The logic in this code obviously predates the multiple monitor
capability of qemu and looks increasingly silly these days.
I think the intention of this piece of code is to get a reasonable
default for the -nographic case: have monitor and serial line muxed
on stdio.
With the new default_serial and default_monitor variables we have now
doing just that became much easier ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch makes the monitor default device configuration work like the
default serial and parallel port devices. It adds a variable
default_monitor which says whenever a default monitor should be added.
It is enabled by default. It is cleared when qemu finds '-monitor' on
the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Qemu creates a default parallel port for you in case you didn't specify
one on the command line. Right now this is tied to the '-parallel
<chardev>' command line switch, which in turn causes trouble if you are
creating your parallel port via '-device isa-parallel,<props>'.
This patch adds a variable default_parallel which says whenever a default
parallel port should be added. It is enabled by default. It is cleared
when qemu finds '-parallel' or '-device isa-parallel' on the command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Qemu creates a default serial line for you in case you didn't specify
one on the command line. Right now this is tied to the '-serial
<chardev>' command line switch, which in turn causes trouble if you are
creating your serial line via '-device isa-serial,<props>'.
This patch adds a variable default_serial which says whenever a default
serial line should be added. It is enabled by default. It is cleared
when qemu finds '-serial' or '-device isa-serial' on the command line.
Part of the patch is some infrastructure for the '-device $driver'
checking (default_driver_check function) which will also be used by the
other patches of this series.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the 'vc' chardev backend print a title line with the chardev name
after initialization, using CharDriverState->label.
This replaces the banner printing code in vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The patch decuples the -chardev switch and the actual chardev
initialization. Without this patch qemu ignores chardev entries
coming via -readconfig.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds infrastructure and command line option for setting
global defaults for device properties, i.e. you can for example use
-global virtio-blk-pci.vectors=0
to turn off msi by default for all virtio block devices. The config
file syntax is:
[global]
driver = "virtio-blk-pci"
property = "vectors"
value = "0"
This can also be used to set properties for devices which are not
created via -device but implicitly via machine init, i.e.
-global isa-fdc,driveA=<name>
This patch uses the mechanism which configures properties for the
compatibility machine types (pc-0.10 & friends). The command line
takes precedence over the machine type values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch renames the compat properties into global properties and
makes them more generic. The compatibility stuff is only one of
multiple possible users now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All "normal" system emulation targets in qemu I'm aware of display output
on either VGA or serial output.
Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.
I'm not particularly proud of this patch. It would be a lot better to
have something in the machine description that tells us about the default
terminal.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Either rename variables and functions to refer to write errors (which is what
they actually do) or introduce a parameter to distinguish reads and writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rerror controls the action to be taken when an error occurs while accessing the
guest image file. It corresponds to werror which already controls the action
take for write errors.
This purely introduces parsing rerror command line option into the right
structures, real support for it in the device emulation is added in the
following patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Either rename variables and functions to refer to write errors (which is what
they actually do) or introduce a parameter to distinguish reads and writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As we may do more than one migration (cancellation, live backup), reset
bytes_transferred on stage 1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to allow proper progress reporting to the monitor that
initiated the migration, forward the monitor reference through the
migration layer down to SaveLiveStateHandler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a
live migration. This gives the involved subsystems a chance to clean up
dynamically allocated resources. Namely, the block migration layer can
now free its device descriptors and pending blocks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Besides catching real errors, this also allows to interrrupt the qemu
process during restore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Debug, shutdown, reset, powerdown and stop are all basic events,
as they are very simple they can be added in the same commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds a flag called 'control' to the '-monitor'
command-line option. This flag enables control mode.
The syntax is:
qemu [...] -monitor control,<device>
Where <device> is a chardev (excluding 'vc', for obvious reasons).
For example:
$ qemu [...] -monitor control,tcp:localhost:4444,server
Will run QEMU in control mode, waiting for a client TCP connection
on localhost port 4444.
NOTE: I've tried using QemuOpts for this, but turns out that it
will try to parse the device part, which should be untouched.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no reason to have it disabled on this platform.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch introduces block migration called during live migration. Block
are being copied to the destination in an async way. First the code will
transfer the whole disk and then transfer all dirty blocks accumulted during
the migration.
Still need to improve transition from the iterative phase of migration to the
end phase. For now transition will take place when all blocks transfered once,
all the dirty blocks will be transfered during the end phase (guest is
suspended).
Changes from v4:
- Global variabels moved to a global state structure allocated dynamically.
- Minor coding style issues.
- Poll block.c for tracking of dirty blocks instead of manage it here.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The initial_reset sent to chardevs doesn't do much other than setting
a bool to true. Char devices are interested in the open event and
that gets sent whenever the device is opened.
Moreover, the reset logic breaks as and when qemu's bh scheduling
changes.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adds -readconfig and -writeconfig command line switches to read/write
QemuOpts from config file.
In theory you should be able to do:
qemu < machine config cmd line switches here > -writeconfig vm.cfg
qemu -readconfig vm.cfg
In practice it will not work. Not all command line switches are
converted to QemuOpts, so you'll have to keep the not-yet converted ones
on the second line. Also there might be bugs lurking which prevent even
the converted ones from working correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have code for a quite a few block formats. While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.
This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats. Other programs, like qemu-img, are
not affected.
Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same. Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a slightly revised patch for adding readonly flag to the -drive command.
Even though this patch is "stand-alone", it assumes a previous related patch (in Anthony staging tree), that passes
the readonly attribute of the drive to the guest OS, applied first.
This enables sharing same image between guests, with readonly access.
Implementaion mark the drive as read_only and changes the flags when actually opening the file.
The readonly attribute of a qcow also passed to it's base file.
For ide that cannot pass the readonly attribute to the guest OS, disallow the readonly flag.
Also, return error code from bdrv_truncate for readonly drive.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.
Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running
I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.
[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hook up usb_msd_init.
Also rework handling of encrypted block devices,
move the code out vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.
The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name. When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Looks like these are just artifacts of vl.c being split up.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Same as for -net except for:
- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required
Patchworks-ID: 35517
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this, kvm will hold the mutex while it issues its run ioctl,
and never be able to step out of it, causing a deadlock.
Patchworks-ID: 35359
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().
There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.
Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need net_client_init_from_opts() exported for this
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu_opts_parse() gives a suitable error message in all failure cases
so we can remove the error message from the caller.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Propagating errors up the call chain is tedious. In startup code, we
can take a shortcut: terminate the program. This is wrong elsewhere,
the monitor in particular.
config_error() tries to cater for both customers: it terminates the
program unless its mon parameter tells it it's working for the
monitor.
Its users need to return status anyway (unless passing a null mon
argument, which none do), which their users need to check. So this
automatic exit buys us exactly nothing useful. Only the dangerous
delusion that we can get away without returning status. Some of its
users fell for that. Their callers continue executing after failure
when working for the monitor.
This bites monitor command host_net_add in two places:
* net_slirp_init() continues after slirp_hostfwd(), slirp_guestfwd(),
or slirp_smb() failed, and may end up reporting success. This
happens for "host_net_add user guestfwd=foo": it complains about the
invalid guest forwarding rule, then happily creates the user network
without guest forwarding.
* net_client_init() can't detect slirp_guestfwd() failure, and gets
fooled by net_slirp_init() lying about success. Suppresses its
"Could not initialize device" message.
Add the missing error reporting, make sure errors are checked, and
drop the exit() from config_error().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for -ctrl-grab to use the right-ctrl button to grab/release
the mouse in SDL.
The multi-button ctrl-alt and ctrl-alt-shift grab buttons present an
accessibility problem to users who cannot press more than one button
at a time.
https://bugs.edge.launchpad.net/ubuntu/+source/qemu-kvm/+bug/237635
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds infrastructure to maintain memory regions which must be
restored on reset. That includes roms (vga bios and option roms on pc),
but is also used when loading linux kernels directly. Features:
- loading files is supported.
- passing blobs is supported.
- target address range is supported (for optionrom area).
- fixed target memory address is supported (linux kernel).
New in v2:
- writes to ROM are done only at initial boot.
- also handle aout and uimage loaders.
- drop unused fread_targphys() function.
The final memory layout is created once all memory regions are
registered. The option roms get addresses assigned and the
registered regions are checked against overlaps. Finally all data
is copyed to the guest memory.
Advantages:
(1) Filling memory on initial boot and on reset takes the same
code path, making reset more robust.
(2) The need to keep track of the option rom load address is gone.
(3) Due to (2) option roms can be loaded outside pc_init(). This
allows to move the pxe rom loading into the nic drivers for
example.
Additional bonus: There is a 'info roms' monitor command now.
The patch also switches over pc.c and removes the
option_rom_setup_reset() and load_option_rom() functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
By making the error reporting include strerror(errno), it gives the user
a bit more indication as to why qemu failed. This is particularly
important for people running qemu as a non root user.
Signed-off-by: Justin M. Forbes <jforbes@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes:
* drive_uninit() wants a DriveInfo now.
* drive_uninit() also calls bdrv_delete(),
so callers don't need to do that.
* drive_uninit() calls are moved over to the ->exit()
callbacks, destroy_bdrvs() is zapped.
* setting bdrv->private is not needed any more as the
only user (destroy_bdrvs) is gone.
* usb-storage needs no drive_uninit, scsi-disk will
handle that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adds device_add and device_del commands. device_add accepts accepts
the same syntax like the -device command line switch. device_del
expects a device id. So you should tag your devices with ids if you
want to remove them later on, like this:
device_add pci-ohci,id=ohci
device_del ohci
Unplugging via pci_del or usb_del works too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Switch RTC emulations to the new host_clock instead of vm_clock by
default. This has the advantage that the emulated RTC will follow
automatically the host time while it might be tuned via NTP. vm_clock
can still be selected by passing '-rtc clock=vm' on the command line.
Note that some RTC emulations (at least M48T59) already use the host
time unconditionally while others (namely MC146818) do not. This patch
introduces the required infrastructure for selecting the base clock but
only converts MC146818 for now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new
unified command line switch:
-rtc [base=utc|localtime|date][,driftfix=none|slew]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Despite its name QEMU_CLOCK_REALTIME is (normally) not using
CLOCK_REALTIME / the host system time as base. In order to allow also
non-trivial RTC emulations (MC146818) to follow the host time instead of
the virtual guest time, introduce the new clock type QEMU_CLOCK_HOST. It
is unconditionally based on CLOCK_REALTIME, thus will follow system time
changes of the host.
The only limitation of its current implementation is that pending
host_clock timers may not fire early if the host time is pushed forward
beyond their expiry. So far no urgent need to overcome this limitation
was identified, so it's left as simple as it is (expiry on next alarm
timer tick).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
nearest_delta_us is calculated but not used. Drop it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These constants select clocks, not timers. And init_timers initializes
clocks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, our check for qemu_cpu_self only checks if there is a cpu
currently in execution (represented by cpu_single_env being set). While
this might be okay for tcg, it is certainly not okay for kvm, since multiple
cpus might be executing.
Instead, I propose we use pthread primitives to test if the caller thread is
the same as env->thread.
For tcg, it will have the same semantics as before, since all CPUStates will
point to the same thread, and we'll only have one in execution at a time.
Signed-off-by: Glauber Costa <glommer@mothafucka.localdomain>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenSolaris headers can't export madvise() with a sane set of #defines.
For background, see MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156)
for discussion about Solaris header problems.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace:
if (-1 == foo())
with:
if (foo() == -1)
While this coding style is not in direct contravention of our currently
ratified CODING_STYLE treaty, it could be argued that the Article 3 of
the European Convention on Human Rights (prohibiting torture and "inhuman
or degrading treatment") reads on the matter.
[This commit message was brought to you without humour, as is evidenced
by the absence of any emoticons]
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that labels must be unique, the chr devices can't be opened anymore
within the serial port code (in case they are not already opened in
vl.c), as they end up with the same label. Instead opened so
non-assigned one directly in vl.c, with a different label.
This make MIPS Malta board emulation working again.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ticks_per_sec is a constant. There's no need to store it as a variable as it
never changes since our time is based on units.
Convert get_ticks_per_sec() to a static inline and move the constant into
qemu-timer.h. Remove all references to QEMU_TIMER_BASE so that we consistently
use this interface.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
loadvm_state is called from: vl.c during startup, vmstart() is called after finishing loading. The other caller do_loadvm() does the call after a vm_stop(). At both places where we can be saving state we are stoped a few lines before
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It don't work. It fails in this check
if (qemu_get_be32(f) != last_ram_offset)
With 512MB of ram, values were for me:
v = 20c00000 last_ram_offset = 20840000
Last time that some code changed that was this one.
commit 94a6b54fd6
Implement dynamic guest ram allocation.
(I.e. it has been broken since at least April)
Going back to the previous commit, ram load correctly, but vga screen gets
corrupted and ide don't load correctly. At this point I decide that removing
support is the only viable thing.
The last user of the ram_compress_* were RAM_SAVE_FLAG_FULL flag, but
that flag was never ever been stored in an image. Mark the flag obsolete
and remove the functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
start switching chardevs to QemuOpts. This patch adds the
infrastructure and converts the null device.
The patch brings two new functions:
qemu_chr_open_opts()
same as qemu_chr_open(), but uses QemuOpts instead of a
option char string.
qemu_chr_parse_compat()
accepts a traditional chardev option string, returns the
corresponding QemuOpts instance, to handle backward
compatibility.
The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:
-chardev null,id=test
This uses the new qemu_chr_open_opts. Thus with this patch alone only
the null device works. The other devices will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Doing this will make the vcpu ioctl be issued from the I/O thread, instead
of cpu thread. The correct behaviour is to call it from within the cpu thread,
as soon as we are ready to go.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-kvm: fix segfault when running kvm without /dev/kvm, falling back
to non-accelerated mode
We're seeing segfaults on systems without access to /dev/kvm. It
looks like the global kvm_allowed is being set just a little too late
in vl.c. This patch moves the kvm initialization a bit higher in the
vl.c main, just after options processing, and solves the segfaults.
We're carrying this patch in Ubuntu 9.10 Alpha. Please apply
upstream, or advise if and why this might not be the optimal solution.
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Move the kvm_init() call a bit higher to fix a segfault when
/dev/kvm is not available. The kvm_allowed global needs
to be set correctly a little earlier.
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are few places in vl.c not using the qemu version of
malloc/free/strdup.
Fix it.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vl.c will not link if CONFIG_KVM is not defined.
This patch fixes the problem.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PATH_MAX is used elsewhere in the qemu source tree without protection.
In addtion the actual code would not compile if PATH_MAX is not defined
Last the free() call is wrong as p is not malloc()ed.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rebased version of Anthony's patch: Allow to specify more than one
monitor terminal via the -monitor command line switch. This is
particularly useful when libvirt or some other management tool already
occupies the primary monitor but you need another one for debugging.
The current clumsy workaround is to multiplex such additional terminals
over a qemu character device (e.g. -serial mon:<device>).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Documentation/kvm/api.txt, (and well, to common sense),
we should not be calling vcpu ioctls from within the iothread.
Since vcpu initialization issues a vcpu ioctl, move it a little bit
further in time to prevent it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we are using --serial telnet:0:5555,server or similar, ^C will not
kill qemu. We need to first connect using telnet, and the the ^C takes
effect.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With that patch applied "-balloon virtio,args" becomes a shortcut for
"-device virtio-balloon-pci,args".
Side effects:
- ballon device gains support for id=<tag>.
- ballon device is off by default now.
- initialization order changes, which may in different pci slot
assignment depending on the VM configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some functions for error reporting to address the
problem that error messages should be routed to different destinations
depending on the context of the caller, i.e. monitor command errors
should go to the monitor, command line errors to stderr.
qemu_error() is a printf-like function to report errors.
qemu_errors_to_file() and qemu_errors_to_mon() switch the destination
for the error message to the specified file or monitor. When setting a
new destination the old one will be kept. One can switch back using
qemu_errors_to_previous(). i.e. it works like a stack.
main() calls qemu_errors_to_file(stderr), so errors go to stderr by
default. monitor callbacks are wrapped into qemu_errors_to_mon() +
qemu_errors_to_previous(), so any errors triggered by monitor commands
will go to the monitor.
Each thread has its own error message destination. qemu-kvm probably
should add a qemu_errors_to_file(stderr) call to the i/o-thread
initialization code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-watchdog NAME is now equivalent to -device NAME, except it treats
option argument '?' specially, and supports only one watchdog.
A side effect is that a device created with -watchdog may now receive
a different PCI address.
i6300esb is now available on any machine with a PCI bus, not just PCs.
ib700 is still PC only, but that could be changed easily.
The only remaining use of struct WatchdogTimerModel and
watchdog_add_model() is supporting '-watchdog ?'. Should be replaced
by searching device_info_list for watchdog devices when we can
identify them there.
Also fixes ib700 not to use vm_clock before it is initialized: in
wdt_ib700_init(), called from register_watchdogs(), which runs before
init_timers(). The bug made ib700_write_enable_reg() crash in
qemu_del_timer().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_loadvm() is now called from the monitor.
load_vmstate() is called by do_loadvm() and when -loadvm command line is used.
Command line don't have to play games with vmstop()/vmstart()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For injecting multi-core and multi-threading CPU topology into guests
extend the -smp syntax to accommodate cores and threads specification.
Syntax: -smp smp_value[,cores=nr_cores][,threads=nr_threads]\
[,socket=nr_sockets][,maxcpus=max_cpus]
smp_value is the legacy value specifying the total number of vCPUs for
the guest. If you specify one of cores, threads or sockets this value
can be omitted. Missing values will be computed to fulfill:
smp_value = nr_cores * nr_threads * nr_sockets
where it will favour sockets over cores over threads (to mimic the
current behavior, which will only inject multiple sockets.)
So -smp 4,threads=2 will inject two sockets with 2 threads each,
-smp cores=4 is an abbreviation for -smp 4,cores=4,threads=1,sockets=1.
If max_cpus (the number of hotpluggable CPUs) is omitted, it will
be set to smp_value.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi,
After discussing the issue with Avi, Gleb and a couple others on irq,
we came to the conclusion that it is preferred to have QEMU request
features from the BIOS, rather than notifying the BIOS that it is
running on QEMU or KVM. This way memory ranges can change etc. and
an older BIOS will continue to work on newer QEMU if it receives the
info as a fw_cfg value.
This one also matches what qemu-kvm does for irq0override, except I
haven't made it configurable. I leave that as an exercise for whoever
would be interested in switching off irq0override.
Thanks,
Jes
Set irq0 override in fw_cfg, informing the BIOS that QEMU expects
override on irq0. This matches qemu-kvm, and will help sharing a
single BIOS binary.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the user does not want autostart, they can specify -S.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Depending on what glibc/kernel headers you are compiling against,
PR_SET_NAME may or may not be defined. Do the right thing if
PR_SET_NAME isn't defined and skip setting the process name.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch introduces dynamic timer intervals: we slow down the refresh
rate when there in no much activity but we get back to a fast refresh
rate when the activity resume.
Please note that qemu_timer_expired is not an inline function any more
because I needed to call it from vnc.c however I don't think this change
should have any serious consequence.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
First user of the new drive property. With this patch applied host
and guest config can be specified separately, like this:
-drive if=none,id=disk1,file=/path/to/disk.img
-device virtio-blk-pci,drive=disk1
You can set any property for virtio-blk-pci now. You can set the pci
address via addr=. You can switch the device into 0.10 compat mode
using class=0x0180. As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.
Old syntax continues to work. Internally it does the same as the two
lines above though. One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.
Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:
-drive if=none,id=sda,file=/path/to/disk.img
-device lsi,id=lsi,addr=<pciaddr>
-device scsi-disk,drive=sda,bus=lsi.0,lun=<n>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This adds a host drive, but doesn't implicitly add a guest drive for it.
First step in splitting host and guest configuration, check the
following patches to see how this can be used ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.
New: "-set device.$id.$property=$value" works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
One use case will be file for drives (no filename quoting issues), i.e.
-drive id=test,if=virtio
-set drive.test.file=/vmdisk/test-virtio.img
It will work for any other option (assuming handled by QemuOpts) though.
Except for id= for obvious reasons ;).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Since migration returns right away, starting the VM right
after calling qemu_start_incoming_migration is wrong even
if -S is not passed. We have to do this after migration
has completed.
Cc: Glauber Costa <glommer@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Win32 the setvbuf function requires the last parameter to be size between 2 and INT_MAX bytes, so the calls always failed. Since the whole point of the calls is to set line-buffered mode for the file handle and that's not supported on Win32 anyway, conditionally remove them.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While fixing migration with -S, commit
89befdd1a6 broke the rest of us. Poor
glommer, with a poor family, spare him his life from this monstruosity.
Since the unconditional vm_start, not autostart was the villain, I'm putting
back autostart. Let me know if you prefer other solutions, it doesn't really matter,
doesn't really matter to me.
Any way the wind blows...
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Follow on patch will use it to determine the size of the MADT and
other BIOS tables.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Demo QemuOpts in action ;)
Implementing a alternative way to specify the filename should be
just a few lines of code now once we decided how the cmd line syntax
should look like.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cleanup pretty simliar to the drives_table removal patch:
- drop the table and make a linked list out of it.
- pass around struct pointers instead of table indices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-drive accepts the new id= now, allowing to explicitely name your
drives. They will show up with that name in "info block" if specified,
otherwise the existing namimg scheme is used to autogenerate one.
There is also a new function to lookup drives by name. Not used yet.
The plan is to link disk drivers and drives using the drive id instead
of passing around pointers to BlockDriveState.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
First step cleaning up the drives handling. This one does nothing but
removing drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index. This needs adaption in
*tons* of places all over.
The drives are now maintained as linked list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The -device switch is the users frontend to the qdev_device_add function
added by the previous patch.
Also adds a linked list where command line options can be saved.
Use it for the new -device and for the -usbdevice and -bt switches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an 'alias' field to QEMUMachine and display it in the output of
'qemu -M ?' with an '(aliased to foo)' suffix.
Aliases can change targets in newer versions of qemu, so management tools
may choose canonicalize machine types to ensure that if a user chooses an
alias, that the actual machine type used will remain compatible in
future.
This is intended to mimic a symlink to a machine description file.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The header sys-queue.h must be #included early, otherwise at some point OS
queue macros will be used. On OpenBSD, those don't define TAILQ_FOREACH_SAFE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This add support for switching devices into a compatibility mode
using device properties. Machine types can have a list of properties
for specific devices attached to allow the easy creation of machine
types compatible to older qemu versions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-S is not honored by qemu on incoming migration. If a domain is migrated
while paused, thus, it will start running on the remote machine; this
is wrong.
Given the trivial patch to fix this, it looks more like a thinko
than anything else, probably dating back to the qemu-kvm merge.
The interesting part is that the -S mechanism was in fact *used* when
migrating (setting autostart = 0) and the incoming migration code was
starting the VM at the end of the migration.
Since I was removing the vm_start from there, I also corrected a related
imprecision. The code was doing a vm_stop "just in case", but we can
be sure that the VM is not running---the vm_start call in vl.c has not
been reached yet. So the vm_stop is removed together with the vm_start.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Disable the lengthy BIOS prompt for selecting a boot device by default,
but let the user reenable it via '-boot menu=on'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to specify an exceptional boot order only for the first
startup of the guest. After reboot, qemu will switch back to the default
order (or what was specified via 'order='). Makes installing from CD
images and then booting the freshly set up harddisk more handy.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Will be used by '-boot once=...', and should also help in other use
cases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Convert the reset handler maintenance code to TAILQ services.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move registration function for the boot_set callback handler and provide
qemu_boot_set so that it can also be used outside the monitor code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch changes the boot command line option to the canonical format
-boot [order=drives][,...]
where 'drives' is using the same format as the old -boot. The format
switch allows to add the 'menu' and 'once' options in later patches. The
old format is still understood and will be processed at least for a
transition time.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Set the Linux process name to the name argument specified with name. I find
this useful to see which guests are taking CPU time in top.
This doesn't affect ps, which checks argv[0], but rewriting the
environment uses much more code, so I only used this simple way.
v2: Use separate process= argument, no prefixes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We want to do (at least) two things to the virtio-balloon device:
suppress it, and control its PCI address. Option -no-virtio-balloon
lets us do only the former. To get the latter, replace
-no-virtio-balloon with
-balloon none disable balloon device
-balloon virtio[,addr=str]
enable virtio balloon device (default)
Syntax suggested by Anthony Liguori.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
During startup and after reset we have to synchronize user space to the
in-kernel KVM state. Namely, we need to transfer the VCPU registers when
they change due to VCPU as well as APIC reset.
This patch refactors the required hooks so that kvm_init_vcpu registers
its own per-VCPU reset handler and adds a cpu_synchronize_state to the
APIC reset. That way we no longer depend on the new reset order (and can
drop this disliked interface again) and we can even drop a KVM hook in
main().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
