qemu/block/iscsi.c

1716 lines
50 KiB
C
Raw Normal View History

iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
/*
* QEMU Block driver for iSCSI images
*
* Copyright (c) 2010-2011 Ronnie Sahlberg <ronniesahlberg@gmail.com>
* Copyright (c) 2012-2014 Peter Lieven <pl@kamp.de>
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "config-host.h"
#include <poll.h>
#include <math.h>
#include <arpa/inet.h>
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
#include "qemu-common.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qemu/bitops.h"
#include "qemu/bitmap.h"
#include "block/block_int.h"
#include "block/scsi.h"
#include "qemu/iov.h"
#include "sysemu/sysemu.h"
#include "qmp-commands.h"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
#include <iscsi/iscsi.h>
#include <iscsi/scsi-lowlevel.h>
#ifdef __linux__
#include <scsi/sg.h>
#include <block/scsi.h>
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
typedef struct IscsiLun {
struct iscsi_context *iscsi;
AioContext *aio_context;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
int lun;
enum scsi_inquiry_peripheral_device_type type;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
int block_size;
uint64_t num_blocks;
int events;
QEMUTimer *nop_timer;
uint8_t lbpme;
uint8_t lbprz;
uint8_t has_write_same;
struct scsi_inquiry_logical_block_provisioning lbp;
struct scsi_inquiry_block_limits bl;
unsigned char *zeroblock;
unsigned long *allocationmap;
int cluster_sectors;
bool use_16_for_rw;
bool write_protected;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
} IscsiLun;
typedef struct IscsiTask {
int status;
int complete;
int retries;
int do_retry;
struct scsi_task *task;
Coroutine *co;
QEMUBH *bh;
IscsiLun *iscsilun;
QEMUTimer retry_timer;
} IscsiTask;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
typedef struct IscsiAIOCB {
BlockAIOCB common;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
QEMUIOVector *qiov;
QEMUBH *bh;
IscsiLun *iscsilun;
struct scsi_task *task;
uint8_t *buf;
int status;
int64_t sector_num;
int nb_sectors;
#ifdef __linux__
sg_io_hdr_t *ioh;
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
} IscsiAIOCB;
#define NOP_INTERVAL 5000
#define MAX_NOP_FAILURES 3
#define ISCSI_CMD_RETRIES ARRAY_SIZE(iscsi_retry_times)
static const unsigned iscsi_retry_times[] = {8, 32, 128, 512, 2048};
/* this threshold is a trade-off knob to choose between
* the potential additional overhead of an extra GET_LBA_STATUS request
* vs. unnecessarily reading a lot of zero sectors over the wire.
* If a read request is greater or equal than ISCSI_CHECKALLOC_THRES
* sectors we check the allocation status of the area covered by the
* request first if the allocationmap indicates that the area might be
* unallocated. */
#define ISCSI_CHECKALLOC_THRES 64
static void
iscsi_bh_cb(void *p)
{
IscsiAIOCB *acb = p;
qemu_bh_delete(acb->bh);
g_free(acb->buf);
acb->buf = NULL;
acb->common.cb(acb->common.opaque, acb->status);
if (acb->task != NULL) {
scsi_free_scsi_task(acb->task);
acb->task = NULL;
}
qemu_aio_unref(acb);
}
static void
iscsi_schedule_bh(IscsiAIOCB *acb)
{
if (acb->bh) {
return;
}
acb->bh = aio_bh_new(acb->iscsilun->aio_context, iscsi_bh_cb, acb);
qemu_bh_schedule(acb->bh);
}
static void iscsi_co_generic_bh_cb(void *opaque)
{
struct IscsiTask *iTask = opaque;
iTask->complete = 1;
qemu_bh_delete(iTask->bh);
qemu_coroutine_enter(iTask->co, NULL);
}
static void iscsi_retry_timer_expired(void *opaque)
{
struct IscsiTask *iTask = opaque;
iTask->complete = 1;
if (iTask->co) {
qemu_coroutine_enter(iTask->co, NULL);
}
}
static inline unsigned exp_random(double mean)
{
return -mean * log((double)rand() / RAND_MAX);
}
static void
iscsi_co_generic_cb(struct iscsi_context *iscsi, int status,
void *command_data, void *opaque)
{
struct IscsiTask *iTask = opaque;
struct scsi_task *task = command_data;
iTask->status = status;
iTask->do_retry = 0;
iTask->task = task;
if (status != SCSI_STATUS_GOOD) {
if (iTask->retries++ < ISCSI_CMD_RETRIES) {
if (status == SCSI_STATUS_CHECK_CONDITION
&& task->sense.key == SCSI_SENSE_UNIT_ATTENTION) {
error_report("iSCSI CheckCondition: %s",
iscsi_get_error(iscsi));
iTask->do_retry = 1;
goto out;
}
if (status == SCSI_STATUS_BUSY) {
unsigned retry_time =
exp_random(iscsi_retry_times[iTask->retries - 1]);
error_report("iSCSI Busy (retry #%u in %u ms): %s",
iTask->retries, retry_time,
iscsi_get_error(iscsi));
aio_timer_init(iTask->iscsilun->aio_context,
&iTask->retry_timer, QEMU_CLOCK_REALTIME,
SCALE_MS, iscsi_retry_timer_expired, iTask);
timer_mod(&iTask->retry_timer,
qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + retry_time);
iTask->do_retry = 1;
return;
}
}
error_report("iSCSI Failure: %s", iscsi_get_error(iscsi));
}
out:
if (iTask->co) {
iTask->bh = aio_bh_new(iTask->iscsilun->aio_context,
iscsi_co_generic_bh_cb, iTask);
qemu_bh_schedule(iTask->bh);
} else {
iTask->complete = 1;
}
}
static void iscsi_co_init_iscsitask(IscsiLun *iscsilun, struct IscsiTask *iTask)
{
*iTask = (struct IscsiTask) {
.co = qemu_coroutine_self(),
.iscsilun = iscsilun,
};
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
static void
iscsi_abort_task_cb(struct iscsi_context *iscsi, int status, void *command_data,
void *private_data)
{
IscsiAIOCB *acb = private_data;
acb->status = -ECANCELED;
iscsi_schedule_bh(acb);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
static void
iscsi_aio_cancel(BlockAIOCB *blockacb)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
{
IscsiAIOCB *acb = (IscsiAIOCB *)blockacb;
IscsiLun *iscsilun = acb->iscsilun;
if (acb->status != -EINPROGRESS) {
return;
}
/* send a task mgmt call to the target to cancel the task on the target */
iscsi_task_mgmt_abort_task_async(iscsilun->iscsi, acb->task,
iscsi_abort_task_cb, acb);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
static const AIOCBInfo iscsi_aiocb_info = {
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
.aiocb_size = sizeof(IscsiAIOCB),
.cancel_async = iscsi_aio_cancel,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
};
static void iscsi_process_read(void *arg);
static void iscsi_process_write(void *arg);
static void
iscsi_set_events(IscsiLun *iscsilun)
{
struct iscsi_context *iscsi = iscsilun->iscsi;
int ev;
/* We always register a read handler. */
ev = POLLIN;
ev |= iscsi_which_events(iscsi);
if (ev != iscsilun->events) {
aio_set_fd_handler(iscsilun->aio_context,
iscsi_get_fd(iscsi),
iscsi_process_read,
(ev & POLLOUT) ? iscsi_process_write : NULL,
iscsilun);
}
iscsilun->events = ev;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
static void
iscsi_process_read(void *arg)
{
IscsiLun *iscsilun = arg;
struct iscsi_context *iscsi = iscsilun->iscsi;
iscsi_service(iscsi, POLLIN);
iscsi_set_events(iscsilun);
}
static void
iscsi_process_write(void *arg)
{
IscsiLun *iscsilun = arg;
struct iscsi_context *iscsi = iscsilun->iscsi;
iscsi_service(iscsi, POLLOUT);
iscsi_set_events(iscsilun);
}
static int64_t sector_lun2qemu(int64_t sector, IscsiLun *iscsilun)
{
return sector * iscsilun->block_size / BDRV_SECTOR_SIZE;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
static int64_t sector_qemu2lun(int64_t sector, IscsiLun *iscsilun)
{
return sector * BDRV_SECTOR_SIZE / iscsilun->block_size;
}
static bool is_request_lun_aligned(int64_t sector_num, int nb_sectors,
IscsiLun *iscsilun)
{
if ((sector_num * BDRV_SECTOR_SIZE) % iscsilun->block_size ||
(nb_sectors * BDRV_SECTOR_SIZE) % iscsilun->block_size) {
error_report("iSCSI misaligned request: "
"iscsilun->block_size %u, sector_num %" PRIi64
", nb_sectors %d",
iscsilun->block_size, sector_num, nb_sectors);
return 0;
}
return 1;
}
static unsigned long *iscsi_allocationmap_init(IscsiLun *iscsilun)
{
return bitmap_try_new(DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks,
iscsilun),
iscsilun->cluster_sectors));
}
static void iscsi_allocationmap_set(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors)
{
if (iscsilun->allocationmap == NULL) {
return;
}
bitmap_set(iscsilun->allocationmap,
sector_num / iscsilun->cluster_sectors,
DIV_ROUND_UP(nb_sectors, iscsilun->cluster_sectors));
}
static void iscsi_allocationmap_clear(IscsiLun *iscsilun, int64_t sector_num,
int nb_sectors)
{
int64_t cluster_num, nb_clusters;
if (iscsilun->allocationmap == NULL) {
return;
}
cluster_num = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
nb_clusters = (sector_num + nb_sectors) / iscsilun->cluster_sectors
- cluster_num;
if (nb_clusters > 0) {
bitmap_clear(iscsilun->allocationmap, cluster_num, nb_clusters);
}
}
static int coroutine_fn iscsi_co_writev(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
QEMUIOVector *iov)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t num_sectors;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (bs->bl.max_transfer_length && nb_sectors > bs->bl.max_transfer_length) {
error_report("iSCSI Error: Write of %d sectors exceeds max_xfer_len "
"of %d sectors", nb_sectors, bs->bl.max_transfer_length);
return -EINVAL;
}
lba = sector_qemu2lun(sector_num, iscsilun);
num_sectors = sector_qemu2lun(nb_sectors, iscsilun);
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsilun->use_16_for_rw) {
iTask.task = iscsi_write16_task(iscsilun->iscsi, iscsilun->lun, lba,
NULL, num_sectors * iscsilun->block_size,
iscsilun->block_size, 0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
} else {
iTask.task = iscsi_write10_task(iscsilun->iscsi, iscsilun->lun, lba,
NULL, num_sectors * iscsilun->block_size,
iscsilun->block_size, 0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
}
if (iTask.task == NULL) {
return -ENOMEM;
}
scsi_task_set_iov_out(iTask.task, (struct scsi_iovec *) iov->iov,
iov->niov);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
iTask.complete = 0;
goto retry;
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
iscsi_allocationmap_set(iscsilun, sector_num, nb_sectors);
return 0;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
static bool iscsi_allocationmap_is_allocated(IscsiLun *iscsilun,
int64_t sector_num, int nb_sectors)
{
unsigned long size;
if (iscsilun->allocationmap == NULL) {
return true;
}
size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
return !(find_next_bit(iscsilun->allocationmap, size,
sector_num / iscsilun->cluster_sectors) == size);
}
static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
int64_t sector_num,
int nb_sectors, int *pnum)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
int64_t ret;
iscsi_co_init_iscsitask(iscsilun, &iTask);
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
ret = -EINVAL;
goto out;
}
/* default to all sectors allocated */
ret = BDRV_BLOCK_DATA;
ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
*pnum = nb_sectors;
/* LUN does not support logical block provisioning */
if (iscsilun->lbpme == 0) {
goto out;
}
retry:
if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
sector_qemu2lun(sector_num, iscsilun),
8 + 16, iscsi_co_generic_cb,
&iTask) == NULL) {
ret = -ENOMEM;
goto out;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.do_retry) {
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
iTask.complete = 0;
goto retry;
}
if (iTask.status != SCSI_STATUS_GOOD) {
/* in case the get_lba_status_callout fails (i.e.
* because the device is busy or the cmd is not
* supported) we pretend all blocks are allocated
* for backwards compatibility */
goto out;
}
lbas = scsi_datain_unmarshall(iTask.task);
if (lbas == NULL) {
ret = -EIO;
goto out;
}
lbasd = &lbas->descriptors[0];
if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
ret = -EIO;
goto out;
}
*pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
ret &= ~BDRV_BLOCK_DATA;
if (iscsilun->lbprz) {
ret |= BDRV_BLOCK_ZERO;
}
}
if (ret & BDRV_BLOCK_ZERO) {
iscsi_allocationmap_clear(iscsilun, sector_num, *pnum);
} else {
iscsi_allocationmap_set(iscsilun, sector_num, *pnum);
}
if (*pnum > nb_sectors) {
*pnum = nb_sectors;
}
out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
return ret;
}
static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
QEMUIOVector *iov)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t num_sectors;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (bs->bl.max_transfer_length && nb_sectors > bs->bl.max_transfer_length) {
error_report("iSCSI Error: Read of %d sectors exceeds max_xfer_len "
"of %d sectors", nb_sectors, bs->bl.max_transfer_length);
return -EINVAL;
}
if (iscsilun->lbprz && nb_sectors >= ISCSI_CHECKALLOC_THRES &&
!iscsi_allocationmap_is_allocated(iscsilun, sector_num, nb_sectors)) {
int64_t ret;
int pnum;
ret = iscsi_co_get_block_status(bs, sector_num, INT_MAX, &pnum);
if (ret < 0) {
return ret;
}
if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
}
lba = sector_qemu2lun(sector_num, iscsilun);
num_sectors = sector_qemu2lun(nb_sectors, iscsilun);
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsilun->use_16_for_rw) {
iTask.task = iscsi_read16_task(iscsilun->iscsi, iscsilun->lun, lba,
num_sectors * iscsilun->block_size,
iscsilun->block_size, 0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
} else {
iTask.task = iscsi_read10_task(iscsilun->iscsi, iscsilun->lun, lba,
num_sectors * iscsilun->block_size,
iscsilun->block_size,
0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
}
if (iTask.task == NULL) {
return -ENOMEM;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
scsi_task_set_iov_in(iTask.task, (struct scsi_iovec *) iov->iov, iov->niov);
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
if (iTask.do_retry) {
iTask.complete = 0;
goto retry;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
return 0;
}
static int coroutine_fn iscsi_co_flush(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
if (bs->sg) {
return 0;
}
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsi_synchronizecache10_task(iscsilun->iscsi, iscsilun->lun, 0, 0, 0,
0, iscsi_co_generic_cb, &iTask) == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
if (iTask.do_retry) {
iTask.complete = 0;
goto retry;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
return 0;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
#ifdef __linux__
static void
iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status,
void *command_data, void *opaque)
{
IscsiAIOCB *acb = opaque;
g_free(acb->buf);
acb->buf = NULL;
acb->status = 0;
if (status < 0) {
error_report("Failed to ioctl(SG_IO) to iSCSI lun. %s",
iscsi_get_error(iscsi));
acb->status = -EIO;
}
acb->ioh->driver_status = 0;
acb->ioh->host_status = 0;
acb->ioh->resid = 0;
#define SG_ERR_DRIVER_SENSE 0x08
if (status == SCSI_STATUS_CHECK_CONDITION && acb->task->datain.size >= 2) {
int ss;
acb->ioh->driver_status |= SG_ERR_DRIVER_SENSE;
acb->ioh->sb_len_wr = acb->task->datain.size - 2;
ss = (acb->ioh->mx_sb_len >= acb->ioh->sb_len_wr) ?
acb->ioh->mx_sb_len : acb->ioh->sb_len_wr;
memcpy(acb->ioh->sbp, &acb->task->datain.data[2], ss);
}
iscsi_schedule_bh(acb);
}
static BlockAIOCB *iscsi_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockCompletionFunc *cb, void *opaque)
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = iscsilun->iscsi;
struct iscsi_data data;
IscsiAIOCB *acb;
assert(req == SG_IO);
acb = qemu_aio_get(&iscsi_aiocb_info, bs, cb, opaque);
acb->iscsilun = iscsilun;
acb->bh = NULL;
acb->status = -EINPROGRESS;
acb->buf = NULL;
acb->ioh = buf;
acb->task = malloc(sizeof(struct scsi_task));
if (acb->task == NULL) {
error_report("iSCSI: Failed to allocate task for scsi command. %s",
iscsi_get_error(iscsi));
qemu_aio_unref(acb);
return NULL;
}
memset(acb->task, 0, sizeof(struct scsi_task));
switch (acb->ioh->dxfer_direction) {
case SG_DXFER_TO_DEV:
acb->task->xfer_dir = SCSI_XFER_WRITE;
break;
case SG_DXFER_FROM_DEV:
acb->task->xfer_dir = SCSI_XFER_READ;
break;
default:
acb->task->xfer_dir = SCSI_XFER_NONE;
break;
}
acb->task->cdb_size = acb->ioh->cmd_len;
memcpy(&acb->task->cdb[0], acb->ioh->cmdp, acb->ioh->cmd_len);
acb->task->expxferlen = acb->ioh->dxfer_len;
data.size = 0;
if (acb->task->xfer_dir == SCSI_XFER_WRITE) {
if (acb->ioh->iovec_count == 0) {
data.data = acb->ioh->dxferp;
data.size = acb->ioh->dxfer_len;
} else {
scsi_task_set_iov_out(acb->task,
(struct scsi_iovec *) acb->ioh->dxferp,
acb->ioh->iovec_count);
}
}
if (iscsi_scsi_command_async(iscsi, iscsilun->lun, acb->task,
iscsi_aio_ioctl_cb,
(data.size > 0) ? &data : NULL,
acb) != 0) {
scsi_free_scsi_task(acb->task);
qemu_aio_unref(acb);
return NULL;
}
/* tell libiscsi to read straight into the buffer we got from ioctl */
if (acb->task->xfer_dir == SCSI_XFER_READ) {
if (acb->ioh->iovec_count == 0) {
scsi_task_add_data_in_buffer(acb->task,
acb->ioh->dxfer_len,
acb->ioh->dxferp);
} else {
scsi_task_set_iov_in(acb->task,
(struct scsi_iovec *) acb->ioh->dxferp,
acb->ioh->iovec_count);
}
}
iscsi_set_events(iscsilun);
return &acb->common;
}
static void ioctl_cb(void *opaque, int status)
{
int *p_status = opaque;
*p_status = status;
}
static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
{
IscsiLun *iscsilun = bs->opaque;
int status;
switch (req) {
case SG_GET_VERSION_NUM:
*(int *)buf = 30000;
break;
case SG_GET_SCSI_ID:
((struct sg_scsi_id *)buf)->scsi_type = iscsilun->type;
break;
case SG_IO:
status = -EINPROGRESS;
iscsi_aio_ioctl(bs, req, buf, ioctl_cb, &status);
while (status == -EINPROGRESS) {
aio_poll(iscsilun->aio_context, true);
}
return 0;
default:
return -1;
}
return 0;
}
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
static int64_t
iscsi_getlength(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
int64_t len;
len = iscsilun->num_blocks;
len *= iscsilun->block_size;
return len;
}
static int
coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
int nb_sectors)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
struct unmap_list list;
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (!iscsilun->lbp.lbpu) {
/* UNMAP is not supported by the target */
return 0;
}
list.lba = sector_qemu2lun(sector_num, iscsilun);
list.num = sector_qemu2lun(nb_sectors, iscsilun);
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsi_unmap_task(iscsilun->iscsi, iscsilun->lun, 0, 0, &list, 1,
iscsi_co_generic_cb, &iTask) == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
iTask.complete = 0;
goto retry;
}
if (iTask.status == SCSI_STATUS_CHECK_CONDITION) {
/* the target might fail with a check condition if it
is not happy with the alignment of the UNMAP request
we silently fail in this case */
return 0;
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
iscsi_allocationmap_clear(iscsilun, sector_num, nb_sectors);
return 0;
}
static int
coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t nb_blocks;
bool use_16_for_ws = iscsilun->use_16_for_rw;
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (flags & BDRV_REQ_MAY_UNMAP) {
if (!use_16_for_ws && !iscsilun->lbp.lbpws10) {
/* WRITESAME10 with UNMAP is unsupported try WRITESAME16 */
use_16_for_ws = true;
}
if (use_16_for_ws && !iscsilun->lbp.lbpws) {
/* WRITESAME16 with UNMAP is not supported by the target,
* fall back and try WRITESAME10/16 without UNMAP */
flags &= ~BDRV_REQ_MAY_UNMAP;
use_16_for_ws = iscsilun->use_16_for_rw;
}
}
if (!(flags & BDRV_REQ_MAY_UNMAP) && !iscsilun->has_write_same) {
/* WRITESAME without UNMAP is not supported by the target */
return -ENOTSUP;
}
lba = sector_qemu2lun(sector_num, iscsilun);
nb_blocks = sector_qemu2lun(nb_sectors, iscsilun);
if (iscsilun->zeroblock == NULL) {
iscsilun->zeroblock = g_try_malloc0(iscsilun->block_size);
if (iscsilun->zeroblock == NULL) {
return -ENOMEM;
}
}
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (use_16_for_ws) {
iTask.task = iscsi_writesame16_task(iscsilun->iscsi, iscsilun->lun, lba,
iscsilun->zeroblock, iscsilun->block_size,
nb_blocks, 0, !!(flags & BDRV_REQ_MAY_UNMAP),
0, 0, iscsi_co_generic_cb, &iTask);
} else {
iTask.task = iscsi_writesame10_task(iscsilun->iscsi, iscsilun->lun, lba,
iscsilun->zeroblock, iscsilun->block_size,
nb_blocks, 0, !!(flags & BDRV_REQ_MAY_UNMAP),
0, 0, iscsi_co_generic_cb, &iTask);
}
if (iTask.task == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.status == SCSI_STATUS_CHECK_CONDITION &&
iTask.task->sense.key == SCSI_SENSE_ILLEGAL_REQUEST &&
(iTask.task->sense.ascq == SCSI_SENSE_ASCQ_INVALID_OPERATION_CODE ||
iTask.task->sense.ascq == SCSI_SENSE_ASCQ_INVALID_FIELD_IN_CDB)) {
/* WRITE SAME is not supported by the target */
iscsilun->has_write_same = false;
scsi_free_scsi_task(iTask.task);
return -ENOTSUP;
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
iTask.complete = 0;
goto retry;
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
if (flags & BDRV_REQ_MAY_UNMAP) {
iscsi_allocationmap_clear(iscsilun, sector_num, nb_sectors);
} else {
iscsi_allocationmap_set(iscsilun, sector_num, nb_sectors);
}
return 0;
}
static void parse_chap(struct iscsi_context *iscsi, const char *target,
Error **errp)
{
QemuOptsList *list;
QemuOpts *opts;
const char *user = NULL;
const char *password = NULL;
list = qemu_find_opts("iscsi");
if (!list) {
return;
}
opts = qemu_opts_find(list, target);
if (opts == NULL) {
opts = QTAILQ_FIRST(&list->head);
if (!opts) {
return;
}
}
user = qemu_opt_get(opts, "user");
if (!user) {
return;
}
password = qemu_opt_get(opts, "password");
if (!password) {
error_setg(errp, "CHAP username specified but no password was given");
return;
}
if (iscsi_set_initiator_username_pwd(iscsi, user, password)) {
error_setg(errp, "Failed to set initiator username and password");
}
}
static void parse_header_digest(struct iscsi_context *iscsi, const char *target,
Error **errp)
{
QemuOptsList *list;
QemuOpts *opts;
const char *digest = NULL;
list = qemu_find_opts("iscsi");
if (!list) {
return;
}
opts = qemu_opts_find(list, target);
if (opts == NULL) {
opts = QTAILQ_FIRST(&list->head);
if (!opts) {
return;
}
}
digest = qemu_opt_get(opts, "header-digest");
if (!digest) {
return;
}
if (!strcmp(digest, "CRC32C")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_CRC32C);
} else if (!strcmp(digest, "NONE")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE);
} else if (!strcmp(digest, "CRC32C-NONE")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_CRC32C_NONE);
} else if (!strcmp(digest, "NONE-CRC32C")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE_CRC32C);
} else {
error_setg(errp, "Invalid header-digest setting : %s", digest);
}
}
static char *parse_initiator_name(const char *target)
{
QemuOptsList *list;
QemuOpts *opts;
const char *name;
char *iscsi_name;
UuidInfo *uuid_info;
list = qemu_find_opts("iscsi");
if (list) {
opts = qemu_opts_find(list, target);
if (!opts) {
opts = QTAILQ_FIRST(&list->head);
}
if (opts) {
name = qemu_opt_get(opts, "initiator-name");
if (name) {
return g_strdup(name);
}
}
}
uuid_info = qmp_query_uuid(NULL);
if (strcmp(uuid_info->UUID, UUID_NONE) == 0) {
name = qemu_get_vm_name();
} else {
name = uuid_info->UUID;
}
iscsi_name = g_strdup_printf("iqn.2008-11.org.linux-kvm%s%s",
name ? ":" : "", name ? name : "");
qapi_free_UuidInfo(uuid_info);
return iscsi_name;
}
static void iscsi_nop_timed_event(void *opaque)
{
IscsiLun *iscsilun = opaque;
if (iscsi_get_nops_in_flight(iscsilun->iscsi) > MAX_NOP_FAILURES) {
error_report("iSCSI: NOP timeout. Reconnecting...");
iscsi_reconnect(iscsilun->iscsi);
}
if (iscsi_nop_out_async(iscsilun->iscsi, NULL, NULL, 0, NULL) != 0) {
error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages.");
return;
}
timer_mod(iscsilun->nop_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + NOP_INTERVAL);
iscsi_set_events(iscsilun);
}
static void iscsi_readcapacity_sync(IscsiLun *iscsilun, Error **errp)
{
struct scsi_task *task = NULL;
struct scsi_readcapacity10 *rc10 = NULL;
struct scsi_readcapacity16 *rc16 = NULL;
int retries = ISCSI_CMD_RETRIES;
do {
if (task != NULL) {
scsi_free_scsi_task(task);
task = NULL;
}
switch (iscsilun->type) {
case TYPE_DISK:
task = iscsi_readcapacity16_sync(iscsilun->iscsi, iscsilun->lun);
if (task != NULL && task->status == SCSI_STATUS_GOOD) {
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
error_setg(errp, "iSCSI: Failed to unmarshall readcapacity16 data.");
} else {
iscsilun->block_size = rc16->block_length;
iscsilun->num_blocks = rc16->returned_lba + 1;
iscsilun->lbpme = rc16->lbpme;
iscsilun->lbprz = rc16->lbprz;
iscsilun->use_16_for_rw = (rc16->returned_lba > 0xffffffff);
}
}
break;
case TYPE_ROM:
task = iscsi_readcapacity10_sync(iscsilun->iscsi, iscsilun->lun, 0, 0);
if (task != NULL && task->status == SCSI_STATUS_GOOD) {
rc10 = scsi_datain_unmarshall(task);
if (rc10 == NULL) {
error_setg(errp, "iSCSI: Failed to unmarshall readcapacity10 data.");
} else {
iscsilun->block_size = rc10->block_size;
if (rc10->lba == 0) {
/* blank disk loaded */
iscsilun->num_blocks = 0;
} else {
iscsilun->num_blocks = rc10->lba + 1;
}
}
}
break;
default:
return;
}
} while (task != NULL && task->status == SCSI_STATUS_CHECK_CONDITION
&& task->sense.key == SCSI_SENSE_UNIT_ATTENTION
&& retries-- > 0);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
error_setg(errp, "iSCSI: failed to send readcapacity10 command.");
}
if (task) {
scsi_free_scsi_task(task);
}
}
/* TODO Convert to fine grained options */
static QemuOptsList runtime_opts = {
.name = "iscsi",
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
.name = "filename",
.type = QEMU_OPT_STRING,
.help = "URL to the iscsi image",
},
{ /* end of list */ }
},
};
static struct scsi_task *iscsi_do_inquiry(struct iscsi_context *iscsi, int lun,
int evpd, int pc, void **inq, Error **errp)
{
int full_size;
struct scsi_task *task = NULL;
task = iscsi_inquiry_sync(iscsi, lun, evpd, pc, 64);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
goto fail;
}
full_size = scsi_datain_getfullsize(task);
if (full_size > task->datain.size) {
scsi_free_scsi_task(task);
/* we need more data for the full list */
task = iscsi_inquiry_sync(iscsi, lun, evpd, pc, full_size);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
goto fail;
}
}
*inq = scsi_datain_unmarshall(task);
if (*inq == NULL) {
error_setg(errp, "iSCSI: failed to unmarshall inquiry datain blob");
goto fail_with_err;
}
return task;
fail:
error_setg(errp, "iSCSI: Inquiry command failed : %s",
iscsi_get_error(iscsi));
fail_with_err:
if (task != NULL) {
scsi_free_scsi_task(task);
}
return NULL;
}
static void iscsi_detach_aio_context(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
aio_set_fd_handler(iscsilun->aio_context,
iscsi_get_fd(iscsilun->iscsi),
NULL, NULL, NULL);
iscsilun->events = 0;
if (iscsilun->nop_timer) {
timer_del(iscsilun->nop_timer);
timer_free(iscsilun->nop_timer);
iscsilun->nop_timer = NULL;
}
}
static void iscsi_attach_aio_context(BlockDriverState *bs,
AioContext *new_context)
{
IscsiLun *iscsilun = bs->opaque;
iscsilun->aio_context = new_context;
iscsi_set_events(iscsilun);
/* Set up a timer for sending out iSCSI NOPs */
iscsilun->nop_timer = aio_timer_new(iscsilun->aio_context,
QEMU_CLOCK_REALTIME, SCALE_MS,
iscsi_nop_timed_event, iscsilun);
timer_mod(iscsilun->nop_timer,
qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + NOP_INTERVAL);
}
static bool iscsi_is_write_protected(IscsiLun *iscsilun)
{
struct scsi_task *task;
struct scsi_mode_sense *ms = NULL;
bool wrprotected = false;
task = iscsi_modesense6_sync(iscsilun->iscsi, iscsilun->lun,
1, SCSI_MODESENSE_PC_CURRENT,
0x3F, 0, 255);
if (task == NULL) {
error_report("iSCSI: Failed to send MODE_SENSE(6) command: %s",
iscsi_get_error(iscsilun->iscsi));
goto out;
}
if (task->status != SCSI_STATUS_GOOD) {
error_report("iSCSI: Failed MODE_SENSE(6), LUN assumed writable");
goto out;
}
ms = scsi_datain_unmarshall(task);
if (!ms) {
error_report("iSCSI: Failed to unmarshall MODE_SENSE(6) data: %s",
iscsi_get_error(iscsilun->iscsi));
goto out;
}
wrprotected = ms->device_specific_parameter & 0x80;
out:
if (task) {
scsi_free_scsi_task(task);
}
return wrprotected;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
/*
* We support iscsi url's on the form
* iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun>
*/
static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = NULL;
struct iscsi_url *iscsi_url = NULL;
struct scsi_task *task = NULL;
struct scsi_inquiry_standard *inq = NULL;
struct scsi_inquiry_supported_pages *inq_vpd;
char *initiator_name = NULL;
QemuOpts *opts;
Error *local_err = NULL;
const char *filename;
int i, ret = 0;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if ((BDRV_SECTOR_SIZE % 512) != 0) {
error_setg(errp, "iSCSI: Invalid BDRV_SECTOR_SIZE. "
"BDRV_SECTOR_SIZE(%lld) is not a multiple "
"of 512", BDRV_SECTOR_SIZE);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
return -EINVAL;
}
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
filename = qemu_opt_get(opts, "filename");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
iscsi_url = iscsi_parse_full_url(iscsi, filename);
if (iscsi_url == NULL) {
error_setg(errp, "Failed to parse URL : %s", filename);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
memset(iscsilun, 0, sizeof(IscsiLun));
initiator_name = parse_initiator_name(iscsi_url->target);
iscsi = iscsi_create_context(initiator_name);
if (iscsi == NULL) {
error_setg(errp, "iSCSI: Failed to create iSCSI context.");
ret = -ENOMEM;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (iscsi_set_targetname(iscsi, iscsi_url->target)) {
error_setg(errp, "iSCSI: Failed to set target name.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
if (iscsi_url->user[0] != '\0') {
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = iscsi_set_initiator_username_pwd(iscsi, iscsi_url->user,
iscsi_url->passwd);
if (ret != 0) {
error_setg(errp, "Failed to set initiator username and password");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
}
/* check if we got CHAP username/password via the options */
parse_chap(iscsi, iscsi_url->target, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (iscsi_set_session_type(iscsi, ISCSI_SESSION_NORMAL) != 0) {
error_setg(errp, "iSCSI: Failed to set session type to normal.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE_CRC32C);
/* check if we got HEADER_DIGEST via the options */
parse_header_digest(iscsi, iscsi_url->target, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
if (iscsi_full_connect_sync(iscsi, iscsi_url->portal, iscsi_url->lun) != 0) {
error_setg(errp, "iSCSI: Failed to connect to LUN : %s",
iscsi_get_error(iscsi));
ret = -EINVAL;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
iscsilun->iscsi = iscsi;
iscsilun->aio_context = bdrv_get_aio_context(bs);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
iscsilun->lun = iscsi_url->lun;
iscsilun->has_write_same = true;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 0, 0,
(void **) &inq, errp);
if (task == NULL) {
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
iscsilun->type = inq->periperal_device_type;
scsi_free_scsi_task(task);
task = NULL;
iscsilun->write_protected = iscsi_is_write_protected(iscsilun);
/* Check the write protect flag of the LUN if we want to write */
if (iscsilun->type == TYPE_DISK && (flags & BDRV_O_RDWR) &&
iscsilun->write_protected) {
error_setg(errp, "Cannot open a write protected LUN as read-write");
ret = -EACCES;
goto out;
}
iscsi_readcapacity_sync(iscsilun, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
bs->total_sectors = sector_lun2qemu(iscsilun->num_blocks, iscsilun);
bs->request_alignment = iscsilun->block_size;
/* We don't have any emulation for devices other than disks and CD-ROMs, so
* this must be sg ioctl compatible. We force it to be sg, otherwise qemu
* will try to read from the device to guess the image format.
*/
if (iscsilun->type != TYPE_DISK && iscsilun->type != TYPE_ROM) {
bs->sg = 1;
}
task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_SUPPORTED_VPD_PAGES,
(void **) &inq_vpd, errp);
if (task == NULL) {
ret = -EINVAL;
goto out;
}
for (i = 0; i < inq_vpd->num_pages; i++) {
struct scsi_task *inq_task;
struct scsi_inquiry_logical_block_provisioning *inq_lbp;
struct scsi_inquiry_block_limits *inq_bl;
switch (inq_vpd->pages[i]) {
case SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING:
inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING,
(void **) &inq_lbp, errp);
if (inq_task == NULL) {
ret = -EINVAL;
goto out;
}
memcpy(&iscsilun->lbp, inq_lbp,
sizeof(struct scsi_inquiry_logical_block_provisioning));
scsi_free_scsi_task(inq_task);
break;
case SCSI_INQUIRY_PAGECODE_BLOCK_LIMITS:
inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_BLOCK_LIMITS,
(void **) &inq_bl, errp);
if (inq_task == NULL) {
ret = -EINVAL;
goto out;
}
memcpy(&iscsilun->bl, inq_bl,
sizeof(struct scsi_inquiry_block_limits));
scsi_free_scsi_task(inq_task);
break;
default:
break;
}
}
scsi_free_scsi_task(task);
task = NULL;
iscsi_attach_aio_context(bs, iscsilun->aio_context);
/* Guess the internal cluster (page) size of the iscsi target by the means
* of opt_unmap_gran. Transfer the unmap granularity only if it has a
* reasonable size */
if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
iscsilun->block_size) >> BDRV_SECTOR_BITS;
if (iscsilun->lbprz && !(bs->open_flags & BDRV_O_NOCACHE)) {
iscsilun->allocationmap = iscsi_allocationmap_init(iscsilun);
if (iscsilun->allocationmap == NULL) {
ret = -ENOMEM;
}
}
}
out:
qemu_opts_del(opts);
g_free(initiator_name);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
if (iscsi_url != NULL) {
iscsi_destroy_url(iscsi_url);
}
if (task != NULL) {
scsi_free_scsi_task(task);
}
if (ret) {
if (iscsi != NULL) {
iscsi_destroy_context(iscsi);
}
memset(iscsilun, 0, sizeof(IscsiLun));
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
return ret;
}
static void iscsi_close(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = iscsilun->iscsi;
iscsi_detach_aio_context(bs);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
iscsi_destroy_context(iscsi);
g_free(iscsilun->zeroblock);
g_free(iscsilun->allocationmap);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
memset(iscsilun, 0, sizeof(IscsiLun));
}
static int sector_limits_lun2qemu(int64_t sector, IscsiLun *iscsilun)
{
return MIN(sector_lun2qemu(sector, iscsilun), INT_MAX / 2 + 1);
}
static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
{
/* We don't actually refresh here, but just return data queried in
* iscsi_open(): iscsi targets don't change their limits. */
IscsiLun *iscsilun = bs->opaque;
uint32_t max_xfer_len = iscsilun->use_16_for_rw ? 0xffffffff : 0xffff;
if (iscsilun->bl.max_xfer_len) {
max_xfer_len = MIN(max_xfer_len, iscsilun->bl.max_xfer_len);
}
bs->bl.max_transfer_length = sector_limits_lun2qemu(max_xfer_len, iscsilun);
if (iscsilun->lbp.lbpu) {
if (iscsilun->bl.max_unmap < 0xffffffff) {
bs->bl.max_discard =
sector_limits_lun2qemu(iscsilun->bl.max_unmap, iscsilun);
}
bs->bl.discard_alignment =
sector_limits_lun2qemu(iscsilun->bl.opt_unmap_gran, iscsilun);
}
if (iscsilun->bl.max_ws_len < 0xffffffff) {
bs->bl.max_write_zeroes =
sector_limits_lun2qemu(iscsilun->bl.max_ws_len, iscsilun);
}
if (iscsilun->lbp.lbpws) {
bs->bl.write_zeroes_alignment =
sector_limits_lun2qemu(iscsilun->bl.opt_unmap_gran, iscsilun);
}
bs->bl.opt_transfer_length =
sector_limits_lun2qemu(iscsilun->bl.opt_xfer_len, iscsilun);
}
/* Note that this will not re-establish a connection with an iSCSI target - it
* is effectively a NOP. */
static int iscsi_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
IscsiLun *iscsilun = state->bs->opaque;
if (state->flags & BDRV_O_RDWR && iscsilun->write_protected) {
error_setg(errp, "Cannot open a write protected LUN as read-write");
return -EACCES;
}
return 0;
}
static int iscsi_truncate(BlockDriverState *bs, int64_t offset)
{
IscsiLun *iscsilun = bs->opaque;
Error *local_err = NULL;
if (iscsilun->type != TYPE_DISK) {
return -ENOTSUP;
}
iscsi_readcapacity_sync(iscsilun, &local_err);
if (local_err != NULL) {
error_free(local_err);
return -EIO;
}
if (offset > iscsi_getlength(bs)) {
return -EINVAL;
}
if (iscsilun->allocationmap != NULL) {
g_free(iscsilun->allocationmap);
iscsilun->allocationmap = iscsi_allocationmap_init(iscsilun);
}
return 0;
}
static int iscsi_create(const char *filename, QemuOpts *opts, Error **errp)
{
int ret = 0;
int64_t total_size = 0;
BlockDriverState *bs;
IscsiLun *iscsilun = NULL;
QDict *bs_options;
bs = bdrv_new();
/* Read out options */
total_size = DIV_ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0),
BDRV_SECTOR_SIZE);
bs->opaque = g_new0(struct IscsiLun, 1);
iscsilun = bs->opaque;
bs_options = qdict_new();
qdict_put(bs_options, "filename", qstring_from_str(filename));
ret = iscsi_open(bs, bs_options, 0, NULL);
QDECREF(bs_options);
if (ret != 0) {
goto out;
}
iscsi_detach_aio_context(bs);
if (iscsilun->type != TYPE_DISK) {
ret = -ENODEV;
goto out;
}
if (bs->total_sectors < total_size) {
ret = -ENOSPC;
goto out;
}
ret = 0;
out:
if (iscsilun->iscsi != NULL) {
iscsi_destroy_context(iscsilun->iscsi);
}
g_free(bs->opaque);
bs->opaque = NULL;
bdrv_unref(bs);
return ret;
}
static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
IscsiLun *iscsilun = bs->opaque;
bdi->unallocated_blocks_are_zero = !!iscsilun->lbprz;
bdi->can_write_zeroes_with_unmap = iscsilun->lbprz && iscsilun->lbp.lbpws;
bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
return 0;
}
static QemuOptsList iscsi_create_opts = {
.name = "iscsi-create-opts",
.head = QTAILQ_HEAD_INITIALIZER(iscsi_create_opts.head),
.desc = {
{
.name = BLOCK_OPT_SIZE,
.type = QEMU_OPT_SIZE,
.help = "Virtual disk size"
},
{ /* end of list */ }
}
};
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
static BlockDriver bdrv_iscsi = {
.format_name = "iscsi",
.protocol_name = "iscsi",
.instance_size = sizeof(IscsiLun),
.bdrv_needs_filename = true,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
.bdrv_file_open = iscsi_open,
.bdrv_close = iscsi_close,
.bdrv_create = iscsi_create,
.create_opts = &iscsi_create_opts,
.bdrv_reopen_prepare = iscsi_reopen_prepare,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
.bdrv_getlength = iscsi_getlength,
.bdrv_get_info = iscsi_get_info,
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
.bdrv_co_get_block_status = iscsi_co_get_block_status,
.bdrv_co_discard = iscsi_co_discard,
.bdrv_co_write_zeroes = iscsi_co_write_zeroes,
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev = iscsi_co_writev,
.bdrv_co_flush_to_disk = iscsi_co_flush,
#ifdef __linux__
.bdrv_ioctl = iscsi_ioctl,
.bdrv_aio_ioctl = iscsi_aio_ioctl,
#endif
.bdrv_detach_aio_context = iscsi_detach_aio_context,
.bdrv_attach_aio_context = iscsi_attach_aio_context,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
};
static QemuOptsList qemu_iscsi_opts = {
.name = "iscsi",
.head = QTAILQ_HEAD_INITIALIZER(qemu_iscsi_opts.head),
.desc = {
{
.name = "user",
.type = QEMU_OPT_STRING,
.help = "username for CHAP authentication to target",
},{
.name = "password",
.type = QEMU_OPT_STRING,
.help = "password for CHAP authentication to target",
},{
.name = "header-digest",
.type = QEMU_OPT_STRING,
.help = "HeaderDigest setting. "
"{CRC32C|CRC32C-NONE|NONE-CRC32C|NONE}",
},{
.name = "initiator-name",
.type = QEMU_OPT_STRING,
.help = "Initiator iqn name to use when connecting",
},
{ /* end of list */ }
},
};
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
static void iscsi_block_init(void)
{
bdrv_register(&bdrv_iscsi);
qemu_add_opts(&qemu_iscsi_opts);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 16:24:24 +08:00
}
block_init(iscsi_block_init);