GTK uses different hardware keycodes on Windows hosts, so some special
handling is needed to get the QEMU keycode.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The original patch from Liu Jinsong restricted them to reset or full
state updates, but that's unnecessary (and wrong) since the BNDCFGS
MSR has no side effects.
Cc: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PulseAudio requires the use of shared memory so add shmget(), shmat(),
and shmdt() to the syscall whitelist.
Reported-by: xuhan@redhat.com
Signed-off-by: Paul Moore <pmoore@redhat.com>
The PulseAudio library attempts to do a mkdir(2) and fchmod(2) on
"/run/user/<UID>/pulse" which is currently blocked by the syscall
filter; this patch adds the two missing syscalls to the whitelist.
You can reproduce this problem with the following command:
# qemu -monitor stdio -device intel-hda -device hda-duplex
If watched under strace the following syscalls are shown:
mkdir("/run/user/0/pulse", 0700)
fchmod(11, 0700) [NOTE: 11 is the fd for /run/user/0/pulse]
Reported-by: xuhan@redhat.com
Signed-off-by: Paul Moore <pmoore@redhat.com>
VFIO virtualizes MSIX table for the guest but not mapping the part of
a BAR which contains an MSIX table. Since vfio_mmap_bar() mmaps chunks
before and after the MSIX table, they have to be aligned to the host
page size which may be TARGET_PAGE_MASK (4K) or 64K in case of PPC64.
This fixes boundaries calculations to use the real host page size.
Without the patch, the chunk before MSIX table may overlap with the MSIX
table and mmap will fail in the host kernel. The result will be serious
slowdown as the whole BAR will be emulated by QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There is a HOST_PAGE_ALIGN macro which makes sense for KVM accelerator
but it uses qemu_host_page_size/qemu_host_page_mask which initialized
for TCG only.
This moves qemu_host_page_size/qemu_host_page_mask initialization from
TCG's page_init() and adds a call for it from kvm_init().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
QEMU does not need and should not allocate memory for the ROM of a
passthrough PCI device. So this patch initialize the particular region
like any other PCI BAR of a passthrough device.
When a guest will access the ROM, Xen will take care of the IO, QEMU
will not be involved in it.
Xen set a limit of memory available for each guest, allocating memory
for a ROM can hit this limit.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The framebuffer is needlessly mapped (PROT_READ | PROT_WRITE), map it
PROT_READ instead.
The framebuffer is unmapped by replacing the framebuffer pages with
anonymous shared memory, calling mmap. Check for return errors and print
a warning.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit d32934c84c.
The original implementation before this patch makes abortive error
messages much more friendly. The underlying bug that required this
change is now fixed. Revert.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The recent addition of util/error.c's dependency on error_report()
causes this test to fail to link due to a number of missing monitor
related symbols. All these symbols are however defined by libqemustub.
Add this libary to the link.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The vfio-pci initfn will currently succeed even if DMA mappings fail.
A typical reason for failure is if the user does not have sufficient
privilege to lock all the memory for the guest. In this case, the
device gets attached, but can only access a portion of guest memory
and is extremely unlikely to work.
DMA mappings are done via a MemoryListener, which provides no direct
error return path. We therefore stuff the errno into our container
structure and check for error after registration completes. We can
also test for mapping errors during runtime, but our only option for
resolution at that point is to kill the guest with a hw_error.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since 57271d63 we now see spurious mappings with the upper bits set
if 64bit PCI BARs are sized while enabled. The guest writes a mask
of 0xffffffff to the lower BAR to size it, then restores it, then
writes the same mask to the upper BAR resulting in a spurious BAR
mapping into the last 4G of the 64bit address space. Most
architectures do not support or make use of the full 64bits address
space for PCI BARs, so we filter out mappings with the high bit set.
Long term, we probably need to think about vfio telling us the
address width limitations of the IOMMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
SeaBIOS waits for LUN0 to respond to the TEST UNIT READY command
in order to decide whether it should part of the boot sequence.
If LUN0 does not respond to the command, boot is delayed by up
to 5 seconds. This currently happens when there is no LUN0 on
a target. Fix that by adding a trivial implementation of the
command.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set SelectiveSuspendEnabled registy entry to one.
This makes Windows use remote suspend by default,
without manual registry fiddeling.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
BIOS files are not directly executable, so they don't need this flag.
All other BIOS files don't use the execute flag.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
addrlen parameter of recvfrom() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes addrlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
optlen parameter of getsockopt() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes optlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It was broken by 4ce6243dc6,
where TARGET_CLONE_BACKWARDS was specified instead of
TARGET_CLONE_BACKWARDS2.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This notably fix IDE CD probing on the Plan 9 operating system,
which rely on the error register set by the Execute Device
Diagnostic command to detect drive configurations.
Thanks to Rémi Pommarel for reporting this issue.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cpu_physical_memory_set_dirty_lebitmap calls getpageaddr and ffsl which are
unavailable for MinGW. As the function is unused for MinGW, it can simply
be excluded from compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The default machine-type (pc-i440fx-2.0) now requires bios-256k.bin, but
"make install" isn't installing it, so qemu-system-x86_64 won't run out
of the box. Add it to BLOBS so it gets installed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
During lazy rom loading, if rom read fails, and the
guest attempts a read again, vfio will again attempt it.
Add a boolean to prevent this. There could be a case where
a failed rom read might succeed the next time because of
a device reset or such, but it's best to exclude unpredictable
behavior
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the device rom can't be read, report an error to the
user. This alerts the user that the device has a bad
state that is causing rom read failure or option rom
loading has been disabled from the device boot menu
(among other reasons).
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Somehow this has been lurking for a while; we remove our subregions
from the base BAR and VGA region mappings, but we don't destroy them,
creating a leak and more serious problems when we try to migrate after
removing these devices. Add the trivial bit of final cleanup to
remove these entirely.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The @addr here is a guest physical address and can easily be bigger
than 4G.
This changes uint32_t to hwaddr.
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upstreaming this change from Android (https://android-review.googlesource.com/54211).
On heavily loaded machines with many VM instances we see KVM_CREATE_VM
failing with EINTR on this path:
kvm_dev_ioctl_create_vm -> kvm_create_vm -> kvm_init_mmu_notifier -> mmu_notifier_register -> do_mmu_notifier_register -> mm_take_all_locks
which checks if any signals have been raised while it was attaining locks
and returns EINTR. Retrying the system call greatly improves reliability.
Cc: qemu-stable@nongnu.org
Signed-off-by: thomas knych <thomaswk@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To suppport reopen(), the .bdrv_reopen_prepare() stub must exist.
iSCSI does not have anything that needs to be done to support reopen,
so we can just implement the _prepare() stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, an unplug can cause events to be dropped, which
leads to an assertion failure when preparing to notify the guest
kernel.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is still a small window that occurs when a cancel I/O affects
an asynchronous I/O operation that hasn't started. In other words,
when the residual data length equals the expected data length.
Today, the routine virtio_scsi_command_complete fails because the
VirtIOSCSIReq pointer (from the hba_private field in SCSIRequest)
was cleared earlier when virtio_scsi_complete_req was called by
the virtio_scsi_request_cancelled routine. As a result, the
virtio_scsi_command_complete routine needs to simply return when
it is processing a SCSIRequest block that was marked canceled.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some emulated disk operations (MODE SELECT, UNMAP, WRITE SAME)
can trigger asynchronous I/Os. Provide the cancel_io callback
to ensure that AIOCBs are properly cleaned up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
[Tweak commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synchronize the program counter before the power down helper call
otherwise interrupts will return to the wrong context.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This patch uses inbound GPIO lines (IRQ and FIR) for
interrupts instead of using the old pic_cpu method,
which doesn't correspond to real hardware.
This creates the CPU's inbound IRQ and FIR GPIO lines and
updates the Microblaze boards to use this new method.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reveiwed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Switch the ARMCPUInfo arrays in cpu.c and cpu64.c to use a terminator
entry rather than looping based on ARRAY_SIZE. The latter causes
compile warnings on some versions of gcc if the configure options
happen to result in an empty array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T0a8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'quintela/tags/migration/20140113' into staging
migration.next for 20140113
# gpg: Signature made Mon 13 Jan 2014 09:38:27 AM PST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* quintela/tags/migration/20140113: (49 commits)
migration: synchronize memory bitmap 64bits at a time
ram: split function that synchronizes a range
memory: syncronize kvm bitmap using bitmaps operations
memory: move bitmap synchronization to its own function
kvm: refactor start address calculation
kvm: use directly cpu_physical_memory_* api for tracking dirty pages
memory: unfold memory_region_test_and_clear()
memory: split cpu_physical_memory_* functions to its own include
memory: cpu_physical_memory_set_dirty_tracking() should return void
memory: make cpu_physical_memory_reset_dirty() take a length parameter
memory: s/dirty/clean/ in cpu_physical_memory_is_dirty()
memory: cpu_physical_memory_clear_dirty_range() now uses bitmap operations
memory: cpu_physical_memory_set_dirty_range() now uses bitmap operations
memory: use find_next_bit() to find dirty bits
memory: s/mask/clear/ cpu_physical_memory_mask_dirty_range
memory: cpu_physical_memory_get_dirty() is used as returning a bool
memory: make cpu_physical_memory_get_dirty() the main function
memory: unfold cpu_physical_memory_set_dirty_flag()
memory: unfold cpu_physical_memory_set_dirty() in its only user
memory: unfold cpu_physical_memory_clear_dirty_flag() in its only user
...
Message-id: 1389634834-24181-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We use the old code if the bitmaps are not aligned
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This function is the only bit where we care about speed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
If bitmaps are aligned properly, use bitmap operations. If they are
not, just use old bit at a time code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
We want to have all the functions that handle directly the dirty
bitmap near. We will change it later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Performance is important in this function, and we want to optimize even further.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
