For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args. Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-14-armbru@redhat.com>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type.
This is appropriate with an input visitor: visit_start_alternate()
sets ->type according to the input, and bad input can lead to bad
->type.
It should never happen with an output, clone or dealloc visitor: if it
did, the alternate being output, cloned or deallocated would be messed
up beyond repair. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-12-armbru@redhat.com>
An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type. If it's an input visit, we then need to free the the
object we got from visit_start_alternate(). We do that with
qapi_free_FOO(), which uses the dealloc visitor.
Trouble is that object is in a bad state: its ->type is invalid. So
the dealloc visitor will run into the same error again, and the error
recovery skips deallocating the alternate's (invalid) alternative.
Works, because qapi_free_FOO() ignores the error.
Avoid it instead: free the messed up object with by g_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
visit_type_intN() and visit_type_uintN() fail when the value is out of
bounds.
This is appropriate with an input visitor: the value comes from input,
and input may be bad.
It should never happen with the other visitors: the value comes from
the caller, and callers must keep it within bounds. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-10-armbru@redhat.com>
output_type_enum() fails when *obj is not a valid value of the enum
type. Should not happen. Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]
The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors. Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-6-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-5-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-4-armbru@redhat.com>
Call visit_check_list(). Missed in commit a4a1c70dc7 "qapi: Make
input visitors detect unvisited list tails".
Drop an irrelevant error_propagate() while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-2-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qdict_iter() has just three uses and no test coverage. Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qlist_iter() has just three uses outside tests/. Replace by
QLIST_FOREACH_ENTRY() for more concise code and less type punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Coding style in moved code tidied up]
QLIST_FOREACH_ENTRY() traverses a tail queue manually. Use
QTAILQ_FIRST() and QTAILQ_NEXT() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The second argument 'id' is a pointer. Pass NULL rather than 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20200427005704.2475782-1-masahiroy@kernel.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424071142.3525-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
apply_to_qlist(), apply_to_node() work with QObjects. This is
designed for use by tests/qtest/qos-test.c, which gets the data in
that form via QMP. Goes back to commit fc281c8020 "tests: qgraph API
for the qtest driver framework".
Commit 275ab39d86 "fuzz: add support for qos-assisted fuzz targets"
added another user: qtest/fuzz/qos_fuzz.c. To get the data as
QObjects, it uses qmp_marshal_query_machines() and
qmp_marshal_qom_list_types().
All this code is rather cumbersome. Switch to working with generated
QAPI types instead:
* Replace apply_to_qlist() & friends by machines_apply_to_node() and
types_apply_to_node().
* Have qos_fuzz.c use qmp_query_machines() and qmp_qom_list_types()
instead.
* Have qos_test.c convert from QObject to the QAPI types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424071142.3525-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Target recurse-fuzz depends on pc-bios/optionrom/fuzz, which can't be
made. It's not used anywhere. Added in commit c621dc3e01, looks
like cargo cult. Delete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424071142.3525-2-armbru@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
spd_data_generate() splits @ram_size bytes into @nbanks RAM banks of
1 << sz_log2 MiB each, like this:
size = ram_size >> 20; /* work in terms of megabytes */
[...]
nbanks = 1;
while (sz_log2 > max_log2 && nbanks < 8) {
sz_log2--;
nbanks++;
}
Each iteration halves the size of a bank, and increments the number of
banks. Wrong: it should double the number of banks.
The bug goes back all the way to commit b296b664ab "smbus: Add a
helper to generate SPD EEPROM data".
It can't bite because spd_data_generate()'s current users pass only
@ram_size that result in *zero* iterations:
machine RAM size #banks type bank size
fulong2e 256 MiB 1 DDR 256 MiB
sam460ex 2048 MiB 1 DDR2 2048 MiB
1024 MiB 1 DDR2 1024 MiB
512 MiB 1 DDR2 512 MiB
256 MiB 1 DDR2 256 MiB
128 MiB 1 SDR 128 MiB
64 MiB 1 SDR 64 MiB
32 MiB 1 SDR 32 MiB
Apply the obvious, minimal fix. I admit I'm tempted to rip out the
unused (and obviously untested) feature instead, because YAGNI.
Note that this is not the final result, as spd_data_generate() next
increases #banks from 1 to 2 if possible. This is done "to avoid a
bug in MIPS Malta firmware". We don't even use this function with
machine type malta. *Shrug*
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422134815.1584-5-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
spd_data_generate() can pass @errp to error_setg() more than once when
it adjusts both memory size and type. Harmless, because no caller
passes anything that needs adjusting. Until the previous commit,
sam460ex passed types that needed adjusting, but not sizes.
spd_data_generate()'s contract is rather awkward:
If everything's fine, return non-null and don't set an error.
Else, if memory size or type need adjusting, return non-null and
set an error describing the adjustment.
Else, return null and set an error reporting why no data can be
generated.
Its callers treat the error as a warning even when null is returned.
They don't create the "smbus-eeprom" device then. Suspicious.
Since the previous commit, only "everything's fine" can actually
happen. Drop the unused code and simplify the callers. This gets rid
of the error API violation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422134815.1584-3-armbru@redhat.com>
Requesting 32 or 64 MiB of RAM with the sam460ex machine type produces
a useless warning:
qemu-system-ppc: warning: Memory size is too small for SDRAM type, adjusting type
This is because sam460ex_init() asks spd_data_generate() for DDR2,
which is impossible, so spd_data_generate() corrects it to DDR.
The warning goes back to commit 08fd99179a "sam460ex: Clean up SPD
EEPROM creation".
Make sam460ex_init() pass the correct SDRAM type to get rid of the
warning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422134815.1584-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
qmp_guest_suspend_disk() and qmp_guest_suspend_ram() pass @local_err
first to check_suspend_mode(), then to acquire_privilege(), then to
execute_async(). Continuing after errors here can only end in tears.
For instance, we risk tripping error_setv()'s assertion.
Fixes: aa59637ea1
Fixes: f54603b6aa
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_guest_get_memory_blocks() passes &local_err to
transfer_memory_block() in a loop. If this fails in more than one
iteration, it can trip error_setv()'s assertion.
Fix it to break the loop.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_xen_colo_do_checkpoint() passes @errp first to
replication_do_checkpoint_all(), and then to
colo_notify_filters_event(). If both fail, this will trip the
assertion in error_setv().
Similar code in secondary_vm_do_failover() calls
colo_notify_filters_event() only after replication_do_checkpoint_all()
succeeded. Do the same here.
Fixes: 0e8818f023
Cc: Zhang Chen <chen.zhang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20200422130719.28225-12-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qio_channel_socket_close() passes @errp first to
socket_listen_cleanup(), and then, if closesocket() fails, to
error_setg_errno(). If socket_listen_cleanup() failed, this will trip
the assertion in error_setv().
Fix by ignoring a second error.
Fixes: 73564c407c
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200422130719.28225-11-armbru@redhat.com>
The conversion of xen_pt_initfn() to xen_pt_realize() blindly replaced
XEN_PT_ERR() by error_setg(). Several error conditions that did not
fail xen_pt_initfn() now fail xen_pt_realize(). Unsurprisingly, the
cleanup on these errors looks highly suspicious.
Revert the inappropriate replacements.
Fixes: 5a11d0f754
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20200422130719.28225-10-armbru@redhat.com>
virtio_net_device_realize() rejects invalid duplex and speed values.
The error handling is broken:
$ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio
QEMU 4.2.93 monitor - type 'help' for more information
(qemu) device_add virtio-net,duplex=x
Error: 'duplex' must be 'half' or 'full'
(qemu) c
=================================================================
==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940
READ of size 8 at 0x62e000014590 thread T0
#0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826
#1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210
#2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271
#3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156
#4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162
#5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160
#6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043
#7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082
[...]
0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930)
freed by thread T1 here:
#0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c)
#2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128
#3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762
#4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788
#5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283
#6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519
#7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf)
previously allocated by thread T0 here:
#0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18)
#1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88)
#2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699
#3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654
#4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805
#5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905
[...]
==15654==ABORTING
Cause: virtio_net_device_realize() neglects to bail out after setting
the error. Fix that.
Fixes: 9473939ed7
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422130719.28225-9-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
virt_machine_device_plug_cb() passes @errp to
cryptodev_builtin_sym_close_session() in a loop. Harmless, because
cryptodev_builtin_sym_close_session() can't actually fail. Fix by
dropping its Error ** parameter.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422130719.28225-6-armbru@redhat.com>
timers_state.icount_time_shift must be in [0,63] to avoid undefined
behavior when shifting by it, e.g. in cpu_icount_to_ns().
icount_adjust() clamps it to [0,MAX_ICOUNT_SHIFT], with
MAX_ICOUNT_SHIFT = 10. configure_icount() doesn't. Fix that.
Fixes: a8bfac3708
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-5-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
configure_icount() is wrong that way. Harmless, because its @errp is
always &error_abort or &error_fatal.
Just as wrong (and just as harmless): when it fails, it can still
update global state.
Fix all that.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-4-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
check_cache_dropped() calls error_setg() in a loop. It fails to break
the loop in one instance. If a subsequent iteration error_setg()s
again, it trips error_setv()'s assertion.
Fix it to break the loop.
Fixes: 31be8a2a97
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200422130719.28225-3-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
cryptodev_builtin_cleanup() passes @errp to
cryptodev_builtin_sym_close_session() in a loop. Harmless, because
cryptodev_builtin_sym_close_session() can't actually fail. Fix it
anyway.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200422130719.28225-2-armbru@redhat.com>
qemu-img create, convert, amend, and measure use accumulate_options()
to merge multiple -o options. This is broken for -o "":
$ qemu-img create -f qcow2 -o backing_file=a -o "" -o backing_fmt=raw,size=1M new.qcow2
qemu-img: warning: Could not verify backing image. This may become an error in future versions.
Could not open 'a,backing_fmt=raw': No such file or directory
Formatting 'new.qcow2', fmt=qcow2 size=1048576 backing_file=a,,backing_fmt=raw cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ qemu-img info new.qcow2
image: new.qcow2
file format: qcow2
virtual size: 1 MiB (1048576 bytes)
disk size: 196 KiB
cluster_size: 65536
--> backing file: a,backing_fmt=raw
Format specific information:
compat: 1.1
lazy refcounts: false
refcount bits: 16
corrupt: false
Merging these three -o the obvious way is wrong, because it results in
an unwanted ',' escape:
backing_file=a,,backing_fmt=raw,size=1M
~~
We could silently drop -o "", but Kevin asked me to reject it instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
is_valid_option_list()'s purpose is ensuring qemu-img.c's can safely
join multiple parameter strings separated by ',' like this:
g_strdup_printf("%s,%s", params1, params2);
How it does that is anything but obvious. A close reading of the code
reveals that it fails exactly when its argument starts with ',' or
ends with an odd number of ','. Makes sense, actually, because when
the argument starts with ',', a separating ',' preceding it would get
escaped, and when it ends with an odd number of ',', a separating ','
following it would get escaped.
Move it to qemu-img.c and rewrite it the obvious way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200415074927.19897-9-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-8-armbru@redhat.com>
When opts_parse() sets @invalidp to true, qemu_opts_parse_noisily()
uses has_help_option() to decide whether to print help. This parses
the input string a second time.
Easy to avoid: replace @invalidp by @help_wanted.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200415074927.19897-7-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-6-armbru@redhat.com>
has_help_option() uses its own parser. It's inconsistent with
qemu_opts_parse(), as demonstrated by test-qemu-opts case
/qemu-opts/has_help_option. Fix by reusing the common parser.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415074927.19897-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200415074927.19897-4-armbru@redhat.com>
