2010-01-08 02:27:49 +08:00
|
|
|
- SeaBIOS (bios.bin) is the successor of pc bios.
|
|
|
|
|
See http://www.seabios.org/ for more information.
|
2008-12-20 00:22:03 +08:00
|
|
|
|
2004-06-25 23:02:13 +08:00
|
|
|
- The VGA BIOS and the Cirrus VGA BIOS come from the LGPL VGA bios
|
2009-09-04 23:13:29 +08:00
|
|
|
project (http://www.nongnu.org/vgabios/).
|
2004-07-11 00:57:29 +08:00
|
|
|
|
2006-06-14 20:36:32 +08:00
|
|
|
- OpenBIOS (http://www.openbios.org/) is a free (GPL v2) portable
|
|
|
|
|
firmware implementation. The goal is to implement a 100% IEEE
|
|
|
|
|
1275-1994 (referred to as Open Firmware) compliant firmware.
|
2011-08-30 05:13:29 +08:00
|
|
|
The included images for PowerPC (for 32 and 64 bit PPC CPUs),
|
2013-10-16 04:03:04 +08:00
|
|
|
Sparc32 (including QEMU,tcx.bin and QEMU,cgthree.bin) and Sparc64 are built
|
2014-03-10 16:48:31 +08:00
|
|
|
from OpenBIOS SVN revision 1280.
|
2007-01-06 01:41:07 +08:00
|
|
|
|
Add SLOF-based partition firmware for pSeries machine, allowing more boot options
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel. This
means booting from the virtual disk, cdrom or network is not possible.
This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.
In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary. Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.
This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS. Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 12:15:34 +08:00
|
|
|
- SLOF (Slimline Open Firmware) is a free IEEE 1275 Open Firmware
|
|
|
|
|
implementation for certain IBM POWER hardware. The sources are at
|
2013-04-30 11:42:23 +08:00
|
|
|
https://github.com/aik/SLOF, and the image currently in qemu is
|
2020-03-27 10:57:29 +08:00
|
|
|
built from git tag qemu-slof-20200327.
|
Add SLOF-based partition firmware for pSeries machine, allowing more boot options
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel. This
means booting from the virtual disk, cdrom or network is not possible.
This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.
In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary. Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.
This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS. Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 12:15:34 +08:00
|
|
|
|
2011-11-03 22:14:00 +08:00
|
|
|
- sgabios (the Serial Graphics Adapter option ROM) provides a means for
|
|
|
|
|
legacy x86 software to communicate with an attached serial console as
|
|
|
|
|
if a video card were attached. The master sources reside in a subversion
|
|
|
|
|
repository at http://sgabios.googlecode.com/svn/trunk. A git mirror is
|
2018-11-08 19:15:24 +08:00
|
|
|
available at https://git.qemu.org/git/sgabios.git.
|
2011-11-03 22:14:00 +08:00
|
|
|
|
2011-04-19 01:46:41 +08:00
|
|
|
- The PXE roms come from the iPXE project. Built with BANNER_TIME 0.
|
|
|
|
|
Sources available at http://ipxe.org. Vendor:Device ID -> ROM mapping:
|
|
|
|
|
|
|
|
|
|
8086:100e -> pxe-e1000.rom
|
|
|
|
|
8086:1209 -> pxe-eepro100.rom
|
|
|
|
|
1050:0940 -> pxe-ne2k_pci.rom
|
|
|
|
|
1022:2000 -> pxe-pcnet.rom
|
|
|
|
|
10ec:8139 -> pxe-rtl8139.rom
|
|
|
|
|
1af4:1000 -> pxe-virtio.rom
|
2010-04-21 01:37:13 +08:00
|
|
|
|
2011-06-25 02:58:37 +08:00
|
|
|
- The sources for the Alpha palcode image is available from:
|
2018-11-08 19:15:30 +08:00
|
|
|
https://github.com/rth7680/qemu-palcode.git
|
2014-01-20 07:25:40 +08:00
|
|
|
|
|
|
|
|
- The u-boot binary for e500 comes from the upstream denx u-boot project where
|
|
|
|
|
it was compiled using the qemu-ppce500 target.
|
2018-11-08 19:15:24 +08:00
|
|
|
A git mirror is available at: https://git.qemu.org/git/u-boot.git
|
2014-01-20 07:25:40 +08:00
|
|
|
The hash used to compile the current version is: 2072e72
|
2016-10-22 17:46:34 +08:00
|
|
|
|
|
|
|
|
- Skiboot (https://github.com/open-power/skiboot/) is an OPAL
|
|
|
|
|
(OpenPower Abstraction Layer) firmware for OpenPOWER systems. It can
|
|
|
|
|
run an hypervisor OS or simply a host OS on the "baremetal"
|
|
|
|
|
platform, also known as the PowerNV (Non-Virtualized) platform.
|
2017-05-01 21:43:30 +08:00
|
|
|
|
|
|
|
|
- QemuMacDrivers (https://github.com/ozbenh/QemuMacDrivers) is a project to
|
|
|
|
|
provide virtualised drivers for PPC MacOS guests.
|
2019-03-08 07:24:14 +08:00
|
|
|
|
|
|
|
|
- The "edk2-*.fd.bz2" images are platform firmware binaries and matching UEFI
|
|
|
|
|
variable store templates built from the TianoCore community's EFI Development
|
|
|
|
|
Kit II project
|
|
|
|
|
<https://github.com/tianocore/tianocore.github.io/wiki/EDK-II>. The images
|
2019-06-06 18:49:02 +08:00
|
|
|
were built at git tag "edk2-stable201905". The firmware binaries bundle parts
|
|
|
|
|
of the OpenSSL project, at git tag "OpenSSL_1_1_1b" (the OpenSSL tag is a
|
|
|
|
|
function of the edk2 tag). Parts of the Berkeley SoftFloat library are
|
|
|
|
|
bundled as well, at Release 3e plus a subsequent typo fix (commit
|
|
|
|
|
b64af41c3276f97f0e181920400ee056b9c88037), as an OpenSSL dependency on 32-bit
|
|
|
|
|
ARM. Licensing information is given in "edk2-licenses.txt". The image files
|
|
|
|
|
are described by the JSON documents in the "pc-bios/descriptors" directory,
|
|
|
|
|
which conform to the "docs/interop/firmware.json" schema.
|
2019-07-17 02:47:22 +08:00
|
|
|
|
|
|
|
|
- OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
|
|
|
|
|
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
|
|
|
|
|
specifications for platform-specific firmwares executing in M-mode. For all
|
|
|
|
|
supported platforms, OpenSBI provides several runtime firmware examples.
|
|
|
|
|
These example firmwares can be used to replace the legacy riscv-pk bootloader
|
|
|
|
|
and enable the use of well-known bootloaders such as U-Boot.
|
|
|
|
|
OpenSBI is distributed under the terms of the BSD 2-clause license
|
|
|
|
|
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
|
|
|
|
|
source code also contains code reused from other projects desribed here:
|
|
|
|
|
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
|
