Sometimes it would be good to be able to read the pin number along
with the IRQ number allocated. Since we'll dump the IRQ number, no
reason to not dump the pin information. For example, the vfio-pci
device will overwrite the pin with the hardware pin number. It would
be nice to know the pin number of one assigned device from QMP/HMP.
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
CC: Julia Suvorova <jusual@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200317195908.283800-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
The ‘enable’ parameter to the vhost_migration_log() function is given as
an int, but "true"/"false" values are passed in wherever it is invoked.
Inside the function itself it is only ever compared with bool values.
Therefore the parameter value itself should be changed to bool.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <CAFubqFtqNZw=Y-ar3N=3zTQi6LkKg_G-7W7OOHHbE7Y1fV7HAQ@mail.gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename memory region and callbacks and ops to carry "evt" in the name
because a second region will be added shortly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200520132003.9492-10-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedow <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add fields to struct AcpiFadtData and update build_fadt() to properly
generate sleep register entries.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-9-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed for microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200520132003.9492-8-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We'll need madt support for microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-7-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove PCMachineState dependency from build_madt().
Pass AcpiDeviceIf as separate argument instead of
depending on PCMachineState->acpi_dev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the PCI version of vhost-user-vsock
Launch QEMU like this:
qemu -chardev socket,path=/tmp/vm.vsock,id=chr0 \
-device vhost-user-vsock-pci,chardev=chr0
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200522122512.87413-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a vhost-user device for vsock, using the
vhost-vsock-common parent class.
The vhost-user-vsock device can be used to implement the virtio-vsock
device emulation in user-space.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200522122512.87413-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch prepares the introduction of vhost-user-vsock, moving
the common code usable for both vhost-vsock and vhost-user-vsock
devices, in the new vhost-vsock-common parent class.
While moving the code, fixed checkpatch warnings about block comments.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200522122512.87413-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU currently aborts when being started with "-nic model=rocker" or with
"-net nic,model=rocker". This happens because the "rocker" device is not
a normal NIC but a switch, which has different properties. Thus we should
only consider real NIC devices for "-nic" and "-net". These devices can
be identified by the "netdev" property, so check for this property before
adding the device to the list.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 52310c3fa7 ("net: allow using any PCI NICs in -net or -nic")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200527153152.9211-1-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Historically, sending all memory regions to vhost-user backends in a
single message imposed a limitation on the number of times memory
could be hot-added to a VM with a vhost-user device. Now that backends
which support the VHOST_USER_PROTOCOL_F_CONFIGURE_SLOTS send memory
regions individually, we no longer need to impose this limitation on
devices which support this feature.
With this change, VMs with a vhost-user device which supports the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS can support a configurable
number of memory slots, up to the maximum allowed by the target
platform.
Existing backends which do not support
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com>
Suggested-by: Mike Cui <cui@nutanix.com>
Message-Id: <1588533678-23450-6-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With this change, when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
protocol feature has been negotiated, Qemu no longer sends the backend
all the memory regions in a single message. Rather, when the memory
tables are set or updated, a series of VHOST_USER_ADD_MEM_REG and
VHOST_USER_REM_MEM_REG messages are sent to transmit the regions to map
and/or unmap instead of sending send all the regions in one fixed size
VHOST_USER_SET_MEM_TABLE message.
The vhost_user struct maintains a shadow state of the VM’s memory
regions. When the memory tables are modified, the
vhost_user_set_mem_table() function compares the new device memory state
to the shadow state and only sends regions which need to be unmapped or
mapped in. The regions which must be unmapped are sent first, followed
by the new regions to be mapped in. After all the messages have been
sent, the shadow state is set to the current virtual device state.
Existing backends which do not support
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com>
Suggested-by: Mike Cui <cui@nutanix.com>
Message-Id: <1588533678-23450-5-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This change introduces a new feature to the vhost-user protocol allowing
a backend device to specify the maximum number of ram slots it supports.
At this point, the value returned by the backend will be capped at the
maximum number of ram slots which can be supported by vhost-user, which
is currently set to 8 because of underlying protocol limitations.
The returned value will be stored inside the VhostUserState struct so
that on device reconnect we can verify that the ram slot limitation
has not decreased since the last time the device connected.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com>
Message-Id: <1588533678-23450-4-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When setting the memory tables, qemu uses a memory region's userspace
address to look up the region's MemoryRegion struct. Among other things,
the MemoryRegion contains the region's offset and associated file
descriptor, all of which need to be sent to the backend.
With VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS, this logic will be
needed in multiple places, so before feature support is added it
should be moved to a helper function.
This helper is also used to simplify the vhost_user_can_merge()
function.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-3-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When setting vhost-user memory tables, memory region descriptors must be
copied from the vhost_dev struct to the vhost-user message. To avoid
duplicating code in setting the memory tables, we should use a helper to
populate this field. This change adds this helper.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1588533678-23450-2-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
A socket write during vhost-user communication may trigger a disconnect
event, calling vhost_user_blk_disconnect() and clearing all the
vhost_dev structures holding data that vhost-user functions expect to
remain valid to roll back initialization correctly. Delay the cleanup to
keep vhost_dev structure valid.
There are two possible states to handle:
1. RUN_STATE_PRELAUNCH: skip bh oneshot call and perform disconnect in
the caller routine.
2. RUN_STATE_RUNNING: delay by using bh
BH changes are based on the similar changes for the vhost-user-net
device:
commit e7c83a885f
"vhost-user: delay vhost_user_stop"
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Message-Id: <69b73b94dcd066065595266c852810e0863a0895.1590396396.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
IEC binary prefixes ease code review: the unit is explicit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-6-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-5-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
memory_region_set_size() handle the 16 Exabytes limit by
special-casing the UINT64_MAX value. This is not a problem
for the 32-bit maximum, 4 GiB.
By using the UINT32_MAX value, the pci_bridge_io MemoryRegion
ends up missing 1 byte:
(qemu) info mtree
memory-region: pci_bridge_io
0000000000000000-00000000fffffffe (prio 0, i/o): pci_bridge_io
0000000000000060-0000000000000060 (prio 0, i/o): i8042-data
0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd
00000000000001ce-00000000000001d1 (prio 0, i/o): vbe
0000000000000378-000000000000037f (prio 0, i/o): parallel
00000000000003b4-00000000000003b5 (prio 0, i/o): vga
...
Fix by using the correct value. We now have:
memory-region: pci_bridge_io
0000000000000000-00000000ffffffff (prio 0, i/o): pci_bridge_io
0000000000000060-0000000000000060 (prio 0, i/o): i8042-data
0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd
...
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-4-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
memory_region_set_size() handle the 16 Exabytes limit by
special-casing the UINT64_MAX value. This is not a problem
for the 32-bit maximum, 4 GiB.
By using the UINT32_MAX value, the bm-raven MemoryRegion
ends up missing 1 byte:
$ qemu-system-ppc -M prep -S -monitor stdio -usb
memory-region: bm-raven
0000000000000000-00000000fffffffe (prio 0, i/o): bm-raven
0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff
0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff
Fix by using the correct value. We now have:
memory-region: bm-raven
0000000000000000-00000000ffffffff (prio 0, i/o): bm-raven
0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff
0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-3-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
While accessing PCI configuration bytes, assert that
'address + len' is within PCI configuration space.
Generally it is within bounds. This is more of a defensive
assert, in case a buggy device was to send 'address' which
may go out of bounds.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200604113525.58898-1-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check for hot plug capability earlier to avoid removing devices attached
during the initialization process.
Run qemu with an unattached drive:
-drive file=$FILE,if=none,id=drive0 \
-device pcie-root-port,id=rp0,slot=3,bus=pcie.0,hotplug=off
Hotplug a block device:
device_add virtio-blk-pci,id=blk0,drive=drive0,bus=rp0
If hotplug fails on plug_cb, drive0 will be deleted.
Fixes: 0501e1aa1d ("hw/pci/pcie: Forbid hot-plug if it's disabled on the slot")
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20200604125947.881210-1-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for free page reporting. The idea is to function very similar
to how the balloon works in that we basically end up madvising the page as
not being used. However we don't really need to bother with any deflate
type logic since the page will be faulted back into the guest when it is
read or written to.
This provides a new way of letting the guest proactively report free
pages to the hypervisor, so the hypervisor can reuse them. In contrast to
inflate/deflate that is triggered via the hypervisor explicitly.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041407.12700.73735.stgit@localhost.localdomain>
We need to make certain to advertise support for page poison reporting if
we want to actually get data on if the guest will be poisoning pages.
Add a value for reporting the poison value being used if page poisoning is
enabled in the guest. With this we can determine if we will need to skip
free page reporting when it is enabled in the future.
The value currently has no impact on existing balloon interfaces. In the
case of existing balloon interfaces the onus is on the guest driver to
reapply whatever poison is in place.
When we add free page reporting the poison value is used to determine if
we can perform in-place page reporting. The expectation is that a reported
page will already contain the value specified by the poison, and the
reporting of the page should not change that value.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041400.12700.33251.stgit@localhost.localdomain>
We took a reference when realizing, so let's drop that reference when
unrealizing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: c13c4153f7 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Checking against guest features is wrong. We allocated data structures
based on host features. We can rely on "free_page_bh" as an indicator
whether to un-do stuff instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: c13c4153f7 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case we don't have an iothread, we mark the feature as abscent but
still add the queue. 'free_page_bh' remains set to NULL.
qemu-system-i386 \
-M microvm \
-nographic \
-device virtio-balloon-device,free-page-hint=true \
-nographic \
-display none \
-monitor none \
-serial none \
-qtest stdio
Doing a "write 0xc0000e30 0x24
0x030000000300000003000000030000000300000003000000030000000300000003000000"
We will trigger a SEGFAULT. Let's move the check and bail out.
While at it, move the static initializations to instance_init().
free_page_report_status and block_iothread are implicitly set to the
right values (0/false) already, so drop the initialization.
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: c13c4153f7 ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to build the TPM2 table on ARM too. In order to reuse the
generation code, let's move build_tpm2() to aml-build.c.
No change in the implementation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation of its move to the generic acpi code,
let's convert build_tpm2() to use build_append API. This
latter now is prefered in place of direct ACPI struct field
settings with manual endianness conversion.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Do not build a TCPA table for TPM 2 anymore but create the log area when
building the TPM2 table. The TCPA table is only needed for TPM 1.2.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Also adds support for multiple LPT devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-8-kraxel@redhat.com>
The _STA method dates back to the days where we had a static DSDT. The
device is listed in the DSDT table unconditionally and the _STA method
checks a bit in the isa bridge pci config space to figure whenever a
given is isa device is present or not, then evaluates to 0x0f (present)
or 0x00 (absent).
These days the DSDT is generated by qemu anyway, so if a device is not
present we can simply drop it from the DSDT instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200515150421.25479-7-kraxel@redhat.com>
The code uses the isa_serial_io array to figure what the device uid is.
Side effect is that acpi antries are not limited to port 1+2 any more,
we'll also get entries for ports 3+4.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-6-kraxel@redhat.com>
The _STA method dates back to the days where we had a static DSDT. The
device is listed in the DSDT table unconditionally and the _STA method
checks a bit in the isa bridge pci config space to figure whenever a
given is isa device is present or not, then evaluates to 0x0f (present)
or 0x00 (absent).
These days the DSDT is generated by qemu anyway, so if a device is not
present we can simply drop it from the DSDT instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-5-kraxel@redhat.com>
Use a single io range for _CRS instead of two,
following what real hardware does.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200515150421.25479-4-kraxel@redhat.com>
NVDIMMs can belong to their own proximity domains, as described by the
NFIT. In such cases, the SRAT needs to have Memory Affinity structures
in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node
data structures properly during NUMA initialization. See the following
for an example failure case.
https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/
Introduce a new helper, nvdimm_build_srat(), and call it for both the
i386 and arm versions of 'build_srat()' to augment the SRAT with
memory affinity information for NVDIMMs.
The relevant command line options to exercise this are below. Nodes 0-1
contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address
space.
-object memory-backend-ram,id=mem0,size=2048M
-numa node,nodeid=0,memdev=mem0,
-numa cpu,node-id=0,socket-id=0
-object memory-backend-ram,id=mem1,size=2048M
-numa node,nodeid=1,memdev=mem1,
-numa cpu,node-id=1,socket-id=1
-numa node,nodeid=2,
-object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G
-device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2
-numa node,nodeid=3,
-object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G
-device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI spec says:
For all accesses to MSI-X Table and MSI-X PBA fields, software must use
aligned full DWORD or aligned full QWORD transactions; otherwise, the
result is undefined.
However, since MSI-X was converted to use memory API, QEMU
started blocking qword transactions, only allowing DWORD
ones. Guests do not seem to use QWORD accesses, but let's
be spec compliant.
Fixes: 95524ae8dc ("msix: convert to memory API")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wire the dwc-hsotg (dwc2) emulation into Qemu
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-7-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dwc-hsotg (dwc2) USB host depends on a short packet to
indicate the end of an IN transfer. The usb-storage driver
currently doesn't provide this, so fix it.
I have tested this change rather extensively using a PC
emulation with xhci, ehci, and uhci controllers, and have
not observed any regressions.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-6-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.
Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.
Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.
I have used some on-line sources of information while developing
this emulation, including:
http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.
https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.
Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller state definitions.
Mostly based on hw/usb/hcd-ehci.h.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-4-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC region size is 256B, split as:
- [0x00 - 0x4f] defined
- [0x50 - 0xff] reserved
All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.
This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.
See:
'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".
Reported-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603055915.17678-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
