Commit Graph

160 Commits

Author SHA1 Message Date
Eric Blake
5c86bdf120 block: Call attention to truncation of long NBD exports
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user.  Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).

Reported-by: Xueqiang Wei <xuwei@redhat.com>
Fixes: https://bugzilla.redhat.com/1843684
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
2020-06-10 12:58:59 -05:00
Vladimir Sementsov-Ogievskiy
714eb0dbc5 block/nbd-client: drop max_block restriction from discard
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_TRIM. So, drop the restriction.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200401150112.9557-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-04 15:16:46 -05:00
Vladimir Sementsov-Ogievskiy
6bf792b464 block/nbd-client: drop max_block restriction from block_status
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_BLOCK_STATUS. So, drop the
restriction.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200401150112.9557-2-vsementsov@virtuozzo.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-05-04 15:13:14 -05:00
Maxim Levitsky
5a5e7f8cd8 block: trickle down the fallback image creation function use to the block drivers
Instead of checking the .bdrv_co_create_opts to see if we need the
fallback, just implement the .bdrv_co_create_opts in the drivers that
need it.

This way we don't break various places that need to know if the
underlying protocol/format really supports image creation, and this way
we still allow some drivers to not support image creation.

Fixes: fd17146cd9
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1816007

Note that technically this driver reverts the image creation fallback
for the vxhs driver since I don't have a means to test it, and IMHO it
is better to leave it not supported as it was prior to generic image
creation patches.

Also drop iscsi_create_opts which was left accidentally.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-3-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
[mreitz: Fixed alignment, and moved bdrv_co_create_opts_simple() and
         bdrv_create_opts_simple from block.h into block_int.h]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-26 14:44:33 +01:00
Pan Nengyuan
8198cf5ef0 block/nbd: fix memory leak in nbd_open()
In currently implementation there will be a memory leak when
nbd_client_connect() returns error status. Here is an easy way to
reproduce:

1. run qemu-iotests as follow and check the result with asan:
    ./check -raw 143

Following is the asan output backtrack:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f629688a560 in calloc (/usr/lib64/libasan.so.3+0xc7560)
    #1 0x7f6295e7e015 in g_malloc0  (/usr/lib64/libglib-2.0.so.0+0x50015)
    #2 0x56281dab4642 in qobject_input_start_struct  /mnt/sdb/qemu-4.2.0-rc0/qapi/qobject-input-visitor.c:295
    #3 0x56281dab1a04 in visit_start_struct  /mnt/sdb/qemu-4.2.0-rc0/qapi/qapi-visit-core.c:49
    #4 0x56281dad1827 in visit_type_SocketAddress  qapi/qapi-visit-sockets.c:386
    #5 0x56281da8062f in nbd_config   /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1716
    #6 0x56281da8062f in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1829
    #7 0x56281da8062f in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873

Direct leak of 15 byte(s) in 1 object(s) allocated from:
    #0 0x7f629688a3a0 in malloc (/usr/lib64/libasan.so.3+0xc73a0)
    #1 0x7f6295e7dfbd in g_malloc (/usr/lib64/libglib-2.0.so.0+0x4ffbd)
    #2 0x7f6295e96ace in g_strdup (/usr/lib64/libglib-2.0.so.0+0x68ace)
    #3 0x56281da804ac in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1834
    #4 0x56281da804ac in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873

Indirect leak of 24 byte(s) in 1 object(s) allocated from:
    #0 0x7f629688a3a0 in malloc (/usr/lib64/libasan.so.3+0xc73a0)
    #1 0x7f6295e7dfbd in g_malloc (/usr/lib64/libglib-2.0.so.0+0x4ffbd)
    #2 0x7f6295e96ace in g_strdup (/usr/lib64/libglib-2.0.so.0+0x68ace)
    #3 0x56281dab41a3 in qobject_input_type_str_keyval /mnt/sdb/qemu-4.2.0-rc0/qapi/qobject-input-visitor.c:536
    #4 0x56281dab2ee9 in visit_type_str /mnt/sdb/qemu-4.2.0-rc0/qapi/qapi-visit-core.c:297
    #5 0x56281dad0fa1 in visit_type_UnixSocketAddress_members qapi/qapi-visit-sockets.c:141
    #6 0x56281dad17b6 in visit_type_SocketAddress_members qapi/qapi-visit-sockets.c:366
    #7 0x56281dad186a in visit_type_SocketAddress qapi/qapi-visit-sockets.c:393
    #8 0x56281da8062f in nbd_config /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1716
    #9 0x56281da8062f in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1829
    #10 0x56281da8062f in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873

Fixes: 8f071c9db5
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1575517528-44312-3-git-send-email-pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-02-26 17:29:00 -06:00
Pan Nengyuan
7f493662be block/nbd: extract the common cleanup code
The BDRVNBDState cleanup code is common in two places, add
nbd_clear_bdrvstate() function to do these cleanups.

Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1575517528-44312-2-git-send-email-pannengyuan@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix compilation error and commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-02-26 17:28:08 -06:00
Eric Blake
2485f22fe9 nbd-client: Support leading / in NBD URI
The NBD URI specification [1] states that only one leading slash at
the beginning of the URI path component is stripped, not all such
slashes.  This becomes important to a patch I just proposed to nbdkit
[2], which would allow the exportname to select a file embedded within
an ext2 image: ext2fs demands an absolute pathname beginning with '/',
and because qemu was inadvertantly stripping it, my nbdkit patch had
to work around the behavior.

[1] https://github.com/NetworkBlockDevice/nbd/blob/master/doc/uri.md
[2] https://www.redhat.com/archives/libguestfs/2020-February/msg00109.html

Note that the qemu bug only affects handling of URIs such as
nbd://host:port//abs/path (where '/abs/path' should be the export
name); it is still possible to use --image-opts and pass the desired
export name with a leading slash directly through JSON even without
this patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200212023101.1162686-1-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-26 14:45:02 -06:00
Max Reitz
78c81a3f10 block/nbd: Fix hang in .bdrv_close()
When nbd_close() is called from a coroutine, the connection_co never
gets to run, and thus nbd_teardown_connection() hangs.

This is because aio_co_enter() only puts the connection_co into the main
coroutine's wake-up queue, so this main coroutine needs to yield and
wait for connection_co to terminate.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
Vladimir Sementsov-Ogievskiy
d936613547 nbd: assert that Error** is not NULL in nbd_iter_channel_error
All callers of nbd_iter_channel_error() pass the address of a
local_err variable, and only call this function if an error has
already occurred, using this function to propagate that error.
This is already implied by its name (local_err instead of the classic
errp), but it is worth additionally stressing this by adding an
assertion to make it part of the function contract.

The local_err parameter is not here to return information about
nbd_iter_channel_error failure. Instead it's assumed to be filled when
passed to the function. This is already stressed by its name
(local_err, instead of classic errp). Stress it additionally by
assertion.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-22-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18 08:43:19 +01:00
Eric Blake
93676c88d7 nbd: Don't send oversize strings
Qemu as server currently won't accept export names larger than 256
bytes, nor create dirty bitmap names longer than 1023 bytes, so most
uses of qemu as client or server have no reason to get anywhere near
the NBD spec maximum of a 4k limit per string.

However, we weren't actually enforcing things, ignoring when the
remote side violates the protocol on input, and also having several
code paths where we send oversize strings on output (for example,
qemu-nbd --description could easily send more than 4k).  Tighten
things up as follows:

client:
- Perform bounds check on export name and dirty bitmap request prior
  to handing it to server
- Validate that copied server replies are not too long (ignoring
  NBD_INFO_* replies that are not copied is not too bad)
server:
- Perform bounds check on export name and description prior to
  advertising it to client
- Reject client name or metadata query that is too long
- Adjust things to allow full 4k name limit rather than previous
  256 byte limit

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-4-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-11-18 16:01:34 -06:00
Vladimir Sementsov-Ogievskiy
f7651539d8 block/nbd: nbd reconnect
Implement reconnect. To achieve this:

1. add new modes:
   connecting-wait: means, that reconnecting is in progress, and there
     were small number of reconnect attempts, so all requests are
     waiting for the connection.
   connecting-nowait: reconnecting is in progress, there were a lot of
     attempts of reconnect, all requests will return errors.

   two old modes are used too:
   connected: normal state
   quit: exiting after fatal error or on close

Possible transitions are:

   * -> quit
   connecting-* -> connected
   connecting-wait -> connecting-nowait (transition is done after
                      reconnect-delay seconds in connecting-wait mode)
   connected -> connecting-wait

2. Implement reconnect in connection_co. So, in connecting-* mode,
    connection_co, tries to reconnect unlimited times.

3. Retry nbd queries on channel error, if we are in connecting-wait
    state.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191009084158.15614-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-10-22 09:22:07 -05:00
Maxim Levitsky
e99754b42e nbd: add empty .bdrv_reopen_prepare
Fixes commit job / qemu-img commit, when
commiting qcow2 file which is based on nbd export.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1718727
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190930213820.29777-2-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Eric Blake
f061656cc3 nbd: Implement client use of NBD FAST_ZERO
The client side is fairly straightforward: if the server advertised
fast zero support, then we can map that to BDRV_REQ_NO_FALLBACK
support.  A server that advertises FAST_ZERO but not WRITE_ZEROES
is technically broken, but we can ignore that situation as it does
not change our behavior.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190823143726.27062-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-09-05 16:03:26 -05:00
Eric Blake
df18c04edf nbd: Use g_autofree in a few places
Thanks to our recent move to use glib's g_autofree, I can join the
bandwagon.  Getting rid of gotos is fun ;)

There are probably more places where we could register cleanup
functions and get rid of more gotos; this patch just focuses on the
labels that existed merely to call g_free.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190824172813.29720-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-09-05 15:52:45 -05:00
Peter Maydell
c6a2225a5a nbd patches for 2019-08-15
- Addition of InetSocketAddress keep-alive
 - Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
 - Initial refactoring in preparation of NBD reconnect
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJdVaRZAAoJEKeha0olJ0NqrGoIAJSvVLMDeWZIkHr3CQ5AbMHy
 6IHUntBwv4PEHw0FyyDU7lLgEWubTwe/7RfvyJ69kQYSJLjvHa3KEic0aa7SOETK
 hGUlSoIFHEugi+XDcYyy9EG+ItUR7jnunkwomxvFRm4XzjEHFO9ck8fOS+uq/23e
 LGDHwdoZI6vawUPftbBuRAlB3egCEcBtTWXYMk8lm3MXHOHL7O18DRkfWvwcHfl6
 mNIKgTVMtl1gYoJznCUmC5VLHL4jQy+kSNXnyHBQOEEvTcORu0EztJS81H+BODni
 sxa9seem7JL9NLUTmkJsbGfSM6RKdfypX34oik9yakqUnXRrlxkxI+IX26XfdQ4=
 =2MAO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging

nbd patches for 2019-08-15

- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect

# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2019-08-15:
  block/nbd: refactor nbd connection parameters
  block/nbd: add cmdline and qapi parameter reconnect-delay
  block/nbd: move from quit to state
  block/nbd: use non-blocking io channel for nbd negotiation
  block/nbd: split connection_co start out of nbd_client_connect
  nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
  block/stream: use BDRV_REQ_PREFETCH
  block: implement BDRV_REQ_PREFETCH
  qapi: Add InetSocketAddress member keep-alive

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 15:53:37 +01:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Vladimir Sementsov-Ogievskiy
8f071c9db5 block/nbd: refactor nbd connection parameters
We'll need some connection parameters to be available all the time to
implement nbd reconnect. So, let's refactor them: define additional
parameters in BDRVNBDState, drop them from function parameters, drop
nbd_client_init and separate options parsing instead from nbd_open.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190618114328.55249-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Drop useless 'if' before object_unref]
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-08-15 13:22:14 -05:00
Vladimir Sementsov-Ogievskiy
b172ae2e0e block/nbd: add cmdline and qapi parameter reconnect-delay
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2]
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-08-15 13:22:14 -05:00
Vladimir Sementsov-Ogievskiy
a34b1e5e06 block/nbd: move from quit to state
To implement reconnect we need several states for the client:
CONNECTED, QUIT and two different CONNECTING states. CONNECTING states
will be added in the following patches. This patch implements CONNECTED
and QUIT.

QUIT means, that we should close the connection and fail all current
and further requests (like old quit = true).

CONNECTED means that connection is ok, we can send requests (like old
quit = false).

For receiving loop we use a comparison of the current state with QUIT,
because reconnect will be in the same loop, so it should be looping
until the end.

Opposite, for requests we use a comparison of the current state with
CONNECTED, as we don't want to send requests in future CONNECTING
states.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-08-15 13:22:14 -05:00
Vladimir Sementsov-Ogievskiy
a8e2bb6a76 block/nbd: use non-blocking io channel for nbd negotiation
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-08-15 13:22:14 -05:00
Vladimir Sementsov-Ogievskiy
962b7b3d4c block/nbd: split connection_co start out of nbd_client_connect
nbd_client_connect is going to be used from connection_co, so, let's
refactor nbd_client_connect in advance, leaving io channel
configuration all in nbd_client_connect.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-08-15 13:22:13 -05:00
Eric Blake
5cf42b1c1f nbd: Initialize reply on failure
We've had two separate reports of different callers running into use
of uninitialized data if s->quit is set (one detected by gcc -O3,
another by valgrind), due to checking 'nbd_reply_is_simple(reply) ||
s->quit' in the wrong order. Rather than chasing down which callers
need to pre-initialize reply, and whether there are any other
uninitialized uses, it's easier to guarantee that reply will always be
set by nbd_co_receive_one_chunk() even on failure.

The uninitialized use happens to be harmless (the only time the
variable is uninitialized is if s->quit is set, so the conditional
results in the same action regardless of what was read from reply),
and was introduced in commit 65e01d47.

In fixing the problem, it can also be seen that all (one) callers pass
in a non-NULL reply, so there is a dead conditional to also be cleaned
up.

Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190719172001.19770-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-19 13:19:18 -05:00
Vladimir Sementsov-Ogievskiy
611ae1d716 block/nbd: merge NBDClientSession struct back to BDRVNBDState
No reason to keep it separate, it differs from others block driver
behavior and therefore confuses. Instead of generic
  'state = (State*)bs->opaque' we have to use special helper.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-06-13 10:00:42 -05:00
Vladimir Sementsov-Ogievskiy
86f8cdf3db block/nbd: merge nbd-client.* to nbd.c
No reason for keeping driver handlers realization separate from driver
structure. We can get rid of extra header file.

While being here, fix comments style, restore forgotten comments for
NBD_FOREACH_REPLY_CHUNK and nbd_reply_chunk_iter_receive, remove extra
includes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-06-13 09:55:09 -05:00
Eric Blake
7da537f70d nbd/client: Lower min_block for block-status, unaligned size
We have a latent bug in our NBD client code, tickled by the brand new
nbdkit 1.11.10 block status support:

$ nbdkit --filter=log --filter=truncate -U - \
           data data="1" size=511 truncate=64K logfile=/dev/stdout \
           --run 'qemu-img convert $nbd /var/tmp/out'
...
qemu-img: block/io.c:2122: bdrv_co_block_status: Assertion `*pnum && QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset' failed.

The culprit? Our implementation of .bdrv_co_block_status can return
unaligned block status for any server that operates with a lower
actual alignment than what we tell the block layer in
request_alignment, in violation of the block layer's constraints. To
date, we've been unable to trip the bug, because qemu as NBD server
always advertises block sizing (at which point it is a server bug if
the server sends unaligned status - although qemu 3.1 is such a server
and I've sent separate patches for 4.0 both to get the server to obey
the spec, and to let the client to tolerate server oddities at EOF).

But nbdkit does not (yet) advertise block sizing, and therefore is not
in violation of the spec for returning block status at whatever
boundaries it wants, and those unaligned results can occur anywhere
rather than just at EOF. While we are still wise to avoid sending
sub-sector read/write requests to a server of unknown origin, we MUST
consider that a server telling us block status without an advertised
block size is correct.  So, we either have to munge unaligned answers
from the server into aligned ones that we hand back to the block
layer, or we have to tell the block layer about a smaller alignment.

Similarly, if the server advertises an image size that is not
sector-aligned, we might as well assume that the server intends to let
us access those tail bytes, and therefore supports a minimum block
size of 1, regardless of whether the server supports block status
(although we still need more patches to fix the problem that with an
unaligned image, we can send read or block status requests that exceed
EOF to the server). Again, qemu as server cannot trip this problem
(because it rounds images to sector alignment), but nbdkit advertised
unaligned size even before it gained block status support.

Solve both alignment problems at once by using better heuristics on
what alignment to report to the block layer when the server did not
give us something to work with. Note that very few NBD servers
implement block status (to date, only qemu and nbdkit are known to do
so); and as the NBD spec mentioned block sizing constraints prior to
documenting block status, it can be assumed that any future
implementations of block status are aware that they must advertise
block size if they want a minimum size other than 1.

We've had a long history of struggles with picking the right alignment
to use in the block layer, as evidenced by the commit message of
fd8d372d (v2.12) that introduced the current choice of forced 512-byte
alignment.

There is no iotest coverage for this fix, because qemu can't provoke
it, and I didn't want to make test 241 dependent on nbdkit.

Fixes: fd8d372d
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
2019-03-30 20:52:19 -05:00
Max Reitz
998b3a1e5a block: Purify .bdrv_refresh_filename()
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.

This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.

Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.

Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.

This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz
2654267cc1 block: Add strong_runtime_opts to BlockDriver
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.

Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz
8a6239c071 block/nbd: Make bdrv_dirname() return NULL
The generic bdrv_dirname() implementation would be able to generate some
form of directory name for many NBD nodes, but it would be always wrong.
Therefore, we have to explicitly make it an error (until NBD has some
form of specification for export paths, if it ever will).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190201192935.18394-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:26 +01:00
Vladimir Sementsov-Ogievskiy
d42f78e940 block/nbd: move connection code from block/nbd to block/nbd-client
Keep all connection code in one file, to be able to implement reconnect
in further patches.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190201130138.94525-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: format tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-04 15:11:27 -06:00
Markus Armbruster
ba891d68b4 qstring: Move qstring_from_substr()'s @end one to the right
qstring_from_substr() takes the index of the substring's first and
last character.  qstring_from_substr(s, 0, SIZE_MAX) denotes an empty
substring.  Awkward.

Shift the end index one to the right.  This simplifies both
qstring_from_substr() and its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180727062204.10401-3-armbru@redhat.com>
2018-07-28 09:09:58 +02:00
Eric Blake
216ee3657e nbd/client: Add x-dirty-bitmap to query bitmap from server
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context.  Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are).  Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.

A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix.  Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.

The next patch adds an iotest to exercise this new code.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
2018-07-02 15:27:38 -05:00
Markus Armbruster
af91062ee1 block: Factor out qobject_input_visitor_new_flat_confused()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Markus Armbruster
374c52467a block: Fix -drive for certain non-string scalars
The previous commit fixed -blockdev breakage due to misuse of the
qobject input visitor's keyval flavor in bdrv_file_open().  The commit
message explain why using the plain flavor would be just as wrong; it
would break -drive.  Turns out we break it in three places:
nbd_open(), sd_open() and ssh_file_open().  They are even marked
FIXME.  Example breakage:

    $ qemu-system-x86 -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off
    qemu-system-x86: -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off: Invalid parameter type for 'numeric', expected: boolean

Fix it the same way: replace qdict_crumple() by
qdict_crumple_for_keyval_qiv(), and switch from plain to the keyval
flavor.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Max Reitz
609f45ea95 block: Add block-specific QDict header
There are numerous QDict functions that have been introduced for and are
used only by the block layer.  Move their declarations into an own
header file to reflect that.

While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them.  Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Michael S. Tsirkin
0d8c41dae5 block: use local path for local headers
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-31 04:16:06 +03:00
Marc-André Lureau
cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Vladimir Sementsov-Ogievskiy
78a33ab587 nbd: BLOCK_STATUS for standard get_block_status function: client part
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, fix min_block check and 32-bit cap, use -1
instead of errno on failure in nbd_negotiate_simple_meta_context,
ensure that block status makes progress on success]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-13 15:43:48 -05:00
Markus Armbruster
9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Eric Blake
fd8d372dd3 nbd: Honor server's advertised minimum block size
Commit 79ba8c98 (v2.7) changed the setting of request_alignment
to occur only during bdrv_refresh_limits(), rather than at at
bdrv_open() time; but at the time, NBD was unaffected, because
it still used sector-based callbacks, so the block layer
defaulted NBD to use 512 request_alignment.

Later, commit 70c4fb26 (also v2.7) changed NBD to use byte-based
callbacks, without setting request_alignment.  This resulted in
NBD using request_alignment of 1, which works great when the
server supports it (as is the case for qemu-nbd), but falls apart
miserably if the server requires alignment (but only if qemu
actually sends a sub-sector request; qemu-io can do it, but
most qemu operations still perform on sectors or larger).

Even later, the NBD protocol was updated to document that clients
should learn the server's minimum alignment during NBD_OPT_GO;
and recommended that clients should assume a minimum size of 512
unless the server understands NBD_OPT_GO and replied with a smaller
size.  Commit 081dd1fe (v2.10) attempted to do that, by assigning
request_alignment to whatever was learned from the server; but
it has two flaws: the assignment is done during bdrv_open() so
it gets unconditionally wiped out back to 1 during any later
bdrv_refresh_limits(); and the code is not using a default of 512
when the server did not report a minimum size.

Fix these issues by moving the assignment to request_alignment
to the right function, and by using a sane default when the
server does not advertise a minimum size.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180215032905.27146-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
2018-03-01 14:02:32 -06:00
Eric Blake
e24d813b29 block: Simplify bdrv_can_write_zeroes_with_unmap()
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP.  Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional.  Let's audit how they were set:

crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_

nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)

file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met

qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss

all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough

Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field.  For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in bca80059e.  For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-02-09 12:32:44 -06:00
Markus Armbruster
922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster
bbcad965bf Drop superfluous includes of qapi/qmp/qjson.h
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Edgar Kaziakhmedov
9776f0db6a nbd: implement bdrv_get_info callback
Since mirror job supports efficient zero out target mechanism (see
in mirror_dirty_init()), implement bdrv_get_info to make it work
over NBD. Such improvement will allow using the largest chunk possible
and will decrease the number of NBD_CMD_WRITE_ZEROES requests on the wire.

Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Message-Id: <20180118115158.17219-1-edgar.kaziakhmedov@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26 09:58:46 -06:00
Murilo Opsfelder Araujo
c4365735a7 block/nbd: fix segmentation fault when .desc is not null-terminated
The find_desc_by_name() from util/qemu-option.c relies on the .name not being
NULL to call strcmp(). This check becomes unsafe when the list is not
NULL-terminated, which is the case of nbd_runtime_opts in block/nbd.c, and can
result in segmentation fault when strcmp() tries to access an invalid memory:

    #0 0x00007fff8c75f7d4 in __strcmp_power9 () from /lib64/libc.so.6
    #1 0x00000000102d3ec8 in find_desc_by_name (desc=0x1036d6f0, name=0x28e46670 "server.path") at util/qemu-option.c:166
    #2 0x00000000102d93e0 in qemu_opts_absorb_qdict (opts=0x28e47a80, qdict=0x28e469a0, errp=0x7fffec247c98) at util/qemu-option.c:1026
    #3 0x000000001012a2e4 in nbd_open (bs=0x28e42290, options=0x28e469a0, flags=24578, errp=0x7fffec247d80) at block/nbd.c:406
    #4 0x00000000100144e8 in bdrv_open_driver (bs=0x28e42290, drv=0x1036e070 <bdrv_nbd_unix>, node_name=0x0, options=0x28e469a0, open_flags=24578, errp=0x7fffec247f50) at block.c:1135
    #5 0x0000000010015b04 in bdrv_open_common (bs=0x28e42290, file=0x0, options=0x28e469a0, errp=0x7fffec247f50) at block.c:1395

>From gdb, the desc[i].name was not NULL and resulted in strcmp() accessing an
invalid memory:

    >>> p desc[5]
    $8 = {
      name = 0x1037f098 "R27A",
      type = 1561964883,
      help = 0xc0bbb23e <error: Cannot access memory at address 0xc0bbb23e>,
      def_value_str = 0x2 <error: Cannot access memory at address 0x2>
    }
    >>> p desc[6]
    $9 = {
      name = 0x103dac78 <__gcov0.do_qemu_init_bdrv_nbd_init> "\001",
      type = 272101528,
      help = 0x29ec0b754403e31f <error: Cannot access memory at address 0x29ec0b754403e31f>,
      def_value_str = 0x81f343b9 <error: Cannot access memory at address 0x81f343b9>
    }

This patch fixes the segmentation fault in strcmp() by adding a NULL element at
the end of nbd_runtime_opts.desc list, which is the common practice to most of
other structs like runtime_opts in block/null.c. Thus, the desc[i].name != NULL
check becomes safe because it will not evaluate to true when .desc list reached
its end.

Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1727259
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.vnet.ibm.com>
Message-Id: <20180105133241.14141-2-muriloo@linux.vnet.ibm.com>
CC: qemu-stable@nongnu.org
Fixes: 7ccc44fd7d
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-08 09:12:23 -06:00
Eric Blake
081dd1fe36 nbd: Implement NBD_INFO_BLOCK_SIZE on client
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.

When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.

When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:42 +02:00
Eric Blake
004a89fce9 nbd: Create struct for tracking export info
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size.  It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:41 +02:00
Max Reitz
f69165a8fe block: Do not strcmp() with NULL uri->scheme
uri_parse(...)->scheme may be NULL. In fact, probably every field may be
NULL, and the callers do test this for all of the other fields but not
for scheme (except for block/gluster.c; block/vxhs.c does not access
that field at all).

We can easily fix this by using g_strcmp0() instead of strcmp().

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613205726.13544-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26 14:54:46 +02:00
Marc-André Lureau
01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Markus Armbruster
bd269ebc82 sockets: Limit SocketAddressLegacy to external interfaces
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C.  SocketAddress is the
equivalent flat union.  Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.

See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09 09:14:40 +02:00
Markus Armbruster
62cf396b5d sockets: Rename SocketAddressFlat to SocketAddress
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
2017-05-09 09:14:40 +02:00