Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Message-id: 20131112185059.7262.33780.stgit@bling.home
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382435921-18438-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is
used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with
the APIC IDs that QEMU reserves for each package. This number must come
from "-smp" options rather than from the host CPUID.
It also turns out that this unsyncing makes Windows Server 2012R2 fail
to boot.
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1383603977-7003-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Cc: Richard Henderson <rth@twiddle.net>
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-3-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We didn't set default chr_name, the free is redundant.
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-2-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If period is assigned to 0, limit timer will expire immediately.
It causes a qemu warning:
"main-loop: WARNING: I/O thread spun for 1000 iterations"
This limit is meaningless. This patch forbids to assign 0 to period.
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385031203-23790-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131121133426.GA30827@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
g_array_get_element_size was only added in glib 2.14.
Fortunately we don't use it for any arrays where
element size is > 1, so just add an assert.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-2-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Kiszka (1) and others
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvm: Fix uninitialized cpuid_data
pci-assign: Remove dead code for direct I/O region access from userspace
KVM: x86: fix typo in KVM_GET_XCRS
Message-id: cover.1385040432.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Sebastian Macke
# Via Jia Liu
* jliu/or32:
target-openrisc: Correct carry flag check of l.addc and l.addic test cases
target-openrisc: Correct memory bounds checking for the tlb buffers
openrisc-timer: Reduce overhead, Separate clock update functions
target-openrisc: Correct wrong epcr register in interrupt handler
target-openrisc: Remove executable flag for every page
target-openrisc: Remove unnecessary code generated by jump instructions
target-openrisc: Speed up move instruction
Message-id: 1384958318-9145-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Wangting (Kathy)
# Via Juan Quintela
* quintela/migration.next:
The calculation of bytes_xfer in qemu_put_buffer() is wrong
Message-id: 1384946787-8190-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts commit cd5be5829c.
Digging into hardware specs shows this does not
actually make QEMU behave more like hardware:
There are valid arguments backed by the spec to indicate why the version
of e1000 prior to cd5be582 was more correct: the high byte actually
includes a valid bit, this is why all guests write it last.
For rtl8139 there's actually a separate undocumented valid bit, but we
don't implement it yet.
To summarize all the drivers we know about behave in one way
that allows us to make an assumption about write order and avoid
spurious, incorrect mac address updates to the monitor.
Let's stick to the tried heuristic for 1.7 and
possibly revisit for 1.8.
Reported-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_array_get_element_size was only added in glib 2.14,
there's no way to find element size in with an older glib.
Fortunately we only use a single table (linker) where element size > 1.
Switch element size to 1 everywhere, then we can just look at len field
to get table size in bytes.
Add an assert to make sure we catch any violations of this rule.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIBus registers a vmstate during init. Unregister it upon
removal/unplug.
Signed-off-by: Bandan Das <bsd@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test cases did not correctly test for the carry flag.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The mtspr and mfspr routines didn't check for the correct memory boundaries.
This fixes a segmentation fault while booting Linux.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The clock value is only evaluated when really necessary reducing
the overhead of the timer handling.
This also solves a problem in the way the Linux kernel
handles the timer and the expected accuracy.
The old version could lead to inaccurate timings.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
This patch corrects several misbehaviors during an interrupt process.
Most of the time the pc is already correct and therefore no special treatment
of the exceptions is necessary.
Tested by checking crashing programs which otherwise work in or1ksim.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
Pages should be flagged executable only if the tlb executable flag is
set or the mmu is off.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The sr_f variable is only used for the l.bf and l.bnf instructions.
For clarity the code is also rewritten using a switch statement instead
of if chaining.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
The OpenRISC architecture does not have its own move register
instruction. Instead it uses either "l.addi rd, r0, x" or
"l.ori rd, rs, 0" or "l.or rd, rx, r0"
The l.ori instruction is automatically optimized but not the l.addi instruction.
This patch optimizes for this special case.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
In qemu_put_buffer(), bytes_xfer += size is wrong, it will be more
than expected, and should be bytes_xfer += l.
Signed-off-by: zhangmin <zhangmin6@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
# By Peter Lieven
# Via Juan Quintela
* quintela/migration.next:
migration: drop MADVISE_DONT_NEED for incoming zero pages
Message-id: 1384878412-23521-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ia64-17:
tcg-ia64: Introduce tcg_opc_bswap64_i
tcg-ia64: Introduce tcg_opc_ext_i
tcg-ia64: Introduce tcg_opc_movi_a
tcg-ia64: Introduce tcg_opc_mov_a
tcg-ia64: Use A3 form of logical operations
tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
tcg-ia64: Use ADDS for small addition
tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
tcg-ia64: Move AREG0 to R32
tcg-ia64: Simplify brcond
tcg-ia64: Handle constant calls
tcg-ia64: Use shortcuts for nop insns
tcg-ia64: Use TCGMemOp within qemu_ldst routines
Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSif5+AAoJECgfDbjSjVRpHNAH/RQO8v2FYOQ7opGhOqzMwXwR
lbsaeaNtHUVV1MHeFtww04Oslp8tdsvcKq4ORGu38sG60dKHSZjdLnrsJCOKeEO/
3Luqx5kAJabSKDPHhYc+sZqQPx2aZT0s16bXuDyWXe+IEPpwO6e39VI7J+ulJjyI
VdDWqumusGtyqFoXri4SS5pcPVowfgKQFhJIkzXfcmzNAT0rXP87CYe1gl9W19rc
aD5VxHXdMvB7wfJAdtGzpc/MuEDG/MgCiUqgiLvC5zM0JUTmdPwgBGl56Er01BZ9
Rudeg8LXi/nhL1rZuQaNK1AnL/jg4mjKByLw5nQjjxPN9Hj0J6Zh4Asu5eYlS3w=
=c2GL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc last minute fixes for 1.8
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
doc: fix hardcoded helper path
pc: disable pci-info
Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=Dvpg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block fixes for 1.7.0
# gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Max Reitz (3) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
block: Fail if requested driver is not available
MAINTAINERS: add block driver sub-maintainers
qemu-img: Fix overwriting 'ret' before using
qemu-iotests: Test qcow2 count_contiguous_clusters()
qcow2: fix possible corruption when reading multiple clusters
qmp: access the local QemuOptsLists for drive option
MAINTAINERS: add block tree repo URLs
qemu-iotests: Extend 041 for unbacked mirroring
block/drive-mirror: Check for NULL backing_hd
qapi-schema: Update description for NewImageMode
block: Print its file name if backing file opening failed
Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Amos Kong (1) and Sebastian Huber (1)
# Via Stefan Hajnoczi
* stefanha/net:
virtio-net: fix the memory leak in rxfilter_notify()
smc91c111: Fix receive starvation
Message-id: 1384532032-19057-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=6SSx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream-1.7' into staging
Patch queue for ppc - 2013-11-08
These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.
# gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
# By Alexey Kardashevskiy
# Via Alexander Graf
* agraf/tags/signed-ppc-for-upstream-1.7:
pseries: Update SLOF firmware image
spapr: add vio-bus devices to categories
Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The madvise for zeroed out pages was introduced when every transferred
zero page was memset to zero and thus allocated. Since commit
211ea740 we check for zeroness of a target page before we memset
it to zero. Additionally we memmap target memory so it is essentially
zero initialized (except for e.g. option roms and bios which are loaded
into target memory although they shouldn't).
It was reported recently that this madvise causes a performance degradation
in some situations. As the madvise should only be called rarely and if it's called
it is likely on a busy page (it was non-zero and changed to zero during migration)
drop it completely.
Reported-By: Zhang Haoyu <haoyu.zhang@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Save the result of the call to object_get_canonical_path()
so we can free it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids each test needing to add it to suppress windows popping up.
[Commit 7ceeedd016 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd209803 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.
As a result, "make check" now tries to use graphics (GTK or SDL). Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.
This fixes "make check" in the QEMU buildbot.
-- Stefan]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
object_get_canonical_path() returns a gchar*, it should be freed by the
caller.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.
DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
