There is no LPES0 in BookE and no MSR_HV.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The SRR1 should be set to the MSR value. There are no diagnostic bits
in the SRR1 for BookE.
Note that this fixes a bug where MSR_GS would be set and Linux would
go into KVM code when there's no KVM guest.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR or DAR in BookE. Change to ESR and DEAR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in BookE.
Also remove 40x code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookE CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This CPU was partially removed due to lack of support in 2017 by commit
aef7796057 ("ppc: remove non implemented cpu models").
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220128221611.1221715-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A mostly generic test for unaligned access raising SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.
This inline code expansion is somewhat large, but it takes quite
a few instructions to make a function call to a helper anyway.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to mapping changes, we now rarely place the code_gen_buffer
near the main executable. Which means that direct calls will
now rarely be in range.
So, always use indirect calls for tail calls, which allows us to
avoid clobbering %o7, and therefore we need not save and restore it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 7ecd02a06f, if patch_reloc fails we restart translation
with a smaller TB. SPARC had its function signature changed,
but not the logic. Replace assert with return false.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had code for checking for 13 and 21-bit shifted constants,
but we can do better and allow 32-bit shifted constants.
This is still 2 insns shorter than the full 64-bit sequence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow us to control exactly what scratch register is
used for loading the constant.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Handle 32-bit constants with a separate function, so that
tcg_out_movi_int does not need to recurse. This slightly
rearranges the order of tests for small constants, but
produces the same output.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When BH is constant, it is constrained to 11 bits for use in MOVCC.
For the cases in which we must load the constant BH into a register,
we do not need the full logic of tcg_out_movi; we can use the simpler
function for emitting a 13 bit constant.
This eliminates the only case in which TCG_REG_T2 was passed to
tcg_out_movi, which will shortly become invalid.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use the routines just added for user-only to emit
unaligned accesses in softmmu mode too.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.
Fortunately, the ISA contains pairs of instructions that are
used to implement unaligned memory accesses. Use them.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reserve a register for the guest_base using aarch64 for reference.
By doing so, we do not have to recompute it for every memory load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From armv6, the architecture supports unaligned accesses.
All we need to do is perform the correct alignment check
in tcg_out_tlb_read.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly allow the use of unaligned memory accesses,
and these require proper alignment. Use get_alignment_bits
to verify and remove USING_SOFTMMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for unaligned accesses is difficult for pre-v6 hosts.
While debian still builds for armv4, we cannot use a compile
time test, so test the architecture at runtime and error out.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220106134238.3936163-1-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apparently we were left behind; just renaming MO_Q to MO_UQ is enough.
Fixes: fc313c6434 ("exec/memop: Adding signedness to quad definitions")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220206162106.1092364-1-i.qemu@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit aff0e204cb introduced CF_NOIRQ usage,
but one case was forgotten. Record/replay uses one special TB which is not
really executed, but used to cause a correct exception in replay mode.
This patch adds CF_NOIRQ flag for such block.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <164362834054.1754532.7678416881159817273.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of taking the lock of the cpu work list in order to check if it's
empty, we can just read the head pointer atomically. This decreases
cpu_work_list_empty's share from 5% to 1.3% in a profile of icount-enabled
aarch64-softmmu.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Message-Id: <20220114004358.299534-1-idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the length of the range is large enough, clearing the whole cache is
faster than iterating over the (possibly extremely large) set of pages
contained in the range.
This mimics the pre-existing similar optimization done on the flush of the
tlb itself.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Message-Id: <20220110164754.1066025-1-idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sparc64 is unique on linux in *not* passing ucontext_t as
the third argument to a SA_SIGINFO handler. It passes the
old struct sigcontext instead.
Set both pc and npc in host_signal_set_pc.
Fixes: 8b5bd46193 ("linux-user/host/sparc: Populate host_signal.h")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not support sparc32 as a host, so there's no point in
sparc64 redirecting to sparc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not directly access ucontext_t as the third signal parameter.
This is preparation for a sparc64 fix.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not directly access the uc_sigmask member.
This is preparation for a sparc64 fix.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the "retl" instead of "ret" instruction alias, since we
do not allocate a register window in this function.
Fix the offset to the first stacked parameter, which lies
beyond the register window save area.
Fixes: 95c021dac8 ("linux-user/host/sparc64: Add safe-syscall.inc.S")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Fix handling of SVE ZCR_LEN when using VHE
* xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs
* Don't ever enable PSCI when booting guest in EL3
* Adhere to SMCCC 1.3 section 5.2
* highbank: Fix issues with booting SMP
* midway: Fix issues booting at all
* boot: Drop existing dtb /psci node rather than retaining it
* versal-virt: Always call arm_load_kernel()
* force flag recalculation when messing with DAIF
* hw/timer/armv7m_systick: Update clock source before enabling timer
* hw/arm/smmuv3: Fix device reset
* hw/intc/arm_gicv3_its: refactorings and minor bug fixes
* hw/sensor: Add lsm303dlhc magnetometer device
-----BEGIN PGP SIGNATURE-----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=fb4F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220208' into staging
target-arm queue:
* Fix handling of SVE ZCR_LEN when using VHE
* xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs
* Don't ever enable PSCI when booting guest in EL3
* Adhere to SMCCC 1.3 section 5.2
* highbank: Fix issues with booting SMP
* midway: Fix issues booting at all
* boot: Drop existing dtb /psci node rather than retaining it
* versal-virt: Always call arm_load_kernel()
* force flag recalculation when messing with DAIF
* hw/timer/armv7m_systick: Update clock source before enabling timer
* hw/arm/smmuv3: Fix device reset
* hw/intc/arm_gicv3_its: refactorings and minor bug fixes
* hw/sensor: Add lsm303dlhc magnetometer device
# gpg: Signature made Tue 08 Feb 2022 11:39:15 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220208: (39 commits)
hw/sensor: Add lsm303dlhc magnetometer device
hw/intc/arm_gicv3_its: Split error checks
hw/intc/arm_gicv3_its: Don't allow intid 1023 in MAPI/MAPTI
hw/intc/arm_gicv3_its: In MAPC with V=0, don't check rdbase field
hw/intc/arm_gicv3_its: Drop TableDesc and CmdQDesc valid fields
hw/intc/arm_gicv3_its: Make update_ite() use ITEntry
hw/intc/arm_gicv3_its: Pass ITE values back from get_ite() via a struct
hw/intc/arm_gicv3_its: Avoid nested ifs in get_ite()
hw/intc/arm_gicv3_its: Fix address calculation in get_ite() and update_ite()
hw/intc/arm_gicv3_its: Pass CTEntry to update_cte()
hw/intc/arm_gicv3_its: Keep CTEs as a struct, not a raw uint64_t
hw/intc/arm_gicv3_its: Pass DTEntry to update_dte()
hw/intc/arm_gicv3_its: Keep DTEs as a struct, not a raw uint64_t
hw/intc/arm_gicv3_its: Use address_space_map() to access command queue packets
hw/arm/smmuv3: Fix device reset
hw/timer/armv7m_systick: Update clock source before enabling timer
arm: force flag recalculation when messing with DAIF
hw/arm: versal-virt: Always call arm_load_kernel()
hw/arm/boot: Drop existing dtb /psci node rather than retaining it
hw/arm/boot: Drop nb_cpus field from arm_boot_info
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In most of the ITS command processing, we check different error
possibilities one at a time and log them appropriately. In
process_mapti() and process_mapd() we have code which checks
multiple error cases at once, which means the logging is less
specific than it could be. Split those cases up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-14-peter.maydell@linaro.org
When handling MAPI/MAPTI, we allow the supplied interrupt ID to be
either 1023 or something in the valid LPI range. This is a mistake:
only a real valid LPI is allowed. (The general behaviour of the ITS
is that most interrupt ID fields require a value in the LPI range;
the exception is that fields specifying a doorbell value, which are
all in GICv4 commands, allow also 1023 to mean "no doorbell".)
Remove the condition that incorrectly allows 1023 here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-13-peter.maydell@linaro.org
In the MAPC command, if V=0 this is a request to delete a collection
table entry and the rdbase field of the command packet will not be
used. In particular, the specification says that the "UNPREDICTABLE
if rdbase is not valid" only applies for V=1.
We were doing a check-and-log-guest-error on rdbase regardless of
whether the V bit was set, and also (harmlessly but confusingly)
storing the contents of the rdbase field into the updated collection
table entry. Update the code so that if V=0 we don't check or use
the rdbase field value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-12-peter.maydell@linaro.org
Currently we track in the TableDesc and CmdQDesc structs the state of
the GITS_BASER<n> and GITS_CBASER Valid bits. However we aren't very
consistent abut checking the valid field: we test it in update_cte()
and update_dte(), but not anywhere else we look things up in tables.
The GIC specification says that it is UNPREDICTABLE if a guest fails
to set any of these Valid bits before enabling the ITS via
GITS_CTLR.Enabled. So we can choose to handle Valid == 0 as
equivalent to a zero-length table. This is in fact how we're already
catching this case in most of the table-access paths: when Valid is 0
we leave the num_entries fields in TableDesc or CmdQDesc set to zero,
and then the out-of-bounds check "index >= num_entries" that we have
to do anyway before doing any of these table lookups will always be
true, catching the no-valid-table case without any extra code.
So we can remove the checks on the valid field from update_cte()
and update_dte(): since these happen after the bounds check there
was never any case when the test could fail. That means the valid
fields would be entirely unused, so just remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-11-peter.maydell@linaro.org
Make the update_ite() struct use the new ITEntry struct, so that
callers don't need to assemble the in-memory ITE data themselves, and
only get_ite() and update_ite() need to care about that in-memory
layout. We can then drop the no-longer-used IteEntry struct
definition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-10-peter.maydell@linaro.org
In get_ite() we currently return the caller some of the fields of an
Interrupt Table Entry via a set of pointer arguments, and validate
some of them internally (interrupt type and valid bit) to return a
simple true/false 'valid' indication. Define a new ITEntry struct
which has all the fields that the in-memory ITE has, and bring the
get_ite() function in to line with get_dte() and get_cte().
This paves the way for handling virtual interrupts, which will want
a different subset of the fields in the ITE. Handling them under
the old "lots of pointer arguments" scheme would have meant a
confusingly large set of arguments for this function.
The new struct ITEntry is obviously confusably similar to the
existing IteEntry struct, whose fields are the raw 12 bytes
of the in-memory ITE. In the next commit we will make update_ite()
use ITEntry instead of IteEntry, which will allow us to delete
the IteEntry struct and remove the confusion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-9-peter.maydell@linaro.org
