Commit Graph

16968 Commits

Author SHA1 Message Date
Harsh Prateek Bora
2583e44367 hw/9pfs: Replace rwlocks with RCU variants of interfaces.
Use QLIST_INSERT_HEAD_RCU and rcu_read_lock/unlock instead of rwlocks.
Use v9fs_synth_mutex as a write-only mutex to handle concurrent writers.

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:18 +05:30
Harsh Prateek Bora
5f7d05ecfd qemu-queue: Introduce QLIST_INSERT_HEAD_RCU and dummy RCU wrappers.
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not
re-ordered and therefore avoiding a crash. There may be parallel readers which
should be allowed for lock-free access and this variant allows us to get rid
of rwlocks used by readers.

SynthFS is a special case where we dont really need full RCU capabilities as
it doesnt allow list entry deletion but concurrent readers/writers and
instruction re-ordering should not result in a crash.

Also, once the real rcu is available, dummy rcu macro definitions will go away
and the code will still work as expected.

This patchwork is based on inputs from Paolo Bonzini.

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:18 +05:30
Aneesh Kumar K.V
9db221ae73 hw/9pfs: Add synthetic file system support using 9p
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line

mount -t 9p -oversion=9p2000.L,trans=virtio v_synth  <mountpint>

Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below

    qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
    qemu_v9fs_synth_add_file(node, 0777, "testfile",
                             my_test_read, NULL, NULL);

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:18 +05:30
Aneesh Kumar K.V
cc720ddb54 hw/9pfs: Abstract open state of fid to V9fsFidOpenState
To implement synthetic file system in Qemu we may not really
require file descriptor and Dir *. Make generic code use
V9fsFidOpenState instead.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:17 +05:30
M. Mohan Kumar
2c74c2cb4b hw/9pfs: Read-only support for 9p export
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:17 +05:30
M. Mohan Kumar
f02b77c9bf qemu: Add opt_set_bool functionality
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:16 +05:30
Aneesh Kumar K.V
15329e8338 configure: Update configure so that open_by_handle_at check returns correct value
According to David Gibson for some compiler/libc combinations, open_by_handle_at
test in configure isn't quite right: because the file_handle pointer is never
dereferenced, gcc doesn't complain even if it is undefined. Change the test
as suggested by him.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:15 +05:30
Aneesh Kumar K.V
17b1971f63 hw/9pfs: Fix error handling in local_mknod
Update local_chown to remove unnecessary if loop

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31 12:34:15 +05:30
Max Filippov
375847a6c0 MAINTAINERS: update wiki URL and machine names for target-xtensa
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 10:58:08 +00:00
Richard Henderson
df072774cb tcg: Optimize some forms of deposit.
If the deposit replaces the entire word, optimize to a move.

If we're inserting to the top of the word, avoid the mask of arg2
as we'll be shifting out all of the garbage and shifting in zeros.

If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit
when possible.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:06:23 +00:00
Aneesh Kumar K.V
7999f7e127 hw/9pfs: Make VirtFS tracing work correctly
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:05:28 +00:00
Stefan Weil
c2f36c6ce7 exec-all: Fix void pointer arithmetic
Adding an offset to a void pointer works with gcc but is not allowed
by the current C standards. With -pedantic, gcc complains:

exec-all.h:344: error: pointer of type ‘void *’ used in arithmetic

Fix this, and also replace (unsigned long) by (uintptr_t) in the same
statement.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:05:00 +00:00
David Gibson
d787fcf45f Add linux-headers/asm to .gitignore
linux-headers/asm is a symlink generated during configure.  It should not,
therefore be committed to git, nor show up in git diffs and the like.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30 09:03:55 +00:00
Blue Swirl
b5a12aa204 Merge branch 'rth/vis2' of git://repo.or.cz/qemu/rth
* 'rth/vis2' of git://repo.or.cz/qemu/rth:
  target-sparc: Implement FALIGNDATA inline.
  target-sparc: Implement BMASK/BSHUFFLE.
  target-sparc: Implement ALIGNADDR* inline.
  target-sparc: Implement EDGE* instructions.
  target-sparc: Implement fpack{16,32,fix}.
  target-sparc: Implement PDIST.
  target-sparc: Do exceptions management fully inside the helpers.
  target-sparc: Change fpr representation to doubles.
  target-sparc: Undo cpu_fpr rename.
  target-sparc: Extract float128 move to a function.
  target-sparc: Extract common code for floating-point operations.
  target-sparc: Make FPU/VIS helpers const when possible.
  target-sparc: Pass float64 parameters instead of dt0/1 temporaries.
  target-sparc: Add accessors for double-precision fpr access.
  target-sparc: Mark fprs dirty in store accessor.
  target-sparc: Add accessors for single-precision fpr access.
2011-10-27 20:27:07 +00:00
Andrzej Zaborowski
9f60639b84 Merge branch 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm 2011-10-27 01:02:46 +02:00
Richard Henderson
50c796f9d8 target-sparc: Implement FALIGNDATA inline.
This is a relatively simple sequence of shifts.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 14:00:19 -07:00
Richard Henderson
793a137a41 target-sparc: Implement BMASK/BSHUFFLE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 14:00:19 -07:00
Richard Henderson
add545ab11 target-sparc: Implement ALIGNADDR* inline.
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all.  However, this is a very simple operation
so we're better off doing this inline.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 14:00:19 -07:00
Richard Henderson
6c07355325 target-sparc: Implement EDGE* instructions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 14:00:19 -07:00
Richard Henderson
2dedf31497 target-sparc: Implement fpack{16,32,fix}.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 14:00:17 -07:00
Richard Henderson
f888300b81 target-sparc: Implement PDIST.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:58:48 -07:00
Richard Henderson
445167723d target-sparc: Do exceptions management fully inside the helpers.
This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three.  In
addition, clear_float_exceptions expands inline to a single byte store.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:57:06 -07:00
Richard Henderson
30038fd818 target-sparc: Change fpr representation to doubles.
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:55:26 -07:00
Richard Henderson
45c7b743cd target-sparc: Undo cpu_fpr rename.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:55:26 -07:00
Richard Henderson
ac11f7767f target-sparc: Extract float128 move to a function.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:55:26 -07:00
Richard Henderson
61f17f6eba target-sparc: Extract common code for floating-point operations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:55:24 -07:00
Richard Henderson
f027c3b192 target-sparc: Make FPU/VIS helpers const when possible.
This also removes the unused ENV parameter from these helpers.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:50:45 -07:00
Richard Henderson
03fb8cfc63 target-sparc: Pass float64 parameters instead of dt0/1 temporaries.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:50:45 -07:00
Richard Henderson
96eda02412 target-sparc: Add accessors for double-precision fpr access.
Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:50:45 -07:00
Richard Henderson
141ae5c13f target-sparc: Mark fprs dirty in store accessor.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:50:45 -07:00
Richard Henderson
208ae65722 target-sparc: Add accessors for single-precision fpr access.
Load, store, and "create destination".  This version attempts to
change the behaviour of the translator as little as possible.  We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that.  This will eventually allow a change in
representation of the fprs.

Change the name of the cpu_fpr array to make certain that all
instances are converted.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:50:42 -07:00
Blue Swirl
fafd8bceb5 Sparc: split load and store op helpers
Move load and store op helpers top ldst_helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:19:20 +00:00
Blue Swirl
870be6ad57 Sparc: convert win_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:19:18 +00:00
Blue Swirl
11e66bca8a Sparc: convert interrupt helpers to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:58 +00:00
Blue Swirl
ec0ceb1759 Sparc: convert mmu_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:57 +00:00
Blue Swirl
163fa5ca51 Sparc: split MMU helpers
Move MMU helpers to mmu_helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:55 +00:00
Blue Swirl
b7da25f003 Sparc: fix coding style in helper.c
Before the next patch, fix coding style of the areas affected.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:53 +00:00
Blue Swirl
7a5e4488cd Sparc: avoid AREG0 for division op helpers
Make [su]div{,cc} helpers take a parameter for CPUState instead
of relying on global env. Move the functions to helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:52 +00:00
Blue Swirl
7922703623 Sparc: avoid AREG0 for softint op helpers and Leon cache control
Make softint op helpers and Leon cache irq manager take a parameter
for CPUState instead of relying on global env. Move the functions
to int{32,64}_helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:09 +00:00
Blue Swirl
063c367558 Sparc: avoid AREG0 for CWP and PSTATE helpers
Make CWP and PSTATE helpers take a parameter for CPUState instead
of relying on global env. Remove wrapper functions.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26 17:18:04 +00:00
Anthony Liguori
e86d9b12b5 Merge remote-tracking branch 'kwolf/for-anthony' into staging 2011-10-26 10:29:24 -05:00
Stefan Weil
0ec024f636 main-loop: Add missing include file
stdint.h defines the POSIX data types and is needed
for MinGW-w64 (and maybe other hosts).

v2: Instead of adding stdint.h directly, qemu-common.h is now
included and duplicate include statements were removed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-25 15:38:08 -05:00
Stefan Weil
d300854b1c target-sparc: Fix use of g_new0 / g_free
g_malloc0 needs g_free instead of free.
While fixing this, I also replaced g_malloc0 by g_new0
as was suggested by Stuart Brady.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25 19:30:33 +00:00
Stefan Weil
f37e2a6bb3 target-sparc: Fix order of function parameters
The MinGW-w64 gcc complains about wrong parameters for
gen_helper_fpadd16_s and three other functions.

gen_helper_fpadd16_s is declared like this (hidden in lots of macros):

static inline void
 gen_helper_fpadd16s(TCGv_i32 retval, TCGv_ptr arg1,
                     TCGv_i32 arg2, TCGv_i32 arg3);

So it looks like cpu_env should be the 2nd parameter.

Please review this patch as I have no environment to test it
(maybe the 1st parameter should be cpu_dst?).

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25 19:30:00 +00:00
Marc-André Lureau
ba43d28916 hda: do not mix output and input stream states, RHBZ #740493
Windows 7 may use the same stream number for input and output.
Current code will confuse streams.

Changes since v1:
- keep running_compat[] for migration version 1
- add running_real[] for migration version 2

Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2011-10-25 19:15:20 +04:00
Marc-André Lureau
36ac4ad3d0 hda: do not mix output and input streams, RHBZ #740493
Windows 7 may use the same stream number for input and output.
That will result in lot of garbage on playback.

The hardcoded value of 4 needs to be in sync with GCAP streams
description and IN/OUT registers.

Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2011-10-25 19:15:07 +04:00
Anthony Liguori
952e849c15 Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into staging 2011-10-24 10:51:12 -05:00
Fabien Chouteau
db418a0a7e Add stdio char device on windows
Simple implementation of an stdio char device on Windows.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:44:15 +00:00
Blue Swirl
070af38404 Sparc: split CWP and PSTATE op helpers
Move CWP and PSTATE op helpers to win_helper.c.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:10:18 +00:00
Blue Swirl
2ffd9176b1 Sparc: avoid AREG0 for lazy condition code helpers
Make lazy condition code helpers take a parameter for CPUState instead
of relying on global env.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23 15:09:37 +00:00