Handle output IO messages in the transmit (TX) virtqueue.
It allocates a VirtIOSoundPCMBuffer for each IO message and copies the
data buffer to it. When the IO buffer is written to the host's sound
card, the guest will be notified that it has been consumed.
The lifetime of an IO message is:
1. Guest sends IO message to TX virtqueue.
2. QEMU adds it to the appropriate stream's IO buffer queue.
3. Sometime later, the host audio backend calls the output callback,
virtio_snd_pcm_out_cb(), which is defined with an AUD_open_out()
call. The callback gets an available number of bytes the backend can
receive. Then it writes data from the IO buffer queue to the backend.
If at any time a buffer is exhausted, it is returned to the guest as
completed.
4. If the guest releases the stream, its buffer queue is flushed by
attempting to write any leftover data to the audio backend and
releasing all IO messages back to the guest. This is how according to
the spec the guest knows the release was successful.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b7c6fc458c763d09a4abbcb620ae9b220afa5b8f.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the PCM release control request, which is necessary for flushing
pending sound IO. No IO is handled yet so currently it only replies to
the request.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <ae0afa16461429df1a2f268313d5bfcca27479ec.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handles the PCM prepare control request. It initializes a PCM stream
when the guests asks for it.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <c6a9c437ef48e45f083fc957dcf7fe18a028e657.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the set parameters control request. It reconfigures a stream
based on a guest's preference if the values are valid and supported.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <d0d19928691f9375bfd83388806786cb7b161301.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the start and stop control messages for a stream_id. This request
does nothing at the moment except for replying to it. Audio playback
or capture will be started/stopped here in follow-up commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <9657dbfe3cb4a48ceb033ceb5977dc08669dfefd.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Respond to the VIRTIO_SND_R_PCM_INFO control request with the parameters
of each requested PCM stream.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5ecea6ba2fb0e3957d7d90bc4dbac521a3d1f678.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Receive guest requests in the control (CTRL) queue of the virtio sound
device and reply with a NOT SUPPORTED error to all control commands.
The receiving handler is virtio_snd_handle_ctrl(). It stores all control
messages in the queue in the device's command queue. Then it calls
virtio_snd_process_cmdq() to handle each message.
The handler is process_cmd() which replies with VIRTIO_SND_S_NOT_SUPP.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <3224aff87e7c4f2777bfe1bbbbca93b72525992c.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a PCI wrapper device for the virtio-sound device.
It is necessary to instantiate a virtio-snd device in a guest.
All sound logic will be added to the virtio-snd device in the following
commits.
To add this device with a guest, you'll need a >=5.13 kernel compiled
with CONFIG_SND_VIRTIO=y, which at the time of writing most distros have
off by default.
Use with following flags in the invocation:
Pulseaudio:
-audio driver=pa,model=virtio
or
-audio driver=pa,model=virtio,server=/run/user/1000/pulse/native
sdl:
-audio driver=sdl,model=virtio
coreaudio (macos/darwin):
-audio driver=coreaudio,model=virtio
etc.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b223598d59f56ead6a6d8d9bb6801e17489ddaa4.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new VIRTIO device for the virtio sound device id. Functionality
will be added in the following commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <f9678a41fe97b5886c1b04795f1be046509de866.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A virtio-fs device's VM state consists of:
- the virtio device (vring) state (VMSTATE_VIRTIO_DEVICE)
- the back-end's (virtiofsd's) internal state
We get/set the latter via the new vhost operations to transfer migratory
state. It is its own dedicated subsection, so that for external
migration, it can be disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-8-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_save_backend_state() and vhost_load_backend_state() can be used by
vhost front-ends to easily save and load the back-end's state to/from
the migration stream.
Because we do not know the full state size ahead of time,
vhost_save_backend_state() simply reads the data in 1 MB chunks, and
writes each chunk consecutively into the migration stream, prefixed by
its length. EOF is indicated by a 0-length chunk.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-7-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the interface for transferring the back-end's state during migration
as defined previously in vhost-user.rst.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-6-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For vhost-user devices, qemu can migrate the virtio state, but not the
back-end's internal state. To do so, we need to be able to transfer
this internal state between front-end (qemu) and back-end.
At this point, this new feature is added for the purpose of virtio-fs
migration. Because virtiofsd's internal state will not be too large, we
believe it is best to transfer it as a single binary blob after the
streaming phase.
These are the additions to the protocol:
- New vhost-user protocol feature VHOST_USER_PROTOCOL_F_DEVICE_STATE
- SET_DEVICE_STATE_FD function: Front-end and back-end negotiate a file
descriptor over which to transfer the state.
- CHECK_DEVICE_STATE: After the state has been transferred through the
file descriptor, the front-end invokes this function to verify
success. There is no in-band way (through the file descriptor) to
indicate failure, so we need to check explicitly.
Once the transfer FD has been established via SET_DEVICE_STATE_FD
(which includes establishing the direction of transfer and migration
phase), the sending side writes its data into it, and the reading side
reads it until it sees an EOF. Then, the front-end will check for
success via CHECK_DEVICE_STATE, which on the destination side includes
checking for integrity (i.e. errors during deserialization).
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-5-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vDPA, GET_VRING_BASE does not stop the queried vring, which is why
SUSPEND was introduced so that the returned index would be stable. In
vhost-user, it does stop the vring, so under the same reasoning, it can
get away without SUSPEND.
Still, we do want to clarify that if the device is completely stopped,
i.e. all vrings are stopped, the back-end should cease to modify any
state relating to the guest. Do this by calling it "suspended".
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-4-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the vhost-user documentation says that rings are to be
initialized in a disabled state when VHOST_USER_F_PROTOCOL_FEATURES is
negotiated. However, by the time of feature negotiation, all rings have
already been initialized, so it is not entirely clear what this means.
At least the vhost-user-backend Rust crate's implementation interpreted
it to mean that whenever this feature is negotiated, all rings are to
put into a disabled state, which means that every SET_FEATURES call
would disable all rings, effectively halting the device. This is
problematic because the VHOST_F_LOG_ALL feature is also set or cleared
this way, which happens during migration. Doing so should not halt the
device.
Other implementations have interpreted this to mean that the device is
to be initialized with all rings disabled, and a subsequent SET_FEATURES
call that does not set VHOST_USER_F_PROTOCOL_FEATURES will enable all of
them. Here, SET_FEATURES will never disable any ring.
This interpretation does not suffer the problem of unintentionally
halting the device whenever features are set or cleared, so it seems
better and more reasonable.
We can clarify this in the documentation by making it explicit that the
enabled/disabled state is tracked even while the vring is stopped.
Every vring is initialized in a disabled state, and SET_FEATURES without
VHOST_USER_F_PROTOCOL_FEATURES simply becomes one way to enable all
vrings.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-3-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GET_VRING_BASE does not mention that it stops the respective ring. Fix
that.
Furthermore, it is not fully clear what the "base offset" these
commands' documentation refers to is; an offset could be many things.
Be more precise and verbose about it, especially given that these
commands use different payload structures depending on whether the vring
is split or packed.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-2-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the end of the first if we see 'vc->gfx.surface = NULL;',
further checking of it is pointless. In the second if, ectx is taken.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Co-developed-by: Linux Verification Center <sdl.qemu@linuxtesting.org>
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Message-ID: <20231012104448.1251039-1-mironov@fintech.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Provides a display option, zoom-to-fit, that enables scaling of the
display when full-screen mode is enabled.
Also ensures that the corresponding menu item is marked as enabled when
the option is set to on.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231027154920.80626-2-carwynellis@gmail.com>
Scale factor needs to be applied when calculating width/height of the
GTK windows.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231012222643.13996-1-dongwon.kim@intel.com>
The first time gd_egl_scanout_texture() is called, there's a possibility
that the GTK drawing area might not be realized yet, in which case its
associated GdkWindow is NULL. This means gd_egl_init() was also skipped
and the EGLContext and EGLSurface stored in the VirtualGfxConsole are
not valid yet.
Continuing with the scanout in this conditions would result in hitting
an assert in libepoxy: "Couldn't find current GLX or EGL context".
A possible workaround is to just ignore the scanout request, giving the
the GTK drawing area some time to finish its realization. At that point,
the gd_egl_init() will succeed and the EGLContext and EGLSurface stored
in the VirtualGfxConsole will be valid.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231016123215.2699269-1-quic_acaggian@quicinc.com>
Fixes the GL context creation from a widget that isn't yet realized (in
a hidden tab for example).
Resolves:
https://gitlab.com/qemu-project/qemu/-/issues/1727
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Message-Id: <20231017111642.1155545-1-marcandre.lureau@redhat.com>
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
g3oVZA==
=dxC7
-----END PGP SIGNATURE-----
Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging
target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
-----BEGIN PGP SIGNATURE-----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=2A+W
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.2
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVJoOEACgkQr3yVEwxT
# gBPwcw/5AXgSVu521IHpobofq4Skc2rpO9P0Hep3IniBuS+5+h2XM3fwWNBaeeGj
# LZgdXDrCfcCnPuFh2I5j1D885xJDncDF4LET9EFtxK+BTT8eC5JpaCnORdV3Zd2T
# C7qdq1r4J/wKBel3cAz1jlLXc2Pssle4NFaMZGmOGlNX/mLJUYkI6BwKG9wNiCI+
# cCRQW5bEv9g8XzPYPsIKhX9aTegDKdV5x4Xj3YyVs8qkZTVM7Ona8GTpy6eShNfL
# h/RW+yvSxLwfKC9YJHesjI1oqhLsAuA7hFu5AVHiedFNAD5FevMZsZwrqjrmeBOG
# 5awBw9XgfXFFl7jQ0VQVRknt/PFANzTmGGbjLUkaXgJ6iTmH7oIMzwbkx2pM/0Qd
# HV2EboUPe5rJl0SNhcDMCJkYJYpt4z6TVXFpN5p10WU4K1AJXZf9P3YkChcxWiSK
# B4DlY4ax3W77voySwbKCvJRIRWCFQZmtl7doFY5dEQz2ERcNfI7VIB1GKIj7BlGm
# AVTCc5G9KghsaB8q0BzYbDplzCggdaaUBRgpIgLS/n22GKJlOisFwMCawWquPkEw
# i0t3ftt+Ket4Qnnq+dO4W3ehR4qW1/XatCWgQ3NCSgUeS4/9VK3h/nz5t+L7iKwp
# mjp86gNN11wcJRsBIIV7nOAmSAs9ybCm2F4J6YAyh3n1IlRVN0Q=
# =2A+W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 10:28:49 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu: (49 commits)
docs/about/deprecated: Document RISC-V "pmu-num" deprecation
target/riscv: Add "pmu-mask" property to replace "pmu-num"
target/riscv: Use existing PMU counter mask in FDT generation
target/riscv: Don't assume PMU counters are continuous
target/riscv: Propagate error from PMU setup
target/riscv: cpu: Set the OpenTitan priv to 1.12.0
hw/ssi: ibex_spi_host: Clear the interrupt even if disabled
disas/riscv: Replace TABs with space
disas/riscv: Add support for vector crypto extensions
disas/riscv: Add rv_codec_vror_vi for vror.vi
disas/riscv: Add rv_fmt_vd_vs2_uimm format
target/riscv: Move vector crypto extensions to riscv_cpu_extensions
target/riscv: Expose Zvks[c|g] extnesion properties
target/riscv: Add cfg properties for Zvks[c|g] extensions
target/riscv: Expose Zvkn[c|g] extnesion properties
target/riscv: Add cfg properties for Zvkn[c|g] extensions
target/riscv: Expose Zvkb extension property
target/riscv: Replace Zvbb checking by Zvkb
target/riscv: Add cfg property for Zvkb extension
target/riscv: Expose Zvkt extension property
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prevent that users try to boot a 64-bit only C3700 machine with a 32-bit
CPU, and to boot a 32-bit only B160L machine with a 64-bit CPU.
Signed-off-by: Helge Deller <deller@gmx.de>
The CPU HPA is in the high F-region on PA2.0 CPUs, so use F_EXTEND()
to trigger interrupt request at the right CPU HPA address.
Note that the cpu_hpa value comes out of the IRT, which doesn't store the
higher addresss bits.
Signed-off-by: Helge Deller <deller@gmx.de>
Fill in the insn_start value during form_gva, and copy
it out to the env field in hppa_restore_state_to_opc.
The value is not yet consumed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous decoding misnamed the bit it called "local".
Other than the name, the implementation was correct for pa1.x.
Rename this field to "tlbe".
PA2.0 adds (a real) local bit to PxTLB, and also adds a range
of pages to flush in GR[b].
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are aliased onto the normal integer loads to %g0.
Since we don't emulate caches, prefetch is a nop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hack the machine to use pa2.0 physical layout when required,
using the PSW.W=0 absolute to physical mapping.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's nothing about elf that specifically requires signed vs unsigned.
This is very much a target-specific preference.
In the meantime, casting low and high from uint64_t back to Elf_SWord
to uint64_t discards high bits that might have been set by translate_fn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the number of times we look for the constant 0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default PSW is set by the operating system with the PDC_PSW
firmware call. Use that setting to decide if wide mode is to be
enabled for interruptions and EIRR usage.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
