In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace:
if (-1 == foo())
with:
if (foo() == -1)
While this coding style is not in direct contravention of our currently
ratified CODING_STYLE treaty, it could be argued that the Article 3 of
the European Convention on Human Rights (prohibiting torture and "inhuman
or degrading treatment") reads on the matter.
[This commit message was brought to you without humour, as is evidenced
by the absence of any emoticons]
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that labels must be unique, the chr devices can't be opened anymore
within the serial port code (in case they are not already opened in
vl.c), as they end up with the same label. Instead opened so
non-assigned one directly in vl.c, with a different label.
This make MIPS Malta board emulation working again.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ticks_per_sec is a constant. There's no need to store it as a variable as it
never changes since our time is based on units.
Convert get_ticks_per_sec() to a static inline and move the constant into
qemu-timer.h. Remove all references to QEMU_TIMER_BASE so that we consistently
use this interface.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
loadvm_state is called from: vl.c during startup, vmstart() is called after finishing loading. The other caller do_loadvm() does the call after a vm_stop(). At both places where we can be saving state we are stoped a few lines before
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It don't work. It fails in this check
if (qemu_get_be32(f) != last_ram_offset)
With 512MB of ram, values were for me:
v = 20c00000 last_ram_offset = 20840000
Last time that some code changed that was this one.
commit 94a6b54fd6
Implement dynamic guest ram allocation.
(I.e. it has been broken since at least April)
Going back to the previous commit, ram load correctly, but vga screen gets
corrupted and ide don't load correctly. At this point I decide that removing
support is the only viable thing.
The last user of the ram_compress_* were RAM_SAVE_FLAG_FULL flag, but
that flag was never ever been stored in an image. Mark the flag obsolete
and remove the functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
start switching chardevs to QemuOpts. This patch adds the
infrastructure and converts the null device.
The patch brings two new functions:
qemu_chr_open_opts()
same as qemu_chr_open(), but uses QemuOpts instead of a
option char string.
qemu_chr_parse_compat()
accepts a traditional chardev option string, returns the
corresponding QemuOpts instance, to handle backward
compatibility.
The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:
-chardev null,id=test
This uses the new qemu_chr_open_opts. Thus with this patch alone only
the null device works. The other devices will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Doing this will make the vcpu ioctl be issued from the I/O thread, instead
of cpu thread. The correct behaviour is to call it from within the cpu thread,
as soon as we are ready to go.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-kvm: fix segfault when running kvm without /dev/kvm, falling back
to non-accelerated mode
We're seeing segfaults on systems without access to /dev/kvm. It
looks like the global kvm_allowed is being set just a little too late
in vl.c. This patch moves the kvm initialization a bit higher in the
vl.c main, just after options processing, and solves the segfaults.
We're carrying this patch in Ubuntu 9.10 Alpha. Please apply
upstream, or advise if and why this might not be the optimal solution.
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Move the kvm_init() call a bit higher to fix a segfault when
/dev/kvm is not available. The kvm_allowed global needs
to be set correctly a little earlier.
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are few places in vl.c not using the qemu version of
malloc/free/strdup.
Fix it.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vl.c will not link if CONFIG_KVM is not defined.
This patch fixes the problem.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PATH_MAX is used elsewhere in the qemu source tree without protection.
In addtion the actual code would not compile if PATH_MAX is not defined
Last the free() call is wrong as p is not malloc()ed.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rebased version of Anthony's patch: Allow to specify more than one
monitor terminal via the -monitor command line switch. This is
particularly useful when libvirt or some other management tool already
occupies the primary monitor but you need another one for debugging.
The current clumsy workaround is to multiplex such additional terminals
over a qemu character device (e.g. -serial mon:<device>).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to Documentation/kvm/api.txt, (and well, to common sense),
we should not be calling vcpu ioctls from within the iothread.
Since vcpu initialization issues a vcpu ioctl, move it a little bit
further in time to prevent it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we are using --serial telnet:0:5555,server or similar, ^C will not
kill qemu. We need to first connect using telnet, and the the ^C takes
effect.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With that patch applied "-balloon virtio,args" becomes a shortcut for
"-device virtio-balloon-pci,args".
Side effects:
- ballon device gains support for id=<tag>.
- ballon device is off by default now.
- initialization order changes, which may in different pci slot
assignment depending on the VM configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some functions for error reporting to address the
problem that error messages should be routed to different destinations
depending on the context of the caller, i.e. monitor command errors
should go to the monitor, command line errors to stderr.
qemu_error() is a printf-like function to report errors.
qemu_errors_to_file() and qemu_errors_to_mon() switch the destination
for the error message to the specified file or monitor. When setting a
new destination the old one will be kept. One can switch back using
qemu_errors_to_previous(). i.e. it works like a stack.
main() calls qemu_errors_to_file(stderr), so errors go to stderr by
default. monitor callbacks are wrapped into qemu_errors_to_mon() +
qemu_errors_to_previous(), so any errors triggered by monitor commands
will go to the monitor.
Each thread has its own error message destination. qemu-kvm probably
should add a qemu_errors_to_file(stderr) call to the i/o-thread
initialization code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-watchdog NAME is now equivalent to -device NAME, except it treats
option argument '?' specially, and supports only one watchdog.
A side effect is that a device created with -watchdog may now receive
a different PCI address.
i6300esb is now available on any machine with a PCI bus, not just PCs.
ib700 is still PC only, but that could be changed easily.
The only remaining use of struct WatchdogTimerModel and
watchdog_add_model() is supporting '-watchdog ?'. Should be replaced
by searching device_info_list for watchdog devices when we can
identify them there.
Also fixes ib700 not to use vm_clock before it is initialized: in
wdt_ib700_init(), called from register_watchdogs(), which runs before
init_timers(). The bug made ib700_write_enable_reg() crash in
qemu_del_timer().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_loadvm() is now called from the monitor.
load_vmstate() is called by do_loadvm() and when -loadvm command line is used.
Command line don't have to play games with vmstop()/vmstart()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For injecting multi-core and multi-threading CPU topology into guests
extend the -smp syntax to accommodate cores and threads specification.
Syntax: -smp smp_value[,cores=nr_cores][,threads=nr_threads]\
[,socket=nr_sockets][,maxcpus=max_cpus]
smp_value is the legacy value specifying the total number of vCPUs for
the guest. If you specify one of cores, threads or sockets this value
can be omitted. Missing values will be computed to fulfill:
smp_value = nr_cores * nr_threads * nr_sockets
where it will favour sockets over cores over threads (to mimic the
current behavior, which will only inject multiple sockets.)
So -smp 4,threads=2 will inject two sockets with 2 threads each,
-smp cores=4 is an abbreviation for -smp 4,cores=4,threads=1,sockets=1.
If max_cpus (the number of hotpluggable CPUs) is omitted, it will
be set to smp_value.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi,
After discussing the issue with Avi, Gleb and a couple others on irq,
we came to the conclusion that it is preferred to have QEMU request
features from the BIOS, rather than notifying the BIOS that it is
running on QEMU or KVM. This way memory ranges can change etc. and
an older BIOS will continue to work on newer QEMU if it receives the
info as a fw_cfg value.
This one also matches what qemu-kvm does for irq0override, except I
haven't made it configurable. I leave that as an exercise for whoever
would be interested in switching off irq0override.
Thanks,
Jes
Set irq0 override in fw_cfg, informing the BIOS that QEMU expects
override on irq0. This matches qemu-kvm, and will help sharing a
single BIOS binary.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the user does not want autostart, they can specify -S.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Depending on what glibc/kernel headers you are compiling against,
PR_SET_NAME may or may not be defined. Do the right thing if
PR_SET_NAME isn't defined and skip setting the process name.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch introduces dynamic timer intervals: we slow down the refresh
rate when there in no much activity but we get back to a fast refresh
rate when the activity resume.
Please note that qemu_timer_expired is not an inline function any more
because I needed to call it from vnc.c however I don't think this change
should have any serious consequence.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
First user of the new drive property. With this patch applied host
and guest config can be specified separately, like this:
-drive if=none,id=disk1,file=/path/to/disk.img
-device virtio-blk-pci,drive=disk1
You can set any property for virtio-blk-pci now. You can set the pci
address via addr=. You can switch the device into 0.10 compat mode
using class=0x0180. As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.
Old syntax continues to work. Internally it does the same as the two
lines above though. One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.
Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:
-drive if=none,id=sda,file=/path/to/disk.img
-device lsi,id=lsi,addr=<pciaddr>
-device scsi-disk,drive=sda,bus=lsi.0,lun=<n>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This adds a host drive, but doesn't implicitly add a guest drive for it.
First step in splitting host and guest configuration, check the
following patches to see how this can be used ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
