This is done to follow the recommendations given here: https://msdn.microsoft.com/en-us/library/aa368269%28VS.85%29.aspx
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For compatibility, all the letters in GUID should be capital.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*added semi-colon to better delineate 2.2 vs. 2.4 versioning
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to Microsoft disk location path can be obtained via
IOCTL_SCSI_GET_ADDRESS. Unfortunately this ioctl can not be used for all
devices. There are certain bus types which could be obtained with this
API. Please, refer to the following link for more details
https://technet.microsoft.com/en-us/library/ee851589(v=ws.10).aspx
Bus type could be obtained using IOCTL_STORAGE_QUERY_PROPERTY. Enum
STORAGE_BUS_TYPE describes all buses supported by OS.
Windows defines more bus types than Linux. Thus some values have been added
to GuestDiskBusType.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* fixed warning in CreateFile due to use of NULL instead of 0
* only provide disk info when CONFIG_QGA_NTDDSCSI=y
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We should use GetVolumeXXX api to work with volumes. This will help us to
resolve the situation with volumes without drive letter, i.e. when the
volume is mounted as a folder. Such volume is called mounted folder.
This volume is a regular mounted volume from all other points of view.
The information about non mounted volume is reported as System Reserved.
This volume is not mounted and thus it is not writable.
GuestDiskAddressList API is not used because operations are performed with
volumes but no with disks. This means that spanned disk will
be counted and handled as a single volume. It is worth mentioning
that the information about every disk in the volume can be queried
via IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We need qmp_quest_get_fsinfo togather with vss-provider, which works with
volumes. The call to this function is implemented via
FindFirst/NextVolumes. Moreover, volumes in Windows OS are filesystem unit,
so it will be more effective to work with them rather with devices.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's possible to set system time with dates after 2070, however, it's
not possible to set the RTC. It has limitation to up to year
2070 (1970+100). In order to keep both clock in sync and before the
kernel complains on invalid values, bail out early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By default, IPv4 prefixes will be derived by matching the address
to those returned by GetAdaptersInfo. IPv6 prefixes can not be
matched this way due to the unpredictable order of entries.
In Windows Vista/2008 guests and newer, both IPv4 and IPv6 prefixes
can be retrieved from OnLinkPrefixLength. Setting --extra-cflags
in the build configuration to "-D_WIN32_WINNT=0x600"
or greater makes OnLinkPrefixLength available. Setting --extra-cflags
is not required and if not set, the default approach to get the prefix
will be taken.
Signed-off-by: Kirk Allan <kallan@suse.com>
* drop ws2ipdef.h, it's missing on old mingw, and ws2tcpip.h already
includes it automatically on new builds
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_strcmp0() anymore.
This reverts commit 8f47747899.
Conflicts:
qemu-ga.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The current guest-fstrim support only returns an error if some
mountpoint was unable to be trimmed, skipping any possible additional
mountpoints. The result of the TRIM operation itself is also discarded.
This change returns a per mountpoint result of the TRIM operation. If an
error occurs on some mountpoints that error is returned and the
guest-fstrim continue with any additional mountpoints.
The returned values for errors, minimum and trimmed are dependant on the
filesystem, storage stacks and kernel version.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
* s/type/struct/ in schema type definitions
* moved version annotation for new guest-fstrim return field to
the field itself rather than applying to the entire command
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The FITRIM ioctl updates the fstrim_range structure it receives. This
way the caller can determine how many bytes were trimmed. The
guest-fstrim logic reuses the same fstrim_range for each filesystem,
effectively limiting each filesystem to trim at most as much as the
previous was able to trim.
If a previous filesystem would have trimmed 0 bytes, than the next
filesystem would report an error 'Invalid argument' because a FITRIM
request with length 0 is not valid.
This change resets the fstrim_range structure for each filesystem.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The script enables building Windows MSI installation package on Linux with wixl tool.
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-4-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Existing command line options include '-s install' and '-s uninstall'.
These options install/uninstall both Windows QEMU GA service
and optional VSS COM server. The QEMU GA Windows service allows
always-on serving guest agent's QMP commands and VSS COM server
enables guest agent integration with Volume Shadow Service.
This commit introdices new options '-s vss-install' and '-s vss-uninstall',
affecting only GA VSS COM server registration. The new options are useful
for registering and unregistering the COM server during MSI installation,
upgrade and uninstallation.
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-2-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Do the bulk of
the conversion to "struct" in qapi schema, with a fairly
mechanical:
for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done
followed by manually filtering out the places where we have a
'type' embedded in 'data'. Then tweak a couple of tests whose
output changes slightly due to longer lines.
I also verified that the generated files for QMP and QGA (such
as qmp-commands.h) are the same before and after, as assurance
that I didn't leave in any accidental member name changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For a few QMP commands, we are forced to pass an arbitrary type
without tracking it properly in QAPI. Among the existing clients,
this unnamed type was spelled 'dict', 'visitor', and '**'; this
patch standardizes on '**', matching the documentation changes
earlier in the series.
Meanwhile, for the 'gen' key, we have been ignoring the value,
although the schema consistently used "'no'" ('success-response'
was hard-coded to checking for 'no'). But now that we can support
a literal "false" in the schema, we might as well use that rather
than ignoring the value or special-casing a random string. Note
that these are one-way switches (use of 'gen':true is not the same
as omitting 'gen'). Also, the use of '**' requires 'gen':false,
but the use of 'gen':false does not mandate the use of '**'.
There is no difference to the generated code. Add some tests on
what we'd like to guarantee, although it will take later patches
to clean up test results and actually enforce the use of a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
configure script may add -fstack-protector-strong option instead
of -fstack-protector-all, depending on availability ( see
commit 63678e17c ). Both options have to by filtered out for
qga-vss.dll, otherwise MinGW cross-compilation fails at linking
stage.
Signed-off-by: Joseph Hindin <jhindin@daynix.com>
Message-Id: <1427906337-20805-2-git-send-email-jhindin@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's detected by coverity. Close the dirfd.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command is not implemented correctly yet. The documentation allows
to not pass any value to set, in which case the time is re-read from
RTC. However, reading CMOS on Windows is not trivial to implement. So
instead of pretending we've set the correct time, fail explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This conveys general information about guest memory blocks. Currently,
just the memory block size.
The size of a memory block is architecture dependent, it represents the logical
unit upon which memory online/offline operations are to be performed.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can change guest's online/offline state of memory blocks, by using
command 'guest-set-memory-blocks'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can get guest's memory block information by using command
"guest-get-memory-blocks", the returned value contains a list of memory block
info, such as phys-index, online state, can-offline info.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*replaced guest-triggerable assertion with an error msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The following commands are implemented:
- guest_file_open
- guest_file_close
- guest_file_write
- guest_file_read
- guest_file_seek
- guest_file_flush
Motivation is quite simple: Windows guests should be supported with the
same set of features as Linux one. Also this patch is a prerequisite for
Windows guest-exec command support.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Moved the code that sets non-blocking flag on fd into a separate function.
Signed-off-by: Simon Zolin <szolin@parallels.com>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Function send_response(s, &qdict->base) returns a negative number
when any failures occured. But strerror()'s parameter cannot be
negative. Let's change the testing condition and pass '-ret' to
strerr().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If readdir_r fails, error_setg_errno will reference the freed
pointer *dirpath*.
Moreover, readdir_r may cause a buffer overflow, using readdir instead.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Technically, fcntl(soc, F_SETFL, O_NONBLOCK)
is incorrect since it clobbers all other file flags.
We can use F_GETFL to get the current flags, set or
clear the O_NONBLOCK flag, then use F_SETFL to set the flags.
Using the qemu_set_nonblock() wrapper.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Wangxin <wangxinxin.wang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
acquire_privilege(), execute_async() and check_suspend_mode() do
nothing when called with an error set. Callers shouldn't do that, and
no caller does. Drop the superfluous tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. ga_get_fd_handle() and
guest_file_handle_add() don't return a useful value when they fail,
but that's just stupid. Fix that, and check them instead. As far
as I can tell, errp can't be null there, but this is more robust and
more obviously correct.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We mixed the use of "guest time", "system time", "hardware time",
"RTC" in documentation, it's unclear.
This patch just added two remarks of RTC and replace two "guest time"
by "guest's system time".
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In mingw64-headers-3.1.0, definition of _com_issue_error() is added, which
conflicts with definition in install.cpp. This adds version checking for
mingw headers to disable the definition when the headers>=3.1 is used.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This file does not depend on windows.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for isa-serial method for qemu-ga on Windows,
Added -p command line parameter for serial port name
specification, e.g. "-p COM15".
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
*added default isa-serial path to help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
