The IO operations for the i6300esb watchdog timer are marked as
DEVICE_NATIVE_ENDIAN. This is not correct, and - as a PCI device - should
be DEVICE_LITTLE_ENDIAN.
This allows i6300esb to work on ppc targets (yes, using an Intel ICH
derived device on ppc is a bit odd, but the driver exists on the guest
and there's no more obviously suitable watchdog device).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1427075508-12099-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fw_cfg documentation says this of the revision key (0x0001, FW_CFG_ID):
> A 32-bit little-endian unsigned int, this item is used as an interface
> revision number, and is currently set to 1 by all QEMU architectures
> which expose a fw_cfg device.
arm/virt doesn't. It could be argued that that's an error in
"hw/arm/virt.c"; on the other hand, all of the other fw_cfg providing
boards set the interface version to 1 manually, despite the device
coming from the same, shared implementation. Therefore, instead of
adding
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
to arm/virt, consolidate all such existing calls in the fw_cfg
initialization code.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-Id: <1426789244-26318-1-git-send-email-somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not bother DMA, because DMA generally transfers
the entire SGList in one shot if it can.
PIO, on the other hand, tries to transfer just one sector
at a time, and will make multiple visits to the sglist
to fetch memory addresses.
Fix the memory address calculaton when we have an offset
by moving the offset addition OUTSIDE of the le64_to_cpu
calculation.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-4-git-send-email-jsnow@redhat.com
Similar to the cmd_write_pio fix, update the nsector count and
ide sector before we invoke ide_transfer_start.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-3-git-send-email-jsnow@redhat.com
We need to adjust the sector being written to
prior to calling ide_transfer_start, otherwise
we'll write to the same sector again.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-2-git-send-email-jsnow@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BNKx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue 2015-03-19
# gpg: Signature made Thu Mar 19 19:40:17 2015 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Haswell-noTSX and Broadwell-noTSX
Revert "target-i386: Disable HLE and RTM on Haswell & Broadwell"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gCrW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/work/numa-verify-cpus-pull-request' into staging
NUMA queue 2015-03-19
# gpg: Signature made Thu Mar 19 19:25:53 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found
* remotes/ehabkost/tags/work/numa-verify-cpus-pull-request:
numa: Print warning if no node is assigned to a CPU
pc: fix default VCPU to NUMA node mapping
numa: introduce machine callback for VCPU to node mapping
numa: Reject configuration if CPU appears on multiple nodes
numa: Reject CPU indexes > max_cpus
numa: Fix off-by-one error at MAX_CPUMASK_BITS check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Lidonglin <lidonglin@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Ohci does't support hotplugging/hotunplugging yet, but
existing resource cleanup leak logic likes ehci/uhci.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Lidonglin <lidonglin@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 13704e4c45.
With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.
So instead of making the CPU model results confusing by making it depend
on the machine-type, keep HLE and RTM on the existing Haswell and
Broadwell CPU models. The plan is to introduce "Haswell-noTSX" and
"Broadwell-noTSX" CPU models later, for people who have CPUs that don't
have TSX feature available.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit
dd0247e0 pc: acpi: mark all possible CPUs as enabled in SRAT
Linux kernel actually tries to use CPU to Node mapping from
QEMU provided SRAT table instead of discarding it, and that
in some cases breaks build_sched_domains() which expects
sane mapping where cores/threads belonging to the same socket
are on the same NUMA node.
With current default round-robin mapping of VCPUs to nodes
guest ends-up with cores/threads belonging to the same socket
being on different NUMA nodes.
For example with following CLI:
qemu-system-x86_64 -m 4G \
-cpu Opteron_G3,vendor=AuthenticAMD \
-smp 5,sockets=1,cores=4,threads=1,maxcpus=8 \
-numa node,nodeid=0 -numa node,nodeid=1
2.6.32 based kernels will hang on boot due to incorrectly built
sched_group-s list in update_sd_lb_stats()
Replacing default mapping with a manual, where VCPUs belonging to
the same socket are on the same NUMA node, fixes the issue for
guests which can't handle nonsense topology i.e. changing CLI to:
-numa node,nodeid=0,cpus=0-3 -numa node,nodeid=1,cpus=4-7
So instead of simply scattering VCPUs around nodes, provide
callback to map the same socket VCPUs to the same NUMA node,
which is what guests would expect from a sane hardware/BIOS.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Users of virtio-serial may want to know when a port becomes writable. A
port can stop accepting writes if the guest port is open but not being
read from. In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.
When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVCXAHAAoJECgfDbjSjVRp6zcH/A1NwWCefPfGj2wLc/GdhKJ4
NcxNYQwNh/C687BKV+iBFvUqh+G1lkuoz7OYX+EGvzadqeWmDX7uIhCm8z01aqb0
La/afm/JyB22Vz7Za1od+JUyjwSJoyBiD/1OI/lS6/6fPLtj1vwnyC4V6zmJgXDt
OvWKYk/xexMSnQH8Gutw74Kasdvh+ui1l2T1Ti5VlYY5Ea6a36dDxqKhdMOdMOpE
5zAQHNGYihtQhxjJPUdvoCR0zNknNGd62XpMBk7mEvB98yCZnLLZ/HnbeDjUV9gN
Lj8yG1nbsiGA2uu4XHD+PTHW3wN0K/DDM9XDDGOHuh7jsBB7XSrVBD/TnQuUmUg=
=sL0e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, virtio bugfixes for 2.3
Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 18 12:31:03 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pcie_aer: fix comment to match pcie spec
pci: fix several trivial typos in comment
aer: fix a wrong init PCI_ERR_COR_STATUS w1cmask type register
pcie_aer: fix typos in pcie_aer_inject_error comment
aer: fix wrong check on expose aer tlp prefix log
pcie: correct mistaken register bit for End-End TLP Prefix Blocking
virtio: Fix memory leaks reported by Coverity
virtio: validate the existence of handle_output before calling it
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.
Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The pc-dimm option presented on device list (by argument "-device \?")
is the unique option that don't have any information about it. This
patch adds a description for the pc-dimm device to help users to
identify it.
Signed-off-by: Paulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is a continuation of the work started in commit 565f65d27:
"error: Use error_report_err() where appropriate"
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Code comment says "table 6-2" but in fact it's is not a table, it is
"Figure 6-2" on page 479.
Cc: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Error Status Register, so this patch fix a wrong definition
for PCI_ERR_COR_STATUS register with w1cmask type.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refer to "PCI Express Base Spec3.0", this comments can't
fit the description in spec, so we should fix them.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
when specify TLP Prefix log as using pcie_aer_inject_error,
the TLP prefix log is always discarded. because the check
is incorrect, the End-End TLP Prefix Supported bit
(PCI_EXP_DEVCAP2_EETLPP) should be in Device Capabilities 2 Register.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
from pcie spec 7.8.17, the End-End TLP Prefix Blocking bit local
is 15(e.g. 0x8000) in device control 2 register.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
if k->set_host_notifier failed, VirtIOSCSIVring *r will leak
Signed-off-by: Bo Su <subo7@huawei.com>
Message-Id: <1426671732-80213-1-git-send-email-subo7@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hotplugging a scsi-disk may trigger the assertion in qemu_sgl_concat.
qemu-system-x86_64: qemu/hw/scsi/virtio-scsi.c:115: qemu_sgl_concat:
Assertion `skip == 0' failed.
This is introduced by commit 55783a55 (virtio-scsi: work around bug in
old BIOSes) which didn't check out_num when accessing out_sg[0].iov_len
(the same to in sg). For virtio_scsi_push_event, looking into out_sg
doesn't make sense because 0 req_size is intended.
Cc: qemu-stable@nongnu.org
[Cc'ing qemu-stable because 55783a55 did it too]
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1426233354-525-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Boards that do not include an USB controller should not provide
USB devices. However, when running "qemu-system-s390x -device help"
for example, there's still a usb-hub, usb-kbd, usb-mouse and
usb-tablet in the list of "supported" devices. Let's fix that
by compiling and linking the USB files only if it is really
necessary.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* QTest for PC X86CPU
* Confinement of ICC bridge X86CPU parenting to PC code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJVCEbzAAoJEPou0S0+fgE/0CQQAK7LPJgLXD7tvbD7nhX+E+Vl
8OeawRKag367b1yqHGgdAd4JxTSSFDzjqif67OYAG5xRuA53tZ6BdccWlnLUYYbW
+v2931HR+E4KztVHato7qdq0lVmbv9N9kg44KQPPuX8cNvJIliT/ap3SKc9btSp3
I10QtM41+KqzJYa6TBzkpij12AbzOD153STrdmiasIIQc4SMKuAZRA/A14fLazj9
iraIRLQQ1gvKPuL/4eCGN65sxXHq93ga0LeU2L2slPxm8jJ1BzgzFTDJtcXSG4Sj
CQCmDCAn8BFoom3HP5REg6u0p/d1+UbBCl9S/YjUiA5lDSrJh+8xSZ4zcwAGHcXQ
LzRKxZ18TJnpg4qcohikl43NkDmCKpqbj1T5QRrFlUp5pcia7tqlREwOTJTu8YpX
gMvdMrshJ0nM2BrdTXpkeQRP4hTKJ4pbaT15FIbxAFAqwihHW07pYU1mE0enmFb+
cA4yJTT4D4qwUFGm3OJEk/jsQmEpAoD7lz2MSjBVZiX1Crprs7ETGKalVDxDYBga
CaTxJp5nZhgwEbgmKx5/AxnohMVEs40+sXieNHkFhOZ8DOJ+/kAClBmqHakR8ENg
G6B1/gN3Gr5fSTEdppXAbvDe7g8qpC9gWkV7kwFie/MykrmDWDnivvVKxt9PlRgC
DUhHfcNCISWNvaBZWc31
=fe5i
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-peter' into staging
QOM CPUState and X86CPU
* QTest for PC X86CPU
* Confinement of ICC bridge X86CPU parenting to PC code
# gpg: Signature made Tue Mar 17 15:23:31 2015 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-cpu-for-peter:
target-i386: Remove icc_bridge parameter from cpu_x86_create()
tests: Add PC CPU test
pc: Suppress APIC ID compatibility warning for QTest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing icc_bridge from the PC initialization code to
cpu_x86_create(), make the PC initialization code attach the CPU to
icc_bridge.
The only difference here is that icc_bridge attachment will now be done
after x86_cpu_parse_featurestr() is called. But this shouldn't make any
difference, as property setters shouldn't depend on icc_bridge.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move non-qdev-gpio[*] from /machine into /machine/unattached.
For the PC this moves 25 nodes from the stable namespace into the unstable.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
usb_msd_password_cb() is only called from within an HMP command
handler. Replace by error_report_err().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the image is encrypted, QMP device_add creates the device, defers
actually attaching it to when the key becomes available, then returns
an error. This is wrong. device_add must either create the device
and succeed, or do nothing and fail.
The bug is in usb_msd_realize_storage(). It posts an error with
qerror_report_err(), and returns success. Device realization relies
on the return value, and completes. The QMP monitor, however, relies
on the posted error, and sends it in an error reply.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -usb -qmp stdio -drive if=none,id=foo,file=geheim.qcow2
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device_add", "arguments": { "driver": "usb-storage", "id": "bar", "drive": "foo" } }
{"error": {"class": "DeviceEncrypted", "desc": "'foo' (geheim.qcow2) is encrypted"}}
Even though we got an error back, the device got created just fine.
To demonstrate, let's unplug it again:
{"execute":"device_del","arguments": { "id": "bar" } }
{"timestamp": {"seconds": 1426003440, "microseconds": 237181}, "event": "DEVICE_DELETED", "data": {"path": "/machine/peripheral/bar/bar.0/legacy[0]"}}
{"timestamp": {"seconds": 1426003440, "microseconds": 238231}, "event": "DEVICE_DELETED", "data": {"device": "bar", "path": "/machine/peripheral/bar"}}
{"return": {}}
Fix by making usb_msd_realize_storage() fail properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
monitor_read_bdrv_key_start() does several things:
1. If no key is needed, call completion_cb() and succeed
2. If we're in QMP context, call qerror_report_err() and fail
3. Start reading the key in the monitor.
This is two things too many. Inline 1. and 2. into its callers
monitor_read_block_device_key() and usb_msd_realize_storage().
Since monitor_read_block_device_key() only ever runs in HMP context,
drop 2. there.
The next commit will clean up the result in usb_msd_realize_storage().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 457215ec "ohci: Use QOM realize for OHCI" converted only
"sysbus-ohci". Finish the job: convert "pci-ohci".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit broke the additional messages explaining the error
messages. Improve the error messages, so they don't need explaining
so much. Helps QMP users as well, unlike additional explanations.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This loses the messages explaining the error printed with
error_printf_unless_qmp(). The next commit will make up for the loss.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use DeviceClass::realize() and TypeInfo::instance_init() instead of
the deprecated SysBusDevice::init().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DZVy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150316' into staging
migration/next for 20150316
# gpg: Signature made Mon Mar 16 13:36:37 2015 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20150316:
pc: Disable vmdesc submission for old machines
migration: Allow to suppress vmdesc submission
migration: Read JSON VM description on incoming migration
rename save_block_hdr to save_page_header
save_block_hdr: we can recalculate the cont parameter here
save_xbzrle_page: change calling convention
ram_save_page: change calling covention
ram_find_and_save_block: change calling convention
ram: make all save_page functions take a uint64_t parameter
Add migrate_incoming
Add -incoming defer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All four leaks are similar, so fix them in one patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't validate the existence of handle_output which may let a buggy
guest to trigger a SIGSEV easily. E.g:
1) write 10 to queue_sel to a virtio net device with only 1 queue
2) setup an arbitrary pfn
3) then notify queue 10
Fixing this by validating the existence of handle_output before.
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
* fix handling of execute-never bits in page table walks
* tell kernel to initialize KVM GIC in realize function
* fix handling of STM (user) with r15 in register list
* ignore low bit of PC in M-profile exception return
* fix linux-user get/set_tls syscalls on CPUs with TZ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uK1h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150316' into staging
target-arm queue:
* fix handling of execute-never bits in page table walks
* tell kernel to initialize KVM GIC in realize function
* fix handling of STM (user) with r15 in register list
* ignore low bit of PC in M-profile exception return
* fix linux-user get/set_tls syscalls on CPUs with TZ
# gpg: Signature made Mon Mar 16 12:39:04 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150316:
linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUs
target-arm: Ignore low bit of PC in M-profile exception return
target-arm: Fix handling of STM (user) with r15 in register list
hw/intc/arm_gic: Initialize the vgic in the realize function
target-arm: get_phys_addr_lpae: more xn control
target-arm: fix get_phys_addr_v6/SCTLR_AFE access check
target-arm: convert check_ap to ap_to_rw_prot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
