This patch adds support for saving one VMStateDescription from other
VMStateDescription.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for saving arrays inside the struct
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for saving pointers to values
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces VMState infrastructure, to convert the save/load
functions of devices to a table approach. This new approach has the
following advantages:
- it is type-safe
- you can't have load/save functions out of sync
- will allows us to have new interesting commands, like dump <device>, that
shows all its internal state.
- Just now, the only added type is arrays, but we can add structures.
- Uses old load_state() function for loading old state.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now with isa-bus maintaining the isa irqs we can move the
isa_connect_irq() calls into isa_create_simple().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce isa_reserve_irq() which marks an irq reserved and returns
the appropriate qemu_irq entry from the i8259 table.
isa_reserve_irq() is a temporary interface to be used to allocate ISA
IRQs for devices which have not yet been converted to qdev, and for
special cases which are not suited for qdev conversions, such as the
'ferr'.
This patch goes on top of Gerd Hoffmann's which makes isa-bus.c own
the ISA irq table.
[ added isa-bus.o to some targets to fix build failures -- kraxel ]
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes:
(1) make isa-bus maintain isa irqs, complain when allocating
already taken irqs.
(2) note that (1) works only for isa devices converted to qdev
already (floppy and ps2/kbd/mouse right now), so more work
is needed to make this really useful.
(3) split floppy init into isa and sysbus versions.
(4) add sysbus->isa bridge & fix -M isapc breakage.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bug fix for segfault when run as i82551 HW:
Use Extended TBD only when HW supports it (i82558 and up).
Added assertions to guard from such buffer overflow
Introduce the MAX_TCB_BYTE_COUNT macro
Allocate buf big enough as HW needs (MAX_ETH_FRAME_SIZE -> MAX_TCB_BYTE_COUNT)
I don't feel 100% OK with the "s->device >= i82558B" condition
since it relies on the numeric (hex) value of those defines, which currently
is correct, but changes (which I don't forsee now) might break it.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Suppress the following compiler warning emitted by at least gcc version 4.2.1 (SUSE Linux)
and gcc version 3.4.5 (mingw32 special):
hw/pci-hotplug.c: In function 'pci_device_hot_add':
hw/pci-hotplug.c:102: warning: 'dinfo' may be used uninitialized in this function
hw/pci-hotplug.c:102: note: 'dinfo' was declared here
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Level 15 interrupts are broadcast to all CPUs, each CPU can clear the
interrupt using the local Clear Pending register.
Update intbit_to_level table.
Don't try to raise level 0 interrupts.
Calculate pending interrupts based on the separate inputs from master
register. Setting or resetting the pending level isn't correct because of
overlap of levels.
Level 14 is always used for CPU timer interrupts, remove the property.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ne2k is an ancient card that performs pretty terribly under QEMU. In many
modern OSes, there is no longer drivers available for the ne2k.
Switch the default network adapter to e1000. This card is more widely
suppported and performs rather well under QEMU. There may be very old OSes
that had a ne2k driver but not an e1000 driver but I think this is likely the
exception.
I think the average user is better served with an e1000 vs ne2k.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While reading Chris's code for fd migration I noticed the duplication
between QEMUFilePopen and QEMUFileStdio. This fixes it, and makes
qemu_fopen more similar qemu_popen.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of calling the IOAPIC from the PIC, raise IOAPIC irqs via the ISA bus.
As a side effect, IOAPIC lines 16-23 are enabled.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A PC has its motherboard IRQ lines connected to both the PIC and IOAPIC.
Currently, qemu routes IRQs to the PIC which then calls the IOAPIC, an
incestuous arrangement. In order to clean this up, create a new ISA IRQ
abstraction, and have devices raise ISA IRQs (which in turn raise the i8259
IRQs as usual).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi,
After discussing the issue with Avi, Gleb and a couple others on irq,
we came to the conclusion that it is preferred to have QEMU request
features from the BIOS, rather than notifying the BIOS that it is
running on QEMU or KVM. This way memory ranges can change etc. and
an older BIOS will continue to work on newer QEMU if it receives the
info as a fw_cfg value.
This one also matches what qemu-kvm does for irq0override, except I
haven't made it configurable. I leave that as an exercise for whoever
would be interested in switching off irq0override.
Thanks,
Jes
Set irq0 override in fw_cfg, informing the BIOS that QEMU expects
override on irq0. This matches qemu-kvm, and will help sharing a
single BIOS binary.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the lulz I implemented basic SMART functionality in ide.c. smartctl
on linux recognizes it just fine and starting self tests with it
complete successfully.
Signed-off-by: Brian Wheeler <bdwheele@indiana.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi all,
currently the vga screen_dump code doesn't use the DisplayState
interface properly and tries to replace it temporarily while taking the
screenshot.
A better approach is to register a DisplayChangeListener, call
vga_hw_update, and finally write the ppm in the next call from dpy_update.
Testing is appreciated.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-system-arm (0.10.5) segfaults when invoked with a PXA machine target,
e.g. -M tosa. The reason is fairly obvious:
Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com>
Hello,
for what I can tell, there is no way for vmware_vga to work correctly
right now. It assumes that the framebuffer bits-per-pixel and the one
from the DisplaySurface are identical (it uses directly the VRAM from
vga.c), but it always assumes 3 bytes per pixel, which is never possible
with the current version of DisplaySurface.
Attached patch fixes that by using ds_get_bits_per_pixel.
Searching for "inspiration" to convert another device to qdev, I got
ac97. Once I understood a bit of qdev, found that ac97 used a not needed
indirection. To protect the unaware, just fixed it.
Later, Juan.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Rely on the subpage system instead of the local version.
Make most functions "static".
Fix wrong parameter passed to ppc4xx_pob_reset.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit 93c8cfd9e6
Author: Gleb Natapov <gleb@redhat.com>
Date: Sun Aug 2 11:36:47 2009 +0300
make windows notice media change
Broke save/restore by loading a new field but not saving it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
