Replace
error_report("...: %s", ..., error_get_pretty(err));
by
error_reportf_err(err, "...: ", ...);
One of the replaced messages lacked a colon. Add it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505101908.6207-6-armbru@redhat.com>
Close inherited stderr of the parent if fork_process is false.
Otherwise no one will close it. (introduced by e6df58a5)
This only affected 'qemu-nbd -c /dev/nbd0'.
Signed-off-by: Raphael Pour <raphael.pour@hetzner.com>
Message-Id: <d8ddc993-9816-836e-a3de-c6edab9d9c49@hetzner.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
The option was deprecated in 4.0.0 (commit 0ae2d546); it's now been
long enough with no complaints to follow through with that process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200123164650.1741798-3-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu as server currently won't accept export names larger than 256
bytes, nor create dirty bitmap names longer than 1023 bytes, so most
uses of qemu as client or server have no reason to get anywhere near
the NBD spec maximum of a 4k limit per string.
However, we weren't actually enforcing things, ignoring when the
remote side violates the protocol on input, and also having several
code paths where we send oversize strings on output (for example,
qemu-nbd --description could easily send more than 4k). Tighten
things up as follows:
client:
- Perform bounds check on export name and dirty bitmap request prior
to handing it to server
- Validate that copied server replies are not too long (ignoring
NBD_INFO_* replies that are not copied is not too bad)
server:
- Perform bounds check on export name and description prior to
advertising it to client
- Reject client name or metadata query that is too long
- Adjust things to allow full 4k name limit rather than previous
256 byte limit
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-4-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Instead of parsing help options as normal object properties and
returning an error, provide the same help functionality as the system
emulator in qemu-nbd, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to
avoid wasting time on a preliminary write-zero request that will later
be rewritten by actual data, if it is known that the write-zero
request will use a slow fallback; but in doing so, could not optimize
for NBD. The NBD specification is now considering an extension that
will allow passing on those semantics; this patch updates the new
protocol bits and 'qemu-nbd --list' output to recognize the bit, as
well as the new errno value possible when using the new flag; while
upcoming patches will improve the client to use the feature when
present, and the server to advertise support for it.
The NBD spec recommends (but not requires) that ENOTSUP be avoided for
all but failures of a fast zero (the only time it is mandatory to
avoid an ENOTSUP failure is when fast zero is supported but not
requested during write zeroes; the questionable use is for ENOTSUP to
other actions like a normal write request). However, clients that get
an unexpected ENOTSUP will either already be treating it the same as
EINVAL, or may appreciate the extra bit of information. We were
equally loose for returning EOVERFLOW in more situations than
recommended by the spec, so if it turns out to be a problem in
practice, a later patch can tighten handling for both error codes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message, also handle EOPNOTSUPP]
When creating a read-only image, we are still advertising support for
TRIM and WRITE_ZEROES to the client, even though the client should not
be issuing those commands. But seeing this requires looking across
multiple functions:
All callers to nbd_export_new() passed a single flag based solely on
whether the export allows writes. Later, we then pass a constant set
of flags to nbd_negotiate_options() (namely, the set of flags which we
always support, at least for writable images), which is then further
dynamically modified with NBD_FLAG_SEND_DF based on client requests
for structured options. Finally, when processing NBD_OPT_EXPORT_NAME
or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the
runtime set of flags we've built up over several functions.
Let's refactor things to instead compute a baseline of flags as soon
as possible which gets shared between multiple clients, in
nbd_export_new(), and changing the signature for the callers to pass
in a simpler bool rather than having to figure out flags. We can then
get rid of the 'myflags' parameter to various functions, and instead
refer to client for everything we need (we still have to perform a
bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and
NBD_OPT_EXPORT_GO, but it's easier to see what is being computed).
This lets us quit advertising senseless flags for read-only images, as
well as making the next patch for exposing FAST_ZERO support easier to
write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: improve commit message, update iotest 223]
The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We kept old_stderr specifically so we could keep emitting error message
on stderr. However, qemu_daemon() closes stderr. Therefore, we need to
dup() stderr to old_stderr before invoking qemu_daemon().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-4-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
--fork is a bit boring if there is no way to get the child's PID. This
option helps.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190508211820.17851-2-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
The existing code to convert flag bits into strings looks a bit strange
now, and if we ever add more flags, it will look even stranger. Prevent
that from happening by making it look up the flag names in an array.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190405191635.25740-1-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently any client which can complete the TLS handshake is able to use
the NBD server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509 certificate.
This means the client will have to acquire a certificate from the CA
before they are permitted to use the NBD server. This is still a fairly
low bar to cross.
This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which
takes the ID of a previously added 'QAuthZ' object instance. This will
be used to validate the client's x509 distinguished name. Clients
failing the authorization check will not be permitted to use the NBD
server.
For example to setup authorization that only allows connection from a client
whose x509 certificate distinguished name is
CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB
escape the commas in the name and use:
qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
--object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB' \
--tls-creds tls0 \
--tls-authz authz0 \
....other qemu-nbd args...
NB: a real shell command line would not have leading whitespace after
the line continuation, it is just included here for clarity.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: split long line in --help text, tweak 233 to show that whitespace
after ,, in identity= portion is actually okay]
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing qemu-nbd --partition code claims to handle logical
partitions up to 8, since its introduction in 2008 (commit 7a5ca86).
However, the implementation is bogus (actual MBR logical partitions
form a sort of linked list, with one partition per extended table
entry, rather than four logical partitions in a single extended
table), making the code unlikely to work for anything beyond -P5 on
actual guest images. What's more, the code does not support GPT
partitions, which are becoming more popular, and maintaining device
subsetting in both NBD and the raw device is unnecessary duplication
of effort (even if it is not too difficult).
Note that obtaining the offsets of a partition (MBR or GPT) can be
learned by using 'qemu-nbd -c /dev/nbd0 file.qcow2 && sfdisk --dump
/dev/nbd0', but by the time you've done that, you might as well
just mount /dev/nbd0p1 that the kernel creates for you instead of
bothering with qemu exporting a subset. Or, keeping to just
user-space code, use nbdkit's partition filter, which has already
known both GPT and primary MBR partitions for a while, and was
just recently enhanced to support arbitrary logical MBR parititions.
Start the clock on the deprecation cycle, with examples of how
to accomplish device subsetting without using -P.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190125234837.2272-1-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
We want to be able to detect whether a given qemu NBD server is
exposing the right export(s) and dirty bitmaps, at least for
regression testing. We could use 'nbd-client -l' from the upstream
NBD project to list exports, but it's annoying to rely on
out-of-tree binaries; furthermore, nbd-client doesn't necessarily
know about all of the qemu NBD extensions. Thus, it is time to add
a new mode to qemu-nbd that merely sniffs all possible information
from the server during handshake phase, then disconnects and dumps
the information.
This patch actually implements --list/-L, while reusing other
options such as --tls-creds for now designating how to connect
as the client (rather than their non-list usage of how to operate
as the server).
I debated about adding this functionality to something akin to
'qemu-img info' - but that tool does not readily lend itself
to connecting to an arbitrary NBD server without also tying to
a specific export (I may, however, still add ImageInfoSpecificNBD
for reporting the bitmaps available when connecting to a single
export). And, while it may feel a bit odd that normally
qemu-nbd is a server but 'qemu-nbd -L' is a client, we are not
really making the qemu-nbd binary that much larger, because
'qemu-nbd -c' has to operate as both server and client
simultaneously across two threads when feeding the kernel module
for /dev/nbdN access.
Sample output:
$ qemu-nbd -L
exports available: 1
export: ''
size: 65536
flags: 0x4ed ( flush fua trim zeroes df cache )
min block: 512
opt block: 4096
max block: 33554432
available meta contexts: 1
base:allocation
Note that the output only lists sizes if the server sent
NBD_FLAG_HAS_FLAGS, because a newstyle server does not give
the size otherwise. It has the side effect that for really
old servers that did not send any flags, the size is not
output even though it was available. However, I'm not too
concerned about that - oldstyle servers are (rightfully)
getting less common to encounter (qemu 3.0 was the last
version where we even serve it), and most existing servers
that still even offer oldstyle negotiation (such as nbdkit)
still send flags (since that was added to the NBD protocol
in 2007 to permit read-only connections).
Not done here, but maybe worth future experiments: capture
the meat of NBDExportInfo into a QAPI struct, and use the
generated QAPI pretty-printers instead of hand-rolling our
output loop. It would also permit us to add a JSON output
mode for machine parsing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-20-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Refactor the 'name' parameter of nbd_receive_negotiate() from
being a separate parameter into being part of the in-out 'info'.
This also spills over to a simplification of nbd_opt_go().
The main driver for this refactoring is that an upcoming patch
would like to add support to qemu-nbd to list information about
all exports available on a server, where the name(s) will be
provided by the server instead of the client. But another benefit
is that we can now allow the client to explicitly specify the
empty export name "" even when connecting to an oldstyle server
(even if qemu is no longer such a server after commit 7f7dfe2a).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-10-eblake@redhat.com>
Our copy-and-pasted open-coding of strtol handling forgot to
handle overflow conditions. Use qemu_strto*() instead.
In the case of --partition, since we insist on a user-supplied
partition to be non-zero, we can use 0 rather than -1 for our
initial value to distinguish when a partition is not being
served, for slightly more optimal code.
The error messages for out-of-bounds values are less specific,
but should not be a terrible loss in quality.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-8-eblake@redhat.com>
Although our compile-time environment is set up so that we always
support long files with 64-bit off_t, we have no guarantee whether
off_t is the same type as int64_t. This requires casts when
printing values, and prevents us from directly using qemu_strtoi64()
(which will be done in the next patch). Let's just flip to uint64_t
where possible, and stick to int64_t for detecting failure of
blk_getlength(); we also keep the assertions added in the previous
patch that the resulting values fit in 63 bits. The overflow check
in nbd_co_receive_request() was already sane (request->from is
validated to fit in 63 bits, and request->len is 32 bits, so the
addition can't overflow 64 bits), but rewrite it in a form easier
to recognize as a typical overflow check.
Rename the variable 'description' to keep line lengths reasonable.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190117193658.16413-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When the user requests a partition, we were using data read
from the disk as disk offsets without a bounds check. We got
lucky that even when computed offsets are out-of-bounds,
blk_pread() will gracefully catch the error later (so I don't
think a malicious image can crash or exploit qemu-nbd, and am
not treating this as a security flaw), but it's better to
flag the problem up front than to risk permanent EIO death of
the block device down the road. The new bounds check adds
an assertion that will never fail, but rather exists to help
the compiler see that adding two positive 41-bit values
(given MBR constraints) can't overflow 64-bit off_t.
Using off_t to represent a partition length is a bit of a
misnomer; a later patch will update to saner types, but it
is left separate in case the bounds check needs to be
backported in isolation.
Also, note that the partition code blindly overwrites any
non-zero offset passed in by the user; so for now, make the
-o/-P combo an error for less confusion. In the future, we
may let -o and -P work together (selecting a subset of a
partition); so it is okay that an explicit '-o 0' behaves
no differently from omitting -o.
This can be tested with nbdkit:
$ echo hi > file
$ nbdkit -fv --filter=truncate partitioning file truncate=64k
Pre-patch:
$ qemu-nbd -p 10810 -P 1 -f raw nbd://localhost:10809 &
$ qemu-io -f raw nbd://localhost:10810
qemu-io> r -v 0 1
Disconnect client, due to: Failed to send reply: reading from file failed: Input/output error
Connection closed
read failed: Input/output error
qemu-io> q
[1]+ Done qemu-nbd -p 10810 -P 1 -f raw nbd://localhost:10809
Post-patch:
$ qemu-nbd -p 10810 -P 1 -f raw nbd://localhost:10809
qemu-nbd: Discovered partition 1 at offset 1048576 size 512, but size exceeds file length 65536
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-5-eblake@redhat.com>
Having to fire up qemu, then use QMP commands for nbd-server-start
and nbd-server-add, just to expose a persistent dirty bitmap, is
rather tedious. Make it possible to expose a dirty bitmap using
just qemu-nbd (of course, for now this only works when qemu-nbd is
visiting a BDS formatted as qcow2).
Of course, any good feature also needs unit testing, so expand
iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-9-eblake@redhat.com>
We only have one caller that wants to export a bitmap name,
which it does right after creation of the export. But there is
still a brief window of time where an NBD client could see the
export but not the dirty bitmap, which a robust client would
have to interpret as meaning the entire image should be treated
as dirty. Better is to eliminate the window entirely, by
inlining nbd_export_bitmap() into nbd_export_new(), and refusing
to create the bitmap in the first place if the requested bitmap
can't be located.
We also no longer need logic for setting a different bitmap
name compared to the bitmap being exported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-8-eblake@redhat.com>
The existing NBD code had a weird split where nbd_export_new()
created an export but did not add it to the list of exported
names until a later nbd_export_set_name() came along and grabbed
a second reference on the object; later, the first call to
nbd_export_close() drops the second reference while removing
the export from the list. This is in part because the QAPI
NbdServerRemoveNode enum documents the possibility of adding a
mode where we could do a soft disconnect: preventing new clients,
but waiting for existing clients to gracefully quit, based on
the mode used when calling nbd_export_close().
But in spite of all that, note that we never change the name of
an NBD export while it is exposed, which means it is easier to
just inline the process of setting the name as part of creating
the export.
Inline the contents of nbd_export_set_name() and
nbd_export_set_description() into the two points in an export
lifecycle where they matter, then adjust both callers to pass
the name up front. Note that for creation, all callers pass a
non-NULL name, (passing NULL at creation was for old style
servers, but we removed support for that in commit 7f7dfe2a),
so we can add an assert and do things unconditionally; but for
cleanup, because of the dual nature of nbd_export_close(), we
still have to be careful to avoid use-after-free. Along the
way, add a comment reminding ourselves of the potential of
adding a middle mode disconnect.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-5-eblake@redhat.com>
The use of a variable named 'exp' prevents includes to import <math.h>.
Rename it to avoid:
qemu-nbd.c:64:19: error: ‘exp’ redeclared as different kind of symbol
static NBDExport *exp;
^~~
In file included from /usr/include/features.h:428,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from /usr/lib/gcc/x86_64-redhat-linux/8/include/stdint.h:9,
from /source/qemu/include/qemu/osdep.h:80,
from /source/qemu/qemu-nbd.c:19:
/usr/include/bits/mathcalls.h:95:1: note: previous declaration of ‘exp’ was here
__MATHCALL_VEC (exp,, (_Mdouble_ __x));
^~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111163519.11457-1-philmd@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Connecting to a /dev/nbdN device is a Linux-specific action.
We were already masking -c and -d from 'qemu-nbd --help' on
non-linux. However, while -d fails with a sensible error
message, it took hunting through a couple of files to prove
that. What's more, the code for -c doesn't fail until after
it has created a pthread and tried to open a device - possibly
even printing an error message with %m on a non-Linux platform
in spite of the comment that %m is glibc-specific. Make the
failure happen sooner, then get rid of stubs that are no
longer needed because of the early exits.
While at it: tweak the blank newlines in --help output to be
consistent, whether or not built on Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181215135324.152629-7-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This changes output from:
$ qemu-nbd nosuch
Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
to something more consistent with qemu-img and qemu:
$ qemu-nbd nosuch
qemu-nbd: Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
Update the lone affected test to match. (Hmm - is it sad that we don't
do much testing of expected failures?)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181215135324.152629-2-eblake@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. user_creatable_add_opts_foreach() does that, and then
fails without setting an error. Its caller main(), via
qemu_opts_foreach(), is fine with it, but clean it up anyway.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-20-armbru@redhat.com>
Add a slight improvement of the Coccinelle semantic patch from commit
007b06578a, and use it to clean up. It leaves dead Error * variables
behind, cleaned up manually.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Eric Blake <eblake@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20181017082702.5581-3-armbru@redhat.com>
After the previous commit, nbd_client_new's first parameter is always
NULL. Let's drop it with all corresponding old-style negotiation code
path which is unreachable now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181003170228.95973-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: re-wrap short line]
Signed-off-by: Eric Blake <eblake@redhat.com>
Use new-style negotiation always, with default "" (empty) export name
if it is not specified with '-x' option.
qemu as client can manage either style since 2.6.0, commit 69b49502d8
For comparison:
nbd 3.10 dropped oldstyle long ago (Mar 2015):
https://github.com/NetworkBlockDevice/nbd/commit/36940193
nbdkit 1.3 switched its default to newstyle (Jan 2018):
https://github.com/libguestfs/nbdkit/commit/b2a8aecchttps://github.com/libguestfs/nbdkit/commit/8158e773
Furthermore, if a client that only speaks oldstyle still needs to
communicate to qemu, nbdkit remains available to perform the
translation between the two protocols.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181003170228.95973-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 145614a1 introduced --tls-creds and documented it in
qemu-nbd.texi, but forgot to document it in 'qemu-nbd --help'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181003180426.602765-1-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Now that we cancel all jobs and not only block jobs on shutdown, doing
that in bdrv_close_all() isn't really appropriate any more. Move the
job_cancel_sync_all() call to the callers, and only assert that there
are no job running in bdrv_close_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Instead of creating a QIOChannelSocket directly for the NBD
server socket, use a QIONetListener. This provides the ability
to listen on multiple sockets at the same time, so enables
full support for IPv4/IPv6 dual stack. This also means we can
honour multiple FDs received during socket activation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171218101643.20360-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
These days, many programs are including a bug-reporting address,
or better yet, a link to the project web site, at the tail of
their --help output. However, we were not very consistent at
doing so: only qemu-nbd and qemu-qa mentioned anything, with the
latter pointing to an individual person instead of the project.
Add a new #define that sets up a uniform string, mentioning both
bug reporting instructions and overall project details, and which
a downstream vendor could tweak if they want bugs to go to a
downstream database. Then use it in all of our binaries which
have --help output.
The canned text intentionally references http:// instead of https://
because our https website currently causes certificate errors in
some browsers. That can be tweaked later once we have resolved the
web site issued.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170803163353.19558-5-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HACKING recommends listing system includes right after osdep.h,
and before any other in-project headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170721135047.25005-3-eblake@redhat.com>
qemu-io and qemu-img already mirror the qemu version string,
time to make qemu-nbd do the same.
Reported-by: 陳培泓 <pahome.chen@mirlab.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170721135047.25005-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu proper has done so for 13 years
(8a7ddc38a6), qemu-img and qemu-io have
done so for four years (526eda14a6).
Ignoring this signal is especially important in qemu-nbd because
otherwise a client can easily take down the qemu-nbd server by dropping
the connection when the server wants to send something, for example:
$ qemu-nbd -x foo -f raw -t null-co:// &
[1] 12726
$ qemu-io -c quit nbd://localhost/bar
can't open device nbd://localhost/bar: No export with name 'bar' available
[1] + 12726 broken pipe qemu-nbd -x foo -f raw -t null-co://
In this case, the client sends an NBD_OPT_ABORT and closes the
connection (because it is not required to wait for a reply), but the
server replies with an NBD_REP_ACK (because it is required to reply).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20170611123714.31292-1-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Back in qemu 2.5, qemu-nbd was immune to port probes (a transient
server would not quit, regardless of how many probe connections
came and went, until a connection actually negotiated). But we
broke that in commit ee7d7aa when removing the return value to
nbd_client_new(), although that patch also introduced a bug causing
an assertion failure on a client that fails negotiation. We then
made it worse during refactoring in commit 1a6245a (a segfault
before we could even assert); the (masked) assertion was cleaned
up in d3780c2 (still in 2.6), and just recently we finally fixed
the segfault ("nbd: Fully intialize client in case of failed
negotiation"). But that still means that ever since we added
TLS support to qemu-nbd, we have been vulnerable to an ill-timed
port-scan being able to cause a denial of service by taking down
qemu-nbd before a real client has a chance to connect.
Since negotiation is now handled asynchronously via coroutines,
we no longer have a synchronous point of return by re-adding a
return value to nbd_client_new(). So this patch instead wires
things up to pass the negotiation status through the close_fn
callback function.
Simple test across two terminals:
$ qemu-nbd -f raw -p 30001 file
$ nmap 127.0.0.1 -p 30001 && \
qemu-io -c 'r 0 512' -f raw nbd://localhost:30001
Note that this patch does not change what constitutes successful
negotiation (thus, a client must enter transmission phase before
that client can be considered as a reason to terminate the server
when the connection ends). Perhaps we may want to tweak things
in a later patch to also treat a client that uses NBD_OPT_ABORT
as being a 'successful' negotiation (the client correctly talked
the NBD protocol, and informed us it was not going to use our
export after all), but that's a discussion for another day.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170608222617.20376-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a non-NBD client connects to qemu-nbd, we would end up with
a SIGSEGV in nbd_client_put() because we were trying to
unregister the client's association to the export, even though
we skipped inserting the client into that list. Easy trigger
in two terminals:
$ qemu-nbd -p 30001 --format=raw file
$ nmap 127.0.0.1 -p 30001
nmap claims that it thinks it connected to a pago-services1
server (which probably means nmap could be updated to learn the
NBD protocol and give a more accurate diagnosis of the open
port - but that's not our problem), then terminates immediately,
so our call to nbd_negotiate() fails. The fix is to reorder
nbd_co_client_start() to ensure that all initialization occurs
before we ever try talking to a client in nbd_negotiate(), so
that the teardown sequence on negotiation failure doesn't fault
while dereferencing a half-initialized object.
While debugging this, I also noticed that nbd_update_server_watch()
called by nbd_client_closed() was still adding a channel to accept
the next client, even when the state was no longer RUNNING. That
is fixed by making nbd_can_accept() pay attention to the current
state.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170527030421.28366-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Socket activation (sometimes known as systemd socket activation)
allows an Internet superserver to pass a pre-opened listening socket
to the process, instead of having qemu-nbd open a socket itself. This
is done via the LISTEN_FDS and LISTEN_PID environment variables, and a
standard file descriptor range.
This change partially implements socket activation for qemu-nbd. If
the environment variables are set correctly, then socket activation
will happen automatically, otherwise everything works as before. The
limitation is that LISTEN_FDS must be 1.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20170204100317.32425-2-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol allows servers to advertise a human-readable
description alongside an export name during NBD_OPT_LIST. Add
an option to pass through the user's string to the NBD client.
Doing this also makes it easier to test commit 200650d4, which
is the client counterpart of receiving the description.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the --fork option, one can make qemu-nbd fork the worker process.
The original process will exit on error of the worker or once the worker
enters the main loop.
Suggested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When --offset is set the apparent device size has to be adjusted
accordingly. Otherwise client may request read/write beyond the file end
which would fail.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Message-Id: <8a31654cb182932db78b95aae1e904fc2bd1c465.1475698895.git.tgolembi@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The builtin NBD server uses its own BlockBackend now instead of reusing
the monitor/guest device one.
This means that it has its own writethrough setting now. The builtin
NBD server always uses writeback caching now regardless of whether the
guest device has WCE enabled. qemu-nbd respects the cache mode given on
the command line.
We still need to keep a reference to the monitor BB because we put an
eject notifier on it, but we don't use it for any I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :) nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.
Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags). Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Please note, trace_init_backends() must be called in the final process,
i.e. after daemonization. This is necessary to keep tracing thread in
the proper process.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-6-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
* ld*_*_p(), if the data is at an address that might not be
correctly aligned for the load
* a local dereference and *_to_cpu(), if the pointer is
the correct type and known to be correctly aligned
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In addition to making the code simpler, this will replace the
long error messages:
cannot initialize crypto: Unable to initialize GNUTLS library: [...]
cannot initialize crypto: Unable to initialize gcrypt
with shorter messages:
Unable to initialize GNUTLS library: [...]
Unable to initialize gcrypt
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sector-based blk_read() should die; switch to byte-based
blk_pread() instead.
Add a constant for our magic number 512, to make it obvious
that this size will NOT change even if BDRV_SECTOR_SIZE does,
even though the two happen to be the same for now. Split
assignments from conditionals to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
From time to time qemu-nbd is crashing on the following assert:
assert(state == TERMINATING);
nbd_export_closed
nbd_export_put
main
and the state at the moment of the crash is evaluated to TERMINATE.
During shutdown process of the client the nbd_client_thread thread sends
SIGTERM signal and the main thread calls the nbd_client_closed callback.
If the SIGTERM callback will be executed after change the state to
TERMINATING, then the state will once again be TERMINATE.
To solve the issue, we must change the state to TERMINATE only if the state
is RUNNING. In the other case we are shutting down already.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1460629215-11567-1-git-send-email-den@openvz.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3d4b2f9c added -x to force qemu-nbd to use new-style
negotiation, but while it documented it in the man page, it
omitted docs in the --help output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459908128-11925-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An upcoming patch will alter how simple unions, like SocketAddress,
are laid out, which will impact all lines of the form 'addr->u.XXX'
(expanding it to the longer 'addr->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a SocketAddress. Also, take advantage of some C99 initialization where
it makes sense (simplifying g_new0() to g_new()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
When declaring the 'struct option' array, use the standard
constants no_argument/required_argument, instead of magic
values 0 and 1.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When defining values for long options, the normal practice is
to start numbering from 256, to avoid overlap with the range
of valid values for short options.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently qemu-nbd allows an image filename to be passed on the
command line, but unless using the JSON format, it does not have
a way to set any options except the format eg
qemu-nbd https://127.0.0.1/images/centos7.iso
qemu-nbd /home/berrange/demo.qcow2
This adds a --image-opts arg that indicates that the positional
filename should be interpreted as a full option string, not
just a filename.
qemu-nbd --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off
qemu-nbd --image-opts driver=file,filename=/home/berrange/demo.qcow2
This flag is mutually exclusive with the '-f' flag.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This modifies the qemu-nbd program so that it is possible to
request the use of TLS with the server. It simply adds a new
command line option --tls-creds which is used to provide the
ID of a QCryptoTLSCreds object previously created via the
--object command line option.
For example
qemu-nbd --object tls-creds-x509,id=tls0,endpoint=server,\
dir=/home/berrange/security/qemutls \
--tls-creds tls0 \
--exportname default
TLS requires the new style NBD protocol, so if no export name
is set (via --export-name), then we use the default NBD protocol
export name ""
TLS is only supported when using an IPv4/IPv6 socket listener.
It is not possible to use with UNIX sockets, which includes
when connecting the NBD server to a host device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-16-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This extends the NBD protocol handling code so that it is capable
of negotiating TLS support during the connection setup. This involves
requesting the STARTTLS protocol option before any other NBD options.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-nbd server currently always uses the old style protocol
since it never sets any export name. This is a problem because
future TLS support will require use of the new style protocol
negotiation.
This adds "--exportname NAME" / "-x NAME" arguments to qemu-nbd
which allow the user to set an explicit export name. When an
export name is set the server will always use the new style
NBD protocol.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-11-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers are converted to use I/O channels for
initial connection setup, it is possible to switch the core
NBD protocol handling core over to use QIOChannel APIs for
actual sockets I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This converts the qemu-nbd server to use the QIOChannelSocket
class for initial listener socket setup and accepting of client
connections. Actual I/O is still being performed against the
socket file descriptor using the POSIX socket APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow creation of user creatable object types with qemu-nbd
via a new --object command line arg. This will be used to supply
passwords and/or encryption keys to the various block driver
backends via the recently added 'secret' object type.
# printf letmein > mypasswd.txt
# qemu-nbd --object secret,id=sec0,file=mypasswd.txt \
...other nbd args...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Rename the parameter "close" to "close_fn" to disambiguous with
close(2).
This unifies error handling paths of NBDClient allocation:
nbd_client_new will shutdown the socket and call the "close_fn" callback
if negotiation failed, so the caller don't need a different path than
the normal close.
The returned pointer is never used, make it void in preparation for the
next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way. Commit 474c213 cleaned up some, but they keep coming
back. Offenders tracked down with the Coccinelle semantic patch from
commit 312fd5f.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_snapshot_load_tmp() sets an error and returns -errno on failure.
We report both even though the error message is self-contained. Drop
the redundant strerror().
While there: setting errno right before exit() is pointless, so drop
that, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-8-git-send-email-armbru@redhat.com>
Unlike ad hoc prints, error_report_err() uses the error whole instead
of just its message obtained with error_get_pretty(). This avoids
suppressing its hint (see commit 50b7b00). Example:
$ bld/ivshmem-server -l 42@
Parameter 'shm_size' expects a size
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
The last line is new with this patch.
While there, drop a "cannot parse shm size: " message prefix; it's
redundant, because the error message proper is always of the form
"Parameter 'shm_size' expects ...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-5-git-send-email-armbru@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
Coccinelle semantic patch
@@
expression E;
expression list ARGS;
@@
- errx(E, ARGS);
+ error_report(ARGS);
+ exit(E);
@@
expression E, FMT;
expression list ARGS;
@@
- err(E, FMT, ARGS);
+ error_report(FMT /*": %s"*/, ARGS, strerror(errno));
+ exit(E);
followed by a replace of '"/*": %s"*/' by ' : %s"', because I can't
figure out how to make Coccinelle transform strings.
A few of the error messages touched have trailing newlines. They'll
be stripped later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-2-git-send-email-armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
