Testing granularity at the same size as the cluster isn't quite
as fun as what happens when it is larger or smaller. This
enhancement also shows that qemu's nbd server can serve the
same disk over multiple exports simultaneously.
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the submission and completion queues are being torn down
the IRQ will be asserted for the completion queue when the
submsission queue is deleted. Then when the completion queue
is deleted it stays asserted. Thus, on systems that do
not use MSI, no further interrupts can be triggered on the host.
Linux sees this as a long delay when unbinding the nvme device.
Eventually the interrupt timeout occurs and it continues.
To fix this we ensure we deassert the IRQ for a CQ when it is
deleted.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The CMB is marked as DEVICE_LITTLE_ENDIAN, so the data must be
read/written as if it was little-endian output (in the case of
big endian, we get two swaps, one in the memory core and one
in nvme.c).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the CMB BAR has a min_access_size of 2, if you read the last
byte it will try to memcpy *2* bytes from n->cmbuf, causing an off-by-one
error. This is CVE-2018-16847.
Another way to fix this might be to register the CMB as a RAM memory
region, which would also be more efficient. However, that might be a
change for big-endian machines; I didn't think this through and I don't
know how real hardware works. Add a basic testcase for the CMB in case
somebody does this change later on.
Cc: Keith Busch <keith.busch@intel.com>
Cc: qemu-block@nongnu.org
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When blk_flush called in NVMe reset path S/C queues are already freed
which means that re-entering AIO handling loop having some IO requests
unfinished will lockup or crash as their SG structures being potentially
reused. Call blk_drain before freeing the queues to avoid this nasty
scenario.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first qemu-io command must honour the $IMGFMT that is set rather
than hardcoding qcow2. The qemu-nbd commands should also set $IMGFMT
to avoid the insecure format probe warning.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit e35bdc123a added the auto-read-only option and the
code to update its corresponding flag in update_flags_from_options(),
but forgot to clear the flag if auto-read-only is false.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 40dce4ee6 "scsi-disk: fix rerror/werror=ignore" introduced a
bug which causes qemu to crash with the assertion error below if the
host file or disk returns an error:
qemu-system-x86_64: hw/scsi/scsi-bus.c:1374: scsi_req_complete:
Assertion `req->status == -1' failed.
Kevin Wolf suggested this fix:
< kwolf> Hm, should the final return false; in that patch
actually be a return true?
< kwolf> Because I think he didn't intend to change anything
except BLOCK_ERROR_ACTION_IGNORE
Buglink: https://bugs.launchpad.net/qemu/+bug/1804323
Fixes: 40dce4ee61
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide default RAM sizes for all XTFPGA boards, so that when started
without -m option they do the right thing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
create_opts was leaked here. This is not too bad since the process is
about to exit anyway, but relying on that does not make the code nicer
to read.
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The use of TLS while building qemu is optional. While the
'certtool' binary should be available on every platform that
supports building against TLS, that does not imply that the
developer has installed it. Make the test gracefully skip
in that case.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Current COLO mode(independent disk mode) need replication module work
together. Suggested by Dr. David Alan Gilbert <dgilbert@redhat.com>.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20181114190912.7242-1-chen.zhang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This compilation issue will occur when user use --disable-replication
to config Qemu.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Message-Id: <20181101021226.6353-1-zhangckid@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
TestCase.assertEquals() is deprecated since Python 2.7. Recent Python
versions print a warning when the function is called, which makes test
cases fail.
Replace it with the preferred spelling assertEqual().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
time.clock() is deprecated since Python 3.3. Current Python versions
warn that the function will be removed in Python 3.8, and those warnings
make the test case 118 fail.
Replace it with the Timeout mechanism that is compatible with both
Python 2 and 3, and makes the code even a little nicer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now that xtensa_count_regs does the right thing, remove manual
initialization of these fields from the affected configurations and let
xtensa_finalize_config initialize them. Add XTREG_END to terminate
register lists.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In order to communicate correctly with gdb xtensa gdbstub must provide
expected number of registers in 'g' packet response. xtensa-elf-gdb
expects both nonprivileged and privileged registers. xtensa-linux-gdb
only expects nonprivileged registers. gdb only counts one contiguous
stretch of registers, do the same for the core registers in the
xtensa_count_regs.
With this change qemu-system-xtensa is able to communicate with all
xtensa-elf-gdb versions (versions prior to 8.2 require overlay fixup),
and qemu-xtensa is able to communicate with all xtensa-linux-gdb
versions, except 8.2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We have a couple of PC_COMPAT_3_0, so we should have 3.1 PC machines,
and update the 3.0 machines to make use of those.
Fixes a "Known issue" from https://wiki.qemu.org/Planning/3.1.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20181120132604.22854-1-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
misbehaving guest. This is a follow-up to commit:
commit 5b76ef50f6
Author: Greg Kurz <groug@kaod.org>
Date: Wed Nov 7 01:00:04 2018 +0100
9p: write lock path in v9fs_co_open2()
-----BEGIN PGP SIGNATURE-----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=Lt1w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Fixes yet another use-after-free issue that could be triggered by a
misbehaving guest. This is a follow-up to commit:
commit 5b76ef50f6
Author: Greg Kurz <groug@kaod.org>
Date: Wed Nov 7 01:00:04 2018 +0100
9p: write lock path in v9fs_co_open2()
# gpg: Signature made Tue 20 Nov 2018 12:01:07 GMT
# gpg: using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/for-upstream:
9p: take write lock on fid path updates (CVE-2018-19364)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent commit 5b76ef50f6 fixed a race where v9fs_co_open2() could
possibly overwrite a fid path with v9fs_path_copy() while it is being
accessed by some other thread, ie, use-after-free that can be detected
by ASAN with a custom 9p client.
It turns out that the same can happen at several locations where
v9fs_path_copy() is used to set the fid path. The fix is again to
take the write lock.
Fixes CVE-2018-19364.
Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Record the command line that was used to start QEMU. This can be
useful for debugging.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
[thuth: removed trailing \n from the message string]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Seabios 1.12 has been released yesterday. Update
our snapshot builds to the final release.
git shortlog
============
Kevin O'Connor (2):
shadow: Rework bios copy code to prevent gcc array-bounds warning
docs: Note v1.12.0 release
Shmuel Eiderman (1):
pvscsi: Scan all 64 possible targets
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Once a test has finished, the pcibus structure should be freed, to
avoid leaking memory and to make sure that the structure is properly
re-initialized when the next test starts.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_qmp_missing_any_arg() is about a bug in infrastructure used by
the QMP core, fixed in commit c489780203. We covered the bug in
infrastructure unit tests (commit bce3035a44). Let's test
it at the QMP level as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[thuth: Tweaked the commit message according to Markus' suggestion]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add iotest coverage for NBD connections using TLS, including
a couple of code fixes that it pointed out
- Mao Zhongyi: 0/3 Do some cleaning work in qemu-iotests
- Daniel P. Berrangé: io: return 0 for EOF in TLS session read after shutdown
- Daniel P. Berrangé: 0/6 Misc fixes to NBD
- Eric Blake: iotests: Drop use of bash keyword 'function'
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJb8vZEAAoJEKeha0olJ0NqaFoH/1tCmzPb/EqjaK+AtXvy5f62
dpxWmZKweVBoWTxMMG23gK+0Xzeji5PBCfsuByZQNniJnEeXMSyMpK5rAgstSENd
9kxVmGB3w/76StqIgvnYL3yS+uf30+U6TP0Zc+2Y1gi3oy+Y46OClQG7+mAMRMRf
fD96zXwpjESvNQYlON1a7vyTeKFRo534zC/L5aLzD8z/4DGThKHtH1fnju1/samx
y2Gak2agVGcXqV6J8kDMDRtaQ42RgILoUSoBFyMeX+rABjU3IWXhAnsYrisW74qN
giqugyJE2NVJuQNPW/mg0wSKXEMCD5neL4ZQCfxzXyJtIvPsz52PjS+yXXIS0Xg=
=B/uF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-11-19' into staging
nbd patches for 2018-11-19
Add iotest coverage for NBD connections using TLS, including
a couple of code fixes that it pointed out
- Mao Zhongyi: 0/3 Do some cleaning work in qemu-iotests
- Daniel P. Berrangé: io: return 0 for EOF in TLS session read after shutdown
- Daniel P. Berrangé: 0/6 Misc fixes to NBD
- Eric Blake: iotests: Drop use of bash keyword 'function'
# gpg: Signature made Mon 19 Nov 2018 17:43:32 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-11-19:
iotests: Drop use of bash keyword 'function'
iotests: Also test I/O over NBD TLS
tests: exercise NBD server in TLS mode
tests: add iotests helpers for dealing with TLS certificates
tests: check if qemu-nbd is still alive before waiting
tests: pull qemu-nbd iotest helpers into common.nbd file
io: return 0 for EOF in TLS session read after shutdown
nbd/server: Ignore write errors when replying to NBD_OPT_ABORT
nbd: fix whitespace in server error message
qemu-iotests: Modern shell scripting (use $() instead of ``)
qemu-iotests: convert `pwd` and $(pwd) to $PWD
qemu-iotests: remove unused variable 'here'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bash allows functions to be declared with or without the leading
keyword 'function'; but including the keyword does not comply with
POSIX syntax, and is confusing to ksh users where the use of the
keyword changes the scoping rules for functions. Stick to the
POSIX form through iotests.
Done mechanically with:
sed -i 's/^function //' $(git ls-files tests/qemu-iotests)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181116215002.2124581-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Enhance test 233 to also perform I/O beyond the initial handshake.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181118022403.2211483-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests that validate it is possible to connect to an NBD server
running TLS mode. Also test mis-matched TLS vs non-TLS connections
correctly fail.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-7-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to iotests shell cleanups, use ss instead of socat for
port probing, sanitize port number in expected output]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helpers to common.tls for creating TLS certificates for a CA,
server and client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-6-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling and quoting touchups]
Signed-off-by: Eric Blake <eblake@redhat.com>
If the qemu-nbd UNIX socket has not shown up, the tests will sleep a bit
and then check again repeatedly for up to 30 seconds. This is pointless
if the qemu-nbd process has quit due to an error, so check whether the
pid is still alive before waiting and retrying.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The helpers for starting/stopping qemu-nbd in 058 will be useful in
other test cases, so move them into a common.nbd file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.
This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.
The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with
Cannot read from TLS channel: Broken pipe
The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 37ec36f6 intentionally ignores errors when trying to reply
to an NBD_OPT_ABORT request for plaintext clients, but did not make
the same change for a TLS server. Since NBD_OPT_ABORT is
documented as being a potential for an EPIPE when the client hangs
up without waiting for our reply, we don't need to pollute the
server's output with that failure.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181117223221.2198751-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A space was missing after the option number was printed:
Option 0x8not permitted before TLS
becomes
Option 0x8 not permitted before TLS
This fixes
commit 3668328303
Author: Eric Blake <eblake@redhat.com>
Date: Fri Oct 14 13:33:09 2016 -0500
nbd: Send message along with server NBD_REP_ERR errors
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: move lone space to next line]
Signed-off-by: Eric Blake <eblake@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using
$() everywhere. For now, just do the qemu-iotests directory.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-4-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
* various MAINTAINERS file updates
* hw/block/onenand: use qemu_log_mask() for reporting
* hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
on the n800 and n810 machine models
* target/arm: fix smc incorrectly trapping to EL3 when secure is off
* hw/arm/stm32f205: Fix the UART and Timer region size
* target/arm: read ID registers for KVM guests so they can be
used to gate "is feature X present" checks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJb8t08AAoJEDwlJe0UNgzecFIP/Are0UdNt9Tr0K1OCE4XjFCn
HtupNyE/woN4IOa1lQrCig8C2xvL6BHqPerf/NZc3z4NXUDpzr3/dJvb66aw3ilB
GZhMRFoaFaPgD9uKojLO9ym09WjNjfb3/5J7CacPJaQCwwqXHUiuV6kZDVP3wM2m
SBWBblNadNx+uU9LFpBmO+Dk2MShh1nt2ujVRqHVo1/AUZvyZZZrBuXvqM3ykdGx
eboNBSN6TuyaFwOcofZbN+UsS0Eu8XlRvBwEFaIH9UcKR8nfj7l4HLBDTMSfi1ms
KFp2mZjFGOuDcUnyshl2MmfZG76mmKTac2O2WFZ7ESMp8N21YksEe9y6hrhLuzYS
CoUc1evzo8q9cmxNlnWCyWL2UYJKM+hPxUICg5IktDtqNmMuNJvhWgHN3j++Gahd
KWWJQCC1xIVxfLFyfB6B/VcFTLybLGPHe3S4F4VYhmFJAnR3kq/2MlhHwmIqeAfh
l9NaSHp+pTAILE2OQLnCmVBsUHBYQxz7QV5jSK8Pd9m0v2zlipIv9CAaXPpA8oV4
O5erkaw+qjErX9v30ASbtKt5yyUOHbZwK/imo6SDi6jz9W92sCgHFC/P2UdcSUmO
ai00NfS3zG3NxYP4GK7Km1PD8WrxCDl7N+oEgjGYbyZJIQFokakNVgM1/uSnVi2N
mFXg3ArAtH8IrW8OAJSH
=t7Fy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181119' into staging
target-arm queue:
* various MAINTAINERS file updates
* hw/block/onenand: use qemu_log_mask() for reporting
* hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
on the n800 and n810 machine models
* target/arm: fix smc incorrectly trapping to EL3 when secure is off
* hw/arm/stm32f205: Fix the UART and Timer region size
* target/arm: read ID registers for KVM guests so they can be
used to gate "is feature X present" checks
# gpg: Signature made Mon 19 Nov 2018 15:56:44 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20181119:
MAINTAINERS: list myself as maintainer for various Arm boards
hw/block/onenand: use qemu_log_mask() for reporting
hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
target/arm: fix smc incorrectly trapping to EL3 when secure is off
hw/arm/stm32f205: Fix the UART and Timer region size
MAINTAINERS: Add entries for missing ARM boards
target/arm: Fill in ARMISARegisters for kvm32
target/arm: Introduce read_sys_reg32 for kvm32
target/arm: Fill in ARMISARegisters for kvm64
target/arm: Install ARMISARegisters from kvm host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In practice for most of the more-or-less orphan Arm board models,
I will review patches and put them in via the target-arm tree.
So list myself as an "Odd Fixes" status maintainer for them.
This commit downgrades these boards to "Odd Fixes":
* Allwinner-A10
* Exynos
* Calxeda Highbank
* Canon DIGIC
* Musicpal
* nSeries
* Palm
* PXA2xx
These boards were already "Odd Fixes":
* Gumstix
* i.MX31 (kzm)
Philippe Mathieu-Daudé has requested to be moved to R:
status for Gumstix now that I am listed as the M: contact.
Some boards are maintained, but their patches still go
via the target-arm tree, so add myself as a secondary
maintainer contact for those:
* Xilinx Zynq
* Xilinx ZynqMP
* STM32F205
* Netduino 2
* SmartFusion2
* Mecraft M2S-FG484
* ASPEED BMCs
* NRF51
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181108134139.31666-1-peter.maydell@linaro.org
Update the onenand device to use qemu_log_mask() for reporting
guest errors and unimplemented features, rather than plain
fprintf() and hw_error().
(We leave the hw_error() in onenand_reset(), as that is
triggered by a failure to read the underlying block device
for the bootRAM, not by guest action.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181115143535.5885-3-peter.maydell@linaro.org
An off-by-one error in a switch case in onenand_read() allowed
a misbehaving guest to read off the end of a block of memory.
NB: the onenand device is used only by the "n800" and "n810"
machines, which are usable only with TCG, not KVM, so this is
not a security issue.
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181115143535.5885-2-peter.maydell@linaro.org
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit fixes a case where the CPU would try to go to EL3 when
executing an smc instruction, even though ARM_FEATURE_EL3 is false. This
case is raised when the PSCI conduit is set to smc, but the smc
instruction does not lead to a valid PSCI call.
QEMU crashes with an assertion failure latter on because of incoherent
mmu_idx.
This commit refactors the pre_smc helper by enumerating all the possible
way of handling an scm instruction, and covering the previously missing
case leading to the crash.
The following minimal test would crash before this commit:
.global _start
.text
_start:
ldr x0, =0xdeadbeef ; invalid PSCI call
smc #0
run with the following command line:
aarch64-linux-gnu-gcc -nostdinc -nostdlib -Wl,-Ttext=40000000 \
-o test test.s
qemu-system-aarch64 -M virt,virtualization=on,secure=off \
-cpu cortex-a57 -kernel test
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20181117160213.18995-1-luc.michel@greensocs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The UART and timer devices for the stm32f205 were being created
with memory regions that were too large. Use the size specified
in the chip datasheet.
The old sizes were so large that the devices would overlap with
each other in the SoC memory map, so this fixes a bug that
caused odd behavior and/or crashes when trying to set up multiple
UARTs.
Signed-off-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rephrased commit message to follow our usual standard]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>