mirrors/php-src
0
0
Fork 0
mirror of https://github.com/php/php-src.git synced 2024-11-30 05:13:56 +08:00
Code Issues Packages Projects Releases Wiki Activity
62de2d7366
php-src/win32/install.txt

1625 lines
67 KiB
Plaintext
Raw Blame History

Installing PHP
_________________________________________________________________
Table of Contents
Preface
1. General Installation Considerations
2. Installation on Windows systems
Windows Installer
Manual Installation Steps
ActiveScript
Microsoft IIS / PWS
Apache 1.3.x on Microsoft Windows
Apache 2.0.x on Microsoft Windows
Sun, iPlanet and Netscape servers on Microsoft Windows
OmniHTTPd Server
Sambar Server on Microsoft Windows
Xitami on Microsoft Windows
Installation of extensions on Windows
3. Installation of PECL extensions
Introduction to PECL Installations
Downloading PECL extensions
PECL for Windows users
Compiling shared PECL extensions with PEAR
Compiling shared PECL extensions with phpize
Compiling PECL extensions statically into PHP
4. Problems?
Read the FAQ
Other problems
Bug reports
5. Runtime Configuration
The configuration file
How to change configuration settings
_________________________________________________________________
Preface
These installation instructions were generated from the HTML version
of the PHP Manual so formatting and linking have been altered. See the
online and updated version at: http://php.net/install.windows
_________________________________________________________________
Chapter 1. General Installation Considerations
Before starting the installation, first you need to know what do you
want to use PHP for. There are three main fields you can use PHP, as
described in the What can PHP do? section:
* Server-side scripting
* Command line scripting
* Client-side GUI applications
For the first and most common form, you need three things: PHP itself,
a web server and a web browser. You probably already have a web
browser, and depending on your operating system setup, you may also
have a web server (e.g. Apache on Linux and MacOS X; IIS on Windows).
You may also rent webspace at a company. This way, you don't need to
set up anything on your own, only write your PHP scripts, upload it to
the server you rent, and see the results in your browser.
While setting up the server and PHP on your own, you have two choices
for the method of connecting PHP to the server. For many servers PHP
has a direct module interface (also called SAPI). These servers
include Apache, Microsoft Internet Information Server, Netscape and
iPlanet servers. Many other servers have support for ISAPI, the
Microsoft module interface (OmniHTTPd for example). If PHP has no
module support for your web server, you can always use it as a CGI or
FastCGI processor. This means you set up your server to use the CGI
executable of PHP to process all PHP file requests on the server.
If you are also interested to use PHP for command line scripting (e.g.
write scripts autogenerating some images for you offline, or
processing text files depending on some arguments you pass to them),
you always need the command line executable. For more information,
read the section about writing command line PHP applications. In this
case, you need no server and no browser.
With PHP you can also write desktop GUI applications using the PHP-GTK
extension. This is a completely different approach than writing web
pages, as you do not output any HTML, but manage windows and objects
within them. For more information about PHP-GTK, please visit the site
dedicated to this extension. PHP-GTK is not included in the official
PHP distribution.
From now on, this section deals with setting up PHP for web servers on
Unix and Windows with server module interfaces and CGI executables.
You will also find information on the command line executable in the
following sections.
PHP source code and binary distributions for Windows can be found at
http://www.php.net/downloads.php. We recommend you to choose a mirror
nearest to you for downloading the distributions.
_________________________________________________________________
Chapter 2. Installation on Windows systems
This section applies to Windows 98/Me and Windows NT/2000/XP/2003. PHP
will not work on 16 bit platforms such as Windows 3.1 and sometimes we
refer to the supported Windows platforms as Win32. Windows 95 is no
longer supported as of PHP 4.3.0.
There are two main ways to install PHP for Windows: either manually or
by using the installer.
If you have Microsoft Visual Studio, you can also build PHP from the
original source code.
Once you have PHP installed on your Windows system, you may also want
to load various extensions for added functionality.
Warning
There are several all-in-one installers over the Internet, but none of
those are endorsed by PHP.net, as we believe that the manual
installation is the best choice to have your system secure and
optimised.
_________________________________________________________________
Windows Installer
The Windows PHP installer is available from the downloads page at
http://www.php.net/downloads.php. This installs the CGI version of PHP
and for IIS, PWS, and Xitami, it configures the web server as well.
The installer does not include any extra external PHP extensions
(php_*.dll) as you'll only find those in the Windows Zip Package and
PECL downloads.
Note: While the Windows installer is an easy way to make PHP work,
it is restricted in many aspects as, for example, the automatic
setup of extensions is not supported. Use of the installer isn't
the preferred method for installing PHP.
First, install your selected HTTP (web) server on your system, and
make sure that it works.
Run the executable installer and follow the instructions provided by
the installation wizard. Two types of installation are supported -
standard, which provides sensible defaults for all the settings it
can, and advanced, which asks questions as it goes along.
The installation wizard gathers enough information to set up the
php.ini file, and configure certain web servers to use PHP. One of the
web servers the PHP installer does not configure for is Apache, so
you'll need to configure it manually.
Once the installation has completed, the installer will inform you if
you need to restart your system, restart the server, or just start
using PHP.
Warning
Be aware, that this setup of PHP is not secure. If you would like to
have a secure PHP setup, you'd better go on the manual way, and set
every option carefully. This automatically working setup gives you an
instantly working PHP installation, but it is not meant to be used on
online servers.
_________________________________________________________________
Manual Installation Steps
This install guide will help you manually install and configure PHP
with a web server on Microsoft Windows. To get started you'll need to
download the zip binary distribution from the downloads page at
http://www.php.net/downloads.php.
Although there are many all-in-one installation kits, and we also
distribute a PHP installer for Microsoft Windows, we recommend you
take the time to setup PHP yourself as this will provide you with a
better understanding of the system, and enables you to install PHP
extensions easily when needed.
Upgrading from a previous PHP version: Previous editions of the
manual suggest moving various ini and DLL files into your SYSTEM
(i.e. C:\WINDOWS) folder and while this simplifies the installation
procedure it makes upgrading difficult. We advise you remove all of
these files (like php.ini and PHP related DLLs from the Windows
SYSTEM folder) before moving on with a new PHP installation. Be
sure to backup these files as you might break the entire system.
The old php.ini might be useful in setting up the new PHP as well.
And as you'll soon learn, the preferred method for installing PHP
is to keep all PHP related files in one directory and have this
directory available to your systems PATH.
MDAC requirements: If you use Microsoft Windows 98/NT4 download the
latest version of the Microsoft Data Access Components (MDAC) for
your platform. MDAC is available at
http://msdn.microsoft.com/data/. This requirement exists because
ODBC is built into the distributed Windows binaries.
The following steps should be completed on all installations before
any server specific instructions are performed:
Extract the distribution file into a directory of your choice. If you
are installing PHP 4, extract to C:\, as the zip file expands to a
foldername like php-4.3.7-Win32. If you are installing PHP 5, extract
to C:\php as the zip file doesn't expand as in PHP 4. You may choose a
different location but do not have spaces in the path (like C:\Program
Files\PHP) as some web servers will crash if you do.
The directory structure extracted from the zip is different for PHP
versions 4 and 5 and look like as follows:
Example 2-1. PHP 4 package structure
c:\php
|
+--cli
| |
| |-php.exe -- CLI executable - ONLY for commandline scripting
|
+--dlls -- support DLLs required by some extensions
| |
| |-expat.dll
| |
| |-fdftk.dll
| |
| |-...
|
+--extensions -- extension DLLs for PHP
| |
| |-php_bz2.dll
| |
| |-php_cpdf.dll
| |
| |-..
|
+--mibs -- support files for SNMP
|
+--openssl -- support files for Openssl
|
+--pdf-related -- support files for PDF
|
+--sapi -- SAPI (server module support) DLLs
| |
| |-php4activescript.dll
| |
| |-php4apache.dll
| |
| |-php4apache2.dll
| |
| |-..
|
+--PEAR -- initial copy of PEAR
|
|
|-go-pear.bat -- PEAR setup script
|
|-..
|
|-php.exe -- CGI executable
|
|-..
|
|-php.ini-dist -- default php.ini settings
|
|-php.ini-recommended -- recommended php.ini settings
|
|-php4ts.dll -- core PHP DLL
|
|-...
Or:
Example 2-2. PHP 5 package structure
c:\php
|
+--dev
| |
| |-php5ts.lib
|
+--ext -- extension DLLs for PHP
| |
| |-php_bz2.dll
| |
| |-php_cpdf.dll
| |
| |-..
|
+--extras
| |
| +--mibs -- support files for SNMP
| |
| +--openssl -- support files for Openssl
| |
| +--pdf-related -- support files for PDF
| |
| |-mime.magic
|
+--pear -- initial copy of PEAR
|
|
|-go-pear.bat -- PEAR setup script
|
|-fdftk.dll
|
|-..
|
|-php-cgi.exe -- CGI executable
|
|-php-win.exe -- executes scripts without an opened command prompt
|
|-php.exe -- CLI executable - ONLY for command line scripting
|
|-..
|
|-php.ini-dist -- default php.ini settings
|
|-php.ini-recommended -- recommended php.ini settings
|
|-php5activescript.dll
|
|-php5apache.dll
|
|-php5apache2.dll
|
|-..
|
|-php5ts.dll -- core PHP DLL
|
|-...
Notice the differences and similarities. Both PHP 4 and PHP 5 have a
CGI executable, a CLI executable, and server modules, but they are
located in different folders and/or have different names. While PHP 4
packages have the server modules in the sapi folder, PHP 5
distributions have no such directory and instead they're in the PHP
folder root. The supporting DLLs for the PHP 5 extensions are also not
in a seperate directory.
Note: In PHP 4, you should move all files located in the dll and
sapi folders to the main folder (e.g. C:\php).
Here is a list of server modules shipped with PHP 4 and PHP 5:
* sapi/php4activescript.dll (php5activescript.dll) - ActiveScript
engine, allowing you to embed PHP in your Windows applications.
* sapi/php4apache.dll (php5apache.dll) - Apache 1.3.x module.
* sapi/php4apache2.dll (php5apache2.dll) - Apache 2.0.x module.
* sapi/php4isapi.dll (php5isapi.dll) - ISAPI Module for ISAPI
compliant web servers like IIS 4.0/PWS 4.0 or newer.
* sapi/php4nsapi.dll (php5nsapi.dll) - Sun/iPlanet/Netscape server
module.
* sapi/php4pi3web.dll (no equivalent in PHP 5) - Pi3Web server
module.
Server modules provide significantly better performance and additional
functionality compared to the CGI binary. The CLI version is designed
to let you use PHP for command line scripting. More information about
CLI is available in the chapter about using PHP from the command line.
Warning
The SAPI modules have been significantly improved as of the 4.1
release, however, in older systems you may encounter server errors or
other server modules failing, such as ASP.
The CGI and CLI binaries, and the web server modules all require the
php4ts.dll (php5ts.dll) file to be available to them. You have to make
sure that this file can be found by your PHP installation. The search
order for this DLL is as follows:
* The same directory from where php.exe is called, or in case you
use a SAPI module, the web server's directory (e.g. C:\Program
Files\Apache Group\Apache2\bin).
* Any directory in your Windows PATH environment variable.
To make php4ts.dll / php5ts.dll available you have three options: copy
the file to the Windows system directory, copy the file to the web
server's directory, or add your PHP directory, C:\php to the PATH. For
better maintenance, we advise you to follow the last option, add
C:\php to the PATH, because it will be simpler to upgrade PHP in the
future. Read more about how to add your PHP directory to PATH in the
corresponding FAQ entry.
The next step is to set up a valid configuration file for PHP,
php.ini. There are two ini files distributed in the zip file,
php.ini-dist and php.ini-recommended. We advise you to use
php.ini-recommended, because we optimized the default settings in this
file for performance, and security. Read this well documented file
carefully because it has changes from php.ini-dist that will
drastically affect your setup. Some examples are display_errors being
off and magic_quotes_gpc being off. In addition to reading these,
study the ini settings and set every element manually yourself. If you
would like to achieve the best security, then this is the way for you,
although PHP works fine with these default ini files. Copy your chosen
ini-file to a directory that PHP is able to find and rename it to
php.ini. PHP searches for php.ini in the following locations (in
order):
* PHPIniDir directive (Apache 2 module only)
* HKEY_LOCAL_MACHINE\SOFTWARE\PHP\IniFilePath
* The PHPRC environment variable
* Directory of PHP (for CLI), or the web server's directory (for
SAPI modules)
* Windows directory (C:\windows or C:\winnt)
If you are running Apache 2, the simpler option is to use the
PHPIniDir directive (read the installation on Apache 2 page),
otherwise your best option is to set the PHPRC environment variable.
This process is explained in the following FAQ entry.
Note: If you're using NTFS on Windows NT, 2000, XP or 2003, make
sure that the user running the web server has read permissions to
your php.ini (e.g. make it readable by Everyone).
The following steps are optional:
* Edit your new php.ini file. If you plan to use OmniHTTPd, do not
follow the next step. Set the doc_root to point to your web
servers document_root. For example:
doc_root = c:\inetpub\wwwroot // for IIS/PWS
doc_root = c:\apache\htdocs // for Apache
* Choose the extensions you would like to load when PHP starts. See
the section about Windows extensions, about how to set up one, and
what is already built in. Note that on a new installation it is
advisable to first get PHP working and tested without any
extensions before enabling them in php.ini.
* On PWS and IIS, you can set the browscap configuration setting to
point to: c:\windows\system\inetsrv\browscap.ini on Windows 9x/Me,
c:\winnt\system32\inetsrv\browscap.ini on NT/2000, and
c:\windows\system32\inetsrv\browscap.ini on XP. For an up-to-date
browscap.ini, read the following FAQ.
PHP is now setup on your system. The next step is to choose a web
server, and enable it to run PHP. Choose a webserver from the table of
contents.
_________________________________________________________________
ActiveScript
This section contains notes specific to the ActiveScript installation.
ActiveScript is a windows only SAPI that enables you to use PHP script
in any ActiveScript compliant host, like Windows Script Host,
ASP/ASP.NET, Windows Script Components or Microsoft Scriptlet control.
As of PHP 5.0.1, ActiveScript has been moved to the PECL repository.
You may download this PECL extension DLL from the PHP Downloads page
or at http://snaps.php.net/.
Note: You should read the manual installation steps first!
After installing PHP, you should download the ActiveScript DLL
(php5activescript.dll) and place it in the main PHP folder (e.g.
C:\php).
After having all the files needed, you must register the DLL on your
system. To achieve this, open a Command Prompt window (located in the
Start Menu). Then go to your PHP directory by typing something like cd
C:\php. To register the DLL just type regsvr32 php5activescript.dll.
To test if ActiveScript is working, create a new file, named test.wsf
(the extension is very important) and type:
<job id="test">
<script language="PHPScript">
$WScript->Echo("Hello World!");
</script>
</job>
Save and double-click on the file. If you receive a little window
saying "Hello World!" you're done.
Note: ActiveScript doesn't use the default php.ini file. Instead,
it will look only in the same directory as the .exe that caused it
to load. You should create php-activescript.ini and place it in
that folder, if you wish to load extensions, etc.
_________________________________________________________________
Microsoft IIS / PWS
This section contains notes and hints specific to IIS (Microsoft
Internet Information Server).
Warning
By using the CGI setup, your server is open to several possible
attacks. Please read our CGI security section to learn how to defend
yourself from those attacks.
_________________________________________________________________
General considerations for all installations of PHP with IIS
* First, read the Manual Installation Instructions. Do not skip this
step as it provides crucial information for installing PHP on
Windows.
* CGI users must set the cgi.force_redirect PHP directive to 0
inside php.ini. Read the faq on cgi.force_redirect for important
details. Also, CGI users should set the cgi.redirect_status_env
directive to ENV_VAR_NAME. Be sure these directives aren't
commented out inside php.ini.
* The PHP 4 CGI is named php.exe while in PHP 5 it's php-cgi.exe. In
PHP 5, php.exe is the CLI, and not the CGI.
* Modify the Windows PATH environment variable to include the PHP
directory. This way the PHP DLL files, PHP executables, and
php.ini can all remain in the PHP directory without cluttering up
the Windows system directory. For more details, see the FAQ on
Setting the PATH.
* Be sure the extension_dir and doc_root PHP directives are
appropriately set in php.ini. These directives depend on the
system that PHP is being installed on. In PHP 4, the extension_dir
is extensions while with PHP 5 it's ext. So, an example PHP 5
extensions_dir value is "c:\php\ext" and an example IIS doc_root
value is "c:\Inetpub\wwwroot".
* PHP extension DLL files, such as php_mysql.dll and php_curl.dll,
are found in the zip package of the PHP download (not the PHP
installer). In PHP 5, many extensions are part of PECL and can be
downloaded in the "Collection of PECL modules" package. Files such
as php_zip.dll and php_ssh2.dll. Download PHP files here.
* When defining the executable, the 'check that file exists' box may
also be checked. For a small performance penalty, the IIS (or PWS)
will check that the script file exists and sort out authentication
before firing up PHP. This means that the web server will provide
sensible 404 style error messages instead of CGI errors
complaining that PHP did not output any data.
_________________________________________________________________
Windows NT/200x/XP and IIS 4 or newer
PHP may be installed as a CGI binary, or with the ISAPI module. In
either case, you need to start the Microsoft Management Console (may
appear as 'Internet Services Manager', either in your Windows NT 4.0
Option Pack branch or the Control Panel=>Administrative Tools under
Windows 2000/XP). Then right click on your Web server node (this will
most probably appear as 'Default Web Server'), and select
'Properties'.
If you want to use the CGI binary, do the following:
* Under 'Home Directory', 'Virtual Directory', or 'Directory', do
the following:
* Change the Execute Permissions to 'Scripts only'
* Click on the 'Configuration' button, and choose the Application
Mappings tab. Click Add and set the Executable path to the
appropriate CGI file. An example PHP 5 value is:
C:\php\php-cgi.exe Supply .php as the extension. Leave 'Method
exclusions' blank, and check the 'Script engine' checkbox. Now,
click OK a few times.
* Set up the appropriate security. (This is done in Internet Service
Manager), and if your NT Server uses NTFS file system, add execute
rights for I_USR_ to the directory that contains php.exe /
php-cgi.exe.
To use the ISAPI module, do the following:
* If you don't want to perform HTTP Authentication using PHP, you
can (and should) skip this step. Under ISAPI Filters, add a new
ISAPI filter. Use PHP as the filter name, and supply a path to the
php4isapi.dll / php5isapi.dll.
* Under 'Home Directory', 'Virtual Directory', or 'Directory', do
the following:
* Change the Execute Permissions to 'Scripts only'
* Click on the 'Configuration' button, and choose the Application
Mappings tab. Click Add and set the Executable path to the
appropriate ISAPI DLL. An example PHP 5 value is:
C:\php\php5isapi.dll Supply .php as the extension. Leave 'Method
exclusions' blank, and check the 'Script engine' checkbox. Now,
click OK a few times.
* Stop IIS completely (NET STOP iisadmin)
* Start IIS again (NET START w3svc)
With IIS 6 (2003 Server), open up the IIS Manager, go to Web Service
Extensions, choose "Add a new Web service extension", enter in a name
such as PHP, choose the Add button and for the value browse to either
the ISAPI file (php4isapi.dll or php5isapi.dll) or CGI (php.exe or
php-cgi.exe) then check "Set extension status to Allowed" and click
OK.
In order to use index.php as a default content page, do the following:
From within the Documents tab, choose Add. Type in index.php and click
OK. Adjust the order by choosing Move Up or Move Down. This is similar
to setting DirectoryIndex with Apache.
The steps above must be repeated for each extension that is to be
associated with PHP scripts. .php is the most common although .php3
may be required for legacy applications.
If you experience 100% CPU usage after some time, turn off the IIS
setting Cache ISAPI Application.
_________________________________________________________________
Windows and PWS 4
PWS 4 does not support ISAPI, only PHP CGI should be used.
* Edit the enclosed pws-php4cgi.reg / pws-php5cgi.reg file (look
into the SAPI folder for PHP 4, or in the main folder for PHP 5)
to reflect the location of your php.exe / php-cgi.exe. Backslashes
should be escaped, for example:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\w3svc\parame
ters\Script Map] ".php"="C:\\php\\php.exe" (change to
C:\\php\\php-cgi.exe if you are using PHP 5) Now merge this
registery file into your system; you may do this by
double-clicking it.
* In the PWS Manager, right click on a given directory you want to
add PHP support to, and select Properties. Check the 'Execute'
checkbox, and confirm.
_________________________________________________________________
Windows and PWS/IIS 3
The recommended method for configuring these servers is to use the REG
file included with the distribution (pws-php4cgi.reg in the SAPI
folder for PHP 4, or pws-php5cgi.reg in the main folder for PHP 5).
You may want to edit this file and make sure the extensions and PHP
install directories match your configuration. Or you can follow the
steps below to do it manually.
Warning
These steps involve working directly with the Windows registry. One
error here can leave your system in an unstable state. We highly
recommend that you back up your registry first. The PHP Development
team will not be held responsible if you damage your registry.
* Run Regedit.
* Navigate to: HKEY_LOCAL_MACHINE /System /CurrentControlSet
/Services /W3Svc /Parameters /ScriptMap.
* On the edit menu select: New->String Value.
* Type in the extension you wish to use for your php scripts. For
example .php
* Double click on the new string value and enter the path to php.exe
in the value data field. ex: C:\php\php.exe for PHP 4, or
C:\php\php-cgi.exe for PHP 5.
* Repeat these steps for each extension you wish to associate with
PHP scripts.
The following steps do not affect the web server installation and only
apply if you want your PHP scripts to be executed when they are run
from the command line (ex. run C:\myscripts\test.php) or by double
clicking on them in a directory viewer window. You may wish to skip
these steps as you might prefer the PHP files to load into a text
editor when you double click on them.
* Navigate to: HKEY_CLASSES_ROOT
* On the edit menu select: New->Key.
* Name the key to the extension you setup in the previous section.
ex: .php
* Highlight the new key and in the right side pane, double click the
"default value" and enter phpfile.
* Repeat the last step for each extension you set up in the previous
section.
* Now create another New->Key under HKEY_CLASSES_ROOT and name it
phpfile.
* Highlight the new key phpfile and in the right side pane, double
click the "default value" and enter PHP Script.
* Right click on the phpfile key and select New->Key, name it Shell.
* Right click on the Shell key and select New->Key, name it open.
* Right click on the open key and select New->Key, name it command.
* Highlight the new key command and in the right side pane, double
click the "default value" and enter the path to php.exe. ex:
c:\php\php.exe -q %1. (don't forget the %1).
* Exit Regedit.
* If using PWS on Windows, reboot to reload the registry.
PWS and IIS 3 users now have a fully operational system. IIS 3 users
can use a nifty tool from Steven Genusa to configure their script
maps.
_________________________________________________________________
Apache 1.3.x on Microsoft Windows
This section contains notes and hints specific to Apache 1.3.x
installs of PHP on Microsoft Windows systems. There are also
instructions and notes for Apache 2 on a separate page.
Note: Please read the manual installation steps first!
There are two ways to set up PHP to work with Apache 1.3.x on Windows.
One is to use the CGI binary (php.exe for PHP 4 and php-cgi.exe for
PHP 5), the other is to use the Apache Module DLL. In either case you
need to edit your httpd.conf to configure Apache to work with PHP, and
then restart the server.
It is worth noting here that now the SAPI module has been made more
stable under Windows, we recommend it's use above the CGI binary,
since it is more transparent and secure.
Although there can be a few variations of configuring PHP under
Apache, these are simple enough to be used by the newcomer. Please
consult the Apache Documentation for further configuration directives.
After changing the configuration file, remember to restart the server,
for example, NET STOP APACHE followed by NET START APACHE, if you run
Apache as a Windows Service, or use your regular shortcuts.
Note: Remember that when adding path values in the Apache
configuration files on Windows, all backslashes such as
c:\directory\file.ext must be converted to forward slashes, as
c:/directory/file.ext.
_________________________________________________________________
Installing as an Apache module
You should add the following lines to your Apache httpd.conf file:
Example 2-3. PHP as an Apache 1.3.x module
This assumes PHP is installed to c:\php. Adjust the path if this is
not the case.
For PHP 4:
# Add to the end of the LoadModule section
LoadModule php4_module "c:/php/php4apache.dll"
# Add to the end of the AddModule section
AddModule mod_php4.c
For PHP 5:
# Add to the end of the LoadModule section
LoadModule php5_module "c:/php/php5apache.dll"
# Add to the end of the AddModule section
AddModule mod_php5.c
For both:
# Add this line inside the <IfModule mod_mime.c> conditional brace
AddType application/x-httpd-php .php
# For syntax highlighted .phps files, also add
AddType application/x-httpd-php-source .phps
_________________________________________________________________
Installing as a CGI binary
If you unzipped the PHP package to C:\php\ as described in the Manual
Installation Steps section, you need to insert these lines to your
Apache configuration file to set up the CGI binary:
Example 2-4. PHP and Apache 1.3.x as CGI
ScriptAlias /php/ "c:/php/"
AddType application/x-httpd-php .php
# For PHP 4
Action application/x-httpd-php "/php/php.exe"
# For PHP 5
Action application/x-httpd-php "/php/php-cgi.exe"
# specify the directory where php.ini is
SetEnv PHPRC C:/php
Note that the second line in the list above can be found in the actual
versions of httpd.conf, but it is commented out. Remember also to
substitute the c:/php/ for your actual path to PHP.
Warning
By using the CGI setup, your server is open to several possible
attacks. Please read our CGI security section to learn how to defend
yourself from those attacks.
If you would like to present PHP source files syntax highlighted,
there is no such convenient option as with the module version of PHP.
If you chose to configure Apache to use PHP as a CGI binary, you will
need to use the highlight_file() function. To do this simply create a
PHP script file and add this code: <?php
highlight_file('some_php_script.php'); ?>.
_________________________________________________________________
Apache 2.0.x on Microsoft Windows
This section contains notes and hints specific to Apache 2.0.x
installs of PHP on Microsoft Windows systems. We also have
instructions and notes for Apache 1.3.x users on a separate page.
Note: You should read the manual installation steps first!
Warning
We do not recommend using a threaded MPM in production with Apache2.
Use the prefork MPM instead, or use Apache1. For information on why,
read the following FAQ entry
You are highly encouraged to take a look at the Apache Documentation
to get a basic understanding of the Apache 2.0.x Server. Also consider
to read the Windows specific notes for Apache 2.0.x before reading on
here.
PHP and Apache 2.0.x compatibility notes: The following versions of
PHP are known to work with the most recent version of Apache 2.0.x:
* PHP 4.3.0 or later available at http://www.php.net/downloads.php.
* the latest stable development version. Get the source code
http://snaps.php.net/php4-latest.tar.gz or download binaries for
Windows http://snaps.php.net/win32/php4-win32-latest.zip.
* a prerelease version downloadable from http://qa.php.net/.
* you have always the option to obtain PHP through anonymous CVS.
These versions of PHP are compatible to Apache 2.0.40 and later.
Apache 2.0 SAPI-support started with PHP 4.2.0. PHP 4.2.3 works
with Apache 2.0.39, don't use any other version of Apache with PHP
4.2.3. However, the recommended setup is to use PHP 4.3.0 or later
with the most recent version of Apache2.
All mentioned versions of PHP will work still with Apache 1.3.x.
Warning
Apache 2.0.x is designed to run on Windows NT 4.0, Windows 2000 or
Windows XP. At this time, support for Windows 9x is incomplete. Apache
2.0.x is not expected to work on those platforms at this time.
Download the most recent version of Apache 2.0.x and a fitting PHP
version. Follow the Manual Installation Steps and come back to go on
with the integration of PHP and Apache.
There are two ways to set up PHP to work with Apache 2.0.x on Windows.
One is to use the CGI binary the other is to use the Apache module
DLL. In either case you need to edit your httpd.conf to configure
Apache to work with PHP and then restart the server.
Note: Remember that when adding path values in the Apache
configuration files on Windows, all backslashes such as
c:\directory\file.ext must be converted to forward slashes, as
c:/directory/file.ext.
_________________________________________________________________
Installing as a CGI binary
You need to insert these three lines to your Apache httpd.conf
configuration file to set up the CGI binary:
Example 2-5. PHP and Apache 2.0 as CGI
ScriptAlias /php/ "c:/php/"
AddType application/x-httpd-php .php
# For PHP 4
Action application/x-httpd-php "/php/php.exe"
# For PHP 5
Action application/x-httpd-php "/php/php-cgi.exe"
Warning
By using the CGI setup, your server is open to several possible
attacks. Please read our CGI security section to learn how to defend
yourself from those attacks.
_________________________________________________________________
Installing as an Apache module
You need to insert these two lines to your Apache httpd.conf
configuration file to set up the PHP module for Apache 2.0:
Example 2-6. PHP and Apache 2.0 as Module
# For PHP 4 do something like this:
LoadModule php4_module "c:/php/php4apache2.dll"
AddType application/x-httpd-php .php
# For PHP 5 do something like this:
LoadModule php5_module "c:/php/php5apache2.dll"
AddType application/x-httpd-php .php
# configure the path to php.ini
PHPIniDir "C:/php"
Note: Remember to substitute the c:/php/ for your actual path to
PHP in the above examples. Take care to use either php4apache2.dll
or php5apache2.dll in your LoadModule directive and not
php4apache.dll or php5apache.dll as the latter ones are designed to
run with Apache 1.3.x.
Note: If you want to use content negotiation, read related FAQ.
Warning
Don't mix up your installation with DLL files from different PHP
versions. You have the only choice to use the DLL's and extensions
that ship with your downloaded PHP version.
_________________________________________________________________
Sun, iPlanet and Netscape servers on Microsoft Windows
This section contains notes and hints specific to Sun Java System Web
Server, Sun ONE Web Server, iPlanet and Netscape server installs of
PHP on Windows.
From PHP 4.3.3 on you can use PHP scripts with the NSAPI module to
generate custom directory listings and error pages. Additional
functions for Apache compatibility are also available. For support in
current webservers read the note about subrequests.
_________________________________________________________________
CGI setup on Sun, iPlanet and Netscape servers
To install PHP as a CGI handler, do the following:
* Copy php4ts.dll to your systemroot (the directory where you
installed Windows)
* Make a file association from the command line. Type the following
two lines:
assoc .php=PHPScript
ftype PHPScript=c:\php\php.exe %1 %*
* In the Netscape Enterprise Administration Server create a dummy
shellcgi directory and remove it just after (this step creates 5
important lines in obj.conf and allow the web server to handle
shellcgi scripts).
* In the Netscape Enterprise Administration Server create a new mime
type (Category: type, Content-Type: magnus-internal/shellcgi, File
Suffix:php).
* Do it for each web server instance you want PHP to run
More details about setting up PHP as a CGI executable can be found
here: http://benoit.noss.free.fr/php/install-php.html
_________________________________________________________________
NSAPI setup on Sun, iPlanet and Netscape servers
To install PHP with NSAPI, do the following:
* Copy php4ts.dll to your systemroot (the directory where you
installed Windows)
* Make a file association from the command line. Type the following
two lines:
assoc .php=PHPScript
ftype PHPScript=c:\php\php.exe %1 %*
* In the Netscape Enterprise Administration Server create a new mime
type (Category: type, Content-Type: magnus-internal/x-httpd-php,
File Suffix: php).
* Edit magnus.conf (for servers >= 6) or obj.conf (for servers < 6)
and add the following: You should place the lines after mime types
init.
Init fn="load-modules" funcs="php4_init,php4_execute,php4_auth_trans" shlib="c:
/php/sapi/php4nsapi.dll"
Init fn="php4_init" LateInit="yes" errorString="Failed to initialise PHP!" [php
_ini="c:/path/to/php.ini"]
(PHP >= 4.3.3) The php_ini parameter is optional but with it you
can place your php.ini in your webserver config directory.
* Configure the default object in obj.conf (for virtual server
classes [Sun Web Server 6.0+] in their vserver.obj.conf): In the
<Object name="default"> section, place this line necessarily after
all 'ObjectType' and before all 'AddLog' lines:
Service fn="php4_execute" type="magnus-internal/x-httpd-php" [inikey=value inik
ey=value ...]
(PHP >= 4.3.3) As additional parameters you can add some special
php.ini-values, for example you can set a
docroot="/path/to/docroot" specific to the context php4_execute is
called. For boolean ini-keys please use 0/1 as value, not
"On","Off",... (this will not work correctly), e.g.
zlib.output_compression=1 instead of zlib.output_compression="On"
* This is only needed if you want to configure a directory that only
consists of PHP scripts (same like a cgi-bin directory):
<Object name="x-httpd-php">
ObjectType fn="force-type" type="magnus-internal/x-httpd-php"
Service fn=php4_execute [inikey=value inikey=value ...]
</Object>
After that you can configure a directory in the Administration
server and assign it the style x-httpd-php. All files in it will
get executed as PHP. This is nice to hide PHP usage by renaming
files to .html.
* Restart your web service and apply changes
* Do it for each web server instance you want PHP to run
Note: More details about setting up PHP as an NSAPI filter can be
found here: http://benoit.noss.free.fr/php/install-php4.html
Note: The stacksize that PHP uses depends on the configuration of
the webserver. If you get crashes with very large PHP scripts, it
is recommended to raise it with the Admin Server (in the section
"MAGNUS EDITOR").
_________________________________________________________________
CGI environment and recommended modifications in php.ini
Important when writing PHP scripts is the fact that Sun JSWS/Sun ONE
WS/iPlanet/Netscape is a multithreaded web server. Because of that all
requests are running in the same process space (the space of the
webserver itself) and this space has only one environment. If you want
to get CGI variables like PATH_INFO, HTTP_HOST etc. it is not the
correct way to try this in the old PHP 3.x way with getenv() or a
similar way (register globals to environment, $_ENV). You would only
get the environment of the running webserver without any valid CGI
variables!
Note: Why are there (invalid) CGI variables in the environment?
Answer: This is because you started the webserver process from the
admin server which runs the startup script of the webserver, you
wanted to start, as a CGI script (a CGI script inside of the admin
server!). This is why the environment of the started webserver has
some CGI environment variables in it. You can test this by starting
the webserver not from the administration server. Use the command
line as root user and start it manually - you will see there are no
CGI-like environment variables.
Simply change your scripts to get CGI variables in the correct way for
PHP 4.x by using the superglobal $_SERVER. If you have older scripts
which use $HTTP_HOST, etc., you should turn on register_globals in
php.ini and change the variable order too (important: remove "E" from
it, because you do not need the environment here):
variables_order = "GPCS"
register_globals = On
_________________________________________________________________
Special use for error pages or self-made directory listings (PHP >= 4.3.3)
You can use PHP to generate the error pages for "404 Not Found" or
similar. Add the following line to the object in obj.conf for every
error page you want to overwrite:
Error fn="php4_execute" code=XXX script="/path/to/script.php" [inikey=value ini
key=value...]
where XXX is the HTTP error code. Please delete any other Error
directives which could interfere with yours. If you want to place a
page for all errors that could exist, leave the code parameter out.
Your script can get the HTTP status code with $_SERVER['ERROR_TYPE'].
Another possibility is to generate self-made directory listings. Just
create a PHP script which displays a directory listing and replace the
corresponding default Service line for
type="magnus-internal/directory" in obj.conf with the following:
Service fn="php4_execute" type="magnus-internal/directory" script="/path/to/scr
ipt.php" [inikey=value inikey=value...]
For both error and directory listing pages the original URI and
translated URI are in the variables $_SERVER['PATH_INFO'] and
$_SERVER['PATH_TRANSLATED'].
_________________________________________________________________
Note about nsapi_virtual() and subrequests (PHP >= 4.3.3)
The NSAPI module now supports the nsapi_virtual() function (alias:
virtual()) to make subrequests on the webserver and insert the result
in the webpage. The problem is, that this function uses some
undocumented features from the NSAPI library.
Under Unix this is not a problem, because the module automatically
looks for the needed functions and uses them if available. If not,
nsapi_virtual() is disabled.
Under Windows limitations in the DLL handling need the use of a
automatic detection of the most recent ns-httpdXX.dll file. This is
tested for servers till version 6.1. If a newer version of the Sun
server is used, the detection fails and nsapi_virtual() is disabled.
If this is the case, try the following: Add the following parameter to
php4_init in magnus.conf/obj.conf:
Init fn=php4_init ... server_lib="ns-httpdXX.dll"
where XX is the correct DLL version number. To get it, look in the
server-root for the correct DLL name. The DLL with the biggest
filesize is the right one.
You can check the status by using the phpinfo() function.
Note: But be warned: Support for nsapi_virtual() is EXPERIMENTAL!!!
_________________________________________________________________
OmniHTTPd Server
This section contains notes and hints specific to OmniHTTPd on
Windows.
Note: You should read the manual installation steps first!
Warning
By using the CGI setup, your server is open to several possible
attacks. Please read our CGI security section to learn how to defend
yourself from those attacks.
You need to complete the following steps to make PHP work with
OmniHTTPd. This is a CGI executable setup. SAPI is supported by
OmniHTTPd, but some tests have shown that it is not so stable to use
PHP as an ISAPI module.
Important for CGI users: Read the faq on cgi.force_redirect for
important details. This directive needs to be set to 0.
1. Install OmniHTTPd server.
2. Right click on the blue OmniHTTPd icon in the system tray and
select Properties
3. Click on Web Server Global Settings
4. On the 'External' tab, enter: virtual = .php | actual =
c:\php\php.exe (use php-cgi.exe if installing PHP 5), and use the
Add button.
5. On the Mime tab, enter: virtual = wwwserver/stdcgi | actual =
.php, and use the Add button.
6. Click OK
Repeat steps 2 - 6 for each extension you want to associate with PHP.
Note: Some OmniHTTPd packages come with built in PHP support. You
can choose at setup time to do a custom setup, and uncheck the PHP
component. We recommend you to use the latest PHP binaries. Some
OmniHTTPd servers come with PHP 4 beta distributions, so you should
choose not to set up the built in support, but install your own. If
the server is already on your machine, use the Replace button in
Step 4 and 5 to set the new, correct information.
_________________________________________________________________
Sambar Server on Microsoft Windows
This section contains notes and hints specific to the Sambar Server
for Windows.
Note: You should read the manual installation steps first!
This list describes how to set up the ISAPI module to work with the
Sambar server on Windows.
* Find the file called mappings.ini (in the config directory) in the
Sambar install directory.
* Open mappings.ini and add the following line under [ISAPI]:
Example 2-7. ISAPI configuration of Sambar
#for PHP 4
*.php = c:\php\php4isapi.dll
#for PHP 5
*.php = c:\php\php5isapi.dll
(This line assumes that PHP was installed in c:\php.)
* Now restart the Sambar server for the changes to take effect.
_________________________________________________________________
Xitami on Microsoft Windows
This section contains notes and hints specific to Xitami on Windows.
Note: You should read the manual installation steps first!
This list describes how to set up the PHP CGI binary to work with
Xitami on Windows.
Important for CGI users: Read the faq on cgi.force_redirect for
important details. This directive needs to be set to 0. If you want
to use $_SERVER['PHP_SELF'] you have to enable the cgi.fix_pathinfo
directive.
Warning
By using the CGI setup, your server is open to several possible
attacks. Please read our CGI security section to learn how to defend
yourself from those attacks.
* Make sure the webserver is running, and point your browser to
xitamis admin console (usually http://127.0.0.1/admin), and click
on Configuration.
* Navigate to the Filters, and put the extension which PHP should
parse (i.e. .php) into the field File extensions (.xxx).
* In Filter command or script put the path and name of your PHP CGI
executable i.e. C:\php\php.exe for PHP 4, or C:\php\php-cgi.exe
for PHP 5.
* Press the 'Save' icon.
* Restart the server to reflect changes.
_________________________________________________________________
Installation of extensions on Windows
After installing PHP and a webserver on Windows, you will probably
want to install some extensions for added functionality. You can
choose which extensions you would like to load when PHP starts by
modifying your php.ini. You can also load a module dynamically in your
script using dl().
The DLLs for PHP extensions are prefixed with php_.
Note: In PHP 4.3.1 BCMath, Calendar, COM, Ctype, FTP, MySQL, ODBC,
Overload, PCRE, Session, Tokenizer, WDDX, XML and Zlib support is
built in. You don't need to load any additional extensions in order
to use these functions. See your distributions README.txt or
install.txt or this table for a list of built in modules.
The default location PHP searches for extensions is c:\php4\extensions
in PHP 4 and c:\php5 in PHP 5. To change this setting to reflect your
setup of PHP edit your php.ini file:
* You will need to change the extension_dir setting to point to the
directory where your extensions lives, or where you have placed
your php_*.dll files. Please do not forget the last backslash. For
example:
extension_dir = c:/php/extensions/
* Enable the extension(s) in php.ini you want to use by uncommenting
the extension=php_*.dll lines in php.ini. This is done by deleting
the leading ; from the extension you want to load.
Example 2-8. Enable Bzip2 extension for PHP-Windows
// change the following line from ...
;extension=php_bz2.dll
// ... to
extension=php_bz2.dll
* Some of the extensions need extra DLLs to work. Couple of them can
be found in the distribution package, in the C:\php\dlls\ folder
in PHP 4 or in the main folder in PHP 5, but some, for example
Oracle (php_oci8.dll) require DLLs which are not bundled with the
distribution package. If you are installing PHP 4, copy the
bundled DLLs from C:\php\dlls folder to the main C:\php folder.
Don't forget to include C:\php in the system PATH (this process is
explained in a separate FAQ entry).
* Some of these DLLs are not bundled with the PHP distribution. See
each extensions documentation page for details. Also, read the
manual section titled Installation of PECL extensions for details
on PECL. An increasingly large number of PHP extensions are found
in PECL, and these extensions require a separate download.
Note: If you are running a server module version of PHP remember to
restart your webserver to reflect your changes to php.ini.
The following table describes some of the extensions available and
required additional dlls.
Table 2-1. PHP Extensions
Extension Description Notes
php_bz2.dll bzip2 compression functions None
php_calendar.dll Calendar conversion functions Built in since PHP
4.0.3
php_cpdf.dll ClibPDF functions None
php_crack.dll Crack functions None
php_ctype.dll ctype family functions Built in since PHP 4.3.0
php_curl.dll CURL, Client URL library functions Requires:
libeay32.dll, ssleay32.dll (bundled)
php_cybercash.dll Cybercash payment functions PHP <= 4.2.0
php_db.dll DBM functions Deprecated. Use DBA instead (php_dba.dll)
php_dba.dll DBA: DataBase (dbm-style) Abstraction layer functions None
php_dbase.dll dBase functions None
php_dbx.dll dbx functions
php_domxml.dll DOM XML functions PHP <= 4.2.0 requires: libxml2.dll
(bundled) PHP >= 4.3.0 requires: iconv.dll (bundled)
php_dotnet.dll .NET functions PHP <= 4.1.1
php_exif.dll EXIF functions php_mbstring.dll. And, php_exif.dll must
be loaded after php_mbstring.dll in php.ini.
php_fbsql.dll FrontBase functions PHP <= 4.2.0
php_fdf.dll FDF: Forms Data Format functions. Requires: fdftk.dll
(bundled)
php_filepro.dll filePro functions Read-only access
php_ftp.dll FTP functions Built-in since PHP 4.0.3
php_gd.dll GD library image functions Removed in PHP 4.3.2. Also note
that truecolor functions are not available in GD1, instead, use
php_gd2.dll.
php_gd2.dll GD library image functions GD2
php_gettext.dll Gettext functions PHP <= 4.2.0 requires
gnu_gettext.dll (bundled), PHP >= 4.2.3 requires libintl-1.dll,
iconv.dll (bundled).
php_hyperwave.dll HyperWave functions None
php_iconv.dll ICONV characterset conversion Requires: iconv-1.3.dll
(bundled), PHP >=4.2.1 iconv.dll
php_ifx.dll Informix functions Requires: Informix libraries
php_iisfunc.dll IIS management functions None
php_imap.dll IMAP POP3 and NNTP functions None
php_ingres.dll Ingres II functions Requires: Ingres II libraries
php_interbase.dll InterBase functions Requires: gds32.dll (bundled)
php_java.dll Java functions PHP <= 4.0.6 requires: jvm.dll (bundled)
php_ldap.dll LDAP functions PHP <= 4.2.0 requires libsasl.dll
(bundled), PHP >= 4.3.0 requires libeay32.dll, ssleay32.dll (bundled)
php_mbstring.dll Multi-Byte String functions None
php_mcrypt.dll Mcrypt Encryption functions Requires: libmcrypt.dll
php_mhash.dll Mhash functions PHP >= 4.3.0 requires: libmhash.dll
(bundled)
php_mime_magic.dll Mimetype functions Requires: magic.mime (bundled)
php_ming.dll Ming functions for Flash None
php_msql.dll mSQL functions Requires: msql.dll (bundled)
php_mssql.dll MSSQL functions Requires: ntwdblib.dll (bundled)
php_mysql.dll MySQL functions PHP >= 5.0.0, requires libmysql.dll
(bundled)
php_mysqli.dll MySQLi functions PHP >= 5.0.0, requires libmysql.dll
(libmysqli.dll in PHP <= 5.0.2) (bundled)
php_oci8.dll Oracle 8 functions Requires: Oracle 8.1+ client libraries
php_openssl.dll OpenSSL functions Requires: libeay32.dll (bundled)
php_oracle.dll Oracle functions Requires: Oracle 7 client libraries
php_overload.dll Object overloading functions Built in since PHP 4.3.0
php_pdf.dll PDF functions None
php_pgsql.dll PostgreSQL functions None
php_printer.dll Printer functions None
php_shmop.dll Shared Memory functions None
php_snmp.dll SNMP get and walk functions NT only!
php_soap.dll SOAP functions PHP >= 5.0.0
php_sockets.dll Socket functions None
php_sybase_ct.dll Sybase functions Requires: Sybase client libraries
php_tidy.dll Tidy functions PHP >= 5.0.0
php_tokenizer.dll Tokenizer functions Built in since PHP 4.3.0
php_w32api.dll W32api functions None
php_xmlrpc.dll XML-RPC functions PHP >= 4.2.1 requires: iconv.dll
(bundled)
php_xslt.dll XSLT functions PHP <= 4.2.0 requires sablot.dll,
expat.dll (bundled). PHP >= 4.2.1 requires sablot.dll, expat.dll,
iconv.dll (bundled).
php_yaz.dll YAZ functions Requires: yaz.dll (bundled)
php_zip.dll Zip File functions Read only access
php_zlib.dll ZLib compression functions Built in since PHP 4.3.0
_________________________________________________________________
Chapter 3. Installation of PECL extensions
Introduction to PECL Installations
PHP extensions may be installed in a variety of ways. PECL is a
repository of PHP extensions living within the PEAR structure, and the
following demonstrates how to install these extensions.
These instructions assume /your/phpsrcdir/ is the path to the PHP
source, and extname is the name of the PECL extension. Adjust
accordingly. These instructions also assume a familiarity with the
pear command.
Shared extensions may be installed by including them inside of php.ini
using the extension PHP directive. See also the extensions_dir
directive, and dl(). The installation methods described below do not
automatically configure PHP to include these extensions, this step
must be done manually.
When building PHP modules, it's important to have the appropriate
versions of the required tools (autoconf, automake, libtool, etc.) See
the Anonymous CVS Instructions for details on the required tools, and
required versions.
_________________________________________________________________
Downloading PECL extensions
There are several options for downloading PECL extensions, such as:
* http://pecl.php.net
Listed here is information like the ChangeLog, release
information, requirements, revisions, etc. Although not every PECL
extension has a webpage, most do.
* pear download extname
The pear command may also be used to download source files.
Specific revisions may also be specified.
* CVS
All PECL files reside in CVS. A web-based view may be seen at
http://cvs.php.net/pecl/. To download straight from CVS, consider
the following where phpfi is the password for user cvsread:
$ cvs -d:pserver:cvsread@cvs.php.net:/repository login
$ cvs -d:pserver:cvsread@cvs.php.net:/repository co pecl/extname
* Windows downloads
Windows users may find compiled PECL binaries by downloading the
Collection of PECL modules from the PHP Downloads page, and by
retrieving a PECL Snapshot. To compile PHP under Windows, read the
Win32 Build README.
_________________________________________________________________
PECL for Windows users
Like with any other PHP extension DLL, to install move the PECL
extension DLLs into the extension_dir folder and include them within
php.ini. For example:
extension=php_extname.dll
After doing this, restart the web server.
_________________________________________________________________
Compiling shared PECL extensions with PEAR
PEAR makes it easy to create shared PHP extensions. Using the pear
command, do the following:
$ pear install extname
That will download the source for extname, and compile it on the
system. This results in an extname.so file that may then be included
in php.ini
In case the systems preferred_state is set higher than an available
extname version, like it's set to stable and the extension is still in
beta, either alter the preferred_state via pear config-set or specify
a specific version of the PECL extension. For example:
$ pear install extname-0.1.1
Regardless, pear will copy this extname.so into the extensions
directory. Adjust php.ini accordingly.
_________________________________________________________________
Compiling shared PECL extensions with phpize
If using pear is not an option, like for building shared PECL
extensions from CVS, or for unreleased PECL packages, then creating a
shared extension may also be done by manually using the phpize
command. The pear command essentially does this but it may also be
done manually. Assuming the source file is named extname.tgz, and that
it was downloaded into the current directory, consider the following:
$ pear download extname
$ gzip -d < extname.tgz | tar -xvf -
$ cd extname
$ phpize
$ ./configure && make
Upon success, this will create extname.so and put it into the modules/
and/or .libs/ directory within the extname/ source. Move this shared
extension (extname.so) into the PHP extensions directory, and adjust
php.ini accordingly.
_________________________________________________________________
Compiling PECL extensions statically into PHP
To statically include the extension within the PHP build, put the
extensions source into the ext/ directory found in the PHP source. For
example:
$ cd /your/phpsrcdir/ext
$ pear download extname
$ gzip -d < extname.tgz | tar -xvf -
$ mv extname-x.x.x extname
$ rm package.xml
This will result in the following directory:
/your/phpsrcdir/ext/extname
From here, build PHP as normal:
$ cd /your/phpsrcdir
$ ./buildconf
$ ./configure --help
$ ./configure --with-extname --enable-someotherext --with-foobar
$ make
$ make install
Whether --enable-extname or --with-extname is used depends on the
extension. Typically an extension that does not require external
libraries uses --enable. To be sure, run the following after
buildconf:
$ ./configure --help | grep extname
_________________________________________________________________
Chapter 4. Problems?
Read the FAQ
Some problems are more common than others. The most common ones are
listed in the PHP FAQ, part of this manual.
_________________________________________________________________
Other problems
If you are still stuck, someone on the PHP installation mailing list
may be able to help you. You should check out the archive first, in
case someone already answered someone else who had the same problem as
you. The archives are available from the support page on
http://www.php.net/support.php. To subscribe to the PHP installation
mailing list, send an empty mail to
php-install-subscribe@lists.php.net. The mailing list address is
php-install@lists.php.net.
If you want to get help on the mailing list, please try to be precise
and give the necessary details about your environment (which operating
system, what PHP version, what web server, if you are running PHP as
CGI or a server module, safe mode, etc...), and preferably enough code
to make others able to reproduce and test your problem.
_________________________________________________________________
Bug reports
If you think you have found a bug in PHP, please report it. The PHP
developers probably don't know about it, and unless you report it,
chances are it won't be fixed. You can report bugs using the
bug-tracking system at http://bugs.php.net/. Please do not send bug
reports in mailing list or personal letters. The bug system is also
suitable to submit feature requests.
Read the How to report a bug document before submitting any bug
reports!
_________________________________________________________________
Chapter 5. Runtime Configuration
The configuration file
The configuration file (called php3.ini in PHP 3, and simply php.ini
as of PHP 4) is read when PHP starts up. For the server module
versions of PHP, this happens only once when the web server is
started. For the CGI and CLI version, it happens on every invocation.
The default location of php.ini is a compile time option (see the FAQ
entry), but can be changed for the CGI and CLI version with the -c
command line switch, see the chapter about using PHP from the command
line. You can also use the environment variable PHPRC for an
additional path to search for a php.ini file.
If php-SAPI.ini exists (where SAPI is used SAPI, so the filename is
e.g. php-cli.ini or php-apache.ini), it's used instead of php.ini.
Note: The Apache web server changes the directory to root at
startup causing PHP to attempt to read php.ini from the root
filesystem if it exists.
The php.ini directives handled by extensions are documented
respectively on the pages of the extensions themselves. The list of
the core directives is available in the appendix. Probably not all the
PHP directives are documented in the manual though. For a completel
list of directives available in your PHP version, please read your
well commented php.ini file. Alternatively, you may find the the
latest php.ini from CVS helpful too.
Example 5-1. php.ini example
; any text on a line after an unquoted semicolon (;) is ignored
[php] ; section markers (text within square brackets) are also ignored
; Boolean values can be set to either:
; true, on, yes
; or false, off, no, none
register_globals = off
track_errors = yes
; you can enclose strings in double-quotes
include_path = ".:/usr/local/lib/php"
; backslashes are treated the same as any other character
include_path = ".;c:\php\lib"
_________________________________________________________________
How to change configuration settings
Running PHP as an Apache module
When using PHP as an Apache module, you can also change the
configuration settings using directives in Apache configuration files
(e.g. httpd.conf) and .htaccess files. You will need "AllowOverride
Options" or "AllowOverride All" privileges to do so.
With PHP 4 and PHP 5, there are several Apache directives that allow
you to change the PHP configuration from within the Apache
configuration files. For a listing of which directives are
PHP_INI_ALL, PHP_INI_PERDIR, or PHP_INI_SYSTEM, have a look at the
List of php.ini directives appendix.
Note: With PHP 3, there are Apache directives that correspond to
each configuration setting in the php3.ini name, except the name is
prefixed by "php3_".
php_value name value
Sets the value of the specified directive. Can be used only
with PHP_INI_ALL and PHP_INI_PERDIR type directives. To clear a
previously set value use none as the value.
Note: Don't use php_value to set boolean values. php_flag (see
below) should be used instead.
php_flag name on|off
Used to set a boolean configuration directive. Can be used only
with PHP_INI_ALL and PHP_INI_PERDIR type directives.
php_admin_value name value
Sets the value of the specified directive. This can not be used
in .htaccess files. Any directive type set with php_admin_value
can not be overridden by .htaccess or virtualhost directives.
To clear a previously set value use none as the value.
php_admin_flag name on|off
Used to set a boolean configuration directive. This can not be
used in .htaccess files. Any directive type set with
php_admin_flag can not be overridden by .htaccess or
virtualhost directives.
Example 5-2. Apache configuration example
<IfModule mod_php5.c>
php_value include_path ".:/usr/local/lib/php"
php_admin_flag safe_mode on
</IfModule>
<IfModule mod_php4.c>
php_value include_path ".:/usr/local/lib/php"
php_admin_flag safe_mode on
</IfModule>
<IfModule mod_php3.c>
php3_include_path ".:/usr/local/lib/php"
php3_safe_mode on
</IfModule>
Caution
PHP constants do not exist outside of PHP. For example, in httpd.conf
you can not use PHP constants such as E_ALL or E_NOTICE to set the
error_reporting directive as they will have no meaning and will
evaluate to 0. Use the associated bitmask values instead. These
constants can be used in php.ini
_________________________________________________________________
Changing PHP configuration via the Windows registry
When running PHP on Windows, the configuration values can be modified
on a per-directory basis using the Windows registry. The configuration
values are stored in the registry key HKLM\SOFTWARE\PHP\Per Directory
Values, in the sub-keys corresponding to the path names. For example,
configuration values for the directory c:\inetpub\wwwroot would be
stored in the key HKLM\SOFTWARE\PHP\Per Directory
Values\c\inetpub\wwwroot. The settings for the directory would be
active for any script running from this directory or any subdirectory
of it. The values under the key should have the name of the PHP
configuration directive and the string value. PHP constants in the
values are not parsed. However, only configuration values changeable
in PHP_INI_USER can be set this way, PHP_INI_PERDIR values can not.
_________________________________________________________________
Other interfaces to PHP
Regardless of how you run PHP, you can change certain values at
runtime of your scripts through ini_set(). See the documentation on
the ini_set() page for more information.
If you are interested in a complete list of configuration settings on
your system with their current values, you can execute the phpinfo()
function, and review the resulting page. You can also access the
values of individual configuration directives at runtime using
ini_get() or get_cfg_var().
Reference in New Issue View Git Blame Copy Permalink