Will be required when we no longer let i8259_init allocate the PIC IRQs
but convert that chips to qdev.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ISA bus IRQ range is 0..15. What isa_irq_handler and IsaIrqState are
actually dealing with are the Global System Interrupts. Refactor the
code to clarify this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
IsaIrqState::ioapic is always non-NULL. Probably, the concrete
qemu_irq was supposed to be tested, but that's already done by
qemu_set_irq.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is OpenCores Ethernet MAC + subset of National Semiconductors
DP83838C PHY.
OpenCores Ethernet MAC project: http://opencores.org/project,ethmac
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is to get aligned with the linux name for this machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Xtensa cores may have different mapping of external interrupt pins to
internal IRQ numers. Implement API to acquire core IRQ by its external
interrupt number.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
QEMU timer is used to post CCOMPARE interrupt when the core is halted.
If that CCOMPARE interrupt is masked off then the timer must be rearmed
in the callback, otherwise it will be rearmed next time the core goes to
halt by the waiti instruction.
Add test case into timer testsuite.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit future per-device
coalesced MMIO rings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
interrput -> interrupt
Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Calling usb_packet_complete() recursively when passing up the completion
event up the chain for devices connected via usb hub will trigger an
assert. So don't do that, make the usb hub emulation call the upstream
completion callback directly instead.
Based on a patch from Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu uses the ps/2 mouse by default. The usb tablet (or mouse) is
activated as soon as qemu sees some guest activity on the device,
i.e. polling for HID events. That used to work fine for both fresh
boot and migration.
Remote wakeup support changed the picture though: There will be no
polling after migration in case the guest suspended the usb bus,
waiting for wakeup events. Result is that the ps/2 mouse stays
active.
Fix this by activating the usb tablet / mouse in post_load() in case
the guest enabled remote wakeup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Honour the maximum packet size for endpoints; this applies when
sending non-isochronous data and means we transfer only as
much as the endpoint allows, leaving the transfer descriptor
on the list for another go next time around. This allows
usb-net to work when connected to an OHCI controller model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OHCI Transfer Descriptor T (DataToggle) bits are 24 and 25;
fix an error which accidentally overlaid them both on the same bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach(). Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.
This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers. The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When a usb packet is canceled we need to check whenever we actually have
a scsi request in flight before we try to cancel it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All users have been converted to either isa_register_ioport
or isa_register_old_portio_list.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
[jan: fix cut'n'paste errors]
[avi: adjust pci variants not to use isa functions]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only user of ISADevice.ioports is isabus_get_fw_dev_path, and it
only looks at the first entry of the array. Which suggests that this
entire array+sort operation can be replaced by a simple minimum.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Clean up versatile_pci to expose the various PCI mmio regions
properly as separate mmio regions rather than as a single mmio
which uses callbacks to map and unmap everything.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Clean up the initialisation of the realview_mpcore device to avoid
using sysbus_init_mmio_cb2(): we can pass through the MemoryRegion
of the private arm11mpcore_priv device directly now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
