.g. in nbd_read().
This commit is generated by command
sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). Fix such a case in
v9fs_device_realize_common().
This commit is generated by command
sed -n '/^virtio-9p$/,/^$/{s/^F: //p}' MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-7-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.
This commit is generated by command
sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-6-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again. Coccinelle script rerun for commit 3203148917
"hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.
This commit is generated by command
sed -n '/^Parallel NOR Flash devices$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-5-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
