if KVM is enabled and KVM capabilities MMU radix is available,
the partition table entry (patb_entry) for the radix mode is
initialized by default in ppc_spapr_reset().
It's a problem if we want to migrate the guest to a POWER8 host
while the kernel is not started to set the value to the one
expected for a POWER8 CPU.
The "-machine max-cpu-compat=power8" should allow to migrate
a POWER9 KVM host to a POWER8 KVM host, but because patb_entry
is set, the destination QEMU tries to enable radix mode on the
POWER8 host. This fails and cancels the migration:
Process table config unsupported by the host
error while loading state for instance 0x0 of device 'spapr'
load of migration failed: Invalid argument
This patch doesn't set the PATB entry if the user provides
a CPU compatibility mode that doesn't support radix mode.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We conditionally adjust part of the guest device tree based on the
global msi_nonbroken flag. However, the main machine type code
initializes msi_nonbroken to true and there's nothing that would set
it to false again.
So replace the test with an assert().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Machine objects have two init functions - the generic QOM level
instance_init which should only do static object initialization, and
the Machine specific MachineClass::init which does the actual
construction of the machine.
In spapr the functions implementing these two have names -
ppc_machine_initfn() and ppc_spapr_init() - which don't correspond closely
to either of those. To prevent people (read, me) from confusing which is
which, rename them spapr_instance_init() and spapr_machine_init() to
make it clearer which is which.
While we're there rename ppc_spapr_reset() to spapr_machine_reset() to
match.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
and use them in a couple of obvious places. Other macros will be used
in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to LoPAPR 1.1 B.6.12, the "/event-sources" node has an "interrupt-
ranges" property, the format of which is described in B.6.9.1.2 as follows:
“interrupt-ranges”
Standard property name that defines the interrupt number(s) and range(s)
handled by this unit.
prop-encoded-array: List of (int-number, range) specifications.
Int-number is encoded as with encode-int.
Range is encoded as with encode-int.
The first entry in this list shall contain the int-number associated with
the first “reg” property entry. The int-num-ber is the value representing
the interrupt source as would appear in the PowerPC External Interrupt
Architecture XISR. The range shall be the number of sequential interrupt
numbers which this unit can generate.
There's no such thing as a cell count at the end of the array, like the
one introduced by commit ffbb1705a3 in QEMU 2.8. It doesn't seem it had
any impact on existing guests and I couldn't find any related workaround
in linux. So, let's just drop the bogus lines.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LoPAPR 1.1 B.6.9.1.2 describes the "#interrupt-cells" property of the
PowerPC External Interrupt Source Controller node as follows:
“#interrupt-cells”
Standard property name to define the number of cells in an interrupt-
specifier within an interrupt domain.
prop-encoded-array: An integer, encoded as with encode-int, that denotes
the number of cells required to represent an interrupt specifier in its
child nodes.
The value of this property for the PowerPC External Interrupt option shall
be 2. Thus all interrupt specifiers (as used in the standard “interrupts”
property) shall consist of two cells, each containing an integer encoded
as with encode-int. The first integer represents the interrupt number the
second integer is the trigger code: 0 for edge triggered, 1 for level
triggered.
This patch fixes the interrupt specifiers in the "interrupt-map" property
of the PHB node, that were setting the second cell to 8 (confusion with
IRQ_TYPE_LEVEL_LOW ?) instead of 1.
VIO devices and RTAS event sources use the same format for interrupt
specifiers: while here, we introduce a common helper to handle the
encoding details.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
--
v3: - reference public LoPAPR instead of internal PAPR+ in changelog
- change helper name to spapr_dt_xics_irq()
v2: - drop the erroneous changes to the "interrupts" prop in PCI device nodes
- introduce a common helper to encode interrupt specifiers
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SPAPR is the last user of numa_get_node() and a bunch of
supporting code to maintain numa_info[x].addr list.
Get LMB node id from pc-dimm list, which allows to
remove ~80LOC maintaining dynamic address range
lookup list.
It also removes pc-dimm dependency on numa_[un]set_mem_node_id()
and makes pc-dimms a sole source of information about which
node it belongs to and removes duplicate data from global
numa_info.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_get_qirq() is only used by the sPAPR machine. Let's move it there
and change its name to reflect its scope. It will be useful for XIVE
support which will use its own set of qirqs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will make synchronisation easier with the XIVE interrupt mode when
available. The 'irq' parameter refers to the global IRQ number space.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also change the prototype to use a sPAPRMachineState and prefix them
with spapr_irq_. It will let us synchronise the IRQ allocation with
the XIVE interrupt mode when available.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'intc' pointer of the CPU references the interrupt presenter in
the XICS interrupt mode. When the XIVE interrupt mode is available and
activated, the machine will need to reassign this pointer to reflect
the change.
Moving this assignment under the realize routine of the CPU will ease
the process when the interrupt mode is toggled.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR and the PowerNV core objects create the interrupt presenter
object of the CPUs in a very similar way. Let's provide a common
routine in which we use the presenter 'type' as a child identifier.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is stopped with the 'stop-self' RTAS call, its state
'halted' is switched to 1 and, in this case, the MSR is not taken into
account anymore in the cpu_has_work() routine. Only the pending
hardware interrupts are checked with their LPCR:PECE* enablement bit.
The CPU is now also protected from the decrementer interrupt by the
LPCR:PECE* bits which are disabled in the 'stop-self' RTAS
call. Reseting the MSR is pointless.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Just like for hot unplug CPUs, when a guest is rebooted, the secondary
CPUs can be awaken by the decrementer and start entering SLOF at the
same time the boot CPU is.
To be safe, let's disable on the secondaries all the exceptions which
can cause an exit while the CPU is in power-saving mode.
Based on previous work from Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is stopped with the 'stop-self' RTAS call, its state
'halted' is switched to 1 and, in this case, the MSR is not taken into
account anymore in the cpu_has_work() routine. Only the pending
hardware interrupts are checked with their LPCR:PECE* enablement bit.
If the DECR timer fires after 'stop-self' is called and before the CPU
'stop' state is reached, the nearly-dead CPU will have some work to do
and the guest will crash. This case happens very frequently with the
not yet upstream P9 XIVE exploitation mode. In XICS mode, the DECR is
occasionally fired but after 'stop' state, so no work is to be done
and the guest survives.
I suspect there is a race between the QEMU mainloop triggering the
timers and the TCG CPU thread but I could not quite identify the root
cause. To be safe, let's disable in the LPCR all the exceptions which
can cause an exit while the CPU is in power-saving mode and reenable
them when the CPU is started.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Correct some confusion wrt. the PCI facing
side of the PCI host bridge (not PCIe root complex).
The ref. manual for the mpc8533 (as well as
mpc8540 and mpc8540) give the class code as
PCI_CLASS_PROCESSOR_POWERPC.
While the PCI_HEADER_TYPE field is oddly omitted,
the tables in the "PCI Configuration Header"
section shows a type 0 layout using all 6 BAR
registers (as 2x 32, and 2x 64 bit regions)
So 997505065d
seems to be in error. Although there was
perhaps some confusion as the mpc8533
has a separate PCIe root complex.
With PCIe, a root complex has PCI_HEADER_TYPE=1.
Neither the PCI host bridge, nor the PCIe
root complex advertise class PCI_CLASS_BRIDGE_PCI.
This was confusing Linux guests, which try
to interpret the host bridge as a pci-pci
bridge, but get confused and re-enumerate
the bus when the primary/secondary/subordinate
bus registers don't have valid values.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace *printf() with *_report().
Remove trailing new lines.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and use the value to define precisely the default value of the LPCR in
the helper routine cpu_ppc_set_papr()
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code assumes that only the CPU core object holds a
reference on each individual CPU object, and happily frees their
allocated memory when the core is unrealized. This is dangerous
as some other code can legitimely keep a pointer to a CPU if it
calls object_ref(), but it would end up with a dangling pointer.
Let's allocate all CPUs with object_new() and let QOM free them
when their reference count reaches zero. This greatly simplify the
code as we don't have to fiddle with the instance size anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While we're at it fix a couple of small errors in the 2.11 and 2.10 models
(they didn't have any real effect, but don't quite match the template).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The previous code section uses a 'first < 0' test and returns. Therefore,
there is no need to test the 'first' variable against '>= 0' afterwards.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* xilinx_spips: set reset values correctly
* MAINTAINERS: fix an email address
* hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
* nvic: Make systick banked for v8M
* refactor get_phys_addr() so we can return the right format PAR
for ATS operations
* implement v8M TT instruction
* fix some minor v8M bugs
* Implement reset for GICv3 ITS
* xlnx-zcu102: Add support for the ZynqMP QSPI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1EF9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20171213' into staging
target-arm queue:
* xilinx_spips: set reset values correctly
* MAINTAINERS: fix an email address
* hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
* nvic: Make systick banked for v8M
* refactor get_phys_addr() so we can return the right format PAR
for ATS operations
* implement v8M TT instruction
* fix some minor v8M bugs
* Implement reset for GICv3 ITS
* xlnx-zcu102: Add support for the ZynqMP QSPI
# gpg: Signature made Wed 13 Dec 2017 18:01:31 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20171213: (43 commits)
xilinx_spips: Use memset instead of a for loop to zero registers
xilinx_spips: Set all of the reset values
xilinx_spips: Update the QSPI Mod ID reset value
MAINTAINERS: replace the unavailable email address
hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
nvic: Make systick banked
nvic: Make nvic_sysreg_ns_ops work with any MemoryRegion
target/arm: Extend PAR format determination
target/arm: Remove fsr argument from get_phys_addr() and arm_tlb_fill()
target/arm: Ignore fsr from get_phys_addr() in do_ats_write()
target/arm: Use ARMMMUFaultInfo in deliver_fault()
target/arm: Convert get_phys_addr_pmsav8() to not return FSC values
target/arm: Convert get_phys_addr_pmsav7() to not return FSC values
target/arm: Convert get_phys_addr_pmsav5() to not return FSC values
target/arm: Convert get_phys_addr_lpae() to not return FSC values
target/arm: Convert get_phys_addr_v6() to not return FSC values
target/arm: Convert get_phys_addr_v5() to not return FSC values
target/arm: Remove fsr argument from arm_ld*_ptw()
target/arm: Provide fault type enum and FSR conversion functions
target/arm: Implement TT instruction
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide HMP monitor command execution result as it would be seen
by user who established an HMP monitor session.
Currently many commands may silently fail without any sign of that.
This patch let this info to be printed once test is running in
verbose mode.
For the future it might be useful to fail the test if command has
failed, however it would require a bit of rework inside test
engine itself.
A simple example of silent failure without reporting it would to
add some non-existent HMP command into 'hmp_cmds' list. In this case
test will report it successfully passed without error.
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20171023151310.6462-5-vadim.galitsyn@profitbricks.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's easy to use device_add and device_del as replacement instead.
The usb_add and usb_del commands are deprecated since QEMU 2.10,
and nobody complained that they are still needed, so let's get rid
of them now to make the HMP interface a little bit less overloaded.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use memset() instead of a for loop to zero all of the registers.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c076e907f355923864cb1afde31b938ffb677778.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following the ZynqMP register spec let's ensure that all reset values
are set.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 19836f3e0a298b13343c5a59c87425355e7fd8bd.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the reset value to match the latest ZynqMP register spec.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c03e51d041db7f055596084891aeb1e856e32b9f.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since I'm not working as an assignee in Linaro, replace the Linaro email
address with my personal one.
Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Message-id: 1513058845-9768-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ctz32() routine could return a value greater than
TC6393XB_GPIOS=16, because the device has 24 GPIO level
bits but we only implement 16 outgoing lines. This could
lead to an OOB array access. Mask 'level' to avoid it.
Reported-by: Moguofang <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171212041539.25700-1-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the v8M security extension, there should be two systick
devices, which use separate banked systick exceptions. The
register interface is banked in the same way as for other
banked registers, including the existence of an NS alias
region for secure code to access the nonsecure timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-3-git-send-email-peter.maydell@linaro.org
Generalize nvic_sysreg_ns_ops so that we can pass it an
arbitrary MemoryRegion which it will use as the underlying
register implementation to apply the NS-alias behaviour
to. We'll want this so we can do the same with systick.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-2-git-send-email-peter.maydell@linaro.org
Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1512503192-2239-13-git-send-email-peter.maydell@linaro.org
[PMM: Rebased Edgar's patch on top of get_phys_addr() refactoring;
use arm_s1_regime_using_lpae_format() rather than
regime_using_lpae_format() because the latter will assert
if passed ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1;
updated commit message appropriately]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-12-git-send-email-peter.maydell@linaro.org
In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.
For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-11-git-send-email-peter.maydell@linaro.org
Now that ARMMMUFaultInfo is guaranteed to have enough information
to construct a fault status code, we can pass it in to the
deliver_fault() function and let it generate the correct type
of FSR for the destination, rather than relying on the value
provided by get_phys_addr().
I don't think there are any cases the old code was getting
wrong, but this is more obviously correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-10-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-9-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-8-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-7-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-6-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-5-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-4-git-send-email-peter.maydell@linaro.org
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.
Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-3-git-send-email-peter.maydell@linaro.org
Currently get_phys_addr() and its various subfunctions return
a hard-coded fault status register value for translation
failures. This is awkward because FSR values these days may
be either long-descriptor format or short-descriptor format.
Worse, the right FSR type to use doesn't depend only on the
translation table being walked -- some cases, like fault
info reported to AArch32 EL2 for some kinds of ATS operation,
must be in long-descriptor format even if the translation
table being walked was short format. We can't get those cases
right with our current approach.
Provide fields in the ARMMMUFaultInfo struct which allow
get_phys_addr() to provide sufficient information for a caller to
construct an FSR value themselves, and utility functions which do
this for both long and short format FSR values, as a first step in
switching get_phys_addr() and its children to only returning the
failure cause in the ARMMMUFaultInfo struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-2-git-send-email-peter.maydell@linaro.org
Implement the TT instruction which queries the security
state and access permissions of a memory location.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-8-git-send-email-peter.maydell@linaro.org
For the TT instruction we're going to need to do an MPU lookup that
also tells us which MPU region the access hit. This requires us
to do the MPU lookup without first doing the SAU security access
check, so pull the MPU lookup parts of get_phys_addr_pmsav8()
out into their own function.
The TT instruction also needs to know the MPU region number which
the lookup hit, so provide this information to the caller of the
MPU lookup code, even though get_phys_addr_pmsav8() doesn't
need to know it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-7-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
