The dolog macro is unused. Remove the macro and use the now unused
ES1370_VERBOSE macro to replace its inverse ES1370_SILENT macro.
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230917065813.6692-3-vr_qemu@t-online.de>
It seems that nobody has enabled the debug code of the ES1370
device for a long time. Since then, the code has bit-rotted.
Replace the bit-rotten code with tracepoints.
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230917065813.6692-2-vr_qemu@t-online.de>
Reset the current sample counter when writing the Channel Sample
Count Register. The Linux ens1370 driver and the AROS sb128
driver expect the current sample counter counts down from sample
count to 0 after a write to the Channel Sample Count Register.
Currently the current sample counter starts from 0 after a reset
or the last count when the counter was stopped.
The current sample counter is used to raise an interrupt whenever
a complete buffer was transferred. When the counter starts with a
value lower than the reload value, the interrupt triggeres before
the buffer was completly transferred. This may lead to corrupted
audio streams.
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230917065813.6692-1-vr_qemu@t-online.de>
* Fix for VFIO display when using Intel vGPUs
* Support for dynamic MSI-X
-----BEGIN PGP SIGNATURE-----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=QRhQ
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231009' of https://github.com/legoater/qemu into staging
vfio queue:
* Fix for VFIO display when using Intel vGPUs
* Support for dynamic MSI-X
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUjoLIACgkQUaNDx8/7
# 7KE+gw/9FTQFRkmlkSMlqRGjINF/VmfX6TsX+dy3ZB+aJia6qahco+u9hd3yQxiA
# /KI4FZnQCH/ZFizjR7hJdsxLnd+l989RFmoy+NTEXfgBMSLu4aU1UlVC1pyuhJ5L
# xadGQ2UIclD1Gz70laa9ketebLHdyc/Pku2xt9oreR6kRRFHZ3V4QhMNhcwGapO1
# 0wytLFXPVyGa7YYTB5qQPHPWyY9sM0n6E4E7jVnhfOw75cUVNvSr+9HlJbR1FN3Z
# 4klNMXayKGAZmh9oKpQWBsf4aUwLDu//eCk64TkQHp0pNrvRAJJBwgkhsI1FigeW
# SJ2JjQsIg/vLu2oyUhp2PJ59cQSMFZPgEqRhhRQ2RKhIfwOZY4kgfvKFtSHvWijV
# u0r8/HMIJE0fNffigyDlfLCsUEYu3OuJXMlU+5xrwi77hWlPrGb8D1J7LhwUnldk
# kZaw9VEranlbMQT773cMA7f/pgS1Sc6CkdqfJLGIHA4PsEk44Lzen2BzRroz8+Km
# tn8hHt+GQK/ZGKmOPXWm44Bd48Be08cMz/pOI2cqoScEKKEQ8HUul3H1/k8sqauh
# 1gPo1hIPXo/GaGRvUvPsj4cK8oQm77EHksEQ4Nxvn+ZWTW2FnMQkb9QFbF8bTmEo
# KiJJ6s8qbd1CWGYbO0GSE8ss3NUZq1YbWsMXmUP0JccEgvjeL2M=
# =QRhQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 Oct 2023 02:41:54 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231009' of https://github.com/legoater/qemu:
vfio/pci: enable MSI-X in interrupt restoring on dynamic allocation
vfio/pci: use an invalid fd to enable MSI-X
vfio/pci: enable vector on dynamic MSI-X allocation
vfio/pci: detect the support of dynamic MSI-X allocation
vfio/pci: rename vfio_put_device to vfio_pci_put_device
vfio/display: Fix missing update to set backing fields
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
add support for booting:
- MacOS 7.1 - 8.1, with or without virtual memory enabled
- A/UX 3.0.1
- NetBSD 9.3
- Linux (via EMILE)
-----BEGIN PGP SIGNATURE-----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=RUHg
-----END PGP SIGNATURE-----
Merge tag 'q800-for-8.2-pull-request' of https://github.com/vivier/qemu-m68k into staging
Pull request q800 20231008
add support for booting:
- MacOS 7.1 - 8.1, with or without virtual memory enabled
- A/UX 3.0.1
- NetBSD 9.3
- Linux (via EMILE)
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmUiSrISHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748oSUQAKAm3TPYQUDDVFTi2uhzv6IgNSgOVUhK
# 3I3xoNb0UR9AT3Wfg1fah5La3p0kL9Y25gvhCl6veUg39WVicv3fbqUevbJ1Nwgl
# ovwS3MRRcvYhU+omcXImFfoIPyOxfSf3vZ6SedIkB24hQyXN9eFBZMfgCODU6lfo
# rAd/Hm50N2jRI8aKjvN+uHFRz75wqq6rNk/4QLWihRqhtWrjUDPHOTMI9sQxWy9z
# LcXxVKbWCY8/WOAandsGL94l2jfu94HM6CfwHaumdxvPBZT6WUyCv3T1rJsVJU29
# b8oTLcwKAmZ7lGLbjl6GdB8q5KAJFCAGLWuEbNIMj0orB37OpUd0Wx2SD9+aA53H
# yoKGbk6N1UappTtcnZCfwzWRzNaXrRno+w+/xYjlKsXBdHV9ZXHMGD5ERxoC6MY7
# ISsCa4bafeUDes6SCetgq87ho69E8l+gAlNYPgidHaTP226BjrYWQRJIa0leczfO
# aE6dAG7MQFOnOjeOHEJMDB2XpKHiVe1lyVGQH485cLW1J6LHJFWUfUUH2Zjs1v1z
# eXZHBTclPO2wbuQzXG6pAz2jdF/9w4ft/aA0PQhQcFxa9RB6AoNFG/juHJN5eUiw
# NXJetR2g1juNPqmMFWDNMJ7Zzce5Chjoj69XJBFYSXhgbOtwpUpoEPZUeIMcW1eJ
# Va2HvyDQPp1B
# =RUHg
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 08 Oct 2023 02:22:42 EDT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'q800-for-8.2-pull-request' of https://github.com/vivier/qemu-m68k:
mac_via: extend timer calibration hack to work with A/UX
q800: add alias for MacOS toolbox ROM at 0x40000000
q800: add ESCC alias at 0xc000
mac_via: always clear ADB interrupt when switching to A/UX mode
mac_via: implement ADB_STATE_IDLE state if shift register in input mode
mac_via: workaround NetBSD ADB bus enumeration issue
mac_via: work around underflow in TimeDBRA timing loop in SETUPTIMEK
swim: update IWM/ISM register block decoding
swim: split into separate IWM and ISM register blocks
swim: add trace events for IWM and ISM registers
q800: add easc bool machine class property to switch between ASC and EASC
q800: add Apple Sound Chip (ASC) audio to machine
asc: generate silence if FIFO empty but engine still running
audio: add Apple Sound Chip (ASC) emulation
q800: allow accesses to RAM area even if less memory is available
q800: add IOSB subsystem
q800: implement additional machine id bits on VIA1 port A
q800: add machine id register
q800: add djMEMC memory controller
q800-glue.c: convert to Resettable interface
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-4-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename variables or remove nested definitions where it makes sense,
so that we can finally compile the USB code with "-Wshadow", too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004130822.113343-1-thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename a variable in vhost_dev_sync_region() and remove a superfluous
declaration in vhost_commit() to make this code compilable with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004114809.105672-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
"len" is used as parameter of the functions virtio_write_config()
and virtio_read_config(), and additionally as a local variable,
so this causes a compiler warning when compiling with "-Wshadow"
and can be confusing for the reader. Rename the local variables
to "caplen" to avoid this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004095302.99037-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the innermost local variables to avoid compiler warnings
with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004084939.96349-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Code changes that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch.
See also
Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20231003102803.6163-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
[1839/2601] Compiling C object libqemu-loongarch64-softmmu.fa.p/hw_loongarch_virt.c.o
../hw/loongarch/virt.c: In function 'loongarch_irq_init':
../hw/loongarch/virt.c:665:14: warning: declaration of 'i' shadows a previous local [-Wshadow=compatible-local]
for (int i = 0; i < num; i++) {
^
../hw/loongarch/virt.c:582:19: note: shadowed declaration is here
int cpu, pin, i, start, num;
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230926071253.3601021-1-gaosong@loongson.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the version not burried in the macro to cap_h.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20230925152258.5444-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The A/UX timer calibration loop runs continuously until 2 consecutive iterations
differ by at least 0x492 timer ticks. Modern hosts execute the timer calibration
loop so fast that this situation never occurs causing a hang on boot.
Use a similar method to Shoebill which is to randomly add 0x500 to the T2
counter value during calibration to enable it to eventually succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the Apple Quadra 800 Developer Note document, the Quadra 800 ROM
consists of 2 ROM code sections based at offsets 0x0 and 0x800000. A/UX attempts
to access the toolbox ROM at the lower offset during startup, so provide a
memory alias to allow the access to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tests on real Q800 hardware show that the ESCC is addressable at multiple locations
within the ESCC memory region - at least 0xc000, 0xc020 (as expected by the MacOS
toolbox ROM) and 0xc040.
All released NetBSD kernels before 10 use the 0xc000 address which causes a fatal
error when running the MacOS booter. Add a single memory region alias at 0xc000
to enable NetBSD kernels to start booting under QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When the NetBSD kernel initialises it can leave the ADB interrupt asserted
depending upon where in the ADB poll cycle the MacOS ADB interrupt handler
is when the NetBSD kernel disables interrupts.
The NetBSD ADB driver uses the ADB interrupt state to determine if the ADB
is busy and refuses to send ADB commands unless it is clear. To ensure that
this doesn't happen, always clear the ADB interrupt when switching to A/UX
mode to ensure that the bus enumeration always occurs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
NetBSD switches directly to IDLE state without switching the shift register to
input mode. Duplicate the existing ADB_STATE_IDLE logic in input mode from when
the shift register is in output mode which allows the ADB autopoll handler to
handle the response.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
NetBSD assumes it can send its first ADB command after sending the ADB_BUSRESET
command in ADB_STATE_NEW without changing the state back to ADB_STATE_IDLE
first as detailed in the ADB protocol.
Add a workaround to detect this condition at the start of ADB enumeration
and send the next command written to SR after a ADB_BUSRESET onto the bus
regardless, even if we don't detect a state transition to ADB_STATE_NEW.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS toolbox ROM calculates the number of branches that can be executed
per millisecond as part of its timer calibration. Since modern hosts are
considerably quicker than original hardware, the negative counter reaches zero
before the calibration completes leading to division by zero later in
CALCULATESLOD.
Instead of trying to fudge the timing loop (which won't work for TimeDBRA/TimeSCCDB
anyhow), use the pattern of access to the VIA1 registers to detect when SETUPTIMEK
has finished executing and write some well-known good timer values to TimeDBRA
and TimeSCCDB taken from real hardware with a suitable scaling factor.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update the IWM/ISM register block decoding to match the description given in the
"SWIM Chip Users Reference". This allows us to validate the device response to
the guest OS which currently only does just enough to indicate that the floppy
drive is unavailable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The swim chip provides an implementation of both Apple's IWM and ISM floppy disk
controllers. Split the existing implementation into separate register banks for
each controller, whilst also switching the IWM registers from 16-bit to 8-bit
as implemented in real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This determines whether the Apple Sound Chip (ASC) is set to enhanced mode
(default) or to original mode. The real Q800 hardware used an EASC chip however
a lot of older software only works with the older ASC chip.
Adding this as a machine parameter allows QEMU to be used as an developer aid
for testing and migrating code from ASC to EASC.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Quadra 800 has the enhanced ASC (EASC) audio chip which supports both the
legacy IRQ routing through VIA2 and also "A/UX" mode routing direct to the
CPU.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231004083806.757242-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS (un)helpfully leaves the FIFO engine running even when all the samples have
been written to the hardware, and expects the FIFO status flags and IRQ to be
updated continuously.
There is an additional problem in that not all audio backends guarantee an
all-zero output when there is no FIFO data available, in particular the Windows
dsound backend which re-uses its internal circular buffer causing the last played
sound to loop indefinitely.
Whilst this is effectively a bug in the Windows dsound backend, work around it
for now using a simple heuristic: if the FIFO remains empty for half a cycle
(~23ms) then continuously fill the generated buffer with empty silence.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Apple Sound Chip was primarily used by the Macintosh II to generate sound
in hardware which was previously handled by the toolbox ROM with software
interrupts.
Implement both the standard ASC and also the enhanced ASC (EASC) functionality
which is used in the Quadra 800.
Note that whilst real ASC hardware uses AUDIO_FORMAT_S8, this implementation uses
AUDIO_FORMAT_U8 instead because AUDIO_FORMAT_S8 is rarely used and not supported
by some audio backends like PulseAudio and DirectSound when played directly with
-audiodev out.mixing-engine=off.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Co-developed-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231004083806.757242-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS attempts a series of writes and reads over the entire RAM area in order
to determine the amount of RAM within the machine. Allow accesses to the
entire RAM area ignoring writes and always reading zero for areas where there
is no physical RAM installed to allow MacOS to detect the memory size without
faulting.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It is needed because it defines the BIOSConfig area.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS reads this address to identify the hardware.
This is a basic implementation returning the ID of Quadra 800.
Details:
http://mess.redump.net/mess/driver_info/mac_technical_notes
"There are 3 ID schemes [...]
The third and most scalable is a machine ID register at 0x5ffffffc.
The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
The rest of the bits are a per-model identifier.
Model Lower 16 bits of ID
...
Quadra/Centris 610/650/800 0x2BAD"
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The djMEMC controller is used to store information related to the physical memory
configuration.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the GLUE device to 3-phase reset. The legacy method
doesn't do anything that's invalid in the hold phase, so the
conversion is simple and not a behaviour change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
During migration restoring, vfio_enable_vectors() is called to restore
enabling MSI-X interrupts for assigned devices. It sets the range from
0 to nr_vectors to kernel to enable MSI-X and the vectors unmasked in
guest. During the MSI-X enabling, all the vectors within the range are
allocated according to the VFIO_DEVICE_SET_IRQS ioctl.
When dynamic MSI-X allocation is supported, we only want the guest
unmasked vectors being allocated and enabled. Use vector 0 with an
invalid fd to get MSI-X enabled, after that, all the vectors can be
allocated in need.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Guests typically enable MSI-X with all of the vectors masked in the MSI-X
vector table. To match the guest state of device, QEMU enables MSI-X by
enabling vector 0 with userspace triggering and immediately release.
However the release function actually does not release it due to already
using userspace mode.
It is no need to enable triggering on host and rely on the mask bit to
avoid spurious interrupts. Use an invalid fd (i.e. fd = -1) is enough
to get MSI-X enabled.
After dynamic MSI-X allocation is supported, the interrupt restoring
also need use such way to enable MSI-X, therefore, create a function
for that.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The vector_use callback is used to enable vector that is unmasked in
guest. The kernel used to only support static MSI-X allocation. When
allocating a new interrupt using "static MSI-X allocation" kernels,
QEMU first disables all previously allocated vectors and then
re-allocates all including the new one. The nr_vectors of VFIOPCIDevice
indicates that all vectors from 0 to nr_vectors are allocated (and may
be enabled), which is used to loop all the possibly used vectors when
e.g., disabling MSI-X interrupts.
Extend the vector_use function to support dynamic MSI-X allocation when
host supports the capability. QEMU therefore can individually allocate
and enable a new interrupt without affecting others or causing interrupts
lost during runtime.
Utilize nr_vectors to calculate the upper bound of enabled vectors in
dynamic MSI-X allocation mode since looping all msix_entries_nr is not
efficient and unnecessary.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Kernel provides the guidance of dynamic MSI-X allocation support of
passthrough device, by clearing the VFIO_IRQ_INFO_NORESIZE flag to
guide user space.
Fetch the flags from host to determine if dynamic MSI-X allocation is
supported.
Originally-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_put_device() is a VFIO PCI specific function, rename it with
'vfio_pci' prefix to avoid confusing.
No functional change.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The below referenced commit renames scanout_width/height to
backing_width/height, but also promotes these fields in various portions
of the egl interface. Meanwhile vfio dmabuf support has never used the
previous scanout fields and is therefore missed in the update. This
results in a black screen when transitioning from ramfb to dmabuf display
when using Intel vGPU with these features.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1891
Link: https://lists.gnu.org/archive/html/qemu-devel/2023-08/msg02726.html
Fixes: 9ac06df8b6 ("virtio-gpu-udmabuf: correct naming of QemuDmaBuf size properties")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
Add three new vhost-user protocol
`VHOST_USER_BACKEND_SHARED_OBJECT_* messages`.
These new messages are sent from vhost-user
back-ends to interact with the virtio-dmabuf
table in order to add or remove themselves as
virtio exporters, or lookup for virtio dma-buf
shared objects.
The action taken in the front-end depends
on the type stored in the virtio shared
object hash table.
When the table holds a pointer to a vhost
backend for a given UUID, the front-end sends
a VHOST_USER_GET_SHARED_OBJECT to the
backend holding the shared object.
The messages can only be sent after successfully
negotiating a new VHOST_USER_PROTOCOL_F_SHARED_OBJECT
vhost-user protocol feature bit.
Finally, refactor code to send response message so
that all common parts both for the common REPLY_ACK
case, and other data responses, can call it and
avoid code repetition.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-4-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This API manages objects (in this iteration,
dmabuf fds) that can be shared along different
virtio devices, associated to a UUID.
The API allows the different devices to add,
remove and/or retrieve the objects by simply
invoking the public functions that reside in the
virtio-dmabuf file.
For vhost backends, the API stores the pointer
to the backend holding the object.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-3-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'next' was converted from a local variable to an output parameter
in commit:
412e0e81b1 ("virtio: handle virtqueue_read_next_desc() errors")
But all the actual uses of the 'i/next' as an output were removed a few
months prior in commit:
aa570d6fb6 ("virtio: combine the read of a descriptor")
Remove the unused argument to simplify the code.
Also, adding a comment to the function to describe what it is actually
doing, as it is not obvious that the 'desc' is both an input and an
output argument.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927140016.2317404-3-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was supposed to be a compiler barrier and it was a compiler barrier
initially called 'wmb' when virtio core support was introduced.
Later all the instances of 'wmb' were switched to smp_wmb to fix memory
ordering issues on non-x86 platforms. However, this one doesn't need
to be an actual barrier, as its only purpose was to ensure that the
value is not read twice.
And since commit aa570d6fb6 ("virtio: combine the read of a descriptor")
there is no need for a barrier at all, since we're no longer reading
guest memory here, but accessing a local structure.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927140016.2317404-2-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We do not need the most up to date number of heads, we only want to
know if there is at least one.
Use shadow variable as long as it is not equal to the last available
index checked. This avoids expensive qatomic dereference of the
RCU-protected memory region cache as well as the memory access itself.
The change improves performance of the af-xdp network backend by 2-3%.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230927135157.2316982-1-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
local_err must be NULL before calling object_property_set_bool(), so we
must clear it on each iteration. Let's also use more convenient
error_reportf_err().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230925194040.68592-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
