Get rid of the unnecessary mutex, it was a vestige
of something else that was not done. That way we don't
have to free it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No hotplug support, make sure it doesn't happen.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
This patch adds a couple of variables to manipulate the raw sdr
entries. The const attribute is also removed on init_sdrs. This will
ease the introduction of a sdr loader using a file.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the code initializing the sdr table relies on an ending
record with a recid of 0xffff. This patch changes the loop to use the
sdr size as a breaking condition.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch moves the code section initializing the sdrs in its own
routine to prepare ground for changes in the subsequent patches.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be useful to define and use properties when the object is
instantiated.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The third byte in the response buffer of an IPMI command holds the
error code. In many IPMI command handlers, this byte is updated
directly. This patch adds a helper routine to clarify why this byte is
being used.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some IPMI command handlers in the BMC simulator use a macro
IPMI_CHECK_RESERVATION() to check a SDR reservation but the macro
implicitly uses local variables. This patch simply removes it.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IPMI command handlers in the BMC simulator use a macro
IPMI_ADD_RSP_DATA() to push bytes in a response buffer. The macro
hides the fact that it implicitly uses variables local to the handler,
which is misleading.
This patch introduces a simple 'struct RspBuffer' and inlined helper
routines to store byte(s) in a response buffer. rsp_buffer_push()
replaces the macro IPMI_ADD_RSP_DATA() and rsp_buffer_pushmore() is
new helper to push multiple bytes. The latest is used in the command
handlers get_msg() and get_sdr() which are manipulating the buffer
directly.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most IPMI command handlers in the BMC simulator start with a call to
the macro IPMI_CHECK_CMD_LEN() which verifies that a minimal number of
arguments expected by the command are indeed available. To achieve
this task, the macro implicitly uses local variables which is
misleading in the code.
This patch adds a 'cmd_len_min' attribute to the struct IPMICmdHandler
defining the minimal number of arguments expected by the command and
moves this check in the global command handler ipmi_sim_handle_command().
To clarify the checks being done on the received command, the patch
introduces a helper ipmi_get_handler().
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a number of off-by-ones, one of them spotted by Coverity.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was falling through when it should have been a break. Found by
Coverity. The logic could be simplified a bit with a fallthrough,
probably the original thought, but that would be less clear, I think.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Found by Paolo.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-2-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>From the specs (20.8 Get Device GUID Command), the command needs to
return a GUID (Globally Unique ID), or UUID, that should never change
over the lifetime of the device. qemu_uuid looked like a good
candidate to start with but we could use a specific BMC property also
if needed.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a simulator. Just return an unknown cause (0).
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, sdr attributes are identified using byte offsets and this
can be a bit confusing.
This patch adds a struct ipmi_sdr_compact conforming to the IPMI specs
and replaces byte offsets with names. It also introduces and uses a
struct ipmi_sdr_header in sections of the code where no assumption is
made on the type of SDR. This leave rooms to potential usage of other
types in the future.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IPMI BMC simulator populates the SDR table with a set of initial
SDRs. The length of each SDR is taken from the record itself (byte 4)
which does not include the size of the header. But, the full length
(header + data) is required by the sdr_add_entry() routine.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ARRAY_SIZE() is simple to use and removes the need to pre-define
the size of the command arrays.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Each routine using the IPMI_ADD_RSP_DATA, IPMI_CHECK_CMD_LEN or
IPMI_CHECK_RESERVATION macros needs to define a goto label 'out' to
handle hidden errors. Using directly a return statement has the same
effect and it removes the fact that 'out' needs to be defined.
The code exits in ipmi_sim_handle_command() are a little different
from the rest and a "possible" error in the macro IPMI_ADD_RSP_DATA is
handled before making use of it. This might be a bit excessive as a
minimum response len is currently 300 bytes and the patch checks that
at least 3 are available.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
