Commit de63ab6 "migrate: Share common MigrationParameters struct"
reused MigrationParameters for the arguments of
migrate-set-parameters, with the following rationale:
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
I need to unshare them to correct a design flaw in a stupid, but
minimally invasive way, in the next commit. We can restore the
sharing when we redo that patch in a less stupid way. Add a suitable
TODO comment.
Note that I revert only the sharing part of commit de63ab6, not the
part that made the members of query-migrate-parameters' result
optional. The schema (and thus introspection) remains inaccurate for
query-migrate-parameters. If we decide not to restore the sharing, we
should revert that part, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Optional MigrationParameters members tls_creds and tls_hostname can't
actually be absent outside qmp_migrate_set_parameters() since commit
4af245d (v2.9.0).
Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0)
that made tls_creds and tls_hostname absent instead of "" in the value
of query-migrate-parameters, even though commit de63ab6 called that a
mistake. What a mess.
Drop the redundant tests for presence, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
QMP command
{ "execute": "change",
"arguments": { "device": "vnc", "target": "password", "arg": PWD } }
behaves just like
{ "execute": "change-vnc-password",
"arguments": { "password", "arg": PWD } }
Their documentation differs, however. According to
change-vnc-password's documentation, "an empty password [...] will set
the password to the empty string", while change's documentation claims
"no future logins will be allowed". The former is actually correct.
Replace the incorrect claim by a reference to change-vnc-password.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1500448182-21376-1-git-send-email-armbru@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Include name of parent type of each type on 'qom-list-types' output.
Without this, there's no way to figure out the parents of a given type
without making additional 'qom-list-types' queries.
In addition to the test case for the new feature, update the
abstract-interface test case to use the new field and avoid the
"qom-list-types implements=object" trick.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A client may be interested in getting the list of both abstract and
non-abstract types. Instead of requiring them to make multiple queries
with different filter arguments, just return an 'abstract' field in
'qom-list-types'.
In addition to the new test code for validating this field, update the
abstract-interfaces test case to query for all 'interface' subtypes
(including abstract ones), and to look at the 'abstract' field directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds a possibility to change a char device without a frontend
removal.
Ideally, it would have to happen transparently to a frontend, i.e.
frontend would continue its regular operation.
However, backends are not stateless and are set up by the frontends
via qemu_chr_fe_<> functions, and it's not (generally) possible to replay
that setup entirely in a backend code, as different chardevs respond
to the setup calls differently, so do frontends work differently basing
on those setup responses.
Moreover, some frontend can generally get and save the backend pointer
(qemu_chr_fe_get_driver()), and it will become invalid after backend change.
So, a frontend which would like to support chardev hotswap has to register
a "backend change" handler, and redo its backend setup there.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1499342940-56739-4-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
When this capability is enabled, QEMU will use the return path even for
precopy migration. This is helpful at least in one case when destination
failed to load the image while source quited without confirmation. With
return path, source will wait for the last response from destination,
and if destination fails, it'll fail the migration on source, then the
guest can be run again on the source (rather than assuming to be good,
then the guest will be lost after source quits).
It needs to be enabled explicitly on source, otherwise disabled.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The "This command is experimental" note in ObjectTypeInfo is obsolete
since 2012. Commit 5192082097 removed the
warning from the qom-list-types command documentation, but we forgot to
remove the warning from ObjectTypeInfo.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170516205351.12101-1-ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Create one capability for block migration and one parameter for
incremental block migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- address all Markus comments
- use Markus and Eric text descriptions
- change logic another time
- improve text messages
legacy cpu to node mapping is using cpu index values to map
VCPU to node with help of '-numa node,nodeid=node,cpus=x[-y]'
option. However cpu index is internal concept and QEMU users
have to guess /reimplement qemu's logic/ to map it to
a concrete cpu socket/core/thread to make sane CPUs
placement across numa nodes.
This patch allows to map cpu objects to numa nodes using
the same properties as used for cpus with -device/device_add
(socket-id/core-id/thread-id/node-id).
At present valid properties/values to address CPUs could be
fetched using hotpluggable-cpus monitor/qmp command, it will
require user to start qemu twice when creating domain to fetch
possible CPUs for a machine type/-smp layout first and
then the second time with numa explicit mapping for actual
usage. The first step results could be saved and reused to
set/change mapping later as far as machine type/-smp stays
the same.
Proposed impl. supports exact and wildcard matching to
simplify CLI and allow to set mapping for a specific cpu
or group of cpu objects specified by matched properties.
For example:
# exact mapping x86
-numa cpu,node-id=x,socket-id=y,core-id=z,thread-id=n
# exact mapping SPAPR
-numa cpu,node-id=x,core-id=y
# wildcard mapping, all cpu objects that match socket-id=y
# are mapped to node-id=x
-numa cpu,node-id=x,socket-id=y
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1494415802-227633-18-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
if board supports CpuInstanceProperties, report them for
each CPU thread listed. Main motivation for this is to
provide these properties introspection via QMP interface
for using in test cases to verify numa node to cpu mapping,
which includes not only boards that support cpu hotplug
and have this info in query-hotpluggable-cpus (pc/spapr)
but also for boards that don't not support hotpluggable-cpus
but support numa mapping (virt-arm).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1494415802-227633-12-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch is going to add SLIT table support in QEMU, and provides
additional option `dist` for command `-numa` to allow user set vNUMA
distance by QEMU command.
With this patch, when a user wants to create a guest that contains
several vNUMA nodes and also wants to set distance among those nodes,
the QEMU command would like:
```
-numa node,nodeid=0,cpus=0 \
-numa node,nodeid=1,cpus=1 \
-numa node,nodeid=2,cpus=2 \
-numa node,nodeid=3,cpus=3 \
-numa dist,src=0,dst=1,val=21 \
-numa dist,src=0,dst=2,val=31 \
-numa dist,src=0,dst=3,val=41 \
-numa dist,src=1,dst=2,val=21 \
-numa dist,src=1,dst=3,val=31 \
-numa dist,src=2,dst=3,val=21 \
```
Signed-off-by: He Chen <he.chen@linux.intel.com>
Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This introduces basic support for TN3270, which needs to negotiate
three Telnet options during handshake:
- End of Record
- Binary Transmission
- Terminal-Type
As a basic implementation, this simply ignores NOP and Interrupt
Process(IP) commands. More work should be done for them later.
For more details, please refer to RFC 854 and 1576.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The number of dirty pages is output in 'pages' in the command
'info migrate', so add page-size to calculate the number of dirty
pages in bytes.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Note that the new variants are impossible in qemu_gluster_glfs_init(),
because the gconf->server can only come from qemu_gluster_parse_uri()
or qemu_gluster_parse_json(), and neither can create anything but
'inet' or 'unix'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use InetSocketAddress in the QAPI schema. However, the code
doesn't use inet_connect_saddr(), but formats "host" and "port" into a
configuration string for rados_conf_set(). Thus, members "numeric",
"to", "ipv4" and "ipv6" are silently ignored. Not nice. Example:
-blockdev rbd,node-name=nn,pool=p,image=i,server.0.host=h0,server.0.port=12345,server.0.ipv4=off
Factor a suitable InetSocketAddressBase out of InetSocketAddress, and
use that. "numeric", "to", "ipv4" and "ipv6" are now rejected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-2-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The tls-creds parameter has a default value of NULL indicating
that TLS should not be used. Setting it to non-NULL enables
use of TLS. Once tls-creds are set to a non-NULL value via the
monitor, it isn't possible to set them back to NULL again, due
to current implementation limitations. The empty string is not
a valid QObject identifier, so this switches to use "" as the
default, indicating that TLS will not be used
The tls-hostname parameter has a default value of NULL indicating
the the hostname from the migrate connection URI should be used.
Again, once tls-hostname is set non-NULL, to override the default
hostname for x509 cert validation, it isn't possible to reset it
back to NULL via the monitor. The empty string is not a valid
hostname, so this switches to use "" as the default, indicating
that the migrate URI hostname should be used.
Using "" as the default for both, also means that the monitor
commands "info migrate_parameters" / "query-migrate-parameters"
will report existance of tls-creds/tls-parameters even when set
to their default values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This replaces manual references like "For the arguments, see the
documentation of ..." by a generated reference "Arguments: the members
of ...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-25-git-send-email-armbru@redhat.com>
We traditionally mark optional members #optional in the doc comment.
Before commit 3313b61, this was entirely manual.
Commit 3313b61 added some automation because its qapi2texi.py relied
on #optional to determine whether a member is optional. This is no
longer the case since the previous commit: the only thing qapi2texi.py
still does with #optional is stripping it out. We still reject bogus
qapi-schema.json and six places for qga/qapi-schema.json.
Thus, you can't actually rely on #optional to see whether something is
optional. Yet we still make people add it manually. That's just
busy-work.
Drop the code to check, fix up and strip out #optional, along with all
instances of #optional. To keep it out, add code to reject it, to be
dropped again once the dust settles.
No change to generated documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
We use tag #optional to mark optional members, like this:
# @name: #optional The name of the guest
texi_body() strips #optional, but not whitespace around it. For the
above, we get in qemu-qmp-qapi.texi
@item @code{'name'} (optional)
The name of the guest
@end table
The extra space can lead to artifacts in output, e.g in
qemu-qmp-ref.7.pod
=item C<'name'> (optional)
The name of the guest
and then in qemu-qmp-ref.7
.IX Item "name (optional)"
.Vb 1
\& The name of the guest
.Ve
instead of intended plain
.IX Item "name (optional)"
The name of the guest
Get rid of these artifacts by removing whitespace around #optional
along with it.
This turns three minus signs in qapi-schema.json into markup, because
they're now at the beginning of the line. Drop them, they're unwanted
there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1489582656-31133-11-git-send-email-armbru@redhat.com>
qapi.py has a hardcoded white-list of type names that may violate the
rule on use of upper and lower case. Add a new pragma directive
'name-case-whitelist', and use it to replace the hard-coded
white-list.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qapi.py has a hardcoded white-list of command names that may violate
the rules on permitted return types. Add a new pragma directive
'returns-whitelist', and use it to replace the hard-coded white-list.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we added the documentation generator in commit 3313b61, doc
comments are mandatory. That's a very good idea for a schema that
needs to be documented, but has proven to be annoying for testing.
Make doc comments optional again, but add a new directive
{ 'pragma': { 'doc-required': true } }
to let a QAPI schema require them.
Add test cases for the new pragma directive. While there, plug a
minor hole in includ directive test coverage.
Require documentation in the schemas we actually want documented:
qapi-schema.json and qga/qapi-schema.json.
We could probably make qapi2texi.py cope with incomplete
documentation, but for now, simply make it refuse to run unless the
schema has 'doc-required': true.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1489582656-31133-3-git-send-email-armbru@redhat.com>
[qapi-code-gen.txt wording tweaked]
Reviewed-by: Eric Blake <eblake@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYt7llAAoJECgfDbjSjVRp+r4H/1cmQ4F67H8oSOAT8xuAQFku
OdHoVRJMWf7CRvZ7JqVke/a877d+h6ZpfW5dZQ7hp7O7rkPiuPHa5PVb0WGwDqrD
scSOIvDPxJm19pnfZoF4zx+Ov45W5ahF+gwwm/sJU232ApLqOmAjs0FUxidkadQE
f5Jrjs20WO2Vkkcd3U7Zl31myre0V7AbwIm7dB/8B+dpL6bJcxSvlM4krwLdBY6S
lLs9V6ypRzjUxS3MDANL75KNrO/zys55J+Pa4sEh4+H0OX71v9Icl3s1zaM8J/EN
VPjdqhDvJuEahc50FbJyRZQGIzOZ6PcGMsKUHKlxoVmDYZ6Pv5lOnpaLZRT6HMk=
=ITdO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal. Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pxb-pcie: fix PCI Express hotplug support
tests/acpi: update DSDT after last patch
acpi: simplify _OSC
virtio: unbreak virtio-pci with IOMMU after caching ring translations
virtio: add missing region cache init in virtio_load()
virtio: invalidate memory in vring_set_avail_event()
virtio: guard vring access when setting notification
virtio: check for vring setup in virtio_queue_empty
MAINTAINERS: Add VM Generation ID entries
tests: Move reusable ACPI code into a utility file
qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
ACPI: Add Virtual Machine Generation ID support
ACPI: Add vmgenid blob storage to the build tables
docs: VM Generation ID device description
linker-loader: Add new 'write pointer' command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.
-----BEGIN PGP SIGNATURE-----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=KPbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 queue, 2017-02-27
"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.
# gpg: Signature made Mon 27 Feb 2017 16:24:15 GMT
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
i386: Improve query-cpu-model-expansion full mode
i386: Implement query-cpu-model-expansion QMP command
i386: Define static "base" CPU model
i386: Don't set CPUClass::cpu_def on "max" model
i386: Make "max" model not use any host CPUID info on TCG
i386: Create "max" CPU model
qapi-schema: Comment about full expansion of non-migration-safe models
i386: Reorganize and document CPUID initialization steps
i386: Rename X86CPU::host_features to X86CPU::max_features
i386: Add ordering field to CPUClass
i386: Unset cannot_destroy_with_object_finalize_yet on "host" model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Add a note warning that static expansion may not be 100% accurate
when the CPU model is not migration-safe. This will be the case
on x86 when expansing the "host" CPU model, because there are
"host" features that can't have a migration-safe representation
(e.g. "host-cache-info").
Message-Id: <20170116211124.29245-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They're best avoided
in new code.
NetLegacyOptions isn't new, but it's only used internally, not in QMP.
Convert it to a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487709988-14322-3-git-send-email-armbru@redhat.com>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They're best avoided
in new code.
NumaOptions isn't new, but it's only used internally, not in QMP.
Convert it to a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487709988-14322-2-git-send-email-armbru@redhat.com>
IOthreads were recently extended by new properties that can
enable/disable and configure aio polling. This will also allow
other tools that uses QEMU to probe for existence of those new
properties via query-qmp-schema.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Message-Id: <3163c16d6ab4257f7be9ad44fe9cc0ce8c359e5a.1486718555.git.phrdina@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add QEMU Wacom Penpartner serial tablet emulation.
GSoC 2016 project.
Signed-off-by: Anatoli Huseu1 <avg.tolik@gmail.com>
Various cleanups.
Add line speed tracking.
Implement ST and SP commands.
Adapted to chardev QOMification.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486391007-10116-1-git-send-email-kraxel@redhat.com
Windows reports BSOD parameters through Hyper-V crash MSRs. This
information is very useful for initial crash analysis and thus
it would be nice to have a way to fetch it.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.
We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added a missing '(Since 2.9)'
This feature frees the migrated memory on the source during postcopy-ram
migration. In the second step of postcopy-ram migration when the source vm
is put on pause we can free unnecessary memory. It will allow, in particular,
to start relaxing the memory stress on the source host in a load-balancing
scenario.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-3-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manually merged in Pavel's 'migration: madvise error_report fixup!'
Currently the VNC authentication info is emitted at the
top level of the query-vnc-servers data. This is wrong
because the authentication scheme differs between plain
and websockets when TLS is enabled. We should instead
report auth against the individual servers. e.g.
(QEMU) query-vnc-servers
{
"return": [
{
"clients": [],
"id": "default",
"auth": "vencrypt",
"vencrypt": "x509-vnc",
"server": [
{
"host": "127.0.0.1"
"service": "5901",
"websocket": false,
"family": "ipv4",
"auth": "vencrypt",
"vencrypt": "x509-vnc"
},
{
"host": "127.0.0.1",
"service": "5902",
"websocket": true,
"family": "ipv4",
"auth": "vnc"
}
]
}
]
}
This also future proofs the QMP schema so that we can
cope with multiple VNC server instances, listening on
different interfaces or ports, with different auth
setup.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adds "side" and "extra" values to enum InputButton. The naming was borrowed
from evdev since it is more descriptive than "button4" and "button5".
Signed-off-by: Fabian Lesniak <fabian@lesniak-it.de>
Message-id: 20161206190007.7539-2-fabian@lesniak-it.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't want that commas to be part of the generated documentation,
so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20170122145407.27476-1-sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
