mirrors/qemu
0
0
Fork 0
mirror of https://github.com/qemu/qemu.git synced 2024-11-30 15:23:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

aspeed/intc: Add AST2700 support

Browse Source 
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Block diagram of GICINT132:

            GICINT132
  ETH1    +-----------+
+-------->+0         3|
  ETH2    |          4|
+-------->+1         5|
  ETH3    |          6|
+-------->+2        19|                          INTC                          GIC
  UART0   |         20|            +--------------------------+
+-------->+7        21|            |                          |            +--------------+
  UART1   |         22|            |orgate0 +----> output_pin0+----------->+GIC128        |
+-------->+8        23|            |                          |            |              |
  UART2   |         24|            |orgate1 +----> output_pin1+----------->+GIC129        |
+-------->+9        25|            |                          |            |              |
  UART3   |         26|            |orgate2 +----> output_pin2+----------->+GIC130        |
+--------->10       27|            |                          |            |              |
  UART5   |         28|            |orgate3 +----> output_pin3+----------->+GIC131        |
+-------->+11       29|            |                          |            |              |
  UART6   |           +----------->+orgate4 +----> output_pin4+----------->+GIC132        |
+-------->+12       30|            |                          |            |              |
  UART7   |         31|            |orgate5 +----> output_pin5+----------->+GIC133        |
+-------->+13         |            |                          |            |              |
  UART8   |  OR[0:31] |            |orgate6 +----> output_pin6+----------->+GIC134        |
---------->14         |            |                          |            |              |
  UART9   |           |            |orgate7 +----> output_pin7+----------->+GIC135        |
--------->+15         |            |                          |            |              |
  UART10  |           |            |orgate8 +----> output_pin8+----------->+GIC136        |
--------->+16         |            |                          |            +--------------+
  UART11  |           |            +--------------------------+
+-------->+17         |
  UART12  |           |
+--------->18         |
          |           |
          |           |
          |           |
          +-----------+

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
This commit is contained in:
Jamin Lin 2024-06-04 13:44:33 +08:00 committed by Cédric Le Goater
parent e7c8106d48
commit d831c5fd86
4 changed files with 419 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

361
hw/intc/aspeed_intc.c Normal file
View File

@ -0,0 +1,361 @@
/*
* ASPEED INTC Controller
*
* Copyright (C) 2024 ASPEED Technology Inc.
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include "qemu/osdep.h"
#include "hw/intc/aspeed_intc.h"
#include "hw/irq.h"
#include "qemu/log.h"
#include "trace.h"
#include "hw/registerfields.h"
#include "qapi/error.h"
/* INTC Registers */
REG32(GICINT128_EN, 0x1000)
REG32(GICINT128_STATUS, 0x1004)
REG32(GICINT129_EN, 0x1100)
REG32(GICINT129_STATUS, 0x1104)
REG32(GICINT130_EN, 0x1200)
REG32(GICINT130_STATUS, 0x1204)
REG32(GICINT131_EN, 0x1300)
REG32(GICINT131_STATUS, 0x1304)
REG32(GICINT132_EN, 0x1400)
REG32(GICINT132_STATUS, 0x1404)
REG32(GICINT133_EN, 0x1500)
REG32(GICINT133_STATUS, 0x1504)
REG32(GICINT134_EN, 0x1600)
REG32(GICINT134_STATUS, 0x1604)
REG32(GICINT135_EN, 0x1700)
REG32(GICINT135_STATUS, 0x1704)
REG32(GICINT136_EN, 0x1800)
REG32(GICINT136_STATUS, 0x1804)
#define GICINT_STATUS_BASE R_GICINT128_STATUS
static void aspeed_intc_update(AspeedINTCState *s, int irq, int level)
{
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
if (irq >= aic->num_ints) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
__func__, irq);
return;
}
trace_aspeed_intc_update_irq(irq, level);
qemu_set_irq(s->output_pins[irq], level);
}
/*
* The address of GICINT128 to GICINT136 are from 0x1000 to 0x1804.
* Utilize "address & 0x0f00" to get the irq and irq output pin index
* The value of irq should be 0 to num_ints.
* The irq 0 indicates GICINT128, irq 1 indicates GICINT129 and so on.
*/
static void aspeed_intc_set_irq(void *opaque, int irq, int level)
{
AspeedINTCState *s = (AspeedINTCState *)opaque;
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
uint32_t status_addr = GICINT_STATUS_BASE + ((0x100 * irq) >> 2);
uint32_t select = 0;
uint32_t enable;
int i;
if (irq >= aic->num_ints) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
__func__, irq);
return;
}
trace_aspeed_intc_set_irq(irq, level);
enable = s->enable[irq];
if (!level) {
return;
}
for (i = 0; i < aic->num_lines; i++) {
if (s->orgates[irq].levels[i]) {
if (enable & BIT(i)) {
select |= BIT(i);
}
}
}
if (!select) {
return;
}
trace_aspeed_intc_select(select);
if (s->mask[irq] || s->regs[status_addr]) {
/*
* a. mask is not 0 means in ISR mode
* sources interrupt routine are executing.
* b. status register value is not 0 means previous
* source interrupt does not be executed, yet.
*
* save source interrupt to pending variable.
*/
s->pending[irq] |= select;
trace_aspeed_intc_pending_irq(irq, s->pending[irq]);
} else {
/*
* notify firmware which source interrupt are coming
* by setting status register
*/
s->regs[status_addr] = select;
trace_aspeed_intc_trigger_irq(irq, s->regs[status_addr]);
aspeed_intc_update(s, irq, 1);
}
}
static uint64_t aspeed_intc_read(void *opaque, hwaddr offset, unsigned int size)
{
AspeedINTCState *s = ASPEED_INTC(opaque);
uint32_t addr = offset >> 2;
uint32_t value = 0;
if (addr >= ASPEED_INTC_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
return 0;
}
value = s->regs[addr];
trace_aspeed_intc_read(offset, size, value);
return value;
}
static void aspeed_intc_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size)
{
AspeedINTCState *s = ASPEED_INTC(opaque);
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
uint32_t addr = offset >> 2;
uint32_t old_enable;
uint32_t change;
uint32_t irq;
if (addr >= ASPEED_INTC_NR_REGS) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
return;
}
trace_aspeed_intc_write(offset, size, data);
switch (addr) {
case R_GICINT128_EN:
case R_GICINT129_EN:
case R_GICINT130_EN:
case R_GICINT131_EN:
case R_GICINT132_EN:
case R_GICINT133_EN:
case R_GICINT134_EN:
case R_GICINT135_EN:
case R_GICINT136_EN:
irq = (offset & 0x0f00) >> 8;
if (irq >= aic->num_ints) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
__func__, irq);
return;
}
/*
* These registers are used for enable sources interrupt and
* mask and unmask source interrupt while executing source ISR.
*/
/* disable all source interrupt */
if (!data && !s->enable[irq]) {
s->regs[addr] = data;
return;
}
old_enable = s->enable[irq];
s->enable[irq] |= data;
/* enable new source interrupt */
if (old_enable != s->enable[irq]) {
trace_aspeed_intc_enable(s->enable[irq]);
s->regs[addr] = data;
return;
}
/* mask and unmask source interrupt */
change = s->regs[addr] ^ data;
if (change & data) {
s->mask[irq] &= ~change;
trace_aspeed_intc_unmask(change, s->mask[irq]);
} else {
s->mask[irq] |= change;
trace_aspeed_intc_mask(change, s->mask[irq]);
}
s->regs[addr] = data;
break;
case R_GICINT128_STATUS:
case R_GICINT129_STATUS:
case R_GICINT130_STATUS:
case R_GICINT131_STATUS:
case R_GICINT132_STATUS:
case R_GICINT133_STATUS:
case R_GICINT134_STATUS:
case R_GICINT135_STATUS:
case R_GICINT136_STATUS:
irq = (offset & 0x0f00) >> 8;
if (irq >= aic->num_ints) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
__func__, irq);
return;
}
/* clear status */
s->regs[addr] &= ~data;
/*
* These status registers are used for notify sources ISR are executed.
* If one source ISR is executed, it will clear one bit.
* If it clear all bits, it means to initialize this register status
* rather than sources ISR are executed.
*/
if (data == 0xffffffff) {
return;
}
/* All source ISR execution are done */
if (!s->regs[addr]) {
trace_aspeed_intc_all_isr_done(irq);
if (s->pending[irq]) {
/*
* handle pending source interrupt
* notify firmware which source interrupt are pending
* by setting status register
*/
s->regs[addr] = s->pending[irq];
s->pending[irq] = 0;
trace_aspeed_intc_trigger_irq(irq, s->regs[addr]);
aspeed_intc_update(s, irq, 1);
} else {
/* clear irq */
trace_aspeed_intc_clear_irq(irq, 0);
aspeed_intc_update(s, irq, 0);
}
}
break;
default:
s->regs[addr] = data;
break;
}
return;
}
static const MemoryRegionOps aspeed_intc_ops = {
.read = aspeed_intc_read,
.write = aspeed_intc_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
}
};
static void aspeed_intc_instance_init(Object *obj)
{
AspeedINTCState *s = ASPEED_INTC(obj);
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
int i;
assert(aic->num_ints <= ASPEED_INTC_NR_INTS);
for (i = 0; i < aic->num_ints; i++) {
object_initialize_child(obj, "intc-orgates[*]", &s->orgates[i],
TYPE_OR_IRQ);
object_property_set_int(OBJECT(&s->orgates[i]), "num-lines",
aic->num_lines, &error_abort);
}
}
static void aspeed_intc_reset(DeviceState *dev)
{
AspeedINTCState *s = ASPEED_INTC(dev);
memset(s->regs, 0, sizeof(s->regs));
memset(s->enable, 0, sizeof(s->enable));
memset(s->mask, 0, sizeof(s->mask));
memset(s->pending, 0, sizeof(s->pending));
}
static void aspeed_intc_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedINTCState *s = ASPEED_INTC(dev);
AspeedINTCClass *aic = ASPEED_INTC_GET_CLASS(s);
int i;
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_intc_ops, s,
TYPE_ASPEED_INTC ".regs", ASPEED_INTC_NR_REGS << 2);
sysbus_init_mmio(sbd, &s->iomem);
qdev_init_gpio_in(dev, aspeed_intc_set_irq, aic->num_ints);
for (i = 0; i < aic->num_ints; i++) {
if (!qdev_realize(DEVICE(&s->orgates[i]), NULL, errp)) {
return;
}
sysbus_init_irq(sbd, &s->output_pins[i]);
}
}
static void aspeed_intc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "ASPEED INTC Controller";
dc->realize = aspeed_intc_realize;
dc->reset = aspeed_intc_reset;
dc->vmsd = NULL;
}
static const TypeInfo aspeed_intc_info = {
.name = TYPE_ASPEED_INTC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_init = aspeed_intc_instance_init,
.instance_size = sizeof(AspeedINTCState),
.class_init = aspeed_intc_class_init,
.class_size = sizeof(AspeedINTCClass),
.abstract = true,
};
static void aspeed_2700_intc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedINTCClass *aic = ASPEED_INTC_CLASS(klass);
dc->desc = "ASPEED 2700 INTC Controller";
aic->num_lines = 32;
aic->num_ints = 9;
}
static const TypeInfo aspeed_2700_intc_info = {
.name = TYPE_ASPEED_2700_INTC,
.parent = TYPE_ASPEED_INTC,
.class_init = aspeed_2700_intc_class_init,
};
static void aspeed_intc_register_types(void)
{
type_register_static(&aspeed_intc_info);
type_register_static(&aspeed_2700_intc_info);
}
type_init(aspeed_intc_register_types);

1
hw/intc/meson.build
View File

@ -14,6 +14,7 @@ system_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files(
))
system_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c'))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c'))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_intc.c'))
system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c'))
system_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c'))

13
hw/intc/trace-events
View File

@ -79,6 +79,19 @@ aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
# aspeed_intc.c
aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
aspeed_intc_clear_irq(int irq, int level) "Clear IRQ %d: %d"
aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
aspeed_intc_pending_irq(int irq, uint32_t value) "Pending IRQ: %d: 0x%x"
aspeed_intc_trigger_irq(int irq, uint32_t value) "Trigger IRQ: %d: 0x%x"
aspeed_intc_all_isr_done(int irq) "All source ISR execution are done: %d"
aspeed_intc_enable(uint32_t value) "Enable: 0x%x"
aspeed_intc_select(uint32_t value) "Select: 0x%x"
aspeed_intc_mask(uint32_t change, uint32_t value) "Mask: 0x%x: 0x%x"
aspeed_intc_unmask(uint32_t change, uint32_t value) "UnMask: 0x%x: 0x%x"
# arm_gic.c
gic_enable_irq(int irq) "irq %d enabled"

44
include/hw/intc/aspeed_intc.h Normal file
View File

@ -0,0 +1,44 @@
/*
* ASPEED INTC Controller
*
* Copyright (C) 2024 ASPEED Technology Inc.
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#ifndef ASPEED_INTC_H
#define ASPEED_INTC_H
#include "hw/sysbus.h"
#include "qom/object.h"
#include "hw/or-irq.h"
#define TYPE_ASPEED_INTC "aspeed.intc"
#define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
#define ASPEED_INTC_NR_REGS (0x2000 >> 2)
#define ASPEED_INTC_NR_INTS 9
struct AspeedINTCState {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
MemoryRegion iomem;
uint32_t regs[ASPEED_INTC_NR_REGS];
OrIRQState orgates[ASPEED_INTC_NR_INTS];
qemu_irq output_pins[ASPEED_INTC_NR_INTS];
uint32_t enable[ASPEED_INTC_NR_INTS];
uint32_t mask[ASPEED_INTC_NR_INTS];
uint32_t pending[ASPEED_INTC_NR_INTS];
};
struct AspeedINTCClass {
SysBusDeviceClass parent_class;
uint32_t num_lines;
uint32_t num_ints;
};
#endif /* ASPEED_INTC_H */