Serialized writes should be used in copy-on-write of backup(sync=none)
for image fleecing scheme.
We need to change an assert in bdrv_aligned_pwritev, added in
28de2dcd88. The assert may fail now, because call to
wait_serialising_requests here may become first call to it for this
request with serializing flag set. It occurs if the request is aligned
(otherwise, we should already set serializing flag before calling
bdrv_aligned_pwritev and correspondingly waited for all intersecting
requests). However, for aligned requests, we should not care about
outdating of previously read data, as there no such data. Therefore,
let's just update an assert to not care about aligned requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Here two things are fixed:
1. Architecture
On each recursion step, we go to the child of src or dst, only for one
of them. So, it's wrong to create tracked requests for both on each
step. It leads to tracked requests duplication.
2. Wait for serializing requests on write path independently of
BDRV_REQ_NO_SERIALISING
Before commit 9ded4a0114 "backup: Use copy offloading",
BDRV_REQ_NO_SERIALISING was used for only one case: read in
copy-on-write operation during backup. Also, the flag was handled only
on read path (in bdrv_co_preadv and bdrv_aligned_preadv).
After 9ded4a0114, flag is used for not waiting serializing operations
on backup target (in same case of copy-on-write operation). This
behavior change is unsubstantiated and potentially dangerous, let's
drop it and add additional asserts and documentation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows using the two constants outside of block.c, which will
happen in a subsequent patch.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This semantics is needed by drive-backup so implement it before using
this API there.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-3-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all callers of vectored I/O have been converted
to use our preferred byte-based bdrv_co_p{read,write}v(), we can
delete the unused bdrv_co_{read,write}v().
Furthermore, this gets rid of the signature difference between the
public bdrv_co_writev() and the callback .bdrv_co_writev (the
latter still exists, because some drivers still need more work
before they are fully byte-based).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_drain_all_*() used bdrv_next() to iterate over all root nodes and
did a subtree drain for each of them. This works fine as long as the
graph is static, but sadly, reality looks different.
If the graph changes so that root nodes are added or removed, we would
have to compensate for this. bdrv_next() returns each root node only
once even if it's the root node for multiple BlockBackends or for a
monitor-owned block driver tree, which would only complicate things.
The much easier and more obviously correct way is to fundamentally
change the way the functions work: Iterate over all BlockDriverStates,
no matter who owns them, and drain them individually. Compensation is
only necessary when a new BDS is created inside a drain_all section.
Removal of a BDS doesn't require any action because it's gone afterwards
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_do_drained_begin() is only safe if we have a single
BDRV_POLL_WHILE() after quiescing all affected nodes. We cannot allow
that parent callbacks introduce a nested polling loop that could cause
graph changes while we're traversing the graph.
Split off bdrv_do_drained_begin_quiesce(), which only quiesces a single
node without waiting for its requests to complete. These requests will
be waited for in the BDRV_POLL_WHILE() call down the call chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anything can happen inside BDRV_POLL_WHILE(), including graph
changes that may interfere with its callers (e.g. child list iteration
in recursive callers of bdrv_do_drained_begin).
Switch to a single BDRV_POLL_WHILE() call for the whole subtree at the
end of bdrv_do_drained_begin() to avoid such effects. The recursion
happens now inside the loop condition. As the graph can only change
between bdrv_drain_poll() calls, but not inside of it, doing the
recursion here is safe.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a useful function for the whole block layer, so make it public.
At the same time, users outside of block.c probably do not need to make
use of the reopen functionality, so rename the current function to
bdrv_is_writable_after_reopen() create a new bdrv_is_writable() function
that just passes NULL to it for the reopen queue.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Introduce the bdrv_co_copy_range() API for copy offloading. Block
drivers implementing this API support efficient copy operations that
avoid reading each block from the source device and writing it to the
destination devices. Examples of copy offload primitives are SCSI
EXTENDED COPY and Linux copy_file_range(2).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-2-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This flag signifies that a write request will not change the visible
disk content. With this flag set, it is sufficient to have the
BLK_PERM_WRITE_UNCHANGED permission instead of BLK_PERM_WRITE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-4-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently we never actually check whether the WRITE_UNCHANGED
permission has been taken for unchanging writes. But the one check that
is commented out checks both WRITE and WRITE_UNCHANGED; and considering
that WRITE_UNCHANGED is already documented as being weaker than WRITE,
we should probably explicitly document WRITE to include WRITE_UNCHANGED.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll use a separate source file for image creation, and we need to
check there whether the requested driver is whitelisted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of passing a separate BlockDriverState* into qcow2_co_create(),
make use of the BlockdevRef that is included in BlockdevCreateOptions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2axz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
BlockDriverState has the BDRV_POLL_WHILE() macro to wait on event loop
activity while a condition evaluates to true. This is used to implement
synchronous operations where it acts as a condvar between the IOThread
running the operation and the main loop waiting for the operation. It
can also be called from the thread that owns the AioContext and in that
case it's just a nested event loop.
BlockBackend needs this behavior but doesn't always have a
BlockDriverState it can use. This patch extracts BDRV_POLL_WHILE() into
the AioWait abstraction, which can be used with AioContext and isn't
tied to BlockDriverState anymore.
This feature could be built directly into AioContext but then all users
would kick the event loop even if they signal different conditions.
Imagine an AioContext with many BlockDriverStates, each time a request
completes any waiter would wake up and re-check their condition. It's
nicer to keep a separate AioWait object for each condition instead.
Please see "block/aio-wait.h" for details on the API.
The name AIO_WAIT_WHILE() avoids the confusion between AIO_POLL_WHILE()
and AioContext polling.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name aio_context_in_iothread() is misleading because it also returns
true when called on the main AioContext from the main loop thread, which
is not an IOThread.
This patch renames it to in_aio_context_home_thread() and expands the
doc comment to make the semantics clearer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that the block layer exposes byte-based allocation,
it's time to tackle the drivers. Add a new callback that operates
on as small as byte boundaries. Subsequent patches will then update
individual drivers, then finally remove .bdrv_co_get_block_status().
The new code also passes through the 'want_zero' hint, which will
allow subsequent patches to further optimize callers that only care
about how much of the image is allocated (want_zero is false),
rather than full details about runs of zeroes and which offsets the
allocation actually maps to (want_zero is true). As part of this
effort, fix another part of the documentation: the claim in commit
4c41cb4 that BDRV_BLOCK_ALLOCATED is short for 'DATA || ZERO' is a
lie at the block layer (see commit e88ae2264), even though it is
how the bit is computed from the driver layer. After all, there
are intentionally cases where we return ZERO but not ALLOCATED at
the block layer, when we know that a read sees zero because the
backing file is too short. Note that the driver interface is thus
slightly different than the public interface with regards to which
bits will be set, and what guarantees are provided on input.
We also add an assertion that any driver using the new callback will
make progress (the only time pnum will be 0 is if the block layer
already handled an out-of-bounds request, or if there is an error);
the old driver interface did not provide this guarantee, which
could lead to some inf-loops in drastic corner-case failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP. Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional. Let's audit how they were set:
crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_
nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)
file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met
qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss
all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough
Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field. For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in bca80059e. For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-11-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
Allow block driver to map and unmap a buffer for later I/O, as a performance
hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180116060901.17413-5-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We need to remember how many of the drain sections in which a node is
were recursive (i.e. subtree drain rather than node drain), so that they
can be correctly applied when children are added or removed during the
drained section.
With this change, it is safe to modify the graph even inside a
bdrv_subtree_drained_begin/end() section.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_drained_begin() waits for the completion of requests in the whole
subtree, but it only actually keeps its immediate bs parameter quiesced
until bdrv_drained_end().
Add a version that keeps the whole subtree drained. As of this commit,
graph changes cannot be allowed during a subtree drained section, but
this will be fixed soon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is in preparation for subtree drains, i.e. drained sections that
affect not only a single node, but recursively all child nodes, too.
Calling the parent callbacks for drain is pointless when we just came
from that parent node recursively and leads to multiple increases of
bs->quiesce_counter in a single drain call. Don't do it.
In order for this to work correctly, the parent callback must be called
for every bdrv_drain_begin/end() call, not only for the outermost one:
If we have a node N with two parents A and B, recursive draining of A
should cause the quiesce_counter of B to increase because its child N is
drained independently of B. If now B is recursively drained, too, A must
increase its quiesce_counter because N is drained independently of A
only now, even if N is going from quiesce_counter 1 to 2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On one hand, it is a good idea for bdrv_next() to return a strong
reference because ideally nearly every pointer should be refcounted.
This fixes intermittent failure of iotest 194.
On the other, it is absolutely necessary for bdrv_next() itself to keep
a strong reference to both the BB (in its first phase) and the BDS (at
least in the second phase) because when called the next time, it will
dereference those objects to get a link to the next one. Therefore, it
needs these objects to stay around until then. Just storing the pointer
to the next in the iterator is not really viable because that pointer
might become invalid as well.
Both arguments taken together means we should probably just invoke
bdrv_ref() and blk_ref() in bdrv_next(). This means we have to assert
that bdrv_next() is always called from the main loop, but that was
probably necessary already before this patch and judging from the
callers, it also looks to actually be the case.
Keeping these strong references means however that callers need to give
them up if they decide to abort the iteration early. They can do so
through the new bdrv_next_cleanup() function.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110172545.32609-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated. Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter. For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface. But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors. Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring). Fix a neighboring assertion to
use is_power_of_2 while there.
For ease of review, bdrv_get_block_status() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status() to
bdrv_block_status() ensures that the compiler enforces that all
callers are updated. For now, the io.c layer still assert()s that
all callers are sector-aligned, but that can be relaxed when a later
patch implements byte-based block status in the drivers.
There was an inherent limitation in returning the offset via the
return value: we only have room for BDRV_BLOCK_OFFSET_MASK bits, which
means an offset can only be mapped for sector-aligned queries (or,
if we declare that non-aligned input is at the same relative position
modulo 512 of the answer), so the new interface also changes things to
return the offset via output through a parameter by reference rather
than mashed into the return value. We'll have some glue code that
munges between the two styles until we finish converting all uses.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), coupled
with the tweak in calling convention. But some code, particularly
bdrv_is_allocated(), gets a lot simpler because it no longer has to
mess with sectors.
For ease of review, bdrv_get_block_status_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the process of converting sector-based interfaces to bytes,
I'm finding it easier to represent a byte count as a 64-bit
integer at the block layer (even if we are internally capped
by SIZE_MAX or even INT_MAX for individual transactions, it's
still nicer to not have to worry about truncation/overflow
issues on as many variables). Update the signature of
bdrv_round_to_clusters() to uniformly use int64_t, matching
the signature already chosen for bdrv_is_allocated and the
fact that off_t is also a signed type, then adjust clients
according to the required fallout (even where the result could
now exceed 32 bits, no client is directly assigning the result
into a 32-bit value without breaking things into a loop first).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need to make any assumptions about the graph layout above the
top node of the commit operation any more. Remove the use of
bdrv_find_overlay() and related variables from the commit job code.
bdrv_drop_intermediate() doesn't use the 'active' parameter any more, so
we can just drop it.
The overlay node was previously added to the block job to get a
BLK_PERM_GRAPH_MOD. We really need to respect those permissions in
bdrv_drop_intermediate() now, but as long as we haven't figured out yet
how BLK_PERM_GRAPH_MOD is actually supposed to work, just leave a TODO
comment there.
With this change, it is now possible to perform another block job on an
overlay node without conflicts. qemu-iotests 030 is changed accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If we switch between read-only and read-write, the permissions that
image format drivers need on bs->file change, too. Make sure to update
the permissions during bdrv_reopen().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When new permissions are calculated during bdrv_reopen(), they need to
be based on the state of the graph as it will be after the reopen has
completed, not on the current state of the involved nodes.
This patch makes bdrv_is_writable() optionally accept a BlockReopenQueue
from which the new flags are taken. This is then used for determining
the new bs->file permissions of format drivers as soon as we add the
code to actually pass a non-NULL reopen queue to the .bdrv_child_perm
callbacks.
While moving bdrv_is_writable(), make it static. It isn't used outside
block.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BDRV_O_ALLOW_RDWR is a flag that tells whether qemu can internally
reopen a node read-write temporarily because the user requested
read-write for the top-level image, but qemu decided that read-only is
enough for this node (a backing file).
bdrv_reopen() is different, it is also used for cases where the user
changed their mind and wants to update the options. There is no reason
to forbid making a node read-write in that case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be needed to check some restrictions before making bitmap
persistent in qmp-block-dirty-bitmap-add (this functionality will be
added by future patch)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-22-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated(). But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.
For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
