Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only really time-consuming operation potentially performed by
qcow2_amend_options() is zero cluster expansion when downgrading qcow2
images from compat=1.1 to compat=0.10, so report status of that
operation and that operation only through the status CB.
For this, approximate the progress as the number of L1 entries visited
during the operation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As soon as options is set in img_amend(), it needs to be freed before
the function returns. This leak is rather insignificant, as qemu-img
will exit subsequently anyway, but there's no point in not fixing it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Message-id: 1414404776-4919-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that bdrv_amend_options() supports a status callback, use it to
display a progress report.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As discussed during review a follow up for Max's fix.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1414249537-29257-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qcow2's fast bdrv_make_empty implementation on images
without internal snapshots.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-15-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevented by specifying either -d or -b) and does therefore not
work for qed and vmdk which requires it to be separate from 020.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As different image formats most probably map guest addresses to
different host addresses, add a filter to filter the host addresses out;
also, the image filename should be filtered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new parameter for qemu-img commit which may be used to
explicitly specify the backing file into which an image should be
committed if the backing chain has more than a single layer.
[Applied Eric Blake's qemu-img.texi documentation rewording
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement progress output for the commit command by querying the
progress of the block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After the top image has been committed, it should be emptied unless
specified otherwise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of taking the total length of the block device as the block
job's length, use the number of dirty sectors. The progress is now the
number of sectors mirrored to the target block device. Note that this
may result in the job's length increasing during operation, which is
however in fact desirable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As of a follow-up patch to this one, the length of a mirror block job
will no longer directly depend on the size of the block device;
therefore, drop these checks from this test. Instead, just check whether
the final offset equals the block job length.
As 041 uses the wait_until_completed function from iotests.py, the same
applies there as well which in turn affects tests 030, 055 and 056. On
the other hand, a block job's length does not have to be related to the
length of the image file in the first place, so that check was
questionable anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a block job signals readiness, this is currently reported only
through QMP. If qemu wants to use block jobs for internal tasks, there
needs to be another way to correctly detect when a block job may be
completed.
For this reason, introduce a bool "ready" which is set when the block
job may be completed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement block_job_complete_sync() by doing the exact same thing as
block_job_cancel_sync() does, only with calling block_job_complete()
instead of block_job_cancel().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement this function by making all clusters in the image file fall
through to the backing file (by using the recently extended discard).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normally, discarded sectors should read back as zero. However, there are
cases in which a sector (or rather cluster) should be discarded as if
they were never written in the first place, that is, reading them should
fall through to the backing file again.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should not be happening, but it is possible to truncate an image
outside of qemu while qemu is running (or any of the qemu tools using
the block layer. raw_co_get_block_status() should not break then.
While touching this test, replace the existing "truncate" invocation by
"$QEMU_IMG convert -f raw".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414148280-17949-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of generating the full return value thrice in try_fiemap(),
try_seek_hole() and as a fall-back in raw_co_get_block_status() itself,
generate the value only in raw_co_get_block_status().
While at it, also remove the pnum parameter from try_fiemap() and
try_seek_hole().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.
An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.
Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).
Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_opt_get_number returns a uint64_t, and curl_easy_setopt expects a
long (not an int). There is no warning about the latter type error
because curl_easy_setopt uses a varargs argument.
Store the timeout (which is a positive number of seconds) as a
uint64_t. Check that the number given by the user is reasonable.
Zero is permissible (meaning no timeout is enforced by cURL).
Cast it to long before calling curl_easy_setopt to fix the type error.
Example error message after this change has been applied:
$ ./qemu-img create -f qcow2 /tmp/test.qcow2 \
-b 'json: { "file.driver":"https",
"file.url":"https://foo/bar",
"file.timeout":-1 }'
qemu-img: /tmp/test.qcow2: Could not open 'json: { "file.driver":"https", "file.url":"https://foo/bar", "file.timeout":-1 }': timeout parameter is too large or negative: Invalid argument
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The local variable 'ac' in send_qmp_error_event() is declared with the
wrong type, which causes clang to complain when it is initialized
and again when it is used:
block.c:3655:20: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~
block.c:3655:45: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~~
block.c:3656:62: warning: implicit conversion from enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') to different enumeration type 'IoOperationType' (aka 'enum IoOperationType') [-Wenum-conversion]
qapi_event_send_block_io_error(bdrv_get_device_name(bs), ac, action,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~
Correct the type to IoOperationType, and rename the variable
to 'optype' to match its correct type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1412969583-21045-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes Ceph issue 2467: ttp://tracker.ceph.com/issues/2467
[Dropped return r in void function as suggested by Josh Durgin
<josh.durgin@inktank.com>.
--Stefan]
Signed-off-by: Adam Crume <adamcrume@gmail.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1412880272-3154-1-git-send-email-adamcrume@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
found by valgrind.
Command: ./qemu-img convert -f parallels -O qcow2 1.hds 1.img
Invalid read of size 4
at 0x17D0EF: parallels_co_read (parallels.c:357)
by 0x11FEE4: bdrv_aio_rw_vector (block.c:4640)
by 0x11FFBF: bdrv_aio_readv_em (block.c:4652)
by 0x11F55F: bdrv_co_readv_em (block.c:4862)
by 0x123428: bdrv_aligned_preadv (block.c:3056)
by 0x1239FA: bdrv_co_do_preadv (block.c:3162)
by 0x125424: bdrv_rw_co_entry (block.c:2706)
by 0x155DD9: coroutine_trampoline (coroutine-ucontext.c:118)
by 0x6975B6F: ??? (in /lib/x86_64-linux-gnu/libc-2.19.so)
The problem is that s->catalog_bitmap is allocated/filled as
gmalloc(s->catalog_size) thus index validity check must be
inclusive, i.e. index >= s->catalog_size is invalid.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-4-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is simple test image for the following commit made by me.
commit d25d598020
Author: Denis V. Lunev <den@openvz.org>
Date: Mon Jul 28 20:23:55 2014 +0400
parallels: 2TB+ parallels images support
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-3-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The image was generated using http://openvz.org/Ploop utility and properly
filled with the same content as original one.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-2-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an error occurs in bdrv_snapshot_delete_by_id_or_name(), "err" is
freed. If "err" is not set to NULL before calling
bdrv_snapshot_delete_by_id_or_name() again, it will not be updated on
error, and will be freed again.
This can be triggered by starting a VM with at least two drives and then
attempting to delete a non-existent snapshot.
Broken in commit a89d89d.
Signed-off-by: Chris Spiegel <chris.spiegel@cypherpath.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412613225-32676-1-git-send-email-chris.spiegel@cypherpath.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The SDB FIS creation was mangled;
We were writing the error byte to byte 0,
and omitting the SDB FIS magic byte.
Though the SDB packet layout states that:
byte 0: Must be 0xA1 to indicate SDB FIS.
byte 1: Port multiplier select & other flags
byte 2: status byte.
byte 3: error byte.
This patch adds an SDB FIS structure with
human-readable names, and ensures that we
are filling the structure appropriately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, DMA read/write operations neglect to update
the byte count after a successful transfer like ATAPI
DMA read or PIO read/write operations do.
We correct this oversight by adding another callback into
the IDEDMAOps structure. The commit callback is called
whenever we are cleaning up a scatter-gather list.
AHCI can register this callback in order to update post-
transfer information such as byte count updates.
We use this callback in AHCI to consolidate where we delete
the SGlist as generated from the PRDT, as well as update the
byte count after the transfer is complete.
The QEMUSGList structure has an init flag added to it in order
to make qemu_sglist_destroy a nop if it is called when
there is no sglist, which simplifies cleanup and error paths.
This patch fixes several AHCI problems, notably Non-NCQ modes
of operation for Windows 7 as well as Hibernate support for Windows 7.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, the D2H FIS packets AHCI generates simply parrot back
the LBA that the guest sent to us in the cmd_fis. However, some
commands (like READ NATIVE MAX) modify the LBA registers as a
return value, through which the AHCI D2H FIS is the only response
mechanism. Thus, the D2H response should use the current register
values, not the initial ones.
This patch adjusts the LBA and drive select register responses for
PIO Setup and D2H FIS response packets.
Additionally, the PIO and D2H FIS responses copy too many bytes
from the command FIS that it is being generated from. Specifically,
byte 11 which is the Features(15:8) field for Register Host to
Device FIS packets, is instead reserved for the PIO Setup FIS and
should always be 0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cancel oversized requests early. They would generate
an iSCSI protocol error anyway; after having transferred
possibly a lot of data over the wire.
Suggested-By: Max Reitz <mreitz@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As Max pointed out there is a hidden cast from int64_t to int for all
limits. So use the newly introduced sector_limits_lun2qemu for all
limits received from the target.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Copy the max_xfer_len from the BlockLimits VPD or use the
maximum value fitting in the CDB.
The helper function sector_limits_lun2qemu is introduced to convert
and cap the limits from the VPD to the maximum power of two fitting
in an integer; integer is the range for nb_sectors throughout
the block layer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
at least in block layer we have the case of limits being defined for a
BlockDriverState. However, in this context often zero (0) has the special
meanining of undefined which means no limit. If two of those limits are
combined and the minimum is needed the minimum function should only return
zero if both parameters are zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* remotes/sstabellini/xen-2014-10-30:
fix off-by-one error in pci_piix3_xen_ide_unplug
xen-hvm.c: Add support for Xen access to vmport
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix off-by-one error when unplugging disks, which would otherwise leave the last ATA disk plugged, with obvious consequences. Also rewrite loop to be more readable.
Signed-off-by: James Harper <james.harper@ejbdigital.com.au>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This adds synchronisation of the 6 vcpu registers (only 32bits of
them) that vmport.c needs between Xen and QEMU.
This is to avoid a 2nd and 3rd exchange between QEMU and Xen to
fetch and put these 6 vcpu registers used by the code in vmport.c
and vmmouse.c
The registers are passed in the new shared page provided by
HVM_PARAM_VMPORT_REGS_PFN.
Add new array to XenIOState that allows selection of current_cpu by
vcpu id.
Now pass XenIOState to handle_ioreq().
Add new routines regs_to_cpu(), regs_from_cpu(), and
handle_vmport_ioreq().
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
MAINTAINERS updates, and AVX512 support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUTmDNAAoJEL/70l94x66DPb0IAKKhf8IRfQZPEQgOWD2YeANd
vwAZ4JcqAl2/dbeOTrs5TXOWdoNVXUFDmeHh4zsgUB7poxsOqZ/M7N844UGR5duC
f4fKYXAkjyqocKH7dbpf/S+YuJtU40qowI02HQeEmGpZaJUjmfMAFwrguqerdMaB
pGA79948XeoAjP8jNgf1EqCqLi31GBEfiU2q05xLKxd+M0xSFIM7IM2hGZfFv7Hq
bbE2CGuCyj4NST/GH2C/22QBz9MyqFaL2prtDqoMugAHTKE7vO/rpFti9oTDRCXa
x8U/JcBf/puBNI+Kq+cdxTJicwIuqrcBkNmjP9sLv/nJ37QwEG06VDCd4Xj9mEs=
=zXqD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.
# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
aio / timers: De-document -clock
hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
virtio-scsi: sense in virtio_scsi_command_complete
target-i386: add Intel AVX-512 support
get_maintainer.pl: restrict cases where it falls back to --git
get_maintainer.pl: move git loop under "if ($email) {"
qtest: fix qtest log fd should be initialized before qtest chardev
MAINTAINERS: avoid M entries that point to mailing lists
MAINTAINERS: add some tests directories
MAINTAINERS: Add more TCG files
MAINTAINERS: add myself for X86
MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
MAINTAINERS: grab more files from Anthony's pile
target-i386: warns users when CPU threads>1 for non-Intel CPUs
sysbus: Use TYPE_DEVICE GPIO functionality
qdev: gpio: Define qdev_pass_gpios()
qdev: gpio: Remove qdev_init_gpio_out x1 restriction
qdev: gpio: delete NamedGPIOList::out
irq: Remove qemu_irq_intercept_out
qtest/irq: Rework IRQ interception
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-rng backend is currently linked twice, once in the proxy
device (e.g. virtio-rng-pci) and once in virtio-rng-device. This causes
a double unref of the backend when the parent device is unplugged.
To fix this, make the proxy device use an alias, similar to what is
already being done for the iothread link.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1414577839-18695-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
