The addition of uxl support in gdbstub adds a few checks on the maximum
register length, but omitted MXL_RV128, an experimental feature.
This patch makes rv128 react as rv64, as previously.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220124202456.420258-1-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The documentation for the generic loader says that "the maximum size of
the data is 8 bytes". However, attempts to set data-len=8 trigger the
following assertion failure:
../hw/core/generic-loader.c:59: generic_loader_reset: Assertion `s->data_len < sizeof(s->data)' failed.
The type of s->data is uint64_t (i.e. 8 bytes long), so I believe this
assert should use <= instead of <.
Fixes: e481a1f63c ("generic-loader: Add a generic loader")
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120092715.7805-1-ptesarik@suse.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch removes the left-over/unused `ibex_plic.h` file. Previously
used by opentitan, which now follows the RISC-V standard and uses the
SiFivePlicState.
Fixes: 434e7e021 ("hw/intc: Remove the Ibex PLIC")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220121055005.3159846-1-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- fix CVE-2021-3929
- add zone random write area support
- misc cleanups from Philippe
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmIKDF4ACgkQTeGvMW1P
DenhhQgAm8bq39EIaNfVswdHW2ggPfwZHR0udzDoUaOadc0HnS8UMm13//pOtYrs
fLs6YcUQNdPnRvkOsodfvN8Jw+oxkPudvhdFxWCLqgHIrm6+JeY3VCuDvvvt5Q0z
3gSMOSLTY1Yb8/tIJvDXK6xx7LjDbxpaDfkL4QsatTfzUcCR6joIlmZTsIoYMi7x
e+Ag0Nu56QxpP9amzAWVzNuLt3UYcAZaeJ1v1figrijKw27Wgh7CXWlJsFoZrWwa
KsC6zDn80PgHTWZueQIag5zeQHC2V5/kExx5hA7lYaO48F1JveVwQttiVgW1lXjR
aGmn6mB6PANNiAEdBEf6CBX60PiwYQ==
=pn4q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging
hw/nvme updates
- fix CVE-2021-3929
- add zone random write area support
- misc cleanups from Philippe
# gpg: Signature made Mon 14 Feb 2022 08:01:34 GMT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* remotes/nvme/tags/nvme-next-pull-request:
hw/nvme: add support for zoned random write area
hw/nvme: add ozcs enum
hw/nvme: add struct for zone management send
hw/nvme/ctrl: Pass buffers as 'void *' types
hw/nvme/ctrl: Have nvme_addr_write() take const buffer
hw/nvme: fix CVE-2021-3929
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJiCdGyAAoJEO8Ells5jWIRWL8H/2XOuuv9JJYqboCVPWSpltch
FgTh2SHWbQueo70xxxIzRbM2RN/G9Eu+4LnpMw+ZRJA6EY6QgNYmgVFbyV1eTkxG
f0qUyCliCPWzZEZ4GLJ7JOSuHpU4rZ90e5IKuGhtD+yrfT+L0Re1TyluZdWEniOp
tz6daq31jkF870iPn7X9QOTW0JBcK5ww7Qv5BThAoUmCOq6BMBFxg+xFNto9a5S7
UjADfhZiqNIbks5hfpldr9g2F2LcBNeSHWOAxhEi24IEaV7AcL2/1B3EZhfMcA/O
hcbw1oKcJ3anpAD6Ukwy4KnyrZNv1M7wtiN9XkAKKu6idIzrHuIju9j7TOKkxt4=
=M6Ok
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 14 Feb 2022 03:51:14 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/eth: Don't consider ESP to be an IPv6 option header
hw/net: e1000e: Clear ICR on read when using non MSI-X interrupts
net/filter: Optimize filter_send to coroutine
net/colo-compare.c: Update the default value comments
net/colo-compare.c: Optimize compare order for performance
net: Fix uninitialized data usage
net/tap: Set return code on failure
hw/net/vmxnet3: Log guest-triggerable errors using LOG_GUEST_ERROR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
-----BEGIN PGP SIGNATURE-----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=/1qA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging
Block layer patches
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
# gpg: Signature made Fri 11 Feb 2022 17:44:52 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kwolf-gitlab/tags/for-upstream:
hw/block/fdc-isa: Respect QOM properties when building AML
iotests: Test blockdev-reopen with iothreads and throttling
block: Lock AioContext for drain_end in blockdev-reopen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coroutine pool size was 64 from long ago, and the basis was organized in the commit message in 4d68e86b.
At that time, virtio-blk queue-size and num-queue were not configuable, and equivalent values were 128 and 1.
Coroutine pool size 64 was fine then.
Later queue-size and num-queue got configuable, and default values were increased.
Coroutine pool with size 64 exhausts frequently with random disk IO in new size, and slows down.
This commit adjusts coroutine pool size adaptively with new values.
This commit adds 64 by default, but now coroutine is not only for block devices,
and is not too much burdon comparing with new default.
pool size of 128 * vCPUs.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Message-id: 20220214115302.13294-2-hnarukaw@yahoo-corp.jp
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's a nice new Rust implementation out there; recommend people
do new work on that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220210174714.19843-1-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtiofsd currently crashes when used with glibc 2.35.
That is due to the rseq system call being added to every thread
creation [1][2].
[1]: https://www.efficios.com/blog/2019/02/08/linux-restartable-sequences/
[2]: https://sourceware.org/pipermail/libc-alpha/2022-February/136040.html
This happens not at daemon start, but when a guest connects
/usr/lib/qemu/virtiofsd -f --socket-path=/tmp/testvfsd -o sandbox=chroot \
-o source=/var/guests/j-virtiofs --socket-group=kvm
virtio_session_mount: Waiting for vhost-user socket connection...
# start ok, now guest will connect
virtio_session_mount: Received vhost-user socket connection
virtio_loop: Entry
fv_queue_set_started: qidx=0 started=1
fv_queue_set_started: qidx=1 started=1
Bad system call (core dumped)
We have to put rseq on the seccomp allowlist to avoid that the daemon
is crashing in this case.
Reported-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20220209111456.3328420-1-christian.ehrhardt@canonical.com
[Moved rseq to its alphabetically ordered position in the seccomp
allowlist.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for TP 4076 ("Zoned Random Write Area"), v2021.08.23
("Ratified").
This adds three new namespace parameters: "zoned.numzrwa" (number of
zrwa resources, i.e. number of zones that can have a zrwa),
"zoned.zrwas" (zrwa size in LBAs), "zoned.zrwafg" (granularity in LBAs
for flushes).
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add struct for Zone Management Send in preparation for more zone send
flags.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
These buffers can be anything, not an array of chars,
so use the 'void *' type for them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The 'buf' argument is not modified, so better pass it as const type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This fixes CVE-2021-3929 "locally" by denying DMA to the iomem of the
device itself. This still allows DMA to MMIO regions of other devices
(e.g. doing P2P DMA to the controller memory buffer of another NVMe
device).
Fixes: CVE-2021-3929
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The IPv6 option headers all have in common that they start with some
common fields, in particular the type of the next header followed by the
extention header length. This is used to traverse the list of the
options. The ESP header does not follow that format, which can break the
IPv6 option header traversal code in eth_parse_ipv6_hdr().
The effect of that is that network interfaces such as vmxnet3 that use
the following call chain
eth_is_ip6_extension_header_type
eth_parse_ipv6_hdr
net_tx_pkt_parse_headers
net_tx_pkt_parse
vmxnet3_process_tx_queue
to send packets from the VM out to the host will drop packets of the
following structure:
Ethernet-Header(IPv6-Header(ESP(encrypted data)))
Note that not all types of network interfaces use the net_tx_pkt_parse
function though, leading to inconsistent behavior regarding sending
those packets. The e1000 network interface for example does not suffer
from this limitation.
By not considering ESP to be an IPv6 header we can allow sending those
packets out to the host on all types of network interfaces.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/149
Buglink: https://bugs.launchpad.net/qemu/+bug/1758091
Signed-off-by: Thomas Jansen <mithi@mithi.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In section 7.4.3 of the 82574 datasheet it states that
"In systems that do not support MSI-X, reading the ICR
register clears it's bits..."
Some OSes rely on this.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch is to improve the logic of QEMU main thread sleep code in
qemu_chr_write_buffer() where it can be blocked and can't run other
coroutines during COLO IO stress test.
Our approach is to put filter_send() in a coroutine. In this way,
filter_send() will call qemu_coroutine_yield() in qemu_co_sleep_ns(),
so that it can be scheduled out and QEMU main thread has opportunity to
run other tasks.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make the comments consistent with the REGULAR_PACKET_CHECK_MS.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
COLO-compare use the glib function g_queue_find_custom to dump
another VM's networking packet to compare. But this function always
start find from the queue->head(here is the newest packet), It will
reduce the success rate of comparison. So this patch reversed
the order of the queues for performance.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reported-by: leirao <lei.rao@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Match the other error handling in this function.
Fixes: e7b347d0bf ("net: detect errors from probing vnet hdr flag for TAP devices")
Reviewed-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Foley <pefoley@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "Interrupt Cause" register (VMXNET3_REG_ICR) is read-only.
Write accesses are ignored. Log them with as LOG_GUEST_ERROR
instead of aborting:
[R +0.239743] writeq 0xe0002031 0x46291a5a55460800
ERROR:hw/net/vmxnet3.c:1819:vmxnet3_io_bar1_write: code should not be reached
Thread 1 "qemu-system-i38" received signal SIGABRT, Aborted.
(gdb) bt
#3 0x74c397d3 in __GI_abort () at abort.c:79
#4 0x76d3cd4c in g_assertion_message (domain=<optimized out>, file=<optimized out>, line=<optimized out>, func=<optimized out>, message=<optimized out>) at ../glib/gtestutils.c:3223
#5 0x76d9d45f in g_assertion_message_expr
(domain=0x0, file=0x59fc2e53 "hw/net/vmxnet3.c", line=1819, func=0x59fc11e0 <__func__.vmxnet3_io_bar1_write> "vmxnet3_io_bar1_write", expr=<optimized out>)
at ../glib/gtestutils.c:3249
#6 0x57e80a3a in vmxnet3_io_bar1_write (opaque=0x62814100, addr=56, val=70, size=4) at hw/net/vmxnet3.c:1819
#7 0x58c2d894 in memory_region_write_accessor (mr=0x62816b90, addr=56, value=0x7fff9450, size=4, shift=0, mask=4294967295, attrs=...) at softmmu/memory.c:492
#8 0x58c2d1d2 in access_with_adjusted_size (addr=56, value=0x7fff9450, size=1, access_size_min=4, access_size_max=4, access_fn=
0x58c2d290 <memory_region_write_accessor>, mr=0x62816b90, attrs=...) at softmmu/memory.c:554
#9 0x58c2bae7 in memory_region_dispatch_write (mr=0x62816b90, addr=56, data=70, op=MO_8, attrs=...) at softmmu/memory.c:1504
#10 0x58bfd034 in flatview_write_continue (fv=0x606000181700, addr=0xe0002038, attrs=..., ptr=0x7fffb9e0, len=1, addr1=56, l=1, mr=0x62816b90)
at softmmu/physmem.c:2782
#11 0x58beba00 in flatview_write (fv=0x606000181700, addr=0xe0002031, attrs=..., buf=0x7fffb9e0, len=8) at softmmu/physmem.c:2822
#12 0x58beb589 in address_space_write (as=0x608000015f20, addr=0xe0002031, attrs=..., buf=0x7fffb9e0, len=8) at softmmu/physmem.c:2914
Reported-by: Dike <dike199774@qq.com>
Reported-by: Duhao <504224090@qq.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2032932
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
v2: add my s-o-b marks to each commit
-----BEGIN PGP SIGNATURE-----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=+lgn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-nbd-2022-02-09-v2' into staging
nbd: handle AioContext change correctly
v2: add my s-o-b marks to each commit
# gpg: Signature made Fri 11 Feb 2022 13:14:55 GMT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-nbd-2022-02-09-v2:
iotests/281: Let NBD connection yield in iothread
block/nbd: Move s->ioc on AioContext change
iotests/281: Test lingering timers
iotests.py: Add QemuStorageDaemon class
block/nbd: Assert there are no timers when closed
block/nbd: Delete open timer when done
block/nbd: Delete reconnect delay timer when done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Other ISA devices such as serial-isa use the properties in their
build_aml functions. fdc-isa not using them is probably an oversight.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20220209191558.30393-1-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- include vhost tests in qtest
- clean-up gcov ephemera in clean/.gitignore
- lcitool and docker updates
- mention .editorconfig in devel notes
- switch Centos8 to Centos Stream 8
- remove TCG tracing support
- add coverage plugin using drcov format
- expand abilities of libinsn.so plugin
- use correct logging for i386 int cases
- move reset of plugin data to start of block
- deprecate ppc6432abi
- fix TARGET_ABI_FMT_ptr for softmmu builds
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmIDy/oACgkQ+9DbCVqe
KkTZwgf9HZxHqR12DYjcJtgka2AD8d4GzpkNdKJprN6HVaISmZMvkEwmL8qAaVuK
vXHM/ZdpMpm9vtGtPEI77nhE9414bVTiejpd/q0PeSBZTGT3QudN1C9qyjB3gJrQ
Y8dgIGvf+IJDfUin8YAgpuR8ccDwBEBkLIOXaHdQBrWYyj7j4JbyWuI9jUHUybUK
VPFnx97AqFRBrzWpzA2lhHTF/A6wxJsjaDt+JEXrjb9US8nKSzFEQY0L5AWlyAKs
yGVCoVr+eKxGqGXIjM18fEy2SYqwr8Nr4EWPIBuhZjFpd0BP+q5ANvmCGS8F9IUF
XJLmq2sYtZos8h5tjpxbmmnx7IZM/Q==
=mfAN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugins-090222-1' into staging
Testing and plugin updates:
- include vhost tests in qtest
- clean-up gcov ephemera in clean/.gitignore
- lcitool and docker updates
- mention .editorconfig in devel notes
- switch Centos8 to Centos Stream 8
- remove TCG tracing support
- add coverage plugin using drcov format
- expand abilities of libinsn.so plugin
- use correct logging for i386 int cases
- move reset of plugin data to start of block
- deprecate ppc6432abi
- fix TARGET_ABI_FMT_ptr for softmmu builds
# gpg: Signature made Wed 09 Feb 2022 14:13:14 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugins-090222-1: (28 commits)
include/exec: fix softmmu version of TARGET_ABI_FMT_lx
linux-user: Remove the deprecated ppc64abi32 target
plugins: move reset of plugin data to tb_start
target/i386: use CPU_LOG_INT for IRQ servicing
tests/plugins: add instruction matching to libinsn.so
tests/plugin: allow libinsn.so per-CPU counts
contrib/plugins: add a drcov plugin
plugins: add helper functions for coverage plugins
tracing: excise the tcg related from tracetool
tracing: remove the trace-tcg includes from the build
tracing: remove TCG memory access tracing
docs: remove references to TCG tracing
tests/tcg/sh4: disable another unreliable test
tests: Update CentOS 8 container to CentOS Stream 8
tests/lcitool: Allow lcitool-refresh in out-of-tree builds, too
gitlab: fall back to commit hash in qemu-setup filename
docs/devel: mention our .editorconfig
tests/lcitool: Install libibumad to cover RDMA on Debian based distros
tests: Manually remove libxml2 on MSYS2 runners
tests/lcitool: Refresh submodule and remove libxml2
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put an NBD block device into an I/O thread, and then read data from it,
hoping that the NBD connection will yield during that read. When it
does, the coroutine must be reentered in the block device's I/O thread,
which will only happen if the NBD block driver attaches the connection's
QIOChannel to the new AioContext. It did not do that after 4ddb5d2fde
("block/nbd: drop connection_co") and prior to "block/nbd: Move s->ioc
on AioContext change", which would cause an assertion failure.
To improve our chances of yielding, the NBD server is throttled to
reading 64 kB/s, and the NBD client reads 128 kB, so it should yield at
some point.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
s->ioc must always be attached to the NBD node's AioContext. If that
context changes, s->ioc must be attached to the new context.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2033626
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Prior to "block/nbd: Delete reconnect delay timer when done" and
"block/nbd: Delete open timer when done", both of those timers would
remain scheduled even after successfully (re-)connecting to the server,
and they would not even be deleted when the BDS is deleted.
This test constructs exactly this situation:
(1) Configure an @open-timeout, so the open timer is armed, and
(2) Configure a @reconnect-delay and trigger a reconnect situation
(which succeeds immediately), so the reconnect delay timer is armed.
Then we immediately delete the BDS, and sleep for longer than the
@open-timeout and @reconnect-delay. Prior to said patches, this caused
one (or both) of the timer CBs to access already-freed data.
Accessing freed data may or may not crash, so this test can produce
false successes, but I do not know how to show the problem in a better
or more reliable way. If you run this test on "block/nbd: Assert there
are no timers when closed" and without the fix patches mentioned above,
you should reliably see an assertion failure.
(But all other tests that use the reconnect delay timer (264 and 277)
will fail in that configuration, too; as will nbd-reconnect-on-open,
which uses the open timer.)
Remove this test from the quick group because of the two second sleep
this patch introduces.
(I decided to put this test case into 281, because the main bug this
series addresses is in the interaction of the NBD block driver and I/O
threads, which is precisely the scope of 281. The test case for that
other bug will also be put into the test class added here.
Also, excuse the test class's name, I couldn't come up with anything
better. The "yield" part will make sense two patches from now.)
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This is a rather simple class that allows creating a QSD instance
running in the background and stopping it when no longer needed.
The __del__ handler is a safety net for when something goes so wrong in
a test that e.g. the tearDown() method is not called (e.g. setUp()
launches the QSD, but then launching a VM fails). We do not want the
QSD to continue running after the test has failed, so __del__() will
take care to kill it.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Our two timers must not remain armed beyond nbd_clear_bdrvstate(), or
they will access freed data when they fire.
This patch is separate from the patches that actually fix the issue
(HEAD^^ and HEAD^) so that you can run the associated regression iotest
(281) on a configuration that reproducibly exposes the bug.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We start the open timer to cancel the connection attempt after a while.
Once nbd_do_establish_connection() has returned, the attempt is over,
and we no longer need the timer.
Delete it before returning from nbd_open(), so that it does not persist
for longer. It has no use after nbd_open(), and just like the reconnect
delay timer, it might well be dangerous if it were to fire afterwards.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We start the reconnect delay timer to cancel the reconnection attempt
after a while. Once nbd_co_do_establish_connection() has returned, this
attempt is over, and we no longer need the timer.
Delete it before returning from nbd_reconnect_attempt(), so that it does
not persist beyond the I/O request that was paused for reconnecting; we
do not want it to fire in a drained section, because all sort of things
can happen in such a section (e.g. the AioContext might be changed, and
we do not want the timer to fire in the wrong context; or the BDS might
even be deleted, and so the timer CB would access already-freed data).
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The 'throttle' block driver implements .bdrv_co_drain_end, so
blockdev-reopen will have to wait for it to complete in the polling
loop at the end of qmp_blockdev_reopen(). This makes AIO_WAIT_WHILE()
release the AioContext lock, which causes a crash if the lock hasn't
correctly been taken.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-3-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_subtree_drained_end() requires the caller to hold the AioContext
lock for the drained node. Not doing this for nodes outside of the main
AioContext leads to crashes when AIO_WAIT_WHILE() needs to wait and
tries to temporarily release the lock.
Fixes: 3908b7a899
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2046659
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-2-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
TARGET_ABI_FMT_lx isn't available for softmmu which causes confusion
when trying to print. As abi_ptr == target_ulong use its format string
instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
We can't always guarantee we get to the end of a translator loop.
Although this can happen for a variety of reasons it does happen more
often on x86 system emulation when an instruction spans across to an
un-faulted page. This caused confusion of the instruction tracking
data resulting in apparent reverse execution (at least from the
plugins point of view).
Fix this by moving the reset code to plugin_gen_tb_start so we always
start with a clean slate.
We unconditionally reset tcg_ctx->plugin_insn as the
plugin_insn_append code uses this as a proxy for knowing if plugins
are enabled for the current instruction. Otherwise we can hit a race
where a previously instrumented thread leaves a stale value after the
main thread exits and disables instrumentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/824
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-27-alex.bennee@linaro.org>
I think these have been wrong since f193c7979c (do not depend on
thunk.h - more log items). Fix them so as not to confuse other
debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-26-alex.bennee@linaro.org>
This adds simple instruction matching to the libinsn.so plugin which
is useful for examining the execution distance between instructions.
For example to track how often we flush in ARM due to TLB updates:
-plugin ./tests/plugin/libinsn.so,match=tlbi
which leads to output like this:
0xffffffc01019a918, 'tlbi vale1is, x1', 5702 hits, 31825 match hits, Δ+8112 since last match, 68859 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5703 hits, 56593 match hits, Δ+17712125 since last match, 33455 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5704 hits, 56594 match hits, Δ+12689 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5705 hits, 56595 match hits, Δ+12585 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5706 hits, 56596 match hits, Δ+10491 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5707 hits, 56597 match hits, Δ+4721 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5708 hits, 56598 match hits, Δ+10733 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5709 hits, 56599 match hits, Δ+61959 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5710 hits, 56600 match hits, Δ+55235 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5711 hits, 56601 match hits, Δ+54373 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5712 hits, 56602 match hits, Δ+2705 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5713 hits, 56603 match hits, Δ+17262 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5714 hits, 56604 match hits, Δ+17206 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5715 hits, 56605 match hits, Δ+28940 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5716 hits, 56606 match hits, Δ+7370 since last match, 33452 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5717 hits, 56607 match hits, Δ+7066 since last match, 33452 avg insns/match
showing we do some sort of TLBI invalidation every 33 thousand
instructions.
Cc: Vasilev Oleg <vasilev.oleg@huawei.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Emilio Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-25-alex.bennee@linaro.org>
We won't go fully flexible but for most system emulation 8 vCPUs
resolution should be enough for anybody ;-)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-24-alex.bennee@linaro.org>
This patch adds the ability to generate files in drcov format. Primary
goal this script is to have coverage logfiles thatwork in Lighthouse.
Signed-off-by: Ivanov Arkady <arkadiy.ivanov@ispras.ru>
Message-Id: <163491884553.304355.13246023070235438959.stgit@pc-System-Product-Name>
[AJB: use g_ptr_array instead of slist]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-23-alex.bennee@linaro.org>
Now we have no TCG trace events and no longer handle them in the code
we can remove the handling from the tracetool to generate them. vcpu
tracing is still available although the existing syscall event is an
exercise in redundancy (plugins and -strace can also get the
information).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-21-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-20-alex.bennee@linaro.org>
If you really want to trace all memory operations TCG plugins gives
you a more flexible interface for doing so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-19-alex.bennee@linaro.org>
Users wanting this sort of functionality should turn to TCG plugins
instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-18-alex.bennee@linaro.org>
