Now that we can boot from multiple boot devices, we have to make sure
to reinitialize static variables like rx_last_idx to avoid that they
contain garbage data during the second boot attempt (which can lead to
crashes when the code tries to access the wrong ring data).
Message-ID: <20241111131120.317796-1-thuth@redhat.com>
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit bb185de423 ("s390x: Add individual loadparm assignment to
CCW device") allowed boot devices to be assigned a loadparm value independent
of the machine value, however, when no boot devices are defined, the machine
loadparm becomes ignored. Therefore, let's check the machine loadparm
prior to probing the devices.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241114161952.3508554-1-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clear information about cdrom type so that current IPL device isn't tainted
by stale data from previous devices.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241108194136.2833932-1-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is SeaBIOS for the hppa architecture v17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
Signed-off-by: Helge Deller <deller@gmx.de>
This update includes the full boot order support feature from Jared Rossi
and the TEXTREL fix from Jens Remus.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some packaging tools want to override `LDFLAGS` when building QEMU, this will
result in a build error as most likely no `-nostdlib` flag is passed. Introduce
`EXTRA_LDFLAGS` so that the packager can override `LDFLAGS` without breaking the
build.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-4-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Drop the hunk to netbook.mak which is not necessary anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 7cd50cbe4c ("pc-bios/s390-ccw: Don't use __bss_start with the
"larl" instruction") introduced the address constant bss_start_literal
for __bss_start in the .text section, which introduced a relocation in
code (i.e. TEXTREL). The dedicated constant is required, as __bss_start
may not necessarily be aligned on a 2-byte boundary (see subject commit
for details).
Move the constant to the .data section to get rid of the relocation in
the .text section. Add the linker option -z text to prevent TEXTRELs to
get introduced in the future.
Note that the R_390_RELATIVE relocations are taken care of by function
glue() in include/hw/elf_ops.h.inc introduced by commit 5dce07e1cb
("elf-loader: Provide the possibility to relocate s390 ELF files").
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-3-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The assembler directive .align [1] has architecture-dependent behavior,
which may be ambiguous for the reader. Some architectures perform the
alignment in bytes, others in power of two. s390 does in bytes.
Use the directive .balign [2] instead, to clarify that the alignment
request is in bytes. No functional change.
[1] https://sourceware.org/binutils/docs/as/Align.html
[2] https://sourceware.org/binutils/docs/as/Balign.html
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow attempts to boot from multiple IPL devices. If the first device fails to
IPL, select the pre-built IPLB for the next device in the boot order and attempt
to IPL from it. Continue this process until IPL is successful or there are no
devices left to try.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-18-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL functions such that a return code is propagated
back to the main IPL calling function (rather than terminating immediately),
which facilitates possible error recovery in the future.
A select few panics remain, which indicate fatal non-devices errors that must
result in termination.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-13-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from Netboot specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-12-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from DASD IPL specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-11-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from virtio-scsi IPL specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-10-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from ECKD block device IPL specific functions so that
error recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-9-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL ISO El Torito specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-8-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the netboot code has been merged into the main s390-ccw.img,
it also does not make sense to keep the build rules in a separate
file. Thus let's merge netboot.mak into the main Makefile.
Message-Id: <20240621082422.136217-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We originally built a separate binary for the netboot code since it
was considered as experimental and we could not be sure that the
necessary SLOF module had been checked out. Time passed, the code
proved its usefulness, and the build system nowadays makes sure that
the SLOF module is checked out if you have a s390x compiler available
for building the s390-ccw bios. So there is no real compelling reason
anymore to keep the netboot code in a separate binary. Linking the
code together with the main s390-ccw.img will make future enhancements
much easier, like supporting more than one boot device.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-4-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are already using the libc from SLOF for the s390-netboot.img, and
this libc implementation is way more complete and accurate than the
simple implementation that we currently use for the s390-ccw.img binary.
Since we are now always assuming that the SLOF submodule is available
when building the s390-ccw bios (see commit bf6903f694), we can drop
the simple implementation and use the SLOF libc for the s390-ccw.img
binary, too.
Additionally replace sclp_print calls with puts/printf now that it is
available.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-3-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update list of images supported in unpack_edk2_blobs to enable RISC-V
ACPI table testing.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-13-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -Wl,-pie and -nostdlib flags are added to LDFLAGS twice. Merge
the two lines to get rid of the duplicates.
Message-ID: <20240621082422.136217-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the missing 64-bit hppa firmware blob so that it gets installed.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf939 ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update edk2 to the latest release tagged end of last week.
Cc stable this time because we should move away from the
git snapshot update done in January.
-----BEGIN PGP SIGNATURE-----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=4SrN
-----END PGP SIGNATURE-----
Merge tag 'edk2-stable202402-20240226-pull-request' of https://gitlab.com/kraxel/qemu into staging
firmware: update to edk2-stable202402
Update edk2 to the latest release tagged end of last week.
Cc stable this time because we should move away from the
git snapshot update done in January.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmXctQ0ACgkQTLbY7tPo
# cTjOkA/+OIMaKRl+ZQAQQYlfLoJK/XK51QHyZugzehWs1o5LBHh4aWrtcxTLhPQb
# Zvofzm59XNb5drBuZIZbdso6hFt7jZbzw7VsIJW/CFlqIJTGDffdmmJzPoGVoHlj
# SX9aVFlLT2Gu5qlRG5yaZKQF3gnJDKmOSfM8DJxu9yvxcY+Y812k1LV1M0zoedBR
# gx2283UISUQcT/3iazCWRpJVxV60i7iN4BsHUUgiJNOUIlMoNeFPZxL2OZl4m72+
# bA0EklTgMcCesctsDQvF+Ql30mY/KTtK7CtEhVvB13n87sDj73YuQng9lsL4x2oY
# NiokFlTKbvoDek4hjuyfHuf8MwwFPUHMHTFa5A61Er4UaiejgNE1I6rnyoIDAKz/
# bcZm3jYlu4La32mVsXyVxW+5812cR0PE6hZqBPvyMl2VtXhWTXLMjseTM8TzHo5a
# u/CYvKF7gDppoaPsy/sASC4Q4ko49U83BYC/ftJQHBmkIslI1jeP9wfqXOQk40Cn
# H/GyfTQZvam9Al6nxh++cU3cUoux3YQpNW5RE5Au4qizH/kyO8vFHPs4e4jbaOlc
# pI5g2bQESMM14tR5xEN5EKuxs0+GOlnzziCsWaVjBCU7s6YsFHclLSK/0zf2RUas
# uNiI6jjsgojUfpm896Xp6zaXUDWiQ6oyMdFBa72S8XJmzOufPV0=
# =4SrN
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Feb 2024 15:58:05 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'edk2-stable202402-20240226-pull-request' of https://gitlab.com/kraxel/qemu:
update edk2 binaries to edk2-stable202402
update edk2 submodule to edk2-stable202402
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes a number of improvements and fixes. Importantly there
is a change for QEMU platforms to permit the ChipTOD to be initialised
if it is present in the device tree. This will facilitate ChipTOD
enablement in pnv.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SeaBIOS-hppa version 16 news & enhancements:
- Initial 64-bit firmware release
- Added fault handler to catch and report firmware bugs
- Use Qemu's builtin_console_out() via diag 0x101
- parisc-qemu-install Makefile target to install firmware in qemu
- Added -fw_cfg opt/OS64,string=3 option
Fixes:
- Avoid crash when booting without SCSI controller
- Avoid possible crashes while detecting LASI LAN & graphics
- Don't check layers in PDC_MEM_MAP_HPA, fixes NetBSD
- Ensure cache definition does not trigger endless loops
- Mark B160L as 32-bit machine in inventory
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
=FAMY
-----END PGP SIGNATURE-----
Merge tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa qemu v8.2 regression fixes
There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:
- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure
This patch series fixes those known regressions and additionally:
- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)
This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.
Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
if default devices should be created
- Added Tested-by and Reviewed-by tags
Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 15
target/hppa: Fix IOR and ISR on error in probe
target/hppa: Fix IOR and ISR on unaligned access trap
target/hppa: Export function hppa_set_ior_and_isr()
target/hppa: Avoid accessing %gr0 when raising exception
hw/hppa: Move software power button address back into PDC
target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
hw/hppa/machine: Disable default devices with --nodefaults option
hw/hppa/machine: Allow up to 3840 MB total memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
-----BEGIN PGP SIGNATURE-----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=bcZj
-----END PGP SIGNATURE-----
Merge tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu into staging
edk2: update to git snapshot (maybe for-8.2)
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo
# cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO
# NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA
# Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6
# o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp
# /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k
# BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4
# UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ
# gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l
# YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct
# ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp
# MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU=
# =bcZj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
tests/acpi: update expected data files
edk2: update binaries to git snapshot
edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
edk2: update to git snapshot
tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's been a while. This fixes compile warning, typos and
a bug with virtio-serial being used after it was shutdown
at "quiesce".
The full changelog is here:
Alexey Kardashevskiy (2):
Remove ?PICK
version: update to 20230918
Jordan Niethe (1):
virtio-serial: Do not close stdout on quiesce
Kautuk Consul (1):
virtio-serial: Make read and write methods report failure
Thomas Huth (10):
lib/libnet/ipv6: Silence compiler warning from Clang
Fix typos in the board-qemu folder
Fix typos in the lib/libnet folder
Fix typos in the remaining lib folders
Fix typos in the slof folder
Fix typos in the board-js2x folder
Fix typos in the llfw folder
Fix typos in the board-js2x folder
Fix typos in the clients folder
Fix remaining typos in various folders
Compiled with gcc-12.1.0-nolibc
Tested with (sorry, no KVM):
/home/aik/b/q-slof/qemu-system-ppc64 \
-nodefaults \
-chardev stdio,id=STDIO0,signal=off,mux=on \
-device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \
-mon id=MON0,chardev=STDIO0,mode=readline \
-nographic \
-vga none \
-m 2G \
-kernel /home/aik/t/vml4150le \
-initrd /home/aik/t/le.cpio \
-machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \
-bios pc-bios/slof.bin \
-trace events=/home/aik/qemu_trace_events \
-d guest_errors \
-chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \
-mon chardev=SOCKET0,mode=control \
-name 604650,debug-threads=on
[ npiggin: Also tested with KVM, including with virtio-console. ]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SEABIOS_HPPA_VERSION 12 contains those fixes and enhancements:
- Reduce debug level
- Update README file for PA-RISC
- Fix debug name of CPU_HPA_xx if xx >= 10
- Disable device indexing
SEABIOS_HPPA_VERSION 11 contains those fixes and enhancements
(mostly to enable support for 64-bit Linux kernel):
- Fixed 64-bit CPU detection via "mfctl,w" instruction
- Implement PDC_PSW for 64-bit CPUs
- Added PAT PDC functions:
- PDC_PAT_CELL
- PDC_PAT_CHASSIS_LOG
- PDC_PAT_PD_GET_ADDR_MAP
- PDC_PAT_CPU
- Fix return value of PDC_CACHE_RET_SPID space-id bits
- Introduce new default software IDs for the machines
- Fix CPU and FPU model numbers
- Fix 64-bit SMP rendezvous
- Fix Linux 64-bit kernel crash in STI due to usage of unsigned
32-bit "next_font" pointer in sti header files
- Fix graphics output to LASI artist card on PA2.0 machines
- More USB OHCI endianess fixes
- Fixes which make ODE run on B160L
- Fixes which make ODE detect Astro Runway port and CPUs
- Implement "firmware unlocking" via PDC_MODEL/PDC_MODEL_CAPABILITIES call
- Add subfunction 2 for PDC_MODEL_VERSIONS
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
