Now that the groundwork has been laid, enabling CF_PCREL within the
translator proper is a simple matter of updating copy_iaoq_entry
and install_iaq_entries.
We also need to modify the unwind info, since we no longer have
absolute addresses to install.
As expected, this reduces the runtime overhead of compilation when
running a Linux kernel with address space randomization enabled.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not compile in the priv change based on the first translation;
look up the PTE at execution time. This is required for CF_PCREL,
where a page may be mapped multiple times with different attributes.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return-by-reference is never used.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use PAGE_WRITE_INV to temporarily enable write permission
on for a given page, driven by PSW_X being set.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PSW_B causes B,GATE to trap as an illegal instruction, removing our
previous sequential execution test that was merely an approximation.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PSW_X is cleared after every instruction, and only set by RFI.
PSW_B is cleared after every non-branch, or branch not taken,
and only set by taken branches. We can clear both bits with a
single store, at most once per TB. Taken branches set PSW_B,
at most once per TB.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generally, both of these bits are cleared at the end of each
instruction. By separating these, we will be able to clear
both with a single insn, instead of 2 or 3.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Print both raw IAQ_Front and IAQ_Back as well as the GVAs.
Print control registers in system mode.
Print floating point registers if CPU_DUMP_FPU.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As with loads and stores, code offsets are kept intact until the
full gva is formed. In qemu, this is in cpu_get_tb_cpu_state.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for CF_PCREL. store the iaoq_f in 3 parts: high
bits in cs_base, middle bits in pc, and low bits in priv.
For iaoq_b, set a bit for either of space or page differing,
else the page offset.
Install iaq entries before goto_tb. The change to not record
the full direct branch difference in TB means that we have to
store at least iaoq_b before goto_tb. But since a later change
to enable CF_PCREL will require both iaoq_f and iaoq_b to be
updated before goto_tb, go ahead and update both fields now.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel does this along the return path to user mode.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow an exception to be emitted at the end of the TranslationBlock,
leaving only the conditional branch inline. Use it for simple
exception instructions like break, which happen to be nullified.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we do not need to free tcg temporaries, the only
thing cond_free does is reset the condition to never.
Instead, simply write a new condition over the old, which
may be simply cond_make_f() for the never condition.
The do_*_cond functions do the right thing with c or cf == 0,
so there's no need for a special case anymore.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define all of the context dependent field definitions.
Use FIELD_EX32 and FIELD_DP32 with named fields instead
of extract32 and deposit32 with raw constants.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can directly test bits of a 32-bit comparison without
zero or sign-extending an intermediate result.
We can directly test bit 0 for odd/even.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use 'v' for a variable that needs copying, 't' for a temp that
doesn't need copying, and 'i' for an immediate, and use this
naming for both arguments of the comparison. So:
cond_make_tmp -> cond_make_tt
cond_make_0_tmp -> cond_make_ti
cond_make_0 -> cond_make_vi
cond_make -> cond_make_vv
Pass 0 explictly, rather than implicitly in the function name.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a first step in enabling CF_PCREL, but for now
we regenerate the absolute address before writeback.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap offset and space together in one structure, ensuring
that they're copied together as required.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This simplifies callers, which might otherwise have
to make another copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using umax is clearer than the same operation using movcond.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows unification of BE, BLR, BV, BVE with a common helper.
Since we can now track space with IAQ_Next, we can now let the
TranslationBlock continue across the delay slot with BE, BVE.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move space assighments to a central location.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add variable to track space changes to IAQ. So far, no such changes
are introduced, but the new checks vs ctx->iasq_b may eliminate an
unnecessary copy to cpu_iasq_f with e.g. BLR.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the amount of code in hppa_tr_translate_insn advancing the
insn queue for the next insn. Move the goto_tb path to hppa_tr_tb_stop.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We no longer have to allocate a temp and perform an
addition before translation of the rest of the insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a common routine for writing the return address.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of two separate cpu_iaoq_entry calls, use one call to update
both IAQ_Front and IAQ_Back. Simplify with an argument combination
that automatically handles a simple increment from Front to Back.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The generic tcg driver will have already checked for breakpoints.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the function by not attempting a conditional move
on the branch destination -- just use nullify_over normally.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass a displacement instead of an absolute value.
In trans_be, remove the user-only do_dbranch case. The branch we are
attempting to optimize is to the zero page, which is perforce on a
different page than the code currently executing, which means that
we will *not* use a goto_tb. Use a plain indirect branch instead,
which is what we got out of the attempted direct branch anyway.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Share this check between gen_goto_tb and hppa_tr_translate_insn.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is for log_pc(), which needs to produce a
similar result to cpu_get_tb_cpu_state().
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Bump minimum glib version and use URI code from the newer glib
* Fix error message from "configure" when C compiler is not working
-----BEGIN PGP SIGNATURE-----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=VRHz
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-05-14' of https://gitlab.com/thuth/qemu into staging
* Fix the "tsan-build" CI job on the shared gitlab CI runners
* Bump minimum glib version and use URI code from the newer glib
* Fix error message from "configure" when C compiler is not working
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmZDXcYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVPJw//bK/NuMKOHlnwgowkQ/x41t8nc0jAR38+
# aMhJBTSB+9EOlPd+/y7+IeFlD9lS2JzoX/CWeBrNlKc6juWQahABJYcvscmdGiYr
# a/dUy9iZoqJyY220TMjCWYwORRtNqPDXaiUIR8hBZZBmW51xs1hRc3aazxPm6dOD
# cj1yFKwWGY5g72SkRNTMWi3qWX1tXNOh7sbuhWKkZ3eiRCllHb0RwrhA341ze4TI
# ckmlSA6stMjls4XNAIAKVdRKLPE1BsJ/UKxpnOEO3F640cbe69B0+z13wIBNfTOY
# Mk3zSjrdLY6thSY+2iOb2FLt3wC5QCBjyRluv+0kwdSnz6xsafEDWNx5VneZH+Iu
# ZQWLGvN4qUUBBqHKY8eWnrsij3ABXioHLK8eHj2JuHidcG15tku/1cwAJvy/8P/O
# iup0elZ3MXaAk6ce3dwYY4t6QecuzqX9cdJkTuRNlzysK1xKQdBiYTdeZikfUAoM
# InuFUh732yPXDSiZcG+uMXUTAJXHWASr7bvPydDx/gL1tYGYBqYepfPF2uWYfNwg
# VZRgsN6WVDBGPyXv8Z7eQ9lye5JoAGYrSDxZE87q8RwRV5holiYDxtf10zeLz3Wf
# RI5L/bb2eFSHzi3quzOC1uLflLqNKwq+9UZEjdLv2z8zuhwVwxbcDV9+ox6zA8zi
# dnVC3Yp/3ik=
# =VRHz
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 May 2024 02:49:10 PM CEST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-05-14' of https://gitlab.com/thuth/qemu:
util/uri: Remove the old URI parsing code
block/ssh: Use URI parsing code from glib
block/nfs: Use URI parsing code from glib
block/nbd: Use URI parsing code from glib
block/gluster: Use URI parsing code from glib
Remove glib compatibility code that is not required anymore
Bump minimum glib version to v2.66
gitlab: use 'setarch -R' to workaround tsan bug
gitlab: use $MAKE instead of 'make'
dockerfiles: add 'MAKE' env variable to remaining containers
configure: Fix error message when C compiler is not working
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we switched all consumers of the URI code to use the URI
parsing functions from glib instead, we can remove our internal
URI parsing code since it is not used anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-14-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
While we're at it, also emit a warning when encountering unknown
parameters in the URI, so that the users have a chance to detect
their typos or other mistakes.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-ID: <20240418101056.302103-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
While we're at it, slightly rephrase one of the error messages:
Use "Invalid value..." instead of "Illegal value..." since the
latter rather sounds like the users were breaking a law here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter. The g_uri_get_host() also takes care
of removing the square brackets from IPv6 addresses, so we can
drop that part of the QEMU code now, too.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
Since g_uri_get_path() returns a const pointer, we also need to
tweak the parameter of parse_volume_options() (where we use the
result of g_uri_get_path() as input).
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240418101056.302103-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we bumped the minimum glib version to 2.66, we can drop
the old code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we dropped support for CentOS 8 and Ubuntu 20.04, we can
look into bumping the glib version to a new minimum for further
clean-ups. According to repology.org, available versions are:
CentOS Stream 9: 2.66.7
Debian 11: 2.66.8
Fedora 38: 2.74.1
Freebsd: 2.78.4
Homebrew: 2.80.0
Openbsd: 2.78.4
OpenSuse leap 15.5: 2.70.5
pkgsrc_current: 2.78.4
Ubuntu 22.04: 2.72.1
Thus it should be safe to bump the minimum glib version to 2.66 now.
Version 2.66 comes with new functions for URI parsing which will
allow further clean-ups in the following patches.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
