Fixes a clone() emulation bug were the new thread starts
at the point of the syscall and thus clones in a loop.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Avoid speculatively computing flags before every potentially trapping
operation and instead do the flags computation when a trap actually
occurs. This gives approximately 30% speedup in emulation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
pread64 and pwrite64 pass 64bit parameters which for some architectures need
to be aligned to special argument pairs, creating a gap argument.
Handle this special case the same way we handle it in other places of the code.
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Alex Barcelo <abarcelo@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The SysV PPC32 ABI dictates that long long (64bit) parameters are pass in odd/even
register pairs. Because unlike ARM and MIPS we start at an odd register number,
we can reuse the same aligning code that ARM and MIPS use.
Clarified inline comment that it is SysV ABI that requires long long aligned
parameters - Riku
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the attempt to load the guest executable fails, print the
error message as a string, not a number. This requires us to
fix a couple of places in loader_exec() where we were returning
-1 instead of a valid negative errno.
The change allows us to drop the "Unknown binary format" message
because the strerror-enhanced message is now a more self-explanatory
"Error while loading $guest-binary: Exec format error".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Compare signal numbers in the proper domain.
Convert all of the fields for SIGIO and SIGCHLD.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Validate count between 0 and IOV_MAX. Limit total length of
operation in the same way the kernel does.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When reading our faked /proc/self/maps from a secondary thread,
we get an invalid stack entry. This is because ts->stack_base is not
initialized in non-primary threads.
However, ts->info is, and the stack layout information we're looking
for is there too. So let's use that one instead!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The statfs syscall should always memset(0) its full struct extent before
writing to it. Newer versions of the syscall use one of the reserved fields
for flags, which would otherwise get stale values from uncleaned memory.
This fixes libarchive for me, which got confused about the return value of
pathconf("/", _PC_REC_XFER_ALIGN) otherwise, as it some times gave old pointers
as return value.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Remove two uses of strdup (use g_path_get_basename instead),
and add a comment that this strncpy use is ok.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
w32: Always use standard instead of native format strings
net/socket: Fix compiler warning (regression for MinGW)
linux-user: Remove redundant null check and replace free by g_free
qemu-timer: simplify qemu_run_timers
TextConsole: saturate escape parameter in TTY_STATE_CSI
curses: don't initialize curses when qemu is daemonized
dtrace backend: add function to reserved words
pflash_cfi01: Fix warning caused by unreachable code
ioh3420: Remove unreachable code
lm4549: Fix buffer overflow
cadence_uart: Fix buffer overflow
qemu-sockets: Fix potential memory leak
qemu-ga: Remove unreachable code after g_error
target-i386: Allow tsc-frequency to be larger then 2.147G
Report from smatch:
linux-user/syscall.c:3632 do_ioctl_dm(220) info:
redundant null check on big_buf calling free()
'big_buf' was allocated by g_malloc0, therefore free was also
replaced by g_free.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
When host and target have differing alignment rules, using a cast
and direct memory operation can result in SIGBUS. Use memcpy instead,
which the compiler will happily optimize when alignment is satisfied.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Remove the cpu_get_real_ticks() definition from linux-user/main.c.
This has been disabled via #if 0 and unused since commit 1dce7c3c22
in 2006; the definitions we actually use are in qemu-timer.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that we default to reserving nearly 4GB of RAM for the guest
address space when running a 32 bit linux-user guest on 64 bit
hosts, users are much more likely to run into it. Reword the
message to be more informative about what failed and provide
suggestions for how to fix things.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In case when TARGET_ABI_BITS == 32 && HOST_LONG_BITS == 64, the last
byte of the target dirent structure (aka d_type byte) was never copied
from the host dirent structure, thus breaking everything that relies
on valid d_type value, e.g. glob(3).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Declare arg_table to be "static const", and adjust the two users
to also be const.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Also, use g_malloc to avoid NULL-deref upon OOM.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.
This fixes executing go_bootstrap while building go for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver. This way the reserved guest memory space can
be probed for. Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current bss clear logic assumes the target mmap address and host
address are the same. Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code to initialise the target_to_host_errno_table[] array was
accidentally inside the loop through checking and initialising all
the supported ioctls. This was harmless but meant that we reinitialised the
array several hundred times on startup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the SNDCTL_DSP_MAP{IN,OUT}BUF ioctl definitions so that they
refer to a suitably defined target struct layout rather than hardcoding
the ioctl number. This fixes complaints from the syscall_init()
consistency check when running an x86_64-to-x86_64 linux-user qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definitions for the ioctl numbers TARGET_BLKBSZGET and
TARGET_BLKBSZSET had the wrong size parameters (they are defined
with size_t, not int, even though the ioctl implementations themselves
read and write integers). Since commit 354a0008 we now have an
ioctl wrapper definition for BLKBSZGET and so on an x86-64-to-x86-64
linux-user binary we were triggering the mismatch warning in
syscall_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions. Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If we let the kernel handle the implementation of mmap_find_vma,
via an anon mmap, we must use the size as indicated by the user
and not the size truncated to the filesize.
This happens often in ld.so, where we initially mmap the file to
the size of the text+data+bss to reserve an area, then mmap+fixed
over the top to properly handle data and bss.
Signed-off-by: Richard Henderson <rth@twiddle.net>
For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
