Commit Graph

17836 Commits

Author SHA1 Message Date
Zhi Hui Li
c7ee8f683d net/socket.c : fix memory leak
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:41 +00:00
Peter Maydell
b48e361194 configure: Print a banner comment at the top of config.log
Print a banner comment at the top of config.log identifying
when configure was run and the arguments used. This is occasionally
useful for debugging purposes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:41 +00:00
Peter Maydell
fd786e1aee configure: Include #define name in check_define compiler error
Include the name of the #define being tested for in the compiler
error produced when a check_define test is run and fails. This
appears only in the config.log, but it does make it a little easier
to debug problems by inspecting config.log.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:40 +00:00
Markus Armbruster
0eba62e032 console: Fix qemu_default_pixelformat() for 24 bpp
Falls through to 32 bpp.  Harmless, because the only difference is the
alpha component, and we're not using that.  Spotted by Coverity.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:40 +00:00
Markus Armbruster
95d8f9f41c console: Fix console_putchar() for CSI J
It falls through to the code for CSI K.  "Erase Down" also does "Erase
End of Line", "Erase Up" also does "Erase Start of Line", and "Erase
Screen" also does "Erase Line".  Happens not to be visible.  Fix it
anyway.  Spotted by Coverity.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:40 +00:00
Markus Armbruster
f94a950f79 console: Clean up confusing indentation in console_putchar()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:40 +00:00
Peter Maydell
217bfb445b hw/arm_gic.c: Ignore attempts to complete nonexistent IRQs
Ignore attempts to complete non-existent IRQs; this fixes a buffer
overrun if the guest writes a bad value to the GICC_EOIR register.
(This case is UNPREDICTABLE so ignoring it is a valid choice.)
Note that doing nothing if the guest writes 1023 to this register
is not in fact a change in behaviour: the old code would also
always do nothing in this case but in a non-obvious way.
(The buffer overrun was noted by Coverity, see bug 887883.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:56 +01:00
Peter Maydell
21d89f841a configure: Drop armv4l/armv4b distinction in $cpu
Drop the distinction between armv4l/armv4b in the $cpu variable
(ie host cpu type) in favour of calling everything 'arm'. This
makes it the same as the ARCH setting and removes some special
casing. The only thing we were using the distinction for was to
decide which endianness to use in cross compilation; do a cpp
define check there instead.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:53 +01:00
David Gibson
81584fd50d pseries: Fix array overrun bug in PCI code
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7)
iterations.  However this overruns the 'bars' global array, which only has
6 elements. In fact we only want to run this loop for things listed in the
bars array, so this patch corrects the loop bounds to reflect that.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:50 +01:00
Peter Maydell
f4fc247b0d target-arm/helper.c: Don't allocate TCG resources unless TCG enabled
Don't call arm_translate_init() (which allocates TCG resources)
unless TCG is enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:47 +01:00
Peter Maydell
02afbf6475 target-arm/translate.c: Fix slightly misleading comment in Thumb decoder
Clarify some slightly misleading comments in the Thumb decoder's
handling of the memory hint space -- in particular one code path
marked as 'UNPREDICTABLE or unallocated hint' also includes some
legitimate preload instructions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:44 +01:00
Peter Chubb
4abc7ebf5f Fix hw_error messages from arm_timer.c
Two of the calls to hw_error() in arm_timer.c contain the wrong function name.

As suggested by Andreas Färber, use the C99 standard __func__ macro to
get the correct name, instead of putting the name directly into the code.

Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05 21:38:41 +01:00
Anthony Liguori
eb5d5beaeb Merge remote-tracking branch 'kwolf/for-anthony' into staging 2011-12-05 09:39:25 -06:00
Anthony Liguori
f6480ca3f3 Merge remote-tracking branch 'aneesh/1.0-fixes' into staging 2011-12-05 09:37:49 -06:00
Anthony Liguori
cac1e30af7 Merge remote-tracking branch 'stefanha/trivial-patches' into staging 2011-12-05 08:44:33 -06:00
Anthony Liguori
01e7a53aed Merge remote-tracking branch 'qemu-kvm/memory/batch' into staging 2011-12-05 08:43:38 -06:00
Anthony Liguori
4eb2d2d900 Update version for 1.1 development branch
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05 08:39:02 -06:00
Stefan Hajnoczi
922453bca6 block: convert qemu_aio_flush() calls to bdrv_drain_all()
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O.  Most of these places actually want to drain all block
requests but there is no block layer API to do so.

This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete.  As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:56:06 +01:00
Stefan Hajnoczi
5f8b6491f2 block: wait_for_overlapping_requests() deadlock detection
Debugging a reentrant request deadlock was fun but in the future we need
a quick and obvious way of detecting such bugs.  Add an assert that
checks we are not about to deadlock when waiting for another request.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:52:34 +01:00
Stefan Hajnoczi
bd9533e36e block: implement bdrv_co_is_allocated() boundary cases
Cases beyond the end of the disk image are only implemented for block
drivers that do not provide .bdrv_co_is_allocated().  It's worth making
these cases generic so that block drivers that do implement
.bdrv_co_is_allocated() also get them for free.

Suggested-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:39 +01:00
Kevin Wolf
c57c465800 dma-helpers: Add trace events
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
e94d138733 cow: use bdrv_co_is_allocated()
Now that bdrv_co_is_allocated() is available we can use it instead of
the synchronous bdrv_is_allocated() interface.  This is a follow-up that
Kevin Wolf <kwolf@redhat.com> pointed out after applying the series that
introduces bdrv_co_is_allocated().

It is safe to make cow_read() a coroutine_fn because its only caller is
a coroutine_fn.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
fb0490f69f block: add -drive copy-on-read=on|off
This patch adds the -drive copy-on-read=on|off command-line option:

  copy-on-read=on|off
  copy-on-read is "on" or "off" and enables whether to copy read backing
  file sectors into the image file.  Copy-on-read avoids accessing the
  same backing file sectors repeatedly and is useful when the backing
  file is over a slow network.  By default copy-on-read is off.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
ab1859218a block: core copy-on-read logic
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
d83947ac6d block: request overlap detection
Detect overlapping requests and remember to align to cluster boundaries
if the image format uses them.  This assumes that allocating I/O is
performed in cluster granularity - which is true for qcow2, qed, etc.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
f4658285f9 block: wait for overlapping requests
When copy-on-read is enabled it is necessary to wait for overlapping
requests before issuing new requests.  This prevents races between the
copy-on-read and a write request.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
53fec9d3fd block: add interface to toggle copy-on-read
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can
be used to programmatically enable or disable copy-on-read for a block
device.  Later patches add the actual copy-on-read logic.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
dbffbdcfff block: add request tracking
The block layer does not know about pending requests.  This information
is necessary for copy-on-read since overlapping requests must be
serialized to prevent races that corrupt the image.

The BlockDriverState gets a new tracked_request list field which
contains all pending requests.  Each request is a BdrvTrackedRequest
record with sector_num, nb_sectors, and is_write fields.

Note that request tracking is always enabled but hopefully this extra
work is so small that it doesn't justify adding an enable/disable flag.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
e8ee5e4c47 coroutine: add qemu_co_queue_restart_all()
It's common to wake up all waiting coroutines.  Introduce the
qemu_co_queue_restart_all() function to do this instead of looping over
qemu_co_queue_next() in every caller.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Stefan Hajnoczi
3951690a4a qemu-common: add QEMU_ALIGN_DOWN() and QEMU_ALIGN_UP() macros
Add macros for aligning a number to a multiple, for example:

QEMU_ALIGN_DOWN(500, 2000) = 0
QEMU_ALIGN_UP(500, 2000) = 2000

Since ALIGN_UP() is a common macro name use the QEMU_* namespace prefix.
Hopefully this will protect us from included headers that leak something
with a similar name.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
060f51c9de block: add bdrv_co_is_allocated() interface
This patch introduces the public bdrv_co_is_allocated() interface which
can be used to query image allocation status while the VM is running.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
6aebab140d block: drop .bdrv_is_allocated() interface
Now that all block drivers have been converted to
.bdrv_co_is_allocated() we can drop .bdrv_is_allocated().

Note that the public bdrv_is_allocated() interface is still available
but is in fact a synchronous wrapper around .bdrv_co_is_allocated().

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
81145834d3 cow: convert to .bdrv_co_is_allocated()
The cow block driver does not keep internal state for cluster lookups.
This means it is safe to perform cluster lookups in coroutine context
without risk of race conditions that corrupt internal state.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
e850b35a1f vdi: convert to .bdrv_co_is_allocated()
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vdi_is_allocated() does not
block.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
73f703ca8f vvfat: convert to .bdrv_co_is_allocated()
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vvfat_is_allocated() does not
block.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
f8a2e5e3ca block: convert qcow2, qcow2, and vmdk to .bdrv_co_is_allocated()
The qcow2, qcow, and vmdk block drivers are based on coroutines.  They have a
coroutine mutex which protects internal state.  We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
b7d5a5b8ae qed: convert to .bdrv_co_is_allocated()
The bdrv_qed_is_allocated() function is a synchronous wrapper around
qed_find_cluster(), which performs the cluster lookup.  In order to
convert the synchronous function to a coroutine function we yield
instead of using qemu_aio_wait().  Note that QED's cache is already safe
for parallel requests so no locking is needed.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Stefan Hajnoczi
376ae3f1cb block: add .bdrv_co_is_allocated()
This patch adds the .bdrv_co_is_allocated() interface which is identical
to .bdrv_is_allocated() but runs in coroutine context.  Running in
coroutine context implies that other coroutines might be performing I/O
at the same time.   Therefore it must be safe to run while the following
BlockDriver functions are in-flight:

    .bdrv_co_readv()
    .bdrv_co_writev()
    .bdrv_co_flush()
    .bdrv_co_is_allocated()

The new .bdrv_co_is_allocated() interface is useful because it can be
used when a VM is running, whereas .bdrv_is_allocated() is a synchronous
interface that does not cope with parallel requests.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:36 +01:00
Stefan Hajnoczi
05c4af54c6 block: use public bdrv_is_allocated() interface
There is no need for bdrv_commit() to use the BlockDriver
.bdrv_is_allocated() interface directly.  Converting to the public
interface gives us the freedom to drop .bdrv_is_allocated() entirely in
favor of a new .bdrv_co_is_allocated() in the future.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
e3f652b332 qcow2: Fix error path in qcow2_snapshot_load_tmp
If the bdrv_read() of the snapshot's L1 table fails, return the right
error code and make sure that the old L1 table is still loaded and we
don't break the BlockDriverState completely.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
9a4767809f qcow2: Fix order in qcow2_snapshot_delete
First the snapshot must be deleted and only then the refcounts can be
decreased.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
43a0cac465 qcow2: Fix order of refcount updates in qcow2_snapshot_goto
The refcount updates must be moved so that in the worst case we can get
cluster leaks, but refcounts may never be too low.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
589f284b76 qcow2: Return real error in qcow2_snapshot_goto
Besides fixing the return code, this adds some comments that make clear
how the code works and that it potentially breaks images if we fail in
the wrong place. Actually fixing this is left for the next patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
d1ea98d56d qcow2: Rework qcow2_snapshot_create error handling
Increase refcounts only after allocating a new L1 table has succeeded in
order to make leaks less likely. If writing the snapshot table fails,
revert in-memory state to be consistent with that on disk.

While at it, make it return the real error codes instead of -1.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
03343166f7 qcow2: Cleanups and memleak fix in qcow2_snapshot_create
sn->id_str could be leaked before this. The rest of this patch changes
comments, fixes coding style or removes checks that are unnecessary with
g_malloc.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
d69969c404 qcow2: Update snapshot table information at once
Failing in the middle wouldn't help with the integrity of the image, so
doing everything in a single request seems better.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:36 +01:00
Kevin Wolf
07fd877900 qcow2: Return real error code in qcow2_write_snapshots
Doesn't immediately fix anything as the callers don't use the return
value, but they will be fixed next.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:35 +01:00
Kevin Wolf
42deb29fed qcow2: Return real error code in qcow2_read_snapshots
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05 14:51:35 +01:00
Dong Xu Wang
a968168c58 block: Add coroutine_fn marker to coroutine functions
Looks better when reviewing these source files.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:35 +01:00
Zhi Yong Wu
727f005e6a hmp/qmp: add block_set_io_throttle
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:35 +01:00