The doc-comments which document the qdev API are split between the
header file and the C source files, because as a project we haven't
been consistent about where we put them.
Move all the doc-comments in qdev.c to the header files, so that
users of the APIs don't have to look at the implementation files for
this information.
In the process, unify them into our doc-comment format and expand on
them in some cases to clarify expected use cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200711142425.16283-2-peter.maydell@linaro.org
Implement qemu_get_thread_id() for OpenBSD hosts, using
getthrid().
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Brad Smith <brad@comstyle.com>
Message-id: CA+XhMqxD6gQDBaj8tX0CMEj3si7qYKsM8u1km47e_-U7MC37Pg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When MTE is enabled, tag memory must exist for all RAM.
It might be possible to simultaneously hot plug tag memory
alongside the corresponding normal memory, but for now just
disable hotplug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we expect KVM to support MTE at some future point,
it certainly won't be ready in time for qemu 5.1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.
Default MTE to off, since this feature implies extra overhead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here are some assorted fixes for qemu-5.1:
* SLOF update with improved TPM handling, and fix for possible stack
overflows on many-vcpu machines
* Fix for NUMA distances on NVLink2 attached GPU memory nodes
* Fixes to fail more gracefully on attempting to plug unsupported PCI bridge types
* Don't allow pnv-psi device to be user created
-----BEGIN PGP SIGNATURE-----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=CYAQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200720' into staging
ppc patch queue 20200720
Here are some assorted fixes for qemu-5.1:
* SLOF update with improved TPM handling, and fix for possible stack
overflows on many-vcpu machines
* Fix for NUMA distances on NVLink2 attached GPU memory nodes
* Fixes to fail more gracefully on attempting to plug unsupported PCI bridge types
* Don't allow pnv-psi device to be user created
# gpg: Signature made Mon 20 Jul 2020 06:29:21 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200720:
pseries: Update SLOF firmware image
spapr: Add a new level of NUMA for GPUs
spapr_pci: Robustify support of PCI bridges
ppc/pnv: Make PSI device types not user creatable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The config-devices.mak files are generated by "make", and so they
should be deleted by "make clean".
(This is different from config-host.mak and config-all-disas.mak,
which are created by "configure" and so only deleted by
"make distclean".)
If we don't delete these files on "make clean", then the build
tree is left in a state where it has the config-devices.mak
file but not the config-devices.mak.d file, and make will not
realize that it needs to rebuild config-devices.mak if, for
instance, hw/sd/Kconfig changes.
NB: config-all-devices.mak is also generated by "make", but we
already remove it on "make clean".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200717152508.10272-1-peter.maydell@linaro.org
This adds tcgbios (this was posted earlier [1] but got lost)
and fixes FDT update at ibm,client-architecture-support
for huge guests.
The full list of changes:
Alexey Kardashevskiy (4):
make: Define default rule for .c when V=1 or V=2
version: update to 20200513
fdt: Avoid recursion when traversing tree
version: update to 20200717
Gustavo Romero (1):
board-qemu: Fix comment about SLOF start address
Stefan Berger (6):
tcgbios: Only write logs for PCRs that are allocated
tcgbios: Fix the vendorInfoSize to be of type uint8_t
tcgbios: Add support for SHA3 type of algorithms
elf: Implement elf_get_file_size to determine size of an ELF image
tcgbios: Implement tpm_hash_log_extend_event_buffer
tcgbios: Measure the bootloader file read from disk
[1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
NUMA nodes corresponding to GPU memory currently have the same
affinity/distance as normal memory nodes. Add a third NUMA associativity
reference point enabling us to give GPU nodes more distance.
This is guest visible information, which shouldn't change under a
running guest across migration between different qemu versions, so make
the change effective only in new (pseries > 5.0) machine types.
Before, `numactl -H` output in a guest with 4 GPUs (nodes 2-5):
node distances:
node 0 1 2 3 4 5
0: 10 40 40 40 40 40
1: 40 10 40 40 40 40
2: 40 40 10 40 40 40
3: 40 40 40 10 40 40
4: 40 40 40 40 10 40
5: 40 40 40 40 40 10
After:
node distances:
node 0 1 2 3 4 5
0: 10 40 80 80 80 80
1: 40 10 80 80 80 80
2: 80 80 10 80 80 80
3: 80 80 80 10 80 80
4: 80 80 80 80 10 80
5: 80 80 80 80 80 10
These are the same distances as on the host, mirroring the change made
to host firmware in skiboot commit f845a648b8cb ("numa/associativity:
Add a new level of NUMA for GPU's").
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Message-Id: <20200716225655.24289-1-arbab@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some recent error handling cleanups unveiled issues with our support of
PCI bridges:
1) QEMU aborts when using non-standard PCI bridge types,
unveiled by commit 7ef1553dac "spapr_pci: Drop some dead error handling"
$ qemu-system-ppc64 -M pseries -device pcie-pci-bridge
Unexpected error in object_property_find() at qom/object.c:1240:
qemu-system-ppc64: -device pcie-pci-bridge: Property '.chassis_nr' not found
Aborted (core dumped)
This happens because we assume all PCI bridge types to have a "chassis_nr"
property. This property only exists with the standard PCI bridge type
"pci-bridge" actually. We could possibly revert 7ef1553dac but it seems
much simpler to check the presence of "chassis_nr" earlier.
2) QEMU abort if same "chassis_nr" value is used several times,
unveiled by commit d2623129a7 "qom: Drop parameter @errp of
object_property_add() & friends"
$ qemu-system-ppc64 -M pseries -device pci-bridge,chassis_nr=1 \
-device pci-bridge,chassis_nr=1
Unexpected error in object_property_try_add() at qom/object.c:1167:
qemu-system-ppc64: -device pci-bridge,chassis_nr=1: attempt to add duplicate property '40000100' to object (type 'container')
Aborted (core dumped)
This happens because we assume that "chassis_nr" values are unique, but
nobody enforces that and we end up generating duplicate DRC ids. The PCI
code doesn't really care for duplicate "chassis_nr" properties since it
is only used to initialize the "Chassis Number Register" of the bridge,
with no functional impact on QEMU. So, even if passing the same value
several times might look weird, it never broke anything before, so
I guess we don't necessarily want to enforce strict checking in the PCI
code now.
Workaround both issues in the PAPR code: check that the bridge has a
unique and non null "chassis_nr" when plugging it into its parent bus.
Fixes: 05929a6c5d ("spapr: Don't use bus number for building DRC ids")
Fixes: 7ef1553dac ("spapr_pci: Drop some dead error handling")
Fixes: d2623129a7 ("qom: Drop parameter @errp of object_property_add() & friends")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159431476748.407044.16711294833569014964.stgit@bahia.lan>
[dwg: Move check slightly to a better place]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU aborts with -device pnv-psi-POWER8:
$ qemu-system-ppc64 -device pnv-psi-POWER8
qemu-system-ppc64: hw/intc/xics.c:605: ics_realize: Assertion
`ics->xics' failed.
Aborted (core dumped)
The Processor Service Interface Controller is an internal device.
It should only be instantiated by the chip, which takes care of
configuring the link required by the ICS object in the case of
POWER8. It doesn't make sense for a user to specify it on the
command line.
Note that the PSI model for POWER8 was added 3 yrs ago but the
devices weren't available on the command line because of a bug
that was fixed by recent commit 2f35254aa0 ("pnv/psi: Correct
the pnv-psi* devices not to be sysbus devices").
Fixes: 54f59d786c ("ppc/pnv: Add cut down PSI bridge model and hookup external interrupt")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159413975752.169116.5808968580649255382.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some minor man page updates for fairly obvious things.
The set sensor command addition has been in the Power group's tree for a
long time and I have neglected to submit it.
-corey
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAl8R1awACgkQYfOMkJGb
/4FtGRAAjYz9JP2yzbzWn7y/c0PqZy5MJKR5BayObD/ZjjUQjfGMUa/1nEixvwXC
HznS7zWOpnEzdqmlZaMSvoSDd8+DwNfj8Ekp5Uvvdef2GPCrZk/SX0qZWjj2dAPY
CUHZRSjMU27Q3vft9DDDAaGYTEDAMBg4WFOipvor3+saHETCK2WIhMHRlRrko8o6
FbVKT4lw84xe36q7dEZVTO62etyTETE7NbBwO9TWpxV1mYM5QCY5U6XjpjUluy1g
G61zogYI93Cg+9mQLb2Q7BS1umCDkwv+dCdzeulriEbJ3TaU590Mt5fuxy1pMGgx
NjUWmBs7PV9w1Qg10AFqSNQeEQgx4MnL2otARMmFoCiGLK8YtafGQc9Ym644D9H5
WVLdXMJFw/Vddyg4GS9CY9o4gnR2ySZCCajq31uuqH+kQaHlMFUnN4Op6NYGb+y0
pop/BzyN4SI5vALL4L2cdVaynlKRdf8DcSwH7HjIiZPGGn4OG4QI1lEM/XBL+Hb1
pBeoBcGJA3pNTVFgSOseNKSJpxHR0S4SC4NwZ3zS4LHthr3K36905OaKvLVxxbt4
gxc1vWQklCd/BercTRTDOh2QfbIERVPFRxxBHJu8fL/94oRSszjqMdLB5dG2gTGF
31FlIxA5I/rE5rzU/QYOHDDvVkuYZM3kapSAoMQiTGY8DoqfpdA=
=VTO7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-ipmi-5' into staging
Man page update and new set sensor command
Some minor man page updates for fairly obvious things.
The set sensor command addition has been in the Power group's tree for a
long time and I have neglected to submit it.
-corey
# gpg: Signature made Fri 17 Jul 2020 17:45:32 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-ipmi-5:
ipmi: add SET_SENSOR_READING command
ipmi: Fix a man page entry
ipmi: Add man page pieces for the IPMI PCI devices
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When single-stepping with a debugger attached to QEMU, and when an
interrupt is raised, the debugger misses the first instruction after
the interrupt.
Tested-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/757702
Message-Id: <20200717163029.2737546-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SET_SENSOR_READING is a complex IPMI command (see IPMI spec 35.17)
which enables the host software to set the reading value and the event
status of sensors supporting it.
Below is a proposal for all the operations (reading, assert, deassert,
event data) with the following limitations :
- No event are generated for threshold-based sensors.
- The case in which the BMC needs to generate its own events is not
supported.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20191118092429.16149-1-clg@kaod.org>
[Moved the break statement for case SENSOR_GEN_EVENT_DATA above the
closing brace to keep the indention consistent.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The line was too long, and some of the entries were wrong (fur instead
of fru). Just use the prop=val thing tha other entries use.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
-----BEGIN PGP SIGNATURE-----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=ijIG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
# gpg: Signature made Fri 17 Jul 2020 13:31:18 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Fix leaked fd in raw_open_common() error path
file-posix: Fix check_hdev_writable() with auto-read-only
file-posix: Move check_hdev_writable() up
file-posix: Allow byte-aligned O_DIRECT with NFS
block: Require aligned image size to avoid assertion failure
iotests: test shutdown when bitmap is exported through NBD
nbd: make nbd_export_close_all() synchronous
iotests/030: Reduce job speed to make race less likely
crypto: use a stronger private key for tests
qemu-img resize: Require --shrink for shrinking all image formats
Remove VXHS block device
vvfat: set status to odd fixes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We shouldn't fail when finding an unnamed bitmap in a unnamed node or
node with auto-generated node name, as bitmap migration ignores such
bitmaps in the first place.
Fixes: 82640edb88
Fixes: 4ff5cc121b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200626130658.76498-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For Linux block devices, being able to open the device read-write
doesn't necessarily mean that the device is actually writable (one
example is a read-only LV, as you get with lvchange -pr <device>). We
have check_hdev_writable() to check this condition and fail opening the
image read-write if it's not actually writable.
However, this check doesn't take auto-read-only into account, but
results in a hard failure instead of downgrading to read-only where
possible.
Fix this and do the writable check not based on BDRV_O_RDWR, but only
when this actually results in opening the file read-write. A second
check is inserted in raw_reconfigure_getfd() to have the same check when
dynamic auto-read-only upgrades an image file from read-only to
read-write.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need to call it in raw_open_common(), so move the function to
avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit a6b257a08e ('file-posix: Handle undetectable alignment'),
we assume that if we open a file with O_DIRECT and alignment probing
returns 1, we just couldn't find out the real alignment requirement
because some filesystems make the requirement only for allocated blocks.
In this case, a safe default of 4k is used.
This is too strict for NFS, which does actually allow byte-aligned
requests even with O_DIRECT. Because we can't distinguish both cases
with generic code, let's just look at the file system magic and disable
s->needs_alignment for NFS. This way, O_DIRECT can still be used on NFS
for images that are not aligned to 4k.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200716142601.111237-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unaligned requests will automatically be aligned to bl.request_alignment
and we can't extend write requests to access space beyond the end of the
image without resizing the image, so if we have the WRITE permission,
but not the RESIZE one, it's required that the image size is aligned.
Failing to meet this requirement could cause assertion failures like
this if RESIZE permissions weren't requested:
qemu-img: block/io.c:1910: bdrv_co_write_req_prepare: Assertion `end_sector <= bs->total_sectors || child->perm & BLK_PERM_RESIZE' failed.
This was e.g. triggered by qemu-img converting to a target image with 4k
request alignment when the image was only aligned to 512 bytes, but not
to 4k.
Turn this into a graceful error in bdrv_check_perm() so that WRITE
without RESIZE can only be taken if the image size is aligned. If a user
holds both permissions and drops only RESIZE, the function will return
an error, but bdrv_child_try_set_perm() will ignore the failure silently
if permissions are only requested to be relaxed and just keep both
permissions while returning success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200716142601.111237-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test shutdown when bitmap is exported through NBD and active client
exists. The previous patch fixes a crash, provoked by this scenario.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200714162234.13113-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Consider nbd_export_close_all(). The call-stack looks like this:
nbd_export_close_all() -> nbd_export_close -> call client_close() for
each client.
client_close() doesn't guarantee that client is closed: nbd_trip()
keeps reference to it. So, nbd_export_close_all() just reduce
reference counter on export and removes it from the list, but doesn't
guarantee that nbd_trip() finished neither export actually removed.
Let's wait for all exports actually removed.
Without this fix, the following crash is possible:
- export bitmap through internal Qemu NBD server
- connect a client
- shutdown Qemu
On shutdown nbd_export_close_all is called, but it actually don't wait
for nbd_trip() to finish and to release its references. So, export is
not release, and exported bitmap remains busy, and on try to remove the
bitmap (which is part of bdrv_close()) the assertion fails:
bdrv_release_dirty_bitmap_locked: Assertion `!bdrv_dirty_bitmap_busy(bitmap)' failed
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200714162234.13113-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can happen that the throttling of the stream job doesn't make it slow
enough that we can be sure that it still exists when it is referenced
again. Just use a much smaller speed to make this very unlikely to
happen again.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200716132829.20127-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The unit tests using the x509 crypto functionality have started
failing in Fedora 33 rawhide with a message like
The certificate uses an insecure algorithm
This is result of Fedora changes to support strong crypto [1]. RSA
with 1024 bit key is viewed as legacy and thus insecure. Generate
a new private key which is 3072 bits long and reasonable future
proof.
[1] https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200715154701.1041325-1-berrange@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU 2.11 introduced the --shrink option for qemu-img resize to avoid
accidentally shrinking images (commit 4ffca8904a). However, for
compatibility reasons, it was not enforced for raw images yet, but only
a deprecation warning was printed. This warning has existed for long
enough that we can now finally require --shrink for raw images, too, and
error out if it's not given.
Documentation already describes the state as it is after this patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710121717.28339-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Virtual VFAT driver is quite old and rarely used. Set its status
to Odd Fixes.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200710190451.761286-1-ppandit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix the type name in the mdevctl example.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200716145031.771476-1-cohuck@redhat.com>
So far we neither compile-tested nor run any of the new fuzzers in our CI,
which led to some build failures of the fuzzer code in the past weeks.
To avoid this problem, add a job to compile the fuzzer code and run some
loops (which likely don't find any new bugs via fuzzing, but at least we
know that the code can still be run).
A nice side-effect of this test is that the leak tests are enabled here,
so we should now notice some of the memory leaks in our code base earlier.
Message-Id: <20200716100950.27396-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e8c9e65816 "qom: Make "info qom-tree" show children sorted"
created a memory leak, because I didn't realize
object_get_canonical_path_component()'s value needs to be freed.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -S -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info qom-tree
This leaks some 4500 path components, 12-13 characters on average,
i.e. roughly 100kBytes depending on the allocator. A couple of
hundred "info qom-tree" here, a couple of hundred there, and soon
enough we're talking about real memory.
Plug the leak.
Fixes: e8c9e65816
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reported-by: Reviewed-by: Li Qiang <liq3ea@gmail.com> [sent same patch]
Message-Id: <20200714160202.3121879-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The configure script currently refuses to succeed when run on macOS
with --enable-werror:
ERROR: configure test passed without -Werror but failed with -Werror.
The information in config.log indicates:
config-temp/qemu-conf.c:3:55: error: control reaches end of non-void
function [-Werror,-Wreturn-type]
static void *f(void *p) { pthread_setname_np("QEMU"); }
^
And indeed, the return statement is missing here.
Fixes: 479a57475e ("util: Implement debug-threads for macOS")
Message-Id: <20200716055655.24507-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the initial FuzzTarget, get_init_cmdline returned a char *. With this
API, we had no guarantee about where the string came from. For example,
i440fx-qtest-reboot-fuzz simply returned a pointer to a string literal,
while the QOS-based targets build the arguments out in a GString an
return the gchar *str pointer. Since we did not try to free the cmdline,
we have a leak for any targets that do not simply return string
literals. Clean up this mess by forcing fuzz-targets to return
a GString, that we can free.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200714174616.20709-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Properly free each test response to avoid memory leak and separate
qtest_qmp() calls with spare lines, in a consistent manner.
Fixes: 5b88849e7b9("tests/qmp-cmd-test: Add qmp/object-add-failure-modes")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200715154117.15456-1-liq3ea@163.com>
Fixes: 9fc719b869 ("tests/qmp-cmd-test: Add qmp/object-add-duplicate-id")
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When single-stepping with a debugger attached to QEMU, and when an
exception is raised, the debugger misses the first instruction after the
exception:
$ qemu-system-aarch64 -M virt -display none -cpu cortex-a53 -s -S
$ aarch64-linux-gnu-gdb
GNU gdb (GDB) 9.2
[...]
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x0000000000000000 in ?? ()
(gdb) # writing nop insns to 0x200 and 0x204
(gdb) set *0x200 = 0xd503201f
(gdb) set *0x204 = 0xd503201f
(gdb) # 0x0 address contains 0 which is an invalid opcode.
(gdb) # The CPU should raise an exception and jump to 0x200
(gdb) si
0x0000000000000204 in ?? ()
With this commit, the same run steps correctly on the first instruction
of the exception vector:
(gdb) si
0x0000000000000200 in ?? ()
Buglink: https://bugs.launchpad.net/qemu/+bug/757702
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20200716193947.3058389-1-luc.michel@greensocs.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes for x86 that missed hard freeze:
* Don't trigger warnings for features set by
CPU model versions (Xiaoyao Li)
* Missing features in Icelake-Server, Skylake-Server,
Cascadelake-Server CPU models (Chenyi Qiang)
* Fix hvf x86_64 guest boot crash (Roman Bolshakov)
-----BEGIN PGP SIGNATURE-----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=17fk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 fixes for -rc1
Fixes for x86 that missed hard freeze:
* Don't trigger warnings for features set by
CPU model versions (Xiaoyao Li)
* Missing features in Icelake-Server, Skylake-Server,
Cascadelake-Server CPU models (Chenyi Qiang)
* Fix hvf x86_64 guest boot crash (Roman Bolshakov)
# gpg: Signature made Thu 16 Jul 2020 19:17:18 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: hvf: Explicitly set CR4 guest/host mask
target/i386: add the missing vmx features for Skylake-Server and Cascadelake-Server CPU models
target/i386: fix model number and add missing features for Icelake-Server CPU model
target/i386: add fast short REP MOV support
i386/cpu: Don't add unavailable_features to env->user_features
i368/cpu: Clear env->user_features after loading versioned CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Forgetting this asserts when tcg_gen_cmp_vec is called from
within tcg_gen_cmpsel_vec.
Fixes: 72b4c792c7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit d88c42ff2c we added new prototype but neglected to
add their documentation. Fix that.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-6-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We use "create_simple" names for functions that allocate, initialize,
configure and realize device objects: pci_create_simple(),
isa_create_simple(), usb_create_simple(). For consistency, rename
i2c_create_slave() as i2c_slave_create_simple(). Since we have
to update all the callers, also let it return a I2CSlave object.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-5-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The other i2c functions are called i2c_slave_FOO(). Rename as
i2c_slave_realize_and_unref() to be consistent.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-4-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
