mirror of
https://github.com/qemu/qemu.git
synced 2024-12-04 01:03:38 +08:00
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and pci_map_irq_fn to a PCI bus. This coupling gets in the way when the pci_map_irq_fn is board-specific while the pci_set_irq_fn is device- specific. For example, both of QEMU's PIIX south bridge models have different pci_map_irq_fn implementations which are board-specific rather than device-specific. These implementations should therefore reside in board code. The pci_set_irq_fn's, however, should stay in the device models because they access memory internal to the model. Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the assignments to be decoupled, resolving the problem described above. Note also how pci_vpb_realize() which gets touched in this commit assigns different pci_map_irq_fn's depending on the board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-5-shentey@gmail.com> [PMD: Factor out in vfu_object_set_bus_irq()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This commit is contained in:
parent
1bdad09bf3
commit
f021f4e9d2
@ -268,8 +268,8 @@ static void pc_q35_init(MachineState *machine)
|
||||
for (i = 0; i < GSI_NUM_PINS; i++) {
|
||||
qdev_connect_gpio_out_named(lpc_dev, ICH9_GPIO_GSI, i, x86ms->gsi[i]);
|
||||
}
|
||||
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc_map_irq, ich9_lpc,
|
||||
ICH9_LPC_NB_PIRQS);
|
||||
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc, ICH9_LPC_NB_PIRQS);
|
||||
pci_bus_map_irqs(host_bus, ich9_lpc_map_irq);
|
||||
pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
|
||||
isa_bus = ich9_lpc->isa_bus;
|
||||
|
||||
|
@ -384,8 +384,8 @@ static void piix3_realize(PCIDevice *dev, Error **errp)
|
||||
return;
|
||||
}
|
||||
|
||||
pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
|
||||
piix3, PIIX_NUM_PIRQS);
|
||||
pci_bus_irqs(pci_bus, piix3_set_irq, piix3, PIIX_NUM_PIRQS);
|
||||
pci_bus_map_irqs(pci_bus, pci_slot_get_pirq);
|
||||
pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
|
||||
}
|
||||
|
||||
@ -420,8 +420,8 @@ static void piix3_xen_realize(PCIDevice *dev, Error **errp)
|
||||
* connected to the IOAPIC directly.
|
||||
* These additional routes can be discovered through ACPI.
|
||||
*/
|
||||
pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
|
||||
piix3, XEN_PIIX_NUM_PIRQS);
|
||||
pci_bus_irqs(pci_bus, xen_piix3_set_irq, piix3, XEN_PIIX_NUM_PIRQS);
|
||||
pci_bus_map_irqs(pci_bus, xen_pci_slot_get_pirq);
|
||||
}
|
||||
|
||||
static void piix3_xen_class_init(ObjectClass *klass, void *data)
|
||||
|
@ -271,7 +271,8 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
|
||||
}
|
||||
qdev_connect_gpio_out(DEVICE(&s->pm), 0, s->isa[9]);
|
||||
|
||||
pci_bus_irqs(pci_bus, piix4_set_irq, pci_slot_get_pirq, s, PIIX_NUM_PIRQS);
|
||||
pci_bus_irqs(pci_bus, piix4_set_irq, s, PIIX_NUM_PIRQS);
|
||||
pci_bus_map_irqs(pci_bus, pci_slot_get_pirq);
|
||||
}
|
||||
|
||||
static void piix4_init(Object *obj)
|
||||
|
@ -258,7 +258,8 @@ static void raven_pcihost_realizefn(DeviceState *d, Error **errp)
|
||||
|
||||
qdev_init_gpio_in(d, raven_change_gpio, 1);
|
||||
|
||||
pci_bus_irqs(&s->pci_bus, raven_set_irq, raven_map_irq, s, PCI_NUM_PINS);
|
||||
pci_bus_irqs(&s->pci_bus, raven_set_irq, s, PCI_NUM_PINS);
|
||||
pci_bus_map_irqs(&s->pci_bus, raven_map_irq);
|
||||
|
||||
memory_region_init_io(&h->conf_mem, OBJECT(h), &pci_host_conf_le_ops, s,
|
||||
"pci-conf-idx", 4);
|
||||
|
@ -422,7 +422,8 @@ static void pci_vpb_realize(DeviceState *dev, Error **errp)
|
||||
mapfn = pci_vpb_map_irq;
|
||||
}
|
||||
|
||||
pci_bus_irqs(&s->pci_bus, pci_vpb_set_irq, mapfn, s->irq, 4);
|
||||
pci_bus_irqs(&s->pci_bus, pci_vpb_set_irq, s->irq, 4);
|
||||
pci_bus_map_irqs(&s->pci_bus, mapfn);
|
||||
|
||||
/* Our memory regions are:
|
||||
* 0 : our control registers
|
||||
|
12
hw/pci/pci.c
12
hw/pci/pci.c
@ -280,6 +280,7 @@ static void pci_change_irq_level(PCIDevice *pci_dev, int irq_num, int change)
|
||||
PCIBus *bus;
|
||||
for (;;) {
|
||||
bus = pci_get_bus(pci_dev);
|
||||
assert(bus->map_irq);
|
||||
irq_num = bus->map_irq(pci_dev, irq_num);
|
||||
if (bus->set_irq)
|
||||
break;
|
||||
@ -518,16 +519,20 @@ void pci_root_bus_cleanup(PCIBus *bus)
|
||||
qbus_unrealize(BUS(bus));
|
||||
}
|
||||
|
||||
void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
|
||||
void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq,
|
||||
void *irq_opaque, int nirq)
|
||||
{
|
||||
bus->set_irq = set_irq;
|
||||
bus->map_irq = map_irq;
|
||||
bus->irq_opaque = irq_opaque;
|
||||
bus->nirq = nirq;
|
||||
bus->irq_count = g_malloc0(nirq * sizeof(bus->irq_count[0]));
|
||||
}
|
||||
|
||||
void pci_bus_map_irqs(PCIBus *bus, pci_map_irq_fn map_irq)
|
||||
{
|
||||
bus->map_irq = map_irq;
|
||||
}
|
||||
|
||||
void pci_bus_irqs_cleanup(PCIBus *bus)
|
||||
{
|
||||
bus->set_irq = NULL;
|
||||
@ -549,7 +554,8 @@ PCIBus *pci_register_root_bus(DeviceState *parent, const char *name,
|
||||
|
||||
bus = pci_root_bus_new(parent, name, address_space_mem,
|
||||
address_space_io, devfn_min, typename);
|
||||
pci_bus_irqs(bus, set_irq, map_irq, irq_opaque, nirq);
|
||||
pci_bus_irqs(bus, set_irq, irq_opaque, nirq);
|
||||
pci_bus_map_irqs(bus, map_irq);
|
||||
return bus;
|
||||
}
|
||||
|
||||
|
@ -63,8 +63,9 @@ static void remote_machine_init(MachineState *machine)
|
||||
} else {
|
||||
remote_iohub_init(&s->iohub);
|
||||
|
||||
pci_bus_irqs(pci_host->bus, remote_iohub_set_irq, remote_iohub_map_irq,
|
||||
pci_bus_irqs(pci_host->bus, remote_iohub_set_irq,
|
||||
&s->iohub, REMOTE_IOHUB_NB_PIRQS);
|
||||
pci_bus_map_irqs(pci_host->bus, remote_iohub_map_irq);
|
||||
}
|
||||
|
||||
qbus_set_hotplug_handler(BUS(pci_host->bus), OBJECT(s));
|
||||
|
@ -665,8 +665,8 @@ void vfu_object_set_bus_irq(PCIBus *pci_bus)
|
||||
int bus_num = pci_bus_num(pci_bus);
|
||||
int max_bdf = PCI_BUILD_BDF(bus_num, PCI_DEVFN_MAX - 1);
|
||||
|
||||
pci_bus_irqs(pci_bus, vfu_object_set_irq, vfu_object_map_irq, pci_bus,
|
||||
max_bdf);
|
||||
pci_bus_irqs(pci_bus, vfu_object_set_irq, pci_bus, max_bdf);
|
||||
pci_bus_map_irqs(pci_bus, vfu_object_map_irq);
|
||||
}
|
||||
|
||||
static int vfu_object_device_reset(vfu_ctx_t *vfu_ctx, vfu_reset_type_t type)
|
||||
|
@ -282,8 +282,9 @@ PCIBus *pci_root_bus_new(DeviceState *parent, const char *name,
|
||||
MemoryRegion *address_space_io,
|
||||
uint8_t devfn_min, const char *typename);
|
||||
void pci_root_bus_cleanup(PCIBus *bus);
|
||||
void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
|
||||
void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq,
|
||||
void *irq_opaque, int nirq);
|
||||
void pci_bus_map_irqs(PCIBus *bus, pci_map_irq_fn map_irq);
|
||||
void pci_bus_irqs_cleanup(PCIBus *bus);
|
||||
int pci_bus_get_irq_level(PCIBus *bus, int irq_num);
|
||||
/* 0 <= pin <= 3 0 = INTA, 1 = INTB, 2 = INTC, 3 = INTD */
|
||||
|
Loading…
Reference in New Issue
Block a user