Currently, we try to remap all rings whenever we add a single new memory
region. That doesn't quite make sense, because we already map rings when
setting the ring address, and panic if that goes wrong. Likely, that
handling was simply copied from set_mem_table code, where we actually
have to remap all rings.
Remapping all rings might require us to walk quite a lot of memory
regions to perform the address translations. Ideally, we'd simply remove
that remapping.
However, let's be a bit careful. There might be some weird corner cases
where we might temporarily remove a single memory region (e.g., resize
it), that would have worked for now. Further, a ring might be located on
hotplugged memory, and as the VM reboots, we might unplug that memory, to
hotplug memory before resetting the ring addresses.
So let's unmap affected rings as we remove a memory region, and try
dynamically mapping the ring again when required.
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-14-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's factor it out to prepare for further changes.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-13-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the past, QEMU would create memory regions that could partially cover
hugetlb pages, making mmap() fail if we would use the mmap_offset as an
fd_offset. For that reason, we never used the mmap_offset as an offset into
the fd and instead always mapped the fd from the very start.
However, that can easily result in us mmap'ing a lot of unnecessary
parts of an fd, possibly repeatedly.
QEMU nowadays does not create memory regions that partially cover huge
pages -- it never really worked with postcopy. QEMU handles merging of
regions that partially cover huge pages (due to holes in boot memory) since
2018 in c1ece84e7c ("vhost: Huge page align and merge").
Let's be a bit careful and not unconditionally convert the
mmap_offset into an fd_offset. Instead, let's simply detect the hugetlb
size and pass as much as we can as fd_offset, making sure that we call
mmap() with a properly aligned offset.
With QEMU and a virtio-mem device that is fully plugged (50GiB using 50
memslots) the qemu-storage daemon process consumes in the VA space
1281GiB before this change and 58GiB after this change.
================ Vhost user message ================
Request: VHOST_USER_ADD_MEM_REG (37)
Flags: 0x9
Size: 40
Fds: 59
Adding region 4
guest_phys_addr: 0x0000000200000000
memory_size: 0x0000000040000000
userspace_addr: 0x00007fb73bffe000
old mmap_offset: 0x0000000080000000
fd_offset: 0x0000000080000000
new mmap_offset: 0x0000000000000000
mmap_addr: 0x00007f02f1bdc000
Successfully added new region
================ Vhost user message ================
Request: VHOST_USER_ADD_MEM_REG (37)
Flags: 0x9
Size: 40
Fds: 59
Adding region 5
guest_phys_addr: 0x0000000240000000
memory_size: 0x0000000040000000
userspace_addr: 0x00007fb77bffe000
old mmap_offset: 0x00000000c0000000
fd_offset: 0x00000000c0000000
new mmap_offset: 0x0000000000000000
mmap_addr: 0x00007f0284000000
Successfully added new region
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-12-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's speed up GPA to memory region / virtual address lookup. Store the
memory regions ordered by guest physical addresses, and use binary
search for address translation, as well as when adding/removing memory
regions.
Most importantly, this will speed up GPA->VA address translation when we
have many memslots.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-11-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory regions cannot overlap, and if we ever hit that case something
would be really flawed.
For example, when vhost code in QEMU decides to increase the size of memory
regions to cover full huge pages, it makes sure to never create overlaps,
and if there would be overlaps, it would bail out.
QEMU commits 48d7c97577 ("vhost: Merge sections added to temporary
list"), c1ece84e7c ("vhost: Huge page align and merge") and
e7b94a84b6 ("vhost: Allow adjoining regions") added and clarified that
handling and how overlaps are impossible.
Consequently, each GPA can belong to at most one memory region, and
everything else doesn't make sense. Let's factor out our search to prepare
for further changes.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-10-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We cannot have duplicate memory regions, something would be deeply
flawed elsewhere. Let's just stop the search once we found an entry.
We'll add more sanity checks when adding memory regions later.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-9-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
dev->nregions always covers only valid entries. Stop zeroing out other
array elements that are unused.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-8-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We never add a memory region if mmap() failed. Therefore, no need to check
for NULL.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-7-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's factor it out, reducing quite some code duplication and perparing
for further changes.
If we fail to mmap a region and panic, we now simply don't add that
(broken) region.
Note that we now increment dev->nregions as we are successfully
adding memory regions, and don't increment dev->nregions if anything went
wrong.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-6-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's reduce some code duplication and prepare for further changes.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's factor it out. Note that the check for MAP_FAILED was wrong as
we never set mmap_addr if mmap() failed. We'll remove the NULL check
separately.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-4-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's support up to 509 mem slots, just like vhost in the kernel usually
does and the rust vhost-user implementation recently [1] started doing.
This is required to properly support memory hotplug, either using
multiple DIMMs (ACPI supports up to 256) or using virtio-mem.
The 509 used to be the KVM limit, it supported 512, but 3 were
used for internal purposes. Currently, KVM supports more than 512, but
it usually doesn't make use of more than ~260 (i.e., 256 DIMMs + boot
memory), except when other memory devices like PCI devices with BARs are
used. So, 509 seems to work well for vhost in the kernel.
Details can be found in the QEMU change that made virtio-mem consume
up to 256 mem slots across all virtio-mem devices. [2]
509 mem slots implies 509 VMAs/mappings in the worst case (even though,
in practice with virtio-mem we won't be seeing more than ~260 in most
setups).
With max_map_count under Linux defaulting to 64k, 509 mem slots
still correspond to less than 1% of the maximum number of mappings.
There are plenty left for the application to consume.
[1] https://github.com/rust-vmm/vhost/pull/224
[2] https://lore.kernel.org/all/20230926185738.277351-1-david@redhat.com/
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's prepare for increasing VHOST_USER_MAX_RAM_SLOTS by dynamically
allocating dev->regions. We don't have any ABI guarantees (not
dynamically linked), so we can simply change the layout of VuDev.
Let's zero out the memory, just as we used to do.
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240214151701.29906-2-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no need to use the Linux-internal __u64 type, 1ULL is
guaranteed to be wide enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240117160313.175609-1-pbonzini@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The VHOST_USER_PROTOCOL_F_XEN_MMAP feature bit was defined in
f21e95ee97, which has been part of qemu's 8.1.0 release. However, it
seems it was never added to qemu's code, but it is well possible that it
is already used by different front-ends outside of qemu (i.e., Xen).
VHOST_USER_PROTOCOL_F_SHARED_OBJECT in contrast was added to qemu's code
in 1609476662, but never defined in the vhost-user specification. As a
consequence, both bits were defined to be 17, which cannot work.
Regardless of whether actual code or the specification should take
precedence, F_XEN_MMAP is already part of a qemu release, while
F_SHARED_OBJECT is not. Therefore, bump the latter to take number 18
instead of 17, and add this to the specification.
Take the opportunity to add at least a little note on the
VhostUserShared structure to the specification. This structure is
referenced by the new commands introduced in 1609476662, but was not
defined.
Fixes: 1609476662
("vhost-user: add shared_object msg")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016083201.23736-1-hreitz@redhat.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename shadowing variables to make this code compilable
with -Wshadow=local.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231006121129.487251-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to declare a new variable with the same name here,
we can simple re-use the one from the top of the function.
With this change, the file now compiles fine with -Wshadow=local.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231006120819.480792-1-thuth@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In the libvhost-user library we need to
handle VHOST_USER_GET_SHARED_OBJECT requests,
and add helper functions to allow sending messages
to interact with the virtio shared objects
hash table.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-5-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Explain Coverity that we are not going to overflow vmsg->fds.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230925194040.68592-5-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This avoids the warnings à la:
"warning: redirecting to https://gitlab.com/qemu-project/xyz.git/"
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows building libblkio at the same time as QEMU, if QEMU is
configured with --enable-blkio --enable-download.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the berkeley-testfloat-3 wrap to include a patch provided by
Olaf Hering. This fixes a problem with "control reaches end of non-void
function [-Werror=return-type]" compiler warning/errors that are now
enabled by default in certain versions of GCC.
Reported-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20230816091522.1292029-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Unlike other subprojects, these require an overlay directory to include
meson rules to build the libraries. The rules are basically lifted
from tests/fp/meson.build, with a few changes to create platform.h
and publish a dependency.
The build defines are passed through a subproject option, and posted
back to users of the library via the dependency's compile_args.
The only remaining user of GIT_SUBMODULES and GIT_SUBMODULES_ACTION
is roms/SLOF, which is used to build pc-bios/s390-ccw. All other
roms submodules are only present to satisfy the license on pre-built
firmware blobs.
Best reviewed with --color-moved.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to submodules, .wrap files have several advantages:
* option parsing and downloading is delegated to meson
* the commit is stored in a text file instead of a magic entry in the
git tree object
* we could stop shipping external dependencies that are only used as a
fallback, but not break compilation on platforms that lack them.
For example it may make sense to download dtc at build time, controlled
by --enable-download, even when building from a tarball. Right now,
this patch does the opposite: make-release treats dtc like libvfio-user
(which is not stable API and therefore hasn't found its way into any
distros) and keycodemap (which is a copylib, for better or worse).
dependency() can fall back to a wrap automatically. However, this
is only possible for libraries that come with a .pc file, and this
is not very common for libfdt even though the upstream project in
principle provides it; it also removes the control that we provide with
--enable-fdt={system,internal}. Therefore, the logic to pick system
vs. internal libfdt is left untouched.
--enable-fdt=git is removed; it was already a synonym for
--enable-fdt=internal.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The behavior of --{enable,disable}-pypi is similar to that of
-Dwrapmode={default,nodownload} respectively. In particular,
in both cases a feature needs to be explicitly enabled for the
dependency to be downloaded.
So, use a single option to control both cases. Now, --enable-slirp
will trigger cloning and building of libslirp if the .pc file
is not found on the machine.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent dtc/libfdt can use either Make or meson as the build system.
By using a subproject, our own meson.build can remove the hard
coded list of source files.
This is also the first step towards managing downloads with .wrap
files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is recommended to use SSIZE_T for ssize_t on win32, but the commit
that is being used for slirp.wrap uses int. Update to include the fix
as well as the other bugfix commit "ip: Enforce strict aliasing".
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The source file uses VIRTIO_F_VERSION_1 which is
not defined by <linux/virtio_config.h> on Debian 10.
The system-provided <linux/virtio_config.h> which
does not include the macro definition is included
through <linux/vhost.h>, so fix the issue by including
the standard-headers version before that.
Signed-off-by: David 'Digit' Turner <digit@google.com>
Message-Id: <20230405125920.2951721-2-digit@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
/E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
=e8DF
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
# DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
# /E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
# janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
# MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
# OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
# =e8DF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 04:03:12 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (31 commits)
hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV
hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()
docs/specs: Convert pci-testdev.txt to rst
docs/specs: Convert pci-serial.txt to rst
docs/specs/pci-ids: Convert from txt to rST
acpi: pcihp: allow repeating hot-unplug requests
virtio: i2c: Check notifier helpers for VIRTIO_CONFIG_IRQ_IDX
docs: Remove obsolete descriptions of SR-IOV support
intel_iommu: refine iotlb hash calculation
docs/cxl: Fix sentence
MAINTAINERS: Add Eugenio Pérez as vhost-shadow-virtqueue reviewer
tests: bios-tables-test: replace memset with initializer
hw/acpi: limit warning on acpi table size to pc machines older than version 2.3
Add my old and new work email mapping and use work email to support acpi
vhost-user-blk-server: notify client about disk resize
pci: avoid accessing slot_reserved_mask directly outside of pci.c
hw: Add compat machines for 8.1
hw/i386/amd_iommu: Factor amdvi_pci_realize out of amdvi_sysbus_realize
hw/i386/amd_iommu: Set PCI static/const fields via PCIDeviceClass
hw/i386/amd_iommu: Move capab_offset from AMDVIState to AMDVIPCIState
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently block_resize qmp command is simply ignored by vhost-user-blk
export. So, the block-node is successfully resized, but virtio config
is unchanged and guest doesn't see that disk is resized.
Let's handle the resize by modifying the config and notifying the guest
appropriately.
After this comment, lsblk in linux guest with attached
vhost-user-blk-pci device shows new size immediately after block_resize
QMP command on vhost-user exported block node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230321201323.3695923-1-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows to build with --enable-slirp / -D slirp=enabled, even when
libslirp is not installed on the system. "meson subprojects download"
will pull it from git in that case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230302131848.1527460-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Vhost-user specification changed feature and request
naming from _SLAVE_ to _BACKEND_.
This patch adopts the new naming convention.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230208203259.381326-3-maxime.coquelin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <08daa1896ad8824e17d57d6a970bc0b4bee73ece.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <737ebf2e697f8640558e6f73d96a692711f548f6.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since it was proposed to change the code in libvduse.c to use memcpy
instead of an assignment, the code in libvhost-user.c should also be
changed to use memcpy.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <502b22723264db064e4b05008233a9c1f2f8aaaa.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the assignment is causing a compiler warning, fix it by using
memcpy instead.
CC libvduse.o
libvduse.c: In function ‘vring_set_avail_event’:
libvduse.c:603:7: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasin]
603 | *((uint16_t *)&vq->vring.used->ring[vq->vring.num]) = htole16(val);
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Xie Yongji <xieyongji@bytedance.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4a0fe2a6436464473119fdbf0bc4076b36fbb37f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems there is no need to keep the inuse field signed and end up with
compiler warnings for sign-compare.
CC libvduse.o
libvduse.c: In function ‘vduse_queue_pop’:
libvduse.c:789:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
789 | if (vq->inuse >= vq->vring.num) {
| ^~
Instead of casting the comparison to unsigned int, just make the inuse
field unsigned int in the fist place.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <9fe3fd8b042e048bd04d506ca6e43d738b5c45b7.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the libvduse sources are used by another project, it can not be
guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.
CC libvduse.o
libvduse.c: In function ‘vduse_log_get’:
libvduse.c:172:9: error: implicit declaration of function ‘ftruncate’; did you mean ‘strncat’? [-Werror=implicit-function-declaration]
172 | if (ftruncate(fd, size) == -1) {
| ^~~~~~~~~
| strncat
The simplest way to allow external complication of libvduse.[ch] by
setting _GNU_SOURCE if it is not already set by the build system.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <407f3665f0605df936e5bfe60831d180edfb8cca.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assignment of dev->postcopy_ufd can be moved into an else clause and
then the code becomes C90 compliant.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_set_postcopy_advise’:
libvhost-user.c:1625:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
1625 | struct uffdio_api api_struct;
| ^~~~~~
Understandable, it might be desired to avoid else clauses, but in this
case it seems clear enough and frankly the dev->postcopy_ufd is only
assigned once.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <74db52afb1203c4580ffc7fa462b4b2ba260a353.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using libvhost-user source in an external project that wants to
comply with the C90 standard, it is best to declare variables before
code.
CC libvhost-user.o
libvhost-user.c: In function ‘generate_faults’:
libvhost-user.c:683:9: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
683 | struct uffdio_register reg_struct;
| ^~~~~~
In this case, it is also simple enough and doesn't cause any extra
ifdef additions.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <556c2d00c01fa134d13c0371d4014c90694c2943.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sign-compare warning also hits some of the for-loops, but it easy
fixed by just making the iterator variable unsigned int.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_gpa_to_va’:
libvhost-user.c:223:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
223 | for (i = 0; i < dev->nregions; i++) {
| ^
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <decb925e1a6fb9538738d2570bda2804f888fa15.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assert from recvmsg() return value against an uint32_t size field
from a protocol struct throws a compiler warning.
CC libvhost-user.o
In file included from libvhost-user.c:27:
libvhost-user.c: In function ‘vu_message_read_default’:
libvhost-user.c:363:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
363 | assert(rc == vmsg->size);
| ^~
This is not critical, but annoying when the libvhost-user source are
used in an external project that has this compiler warning switched on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <7a791e27b7bd3e0a8b8cc8fbb15090a870d226d5.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Strictly speaking only -std=gnu99 support the usage of typeof and for
easier inclusion in external projects, it is better to use __typeof__.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_log_queue_fill’:
libvhost-user.c:86:13: error: implicit declaration of function ‘typeof’ [-Werror=implicit-function-declaration]
86 | typeof(x) _min1 = (x); \
| ^~~~~~
Changing these two users of typeof makes the compiler happy and no extra
flags or pragmas need to be provided.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <981aa822bcaaa2b8d74f245339a99a85c25b346f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Then the libvhost-user sources are used by another project, it can not
be guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_panic’:
libvhost-user.c:195:9: error: implicit declaration of function ‘vasprintf’; did you mean ‘vsprintf’? [-Werror=implicit-function-declaration]
195 | if (vasprintf(&buf, msg, ap) < 0) {
| ^~~~~~~~~
| vsprintf
The simplest way to allow external complication of libvhost-user.[ch] is
by setting _GNU_SOURCE if it is not already set by the build system.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <be27dcc747a6b5cc6f8ae3f79e0b79171382bcef.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
