Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230419163457.17175-1-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "optarg" parameter is completely unused, so let's drop it.
Message-Id: <20230419124831.678079-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing that depends on target specific macros in this
file, so we can move it to the common source set to avoid that
we have to compile this file multiple times (one time for each
target).
Message-Id: <20230413182636.139356-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
dirtylimit.c just uses one TARGET_PAGE_SIZE macro - change it to
qemu_target_page_size() so we can move thefile into the target
independent source set. Then we only have to compile this file
once during the build instead of multiple times (one time for
each target).
Message-Id: <20230413054509.54421-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The target checks here are only during the initialization, so they
are not performance critical. We can switch these to runtime checks
to avoid that we have to compile this file multiple times during
the build, and make the code ready for an universal build one day.
Message-Id: <20230412163501.36770-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code in this file is not performance critical, so we can use
the target independent endianess functions to only compile this
file once for all targets.
Message-Id: <20230411183418.1640500-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In some cases of target independent code, it would be useful to have access
to the functions that swap endianess in case it differs between guest and
host. Thus re-implement the tswapXX() functions in a new header that can be
included separately. The check whether the swapping is needed continues to
be done at compile-time for target specific code, while it is done at
run-time in target-independent code.
Message-Id: <20230411183418.1640500-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ideally, qtest.c should be independent from target specific code, so
we only have to compile it once for all targets. Thus start improving
the situation by moving the pseries related code to hw/ppc/spapr_rtas.c
instead and allow target code to register a callback handler for such
target specific commands.
Message-Id: <20230411183418.1640500-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code for these two devices seems to be independent from any
target specific macros. "riscv_htif.c" is used for both, riscv32 and
riscv64, so by moving this to the common code source set, we can
avoid to compile it twice every time.
"goldfish_tty.c" is only used for one target at the moment, but
since it is a paravirtualized device, it could get useful for other
targets one day, so let's move it now, too.
Message-Id: <20230411173206.1511621-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to get rid of the "#ifdef TARGET_X86_64" compile-time switch
in the long run, so we can drop the separate compilation of the
"qemu-system-i386" binary one day - but we then still need a way to
run a guest with max. CPU settings in 32-bit mode. So the "max" CPU
should determine its family/model/stepping settings according to the
"large mode" (LM) CPU feature bit during runtime, so that it is
possible to run "qemu-system-x86_64 -cpu max,lm=off" and still get
a sane family/model/stepping setting for the guest CPU.
To be able to check the LM bit, we have to move the code that sets
up these properties to a "realize" function, since the LM setting is
not available yet when the "instance_init" function is being called.
Message-Id: <20230306154311.476458-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit fd8171fe52b5e("target/hexagon: import lexer for idef-parser") the
hexagon target uses 'flex', 'bison' to generate idef-parser. However default
travis builder image for 'focal' may not have these pre-installed, consequently
following error is seen with travis when trying to execute the 'GCC (user)' job
that also tries to build hexagon user binary:
<snip>
export CONFIG="--disable-containers --disable-system"
<snip>
Program flex found: NO
../target/hexagon/meson.build:179:4: ERROR: Program 'flex' not found or not
executable
<snip>
Fix this by explicitly add 'flex' and 'bison' to the list of addon apt-packages
for the 'GCC (user)' job.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-Id: <20230417162354.186678-1-vaibhav@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So that we can avoid the "older gdb crashes" problem described in
commit 5787d17a42 and which caused us to disable reporting pauth
information via the gdbstub, newer gdb is going to implement support
for recognizing the pauth information via a new feature name:
org.gnu.gdb.aarch64.pauth_v2
Older gdb won't recognize this feature name, so we can re-enable the
pauth support under the new name without risking them crashing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230406150827.3322670-1-peter.maydell@linaro.org
In rST markup syntax, the inline markup (*italics*, **bold** and
``monospaced``) must be separated from the surrending text by
non-word characters, otherwise it is not interpreted as markup.
To force interpretation as markup in the middle of a word,
you need to use a backslash-escaped space (which will not
appear as a space in the output).
Fix a missing backslash-space in this file, which meant that the ``
after "select" was output literally and the monospacing was
incorrectly extended all the way to the end of the next monospaced
word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230411105424.3994585-1-peter.maydell@linaro.org
FEAT_PAN3 adds an EPAN bit to SCTLR_EL1 and SCTLR_EL2, which allows
the PAN bit to make memory non-privileged-read/write if it is
user-executable as well as if it is user-read/write.
Implement this feature and enable it in the AArch64 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-4-peter.maydell@linaro.org
The syndrome value reported to ESR_EL2 should only contain the
detailed instruction syndrome information when the fault has been
caused by a stage 2 abort, not when the fault was a stage 1 abort
(i.e. caused by execution at EL2). We were getting this wrong and
reporting the detailed ISV information all the time.
Fix the bug by checking fi->stage2. Add a TODO comment noting the
cases where we'll have to come back and revisit this when we
implement FEAT_LS64 and friends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-3-peter.maydell@linaro.org
We already pass merge_syn_data_abort() two fields from the
ARMMMUFaultInfo struct, and we're about to want to use a third field.
Refactor to just pass a pointer to the fault info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230331145045.2584941-2-peter.maydell@linaro.org
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A7 core is only available when TCG is enabled (see
commit 80485d88f9 "target/arm: Restrict v7A TCG cpus to TCG accel").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230405100848.76145-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the limit check. If the limit is less than the compare value,
the timer can never reach this value, thus it will never fire.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1491
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-2@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue reported by Coverity.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-1@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cubieboard tests end with comment "reboot not functioning; omit test".
Fix this so reboot is done at the end of each test.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-5-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-H3 and Orangepi-PC.
WDT is added as an overlay to the Timer module memory area.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-4-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds WDT to Allwinner-A10 and Cubieboard.
WDT is added as an overlay to the Timer module memory map.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds basic support for Allwinner WDT.
Both sun4i and sun6i variants are supported.
However, interrupt generation is not supported, so WDT can be used only to trigger system reset.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-2-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One of the debug printfs in exynos4210_gcomp_find() will
access outside the 's->g_timer.reg.comp[]' array if there
was no active comparator and 'res' is -1. Add a conditional
to avoid this.
This doesn't happen in normal use because the debug printfs
are by default not compiled in.
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Message-id: 20230404074506.112615-1-jiangfeng@kylinos.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Adjusted commit message to clarify that the overrun
only happens if you've enabled debug printfs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230409200526.1156456-1-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since OpenSUSE Leap 15 counts as a single major release of an LTS distribution,
lcitool has changed the target name to remove the minor version. Adjust the
mappings and refresh script.
This also updates the dockerfile to 15.4, since the 15.3 version is EOL now:
https://get.opensuse.org/leap/15.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <a408b7f241ac59e5944db6ae2360a792305c36e0.1681735482.git.pkrempa@redhat.com>
[Adjust for target name change and reword commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update to commit which has fixes needed for OpenSUSE 15.4 and
re-generate output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <bd11b5954d3dd1e989699370af2b9e2e0c77194a.1681735482.git.pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently when configure picks an ObjectiveC compiler it doesn't pay
attention to the cross-prefix. This isn't a big deal in practice,
because we only use ObjC on macos and you can't cross-compile to
macos. But it's a bit inconsistent.
Rearrange the handling of objcc in configure so that we do the
same thing that we do with cc and cxx. This means that the logic
for picking the ObjC compiler goes from:
if --objcc is specified, use that
otherwise if clang is available, use that
otherwise use $cc
to:
if --objcc is specified, use that
otherwise if --cross-prefix is specified, use ${cross_prefix}clang
otherwise if clang is available, use that
otherwise use $cc
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1185
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230418161554.744834-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Fedora CI and coverity runs are using a slightly different set of
packages. Copy most of the content over from tests/docker while
keeping the commands at the end that unpack the tools.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230331174844.376300-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exp->common.blk cannot be NULL, nbd_export_delete() is only called (through
a bottom half) from blk_exp_unref() and in turn that can only happen
after blk_exp_add() has asserted exp->blk != NULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for smp_read_barrier_depends() does not mention the architectures
for which it is an optimization, for example ARM and PPC. As a result, it is not
clear to the reader why one would use it. Relegate Alpha to a footnote together
with other architectures where it is equivalent to smp_rmb().
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It does not even pair with a qatomic_mb_set(), so it is clearer to use
load-acquire in this case; they are synonyms.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is already a barrier in AIO_WAIT_WHILE_INTERNAL(), thus the
qatomic_mb_read() is not adding anything.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch wrongly replaced FEAT_XSAVE_XCR0_{LO|HI} with
FEAT_XSAVE_XSS_{LO|HI} in CPUID(EAX=12,ECX=1):{ECX,EDX}. As a result,
SGX enclaves only supported SSE and x87 feature (xfrm=0x3).
Fixes: 301e90675c ("target/i386: Enable support for XSAVES based features")
Signed-off-by: Yang Zhong <yang.zhong@linux.intel.com>
Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20230406064041.420039-1-yang.zhong@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coroutine commands have to be declared as coroutine_fn, but the
marker does not show up in the qapi-comands-* headers; likewise, the
marshaling function calls the command and therefore must be coroutine_fn.
Static analysis would want coroutine_fn to match between prototype and
declaration, because in principle coroutines might be compiled to a
completely different calling convention. So we would like to add the
marker to the header.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases (for example gen_compute_branch_nm in
nanomips_translate.c.inc) registers can be unused
on some paths and a negative value is passed in that case:
gen_compute_branch_nm(ctx, OPC_BPOSGE32, 4, -1, -2,
imm << 1);
To avoid an out of bounds access in those cases, introduce
assertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hexagon is split into two components because it has hundreds of false positives
in the generated files.
capstone and slirp have been removed.
hw/nvme is added to block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migrate rtc_ref (which only needs to be 32-bit because it is summed to
a 32-bit register), which requires bumping the migration version.
The HPPA machine does not have versioned machine types so it is okay
to block migration to old versions of QEMU.
While at it, drop the write-only field rtc from LasiState.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains (CID 1507880) that the declaration "int error_code;"
in mmu_translate() is unreachable code. Since this is only a declaration,
this isn't actually a bug, but:
* it's a bear-trap for future changes, because if it was changed to
include an initialization 'int error_code = foo;' then the
initialization wouldn't actually happen (being dead code)
* it's against our coding style, which wants declarations to be
at the start of blocks
* it means that anybody reading the code has to go and look up
exactly what the C rules are for skipping over variable declarations
using a goto
Move the declaration to the top of the function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230406155946.3362077-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The configure script used to compile some code which dereferences memory
with ubsan to verify the compiler can link with ubsan library which
detects dereferencing of uninitialized memory. However, as the
dereferenced memory was allocated in the same code, GCC can statically
detect the unitialized memory dereference and emit maybe-uninitialized
warning. If -Werror is set, this becomes an error, and the configure
script incorrectly thinks the error indicates the compiler cannot use
ubsan.
Fix this error by replacing the code with another function which adds
1 to a signed integer argument. This brings in ubsan to detect if it
causes signed integer overflow. As the value of the argument cannot be
statically determined, the new function is also immune to compiler
warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230405070030.23148-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If hostlen is zero, there is a possibility that addrstr[hostlen - 1]
underflows and, if a closing bracked is there, hostlen - 2 is passed
to g_strndup() on the next line. If websocket==false then
addrstr[0] would be a colon, but if websocket==true this could in
principle happen.
Fix it by checking hostlen.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
