Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the last thing that mem.h does is include mem-internal.h,
the symbols are not actually private.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add helper function and call it for each trace event group added.
Makes sure that events added at module load time are initialized
properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-6-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass an iter to st_write_event_mapping, so the function can interate
different things depending on how we initialize the iter.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-5-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to interate over an event group.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-4-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename trace_event_iter_init() to trace_event_iter_init_pattern(),
add trace_event_iter_init_all() for interating over all events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-3-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because trace_opt_parse always deletes the options it has parsed,
trace_init_file's call to qemu_find_opts_singleton always
creates an empty -trace option group. Therefore, the subsequent
qemu_opt_get(opts, "file") always returns NULL.
To fix this, save the last "-trace file=..." option in a global
variable and use it later in trace_init_file.
This is similar to what was done before commit 92eecfff32 ("trace:
remove argument from trace_init_file", 2020-11-11), except contained
within trace/control.c and without memory leaks.
Fixes: 92eecfff32 ("trace: remove argument from trace_init_file", 2020-11-11)
Cc: stefanha@redhat.com
Reported-by: armbru@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210209145759.141231-2-pbonzini@redhat.com>
Re-generate tracetool output when the tracetool source code changes. Use
the same approach as qapi_gen_depends and introduce a tracetool_depends
files list so meson is aware of the dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210125110958.214017-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QEMU binaries no longer launch successfully with recent SystemTap
releases. This is because modular QEMU builds link the sdt semaphores
into the main binary instead of into the shared objects where they are
used. The symbol visibility of semaphores is 'hidden' and the dynamic
linker prints an error during module loading:
$ ./configure --enable-trace-backends=dtrace --enable-modules ...
...
Failed to open module: /builddir/build/BUILD/qemu-4.2.0/s390x-softmmu/../block-curl.so: undefined symbol: qemu_curl_close_semaphore
The long-term solution is to generate per-module dtrace .o files and
link them into the module instead of the main binary.
In the short term we can define STAP_SDT_V2 so dtrace(1) produces a .o
file with 'default' symbol visibility instead of 'hidden'. This
workaround is small and easier to merge for QEMU 5.2 and downstream
backports.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1898700
Cc: wcohen@redhat.com
Cc: fche@redhat.com
Cc: kraxel@redhat.com
Cc: rjones@redhat.com
Cc: ddepaula@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20201119141457.844452-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not needed, all the callers are just saving what was
retrieved from -trace and trace_init_file can retrieve it
on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201102115841.4017692-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracing can be enabled at the command line or via the
monitor. Command-line trace options are recorded during
trace_opt_parse(), but tracing is not enabled until the various
front-ends later call trace_init_file(). If the user passes a trace
option on the command-line, remember that and enable tracing during
trace_init_file(). Otherwise, trace_init_file() should record the
trace file specified by the frontend and avoid enabling traces
until the user requests them via the monitor.
This fixes 1b7157be3a and also
db25d56c01, by allowing the user
to enable traces on the command line and also avoiding
unwanted trace-<pid> files when the user has not asked for them.
Fixes: 1b7157be3a
Signed-off-by: Josh DuBois <josh@joshdubois.com>
Message-id: 20200816174610.20253-1-josh@joshdubois.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Build all executables by default except for the known-broken ones.
This also allows running qemu-iotests without manually building
socket_scm_helper.
Reported-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dtrace on macOS uses unresolved symbols with a special prefix to define
probes [1], only headers should be generated for USDT (dtrace(1)). But
it doesn't support backwards compatible no-op -G flag [2] and implicit
build rules fail.
1. https://markmail.org/message/6grq2ygr5nwdwsnb
2. https://markmail.org/message/5xrxt2w5m42nojkz
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The simple trace backend is enabled / disabled with a call
to st_set_trace_file_enabled(). When initializing tracing
from the command-line, this must be enabled on startup.
(Prior to db25d56c01, command-line initialization of
simple trace worked because every call to st_set_trace_file
enabled tracing.)
Fixes: db25d56c01
Signed-off-by: Josh DuBois <josh@joshdubois.com>
Message-id: 20200723053359.256928-1-josh@joshdubois.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
st_set_trace_file() accidentally enables tracing. It's called
unconditionally during startup, which is why QEMU built with the
simple trace backend always writes a trace file "trace-$PID".
This has been broken for quite a while. I didn't track down the exact
commit.
Fix st_set_trace_file() to restore the state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200527065613.25322-1-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise any -D settings the user may have made get ignored.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-10-alex.bennee@linaro.org>
NULL is a valid log filename used to indicate we want to use stderr
but qemu_set_log_filename (which is called by bsd-user/main.c) was not
handling it correctly.
That also made redundant a couple of NULL checks in calling code which
have been removed.
Signed-off-by: Salvador Fandino <salvador@qindel.com>
Message-Id: <20200123193626.19956-1-salvador@qindel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is easy for the atomic helpers to use trace_mem_build_info
directly, without resorting to symbol pasting. For this usage,
we cannot use trace_mem_get_info, because the MemOp does not
support 16-byte accesses.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already use g_pattern_match elsewhere so remove the duplication.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191205122518.10010-7-alex.bennee@linaro.org>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This will allow us to trace 32k-long memory accesses (although our
maximum is something like 256 bytes at the moment).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: expanded to 3->4 bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most tracing backends are implemented within QEMU, except the
DTrace/SystemTap backends.
One side effect is when running 'qemu -trace help', an incomplete
list of trace events is displayed when using the DTrace/SystemTap
backends.
This is partly due to trace events registered as modules with
trace_init(), and since the events are not used within QEMU,
the linker optimize and remove the unused modules (which is
OK in this particular case).
Currently only the events compiled in trace-root.o and in the
last trace.o member of libqemuutil.a are linked, resulting in
an incomplete list of events.
To avoid confusion, improve the help message, recommending to
use the proper systemtap script to display the events list.
Before:
$ lm32-softmmu/qemu-system-lm32 -trace help 2>&1 | wc -l
70
After:
$ lm32-softmmu/qemu-system-lm32 -trace help
Run 'qemu-trace-stap list qemu-system-lm32' to print a list
of names of trace points with the DTrace/SystemTap backends.
$ qemu-trace-stap list qemu-system-lm32 | wc -l
1136
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190823142203.5210-1-philmd@redhat.com
Message-Id: <20190823142203.5210-1-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
st_print_trace_file_status() takes an fprintf()-like callback and a
FILE * to pass to it.
Its only caller hmp_trace_file() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-3-armbru@redhat.com>
If the tracefs mountpoint has a very long path we may exceed PATH_MAX.
This is a system misconfiguration and the user must resolve it so that
applications can perform path-based system calls successfully.
This issue does not occur on real-world systems since tracefs is mounted
on /sys/kernel/debug/tracing/, but the compiler is smart enough to
foresee the possibility and warn about the unchecked snprintf(3) return
value. This patch fixes the compiler warning.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-2-stefanha@redhat.com
Message-Id: <20190321170831.6539-2-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is possible to specify the trace/ directory already in objs-y;
there is no need to have a separate unnest-vars invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This changes two lines in simple.c that end with a comma, and replaces them
with a semi-colon.
Signed-off-by: Larry Dewey <ldewey@suse.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20181127190849.10558-1-ldewey@suse.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The '-trace' and '--trace' spellings are only both supported in qemu
binary, while for qemu-nbd or qemu-img only '--trace' spelling is
supported. So for the consistency of trace option invocation, we
should use double-dash spelling in our documentation.
This's also mentioned in
https://wiki.qemu.org/BiteSizedTasks#Consistent_option_usage_in_documentation
.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1530674247-31200-1-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This updates the minimum required glib version to 2.40
-----BEGIN PGP SIGNATURE-----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=8tKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/min-glib-pull-request' into staging
glib: update the min required version
This updates the minimum required glib version to 2.40
# gpg: Signature made Fri 29 Jun 2018 12:24:58 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/min-glib-pull-request:
glib: enforce the minimum required version and warn about old APIs
glib: bump min required glib library version to 2.40
util: remove redundant include of glib.h and add osdep.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Place them in exec.c, exec-all.h and ram_addr.h. This removes
knowledge of translate-all.h (which is an internal header) from
several files outside accel/tcg and removes knowledge of
AddressSpace from translate-all.c (as it only operates on ram_addr_t).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will be used by the following commit.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-5-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow us to trace 16B-long memory accesses.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-4-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
