preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch prepares for the subsequent patches.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add options for specifying the size of the metadata caches. This can
either be done directly for each cache (if only one is given, the other
will be derived according to a default ratio) or combined for both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qcow2 block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
It returns a multiple of the sector size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Aside: a few of these callers don't handle errors. I didn't
investigate whether they should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduced in commit 5a8a30d. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.
This does not touch DEBUG output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.
Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables. Each QCowL2Meta describes one L2 table update. This is a
rare case in preallocate() but can happen.
This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas. Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies. preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.
Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
qcow2_open() causes writes when repairing an image with the dirty flag
set and when clearing autoclear flags. It shouldn't do this when another
qemu instance is still actively working on this image file.
One effect of the bug is that images may have a cleared dirty flag while
the migration source host still has it in use with lazy refcounts
enabled, so refcounts are not accurate and the dirty flag must remain
set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of manually building a list of all options from BDRVQcowState
values just reuse the options that were used to open the image.
qcow2_open() won't fully use all of the options in the QDict, but that's
okay.
This fixes all of the driver-specific options in qcow2, except for
lazy-refcounts, which was special cased before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In the case of a metadata preallocation with a large cluster size,
qcow2_alloc_cluster_offset() can allocate nothing and returns a
NULL l2meta. This patch checks for it and link2 l2 with only valid
l2meta.
Replace 9 and 512 with BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE
respectively while at the function.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
n_start can be actually calculated from offset. The number of
sectors to be allocated(n_end - n_start) can be passed in in
num. By removing n_start and n_end, we can save two parameters.
The side effect is there is a bug in qcow2.c:preallocate() that
passes incorrect n_start to qcow2_alloc_cluster_offset() is
fixed. The bug can be triggerred by a larger cluster size than
the default value(65536), for example:
./qemu-img create -f qcow2 \
-o 'cluster_size=131072,preallocation=metadata' file.img 4G
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QCOW2 .bdrv_make_empty implementation always returns 0 for success,
but does not actually do anything.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Strictly speaking, this is only required for has_zero_init() == false,
but it's easy enough to just do a cluster-aligned write that is padded
with zeros after the header.
This fixes that after 'qemu-img create' header extensions are attempted
to be parsed that are really just random leftover data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will let misaligned but large requests use zero clusters. This
is important because the cluster size is not guest visible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
