We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a tracepoint to trace the KVM_SET_USER_MEMORY_REGION ioctl
parameters which is quite useful for debugging VFIO memory regions
being actually registered with KVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20171215052326.21386-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
This reverts commit 4fe6d78b2e as it is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
If multiple guest threads in user-mode emulation write to a
page which QEMU has marked read-only because of cached TCG
translations, the threads can race in page_unprotect:
* threads A & B both try to do a write to a page with code in it at
the same time (ie which we've made non-writeable, so SEGV)
* they race into the signal handler with this faulting address
* thread A happens to get to page_unprotect() first and takes the
mmap lock, so thread B sits waiting for it to be done
* A then finds the page, marks it PAGE_WRITE and mprotect()s it writable
* A can then continue OK (returns from signal handler to retry the
memory access)
* ...but when B gets the mmap lock it finds that the page is already
PAGE_WRITE, and so it exits page_unprotect() via the "not due to
protected translation" code path, and wrongly delivers the signal
to the guest rather than just retrying the access
In particular, this meant that trying to run 'javac' in user-mode
emulation would fail with a spurious guest SIGSEGV.
Handle this by making page_unprotect() assume that a call for a page
which is already PAGE_WRITE is due to a race of this sort and return
a "fault handled" indication.
Since this would cause an infinite loop if we ever called
page_unprotect() for some other kind of fault than "write failed due
to bad access permissions", tighten the condition in
handle_cpu_signal() to check the signal number and si_code, and add a
comment so that if somebody does ever find themselves debugging an
infinite loop of faults they have some clue about why.
(The trick for identifying the correct setting for
current_tb_invalidated for thread B (needed to handle the precise-SMC
case) is due to Richard Henderson. Paolo Bonzini suggested just
relying on si_code rather than trying anything more complicated.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1511879725-9576-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently all the architecture/OS specific cpu_signal_handler()
functions call handle_cpu_signal() without passing it the
siginfo_t. We're going to want that so we can look at the si_code
to determine whether this is a SEGV_ACCERR access violation or
some other kind of fault, so change the functions to pass through
the pointer to the siginfo_t rather than just the si_addr value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1511879725-9576-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the EventNotifier's cleanup callback function to execute the
event_notifier_cleanup function after kvm unregistered the eventfd.
This change supports running the virtio_bus_set_host_notifier
function inside a memory region transaction. Otherwise, a closed
fd is sent to kvm, which results in a failure.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20171217055023.29225-1-pbonzini@redhat.com>
[rth: Also change the Chain logging in helper_lookup_tb_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This file begins tracking the files that will be the code base for HVF
support in QEMU. This code base is part of Google's QEMU version of
their Android emulator, and can be found at
https://android.googlesource.com/platform/external/qemu/+/emu-master-dev
This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted
Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is
appropriately licensed under GPL v2-or-later, except for the code inside
x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel),
is licensed GPL v2-only.
This code base already implements a very great deal of functionality,
although Google's version removed from Vertuu's the support for APIC
page and hyperv-related stuff. According to the Android Emulator Release
Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now
enabled by default on macOS for 32-bit x86 images to improve performance
and macOS compatibility", although we better use with caution for, as the
same Revision warns us, "If you experience issues with it specifically,
please file a bug report...". The code hasn't seen much update in the
last 5 months, so I think that we can further develop the code with
occasional visiting Google's repository to see if there has been any
update.
On top of Google's code, the following changes were made:
- add code to the configure script to support the --enable-hvf argument.
If the OS is Darwin, it checks for presence of HVF in the system. The
patch also adds strings related to HVF in the file qemu-options.hx.
QEMU will only support the modern syntax style '-M accel=hvf' no enable
hvf; the legacy '-enable-hvf' will not be supported.
- fix styling issues
- add glue code to cpus.c
- move HVFX86EmulatorState field to CPUX86State, changing the
the emulation functions to have a parameter with signature 'CPUX86State *'
instead of 'CPUState *' so we don't have to get the 'env'.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com>
Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The conditional memory barrier not only looks strange but actually is
wrong.
On s390x, I can reproduce interrupts via cpu_interrupt() not leading to
a proper kick out of emulation every now and then. cpu_interrupt() is
especially used for inter CPU communication via SIGP (esp. external
calls and emergency interrupts).
With this patch, I was not able to reproduce. (esp. no stalls or hangs
in the guest).
My setup is s390x MTTCG with 16 VCPUs on 8 CPU host, running make -j16.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171129191319.11483-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The cpu-exec-common.c file includes memory-internal.h, but it doesn't
actually use anything from that header. Remove the unnecessary include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 2726627197 started to use tb_unlock() and tlb_set_dirty() on
non TCG code. Add the functions as stubs, so that builds with TCG
disabled continue to compile.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To do a write to memory that is marked as notdirty, we need
to invalidate any TBs we have cached for that memory, and
update the cpu physical memory dirty flags for VGA and migration.
The slowpath code in notdirty_mem_write() does all this correctly,
but the new atomic handling code in atomic_mmu_lookup() doesn't
do anything at all, it just clears the dirty bit in the TLB.
The effect of this bug is that if the first write to a notdirty
page for which we have cached TBs is by a guest atomic access,
we fail to invalidate the TBs and subsequently will execute
incorrect code. This can be seen by trying to run 'javac' on AArch64.
Use the new notdirty_call_before() and notdirty_call_after()
functions to correctly handle the update to notdirty memory
in the atomic codepath.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1511201308-23580-3-git-send-email-peter.maydell@linaro.org
When we handle a signal from a fault within a user-only memory helper,
we cannot cpu_restore_state with the PC found within the signal frame.
Use a TLS variable, helper_retaddr, to record the unwind start point
to find the faulting guest insn.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch ensures that icount_decr.u32.high is clear before calling
cpu_exec_nocache when exception is pending. Because the exception is
caused by the first instruction in the block and it cannot be executed
without resetting the flag.
There are two parts in the fix. First, clear icount_decr.u32.high in
cpu_handle_interrupt (just before processing the "dependent" request,
stored in cpu->interrupt_request or cpu->exit_request) rather than
cpu_loop_exec_tb; this ensures that cpu_handle_exception is always
reached with zero icount_decr.u32.high unless another interrupt has
happened in the meanwhile.
Second, try to cause the exception at the beginning of
cpu_handle_exception, and exit immediately if the TB cannot
execute. With this change, interrupts are processed and
cpu_exec_nocache can make process.
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081818.27640.33165.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a condition before overwriting exception_index fiels.
It is needed when exception_index is already set to some meaningful value.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20171114081812.27640.26372.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are still seeing signals during translation time when we walk over
a page protection boundary. This expands the check to ensure the host
PC is inside the code generation buffer. The original suggestion was
to check versus tcg_ctx.code_gen_ptr but as we now segment the
translation buffer we have to settle for just a general check for
being inside.
I've also fixed up the declaration to make it clear it can deal with
invalid addresses. A later patch will fix up the call sites.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171108153245.20740-2-alex.bennee@linaro.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ac03ee5331 narrowed the scope of the exclusive
region so it only covers when we're executing the TB, not when
we're generating it. However it missed that there is more than
one execution path out of cpu_tb_exec -- if the atomic insn
causes an exception then the code will longjmp out, skipping
the code to end the exclusive region. This causes QEMU to hang
the next time the CPU calls start_exclusive(), waiting for
itself to exit the region.
Move the "end the region" code out to the end of the
function so that it is run for both normal exit and also
for exit-via-longjmp. We have to use a volatile bool flag
to decide whether we need to end the region, because we
can longjump out of the codegen as well as the execution.
(For some reason this only reproduces for me with a clang
optimized build, not a gcc debug build.)
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: ac03ee5331
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1509640536-32160-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Two or more threads might race while invalidating the same TB. We currently
do not check for this at all despite taking tb_lock, which means we would
wrongly invalidate the same TB more than once. This bug has actually been
hit by users: I recently saw a report on IRC, although I have yet to see
the corresponding test case.
Fix this by using qht_remove as the synchronization point; if it fails,
that means the TB has already been invalidated, and therefore there
is nothing left to do in tb_phys_invalidate.
Note that this solution works now that we still have tb_lock, and will
continue working once we remove tb_lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1508445114-4717-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.
In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.
Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.
TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.
Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.
Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:
Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
use_vis3_instructions
Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.
What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).
We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.
The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).
* -smp 1, 1 region (entire buffer):
qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367
That is, 8 flushes.
* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:
qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368
Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.
* -smp 8, static partitioning of 8 regions (10 MB per region):
qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364
That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The helpers require the address and size to be page-aligned, so
do that before calling them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
To avoid scalability issues when profiling info is enabled, this patch
makes the profiling info counters distributed via the following changes:
1) Consolidate profile info into its own struct, TCGProfile, which
TCGContext also includes. Note that tcg_table_op_count is brought
into TCGProfile after dropping the tcg_ prefix.
2) Iterate over the TCG contexts in the system to obtain the total counts.
This change also requires updating the accessors to TCGProfile fields to
use atomic_read/set whenever there may be conflicting accesses (as defined
in C11) to them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 6e3b2bfd6 ("tcg: allocate TB structs before the
corresponding translated code") we are not fully utilizing
code_gen_buffer for translated code, and therefore are
incorrectly reporting the amount of translated code as well as
the average host TB size. Address this by:
- Making the conscious choice of misreporting the total translated code;
doing otherwise would mislead users into thinking "-tb-size" is not
honoured.
- Expanding tb_tree_stats to accurately count the bytes of translated code on
the host, and using this for reporting the average tb host size,
as well as the expansion ratio.
In the future we might want to consider reporting the accurate numbers for
the total translated code, together with a "bookkeeping/overhead" field to
account for the TB structs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't really free anything in this function anymore; we just remove
the TB from the binary search tree.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a prerequisite for supporting multiple TCG contexts, since
we will have threads generating code in separate regions of
code_gen_buffer.
For this we need a new field (.size) in struct tb_tc to keep
track of the size of the translated code. This field uses a size_t
to avoid adding a hole to the struct, although really an unsigned
int would have been enough.
The comparison function we use is optimized for the common case:
insertions. Profiling shows that upon booting debian-arm, 98%
of comparisons are between existing tb's (i.e. a->size and b->size
are both !0), which happens during insertions (and removals, but
those are rare). The remaining cases are lookups. From reading the glib
sources we see that the first key is always the lookup key. However,
the code does not assume this to always be the case because this
behaviour is not guaranteed in the glib docs. However, we embed
this knowledge in the code as a branch hint for the compiler.
Note that tb_free does not free space in the code_gen_buffer anymore,
since we cannot easily know whether the tb is the last one inserted
in code_gen_buffer. The next patch in this series renames tb_free
to tb_remove to reflect this.
Performance-wise, lookups in tb_find_pc are the same as before:
O(log n). However, insertions are O(log n) instead of O(1), which
results in a small slowdown when booting debian-arm:
Performance counter stats for 'build/arm-softmmu/qemu-system-arm \
-machine type=virt -nographic -smp 1 -m 4096 \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-device,netdev=unet \
-drive file=img/arm/jessie-arm32.qcow2,id=myblock,index=0,if=none \
-device virtio-blk-device,drive=myblock \
-kernel img/arm/aarch32-current-linux-kernel-only.img \
-append console=ttyAMA0 root=/dev/vda1 \
-name arm,debug-threads=on -smp 1' (10 runs):
- Before:
8048.598422 task-clock (msec) # 0.931 CPUs utilized ( +- 0.28% )
16,974 context-switches # 0.002 M/sec ( +- 0.12% )
0 cpu-migrations # 0.000 K/sec
10,125 page-faults # 0.001 M/sec ( +- 1.23% )
35,144,901,879 cycles # 4.367 GHz ( +- 0.14% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,758,252,643 instructions # 1.87 insns per cycle ( +- 0.33% )
10,871,298,668 branches # 1350.707 M/sec ( +- 0.41% )
192,322,212 branch-misses # 1.77% of all branches ( +- 0.32% )
8.640869419 seconds time elapsed ( +- 0.57% )
- After:
8146.242027 task-clock (msec) # 0.923 CPUs utilized ( +- 1.23% )
17,016 context-switches # 0.002 M/sec ( +- 0.40% )
0 cpu-migrations # 0.000 K/sec
18,769 page-faults # 0.002 M/sec ( +- 0.45% )
35,660,956,120 cycles # 4.378 GHz ( +- 1.22% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,095,366,607 instructions # 1.83 insns per cycle ( +- 1.73% )
10,803,480,261 branches # 1326.192 M/sec ( +- 1.95% )
195,601,289 branch-misses # 1.81% of all branches ( +- 0.39% )
8.828660235 seconds time elapsed ( +- 0.38% )
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have curr_cflags, we can include CF_USE_ICOUNT
early and then remove it as necessary.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all code generation has been converted to check CF_PARALLEL, we can
generate !CF_PARALLEL code without having yet set !parallel_cpus --
and therefore without having to be in the exclusive region during
cpu_exec_step_atomic.
While at it, merge cpu_exec_step into cpu_exec_step_atomic.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
The tb->cflags field is not passed to tcg generation functions. So
we add a field to TCGContext, storing there a copy of tb->cflags.
Most architectures have <= 32 registers, which results in a 4-byte hole
in TCGContext. Use this hole for the new field.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert all existing readers of tb->cflags to tb_cflags, so that we
use atomic_read and therefore avoid undefined behaviour in C11.
Note that the remaining setters/getters of the field are protected
by tb_lock, and therefore do not need conversion.
Luckily all readers access the field via 'tb->cflags' (so no foo.cflags,
bar->cflags in the code base), which makes the conversion easily
scriptable:
FILES=$(git grep 'tb->cflags' target include/exec/gen-icount.h \
accel/tcg/translator.c | cut -f1 -d':' | sort | uniq)
perl -pi -e 's/([^.>])tb->cflags/$1tb_cflags(tb)/g' $FILES
perl -pi -e 's/([a-z->.]*)(->|\.)tb->cflags/tb_cflags($1$2tb)/g' $FILES
Then manually fixed the few errors that checkpatch reported.
Compile-tested for all targets.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were generating code during tb_invalidate_phys_page_range,
check_watchpoint, cpu_io_recompile, and (seemingly) discarding
the TB, assuming that it would magically be picked up during
the next iteration through the cpu_exec loop.
Instead, record the desired cflags in CPUState so that we request
the proper TB so that there is no more magic.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Background: s390x implements Low-Address Protection (LAP). If LAP is
enabled, writing to effective addresses (before any translation)
0-511 and 4096-4607 triggers a protection exception.
So we have subpage protection on the first two pages of every address
space (where the lowcore - the CPU private data resides).
By immediately invalidating the write entry but allowing the caller to
continue, we force every write access onto these first two pages into
the slow path. we will get a tlb fault with the specific accessed
addresses and can then evaluate if protection applies or not.
We have to make sure to ignore the invalid bit if tlb_fill() succeeds.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016202358.3633-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use ROUND_UP and simplify the code a bit.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-7-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attributes are not updated via region_add()/region_del(). Attribute changes
lead to a delete first, followed by a new add.
If this would ever not be the case, we would get an error when trying to
register the new slot.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-6-david@redhat.com>
Tested-by: Joe Clifford <joeclifford@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"overlapping" is a leftover, let's drop it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we want to trap every access to a section, we might not have a
slot. So let's just tolerate if we don't have one.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-4-david@redhat.com>
Tested-by: Joe Clifford <joeclifford@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the wrong calculation of the delta, used to align the ram address.
This only strikes if alignment has to be done.
Reported-by: Joe Clifford <joeclifford@gmail.com>
Fixes: 5ea69c2e36 ("kvm: factor out alignment of memory section")
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016144302.24284-3-david@redhat.com>
Tested-by: Joe Clifford <joeclifford@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the users of page_set_flags offset (page, page + len) as
the end points. One might consider this an error, since the other
users do supply an endpoint as the last byte of the region.
However, the first thing that page_set_flags does is round end UP
to the start of the next page. Which means computing page + len - 1
is in the end pointless. Therefore, accept this usage and do not
assert when given the exact size of the vm as the endpoint.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170708025030.15845-2-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In preparation for adding tc.size to be able to keep track of
TB's using the binary search tree implementation from glib.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This prevents bit rot by ensuring the debug code is compiled when
building a user-mode target.
Unfortunately the helpers are user-mode-only so we cannot fully
get rid of the ifdef checks. Add a comment to explain this.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of an ifdef check while ensuring that the debug code
is compiled, which prevents bit rot.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
And fix the following warning when DEBUG_TB_INVALIDATE is enabled
in translate-all.c:
CC mipsn32-linux-user/accel/tcg/translate-all.o
/data/src/qemu/accel/tcg/translate-all.c: In function ‘tb_alloc_page’:
/data/src/qemu/accel/tcg/translate-all.c:1201:16: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘tb_page_addr_t {aka unsigned int}’ [-Werror=format=]
printf("protecting code page: 0x" TARGET_FMT_lx "\n",
^
cc1: all warnings being treated as errors
/data/src/qemu/rules.mak:66: recipe for target 'accel/tcg/translate-all.o' failed
make[1]: *** [accel/tcg/translate-all.o] Error 1
Makefile:328: recipe for target 'subdir-mipsn32-linux-user' failed
make: *** [subdir-mipsn32-linux-user] Error 2
cota@flamenco:/data/src/qemu/build ((18f3fe1...) *$)$
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of some ifdef checks while ensuring that the debug code
is compiled, which prevents bit rot.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of a hole in struct TranslationBlock.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.
This change paves the way to having a common "tb_lookup" function.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reusing the have_tb_lock name, which is also defined in translate-all.c,
makes code reviewing unnecessarily harder.
Avoid potential confusion by renaming the local have_tb_lock variable
to something else.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is only used by this object, and it's not exported to any other.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Whenever there is an overflow in code_gen_buffer (e.g. we run out
of space in it and have to flush it), the code_time profiling counter
ends up with an invalid value (that is, code_time -= profile_getclock(),
without later on getting += profile_getclock() due to the goto).
Fix it by using the ti variable, so that we only update code_time
when there is no overflow. Note that in case there is an overflow
we fail to account for the elapsed coding time, but this is quite rare
so we can probably live with it.
"info jit" before/after, roughly at the same time during debian-arm bootup:
- before:
Statistics:
TB flush count 1
TB invalidate count 4665
TLB flush count 998
JIT cycles -615191529184601 (-256329.804 s at 2.4 GHz)
translated TBs 302310 (aborted=0 0.0%)
avg ops/TB 48.4 max=438
deleted ops/TB 8.54
avg temps/TB 32.31 max=38
avg host code/TB 361.5
avg search data/TB 24.5
cycles/op -42014693.0
cycles/in byte -121444900.2
cycles/out byte -5629031.1
cycles/search byte -83114481.0
gen_interm time -0.0%
gen_code time 100.0%
optim./code time -0.0%
liveness/code time -0.0%
cpu_restore count 6236
avg cycles 110.4
- after:
Statistics:
TB flush count 1
TB invalidate count 4665
TLB flush count 1010
JIT cycles 1996899624 (0.832 s at 2.4 GHz)
translated TBs 297961 (aborted=0 0.0%)
avg ops/TB 48.5 max=438
deleted ops/TB 8.56
avg temps/TB 32.31 max=38
avg host code/TB 361.8
avg search data/TB 24.5
cycles/op 138.2
cycles/in byte 398.4
cycles/out byte 18.5
cycles/search byte 273.1
gen_interm time 14.0%
gen_code time 86.0%
optim./code time 19.4%
liveness/code time 10.3%
cpu_restore count 6372
avg cycles 111.0
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit f0aff0f124 ("cputlb: add assert_cpu_is_self checks") buried
the increment of tlb_flush_count under TLB_DEBUG. This results in
"info jit" always (mis)reporting 0 TLB flushes when !TLB_DEBUG.
Besides, under MTTCG tlb_flush_count is updated by several threads,
so in order not to lose counts we'd either have to use atomic ops
or distribute the counter, which is more scalable.
This patch does the latter by embedding tlb_flush_count in CPUArchState.
The global count is then easily obtained by iterating over the CPU list.
Note that this change also requires updating the accessors to
tlb_flush_count to use atomic_read/set whenever there may be conflicting
accesses (as defined in C11) to it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On a modern server-class ppc host with the following CPU topology:
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0,8,16,24
Off-line CPU(s) list: 1-7,9-15,17-23,25-31
Thread(s) per core: 1
If both KVM PR and KVM HV loaded and we pass:
-machine pseries,accel=kvm,kvm-type=PR -smp 8
We expect QEMU to warn that this exceeds the number of online CPUs:
Warning: Number of SMP cpus requested (8) exceeds the recommended
cpus supported by KVM (4)
Warning: Number of hotpluggable cpus requested (8) exceeds the
recommended cpus supported by KVM (4)
but nothing is printed...
This happens because on ppc the KVM_CAP_NR_VCPUS capability is VM
specific ndreally depends on the KVM type, but we currently use it
as a global capability. And KVM returns a fallback value based on
KVM HV being present. Maybe KVM on POWER shouldn't presume anything
as long as it doesn't have a VM, but in all cases, we should call
KVM_CREATE_VM first and use KVM_CAP_NR_VCPUS as a VM capability.
This patch hence changes kvm_recommended_vcpus() accordingly and
moves the sanity checking of smp_cpus after the VM creation.
It is okay for the other archs that also implement KVM_CAP_NR_VCPUS,
ie, mips, s390, x86 and arm, because they don't depend on the VM
being created or not.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <150600966286.30533.10909862523552370889.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a server-class ppc host, this capability depends on the KVM type,
ie, HV or PR. If both KVM are present in the kernel, we will always
get the HV specific value, even if we explicitely requested PR on
the command line.
This can have an impact if we're using hugepages or a balloon device.
Since we've already created the VM at the time any user calls
kvm_has_sync_mmu(), switching to kvm_vm_check_extension() is
enough to fix any potential issue.
It is okay for the other archs that also implement KVM_CAP_SYNC_MMU,
ie, mips, s390, x86 and arm, because they don't depend on the VM being
created or not.
While here, let's cache the state of this extension in a bool variable,
since it has several users in the code, as suggested by Thomas Huth.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <150600965332.30533.14702405809647835716.stgit@bahia.lan>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mmio path (see exec.c:prepare_mmio_access) already protects itself
against recursive locking and it makes sense to do the same for
io_readx/writex. Otherwise any helper running in the BQL context will
assert when it attempts to write to device memory as in the case of
the bug report.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Richard Jones <rjones@redhat.com>
CC: Paolo Bonzini <bonzini@gnu.org>
CC: qemu-stable@nongnu.org
Message-Id: <20170921110625.9500-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pflash toggles mr->romd_mode. So this assert does not always hold.
1) a device was added with !mr->romd_mode, therefore effectively not
creating a kvm slot as we want to trap every access (add = false).
2) mr->romd_mode was toggled on before remove it. There is now
actually no slot to remove and the assert is wrong.
So let's just drop the assert.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920145025.19403-1-david@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flatview will make sure that we can only end up in this function with
memory sections that correspond to exactly one slot. So we don't
have to iterate multiple times. There won't be overlapping slots but
only matching slots.
Properly align the section and look up the corresponding slot. This
heavily simplifies this function.
We can now get rid of kvm_lookup_overlapping_slot().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170911174933.20789-7-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's properly align the sections first and bail out if we would ever
get called with a memory section we don't know yet.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170911174933.20789-6-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The way flatview handles memory sections, we will never have overlapping
memory sections in kvm.
address_space_update_topology_pass() will make sure that we will only
get called for
a) an existing memory section for which we only update parameters
(log_start, log_stop).
b) an existing memory section we want to delete (region_del)
c) a brand new memory section we want to add (region_add)
We cannot have overlapping memory sections in kvm as we will first remove
the overlapping sections and then add the ones without conflicts.
Therefore we can remove the complexity for handling prefix and suffix
slots.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170911174933.20789-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor it out, so we can reuse it later.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170911174933.20789-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We already require DESTROY_MEMORY_REGION_WORKS, JOIN_MEMORY_REGIONS_WORKS
was added just half a year later.
In addition, with flatview overlapping memory regions are first
removed before adding the changed one. So we can't really detect joining
memory regions this way.
Let's just get rid of this special handling.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170911174933.20789-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170912211934.20919-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20170911213328.9701-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The header is only used by accel/tcg/cputlb.c so we can
move it to the accel/tcg/ folder, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[PMD: reword commit title to match series]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A new shared header tcg-pool.inc.c adds new_pool_label,
for registering a tcg_target_ulong to be emitted after
the generated code, plus relocation data to install a
pointer to the data.
A new pointer is added to the TCGContext, so that we
dump the constant pool as data, not code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump
boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional
function tb_target_set_jmp_target.
While we're touching all backends, add a parameter for tb->tc_ptr;
we're going to need it shortly for some backends.
Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c.
This opens the possibility for TCG_TARGET_HAS_direct_jump to be
a runtime decision -- based on host cpu capabilities, the size of
code_gen_buffer, or a future debugging switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002073981.22386.9870422422367410100.stgit@frigg.lan>
[rth: Moved max_insns adjustment from tb_start to init_disas_context.
Removed pc_next return from translate_insn.
Removed tcg_check_temp_count from generic loop.
Moved gen_io_end to exactly match gen_io_start.
Use qemu_log instead of error_report for temporary leaks.
Moved TB size/icount assignments before disas_log.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Call the new cpu_transaction_failed() hook at the places where
CPU generated code interacts with the memory system:
io_readx()
io_writex()
get_page_addr_code()
Any access from C code (eg via cpu_physical_memory_rw(),
address_space_rw(), ld/st_*_phys()) will *not* trigger CPU exceptions
via cpu_transaction_failed(). Handling for transactions failures for
this kind of call should be done by using a function which returns a
MemTxResult and treating the failure case appropriately in the
calling code.
In an ideal world we would not generate CPU exceptions for
instruction fetch failures in get_page_addr_code() but instead wait
until the code translation process tried a load and it failed;
however that change would require too great a restructuring and
redesign to attempt at this point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The msi routing code in kvm calls some pci functions: provide
some stubs to enable builds without pci.
Also, to make this more obvious, guard them via a pci_available boolean
(which also can be reused in other places).
Fixes: e1d4fb2de ("kvm-irqchip: x86: add msi route notify fn")
Fixes: 767a554a0 ("kvm-all: Pass requester ID to MSI routing functions")
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Only emit "XXX accelerator not found", if there are not
further accelerators listed. eg
accel=kvm:tcg
doesn't print a "KVM accelerator not found" warning
when it falls back to tcg, but a
accel=kvm
prints a warning, since no fallback is given.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170717144527.24534-1-lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Every vCPU now uses a separate set of TBs for each set of dynamic
tracing event state values. Each set of TBs can be used by any number of
vCPUs to maximize TB reuse when vCPUs have the same tracing state.
This feature is later used by tracetool to optimize tracing of guest
code events.
The maximum number of TB sets is defined as 2^E, where E is the number
of events that have the 'vcpu' property (their state is stored in
CPUState->trace_dstate).
For this to work, a change on the dynamic tracing state of a vCPU will
force it to flush its virtual TB cache (which is only indexed by
address), and fall back to the physical TB cache (which now contains the
vCPU's dynamic tracing state as part of the hashing function).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This check is redundant because it is already performed by the only
caller of dump_exec_info -- the caller was updated by b7da97eef
("monitor: Check whether TCG is enabled before running the "info jit"
code").
Checking twice wouldn't necessarily be too bad, but here the check also
returns with tb_lock held. So we can either do the check before tb_lock is
acquired, or just get rid of it. Given that it is redundant, I am going
for the latter option.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running with KVM enabled, you can choose between emulating the
gic in kernel or user space. If the kernel supports in-kernel virtualization
of the interrupt controller, it will default to that. If not, if will
default to user space emulation.
Unfortunately when running in user mode gic emulation, we miss out on
interrupt events which are only available from kernel space, such as the timer.
This patch leverages the new kernel/user space pending line synchronization for
timer events. It does not handle PMU events yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1498577737-130264-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We use ADRP+ADD to compute the target address for goto_tb. This patch
introduces the NOP instruction which is used to align the above
instruction pair so that we can use one atomic instruction to patch
the destination offsets.
CC: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630143614.31059-2-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add the CONFIG_TCG for frontend and backend's files in the related
Makefiles.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If tcg is disabled, the functions in tcg-stub.c file will be called.
This file is target-independent file, do not include any platform
related stub functions into this file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the tcg_enabled() and make sure user build still enable tcg
even x86 softmmu disable tcg.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
translate-common.c will not be available anymore with --disable-tcg,
so we cannot leave cpu_interrupt_handler there.
Move the TCG-specific handler to accel/tcg/tcg-all.c, and adopt
KVM's handler as the default one, since it works just as well for
Xen and qtest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
translate-all.c will be disabled if tcg is disabled in the build,
so page_size_init() function and related variables will be moved
to exec.c file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 1f5c00cfdb ("qom/cpu: move tlb_flush to cpu_common_reset")
moved the call to tlb_flush() from the target-specific reset handlers
into the common code qom/cpu.c file, and protected the call with
"#ifdef CONFIG_SOFTMMU" to avoid that it is called for linux-user
only targets. But since qom/cpu.c is common code, CONFIG_SOFTMMU is
*never* defined here, so the tlb_flush() was simply never executed
anymore. Fix it by introducing a wrapper for tlb_flush() in a file
that is re-compiled for each target, i.e. in translate-all.c.
Fixes: 1f5c00cfdb
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch simply replaces the separate boolean field in CPUState that
kvm, hax (and upcoming hvf) have for keeping track of vcpu dirtiness
with a single shared field.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170618191101.3457-1-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some code paths can lead to atomic accesses racing with memset()
on cpu->tb_jmp_cache, which can result in torn reads/writes
and is undefined behaviour in C11.
These torn accesses are unlikely to show up as bugs, but from code
inspection they seem possible. For example, tb_phys_invalidate does:
/* remove the TB from the hash list */
h = tb_jmp_cache_hash_func(tb->pc);
CPU_FOREACH(cpu) {
if (atomic_read(&cpu->tb_jmp_cache[h]) == tb) {
atomic_set(&cpu->tb_jmp_cache[h], NULL);
}
}
Here atomic_set might race with a concurrent memset (such as the
ones scheduled via "unsafe" async work, e.g. tlb_flush_page) and
therefore we might end up with a torn pointer (or who knows what,
because we are under undefined behaviour).
This patch converts parallel accesses to cpu->tb_jmp_cache to use
atomic primitives, thereby bringing these accesses back to defined
behaviour. The price to pay is to potentially execute more instructions
when clearing cpu->tb_jmp_cache, but given how infrequently they happen
and the small size of the cache, the performance impact I have measured
is within noise range when booting debian-arm.
Note that under "safe async" work (e.g. do_tb_flush) we could use memset
because no other vcpus are running. However I'm keeping these accesses
atomic as well to keep things simple and to avoid confusing analysis
tools such as ThreadSanitizer.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1497486973-25845-1-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce this new field for the accelerator classes so that each
specific accelerator in the future can register its own global
properties to be used further by the system. It works just like how the
old machine compatible properties do, but only tailored for
accelerators.
Introduce register_compat_props_array() for it. Export it so that it may
be used in other codes as well in the future.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-3-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This introduces a special callback which allows to run code from some MMIO
devices.
SysBusDevice with a MemoryRegion which implements the request_ptr callback will
be notified when the guest try to execute code from their offset. Then it will
be able to eg: pre-load some code from an SPI device or ask a pointer from an
external simulator, etc..
When the pointer or the data in it are no longer valid the device has to
invalidate it.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
get_page_addr_code(..) does a cpu_ldub_code to fill the tlb:
This can lead to some side effects if a device is mapped at this address.
So this patch replaces the cpu_memory_ld by a tlb_fill.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This just moves the code before VICTIM_TLB_HIT macro definition
so we can use it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This replaces env1 and page_index variables by env and index
so we can use VICTIM_TLB_HIT macro later.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
move kvm related accelerator files into accel/ subdirectory, also
create one stub subdirectory, which will include accelerator's stub
files.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-5-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move tcg-runtime.c, translate-all.(ch) and translate-common.c into
accel/tcg/ subdirectory and updated related trace-events file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move cputlb.c, cpu-exec-common.c and cpu-exec.c related tcg exec
file into accel/tcg/ subdirectory.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-3-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
there are some types of accelerators in qemu, and all accelerators
have their own file except tcg. tcg accelerator is also defined in
accel.c file. tcg accelerator file will be splited from accel.c and
re-name to tcg-all.c. accel/ directory will be created to include
kvm and tcg related files.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-2-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
