php-src/README.TESTING

[IMPORTANT NOTICE]
------------------
 Do _not_ ask to developers why some or all tests are failed under
your environment! Let us know if you find why it fails. Thank you.


[Testing Basics] 
----------------
 To execute test scripts, you must build PHP with some SAPI, then you
type "make test" to execute all or some test scripts saved under
"tests" directory under source root directory.

Usage:
make test

 "make test" basically executes "run-tests.php" script
under the source root (parallel builds will not work). Therefore you
can execute the script as follows:

TEST_PHP_EXECUTABLE=sapi/cli/php \
sapi/cli/php [-c /path/to/php.ini] run-tests.php [ext/foo/tests/GLOB]


[Which "php" executable "make test" look for]
---------------------------------------------
 You must use TEST_PHP_EXECUTABLE environment variable to explicitly
select the php executable to be used to run the tests. That can either
be the CLI or CGI executable.

 "make test" executes "run-tests.php" script with "php" binary.  Some
test scripts such as session must be executed by CGI SAPI. Therefore,
you must build PHP with CGI SAPI to perform all tests.

NOTE: PHP binary executing "run-tests.php" and php binary used for
executing test scripts may differ. If you use different PHP binary for
executing "run-tests.php" script, you may get errors.


[Which php.ini is used]
-----------------------
 "make test" uses the same php.ini file as it would once installed.
The tests have been written to be independent of that php.ini file,
so if you find a test that is affected by a setting, please report
this, so we can address the issue.


[Which test scripts are executed]
---------------------------------
 "run-tests.php" ("make test"), without any arguments executes all
test scripts by extracting all directories named "tests"
from the source root and any subdirectories below. If there are files,
which have a "phpt" extension, "run-tests.php" looks at the sections
in these files, determines whether it should run it, by evaluating
the 'SKIP' section. If the test is eligible for execution, the 'FILE'
section is extracted into a ".php" file (with the same name besides 
the extension) and gets executed.
When an argument is given or TESTS environment variable is set, the
GLOB is expanded by the shell and any file with extension "*.phpt" is
regarded as a test file.

 Tester can easily execute tests selectively with as follows.

Examples:
./sapi/cli/php run-tests.php ext/mbstring/*
./sapi/cli/php run-tests.php ext/mbstring/020.phpt


[Test results]
--------------
 Test results are printed to standard output. If there is a failed test, 
the "run-tests.php" script saves the result, the expected result and the
code executed to the test script directory. For example, if 
ext/myext/tests/myext.phpt fails to pass, the following files are created:

ext/myext/tests/myext.php   - actual test file executed
ext/myext/tests/myext.log   - log of test execution (L)
ext/myext/tests/myext.exp   - expected output (E)
ext/myext/tests/myext.out   - output from test script (O)
ext/myext/tests/myext.diff  - diff of .out and .exp (D)

 Failed tests are always bugs. Either the test is bugged or not considering
factors applying to the tester's environment, or there is a bug in PHP.
If this is a known bug, we strive to provide bug numbers, in either the
test name or the file name. You can check the status of such a bug, by
going to: http://bugs.php.net/12345 where 12345 is the bug number.
For clarity and automated processing, bug numbers are prefixed by a hash
sign '#' in test names and/or test cases are named bug12345.phpt.

NOTE: The files generated by tests can be selected by setting the
environment variable TEST_PHP_LOG_FORMAT. For each file you want to be
generated use the character in brackets as shown above (default is LEOD).
The php file will be generated always.

NOTE: You can set environment variable TEST_PHP_DETAILED to enable
detailed test information.

[Automated testing]
 If you like to keep up to speed, with latest developments and quality
assurance, setting the environment variable NO_INTERACTION to 1, will not
prompt the tester for any user input.

Normally, the exit status of "make test" is zero, regardless of the results
of independent tests. Set the environment variable REPORT_EXIT_STATUS to 1,
and "make test" will set the exit status ("$?") to non-zero, when an
individual test has failed.

Example script to be run by cron(1):
========== qa-test.sh =============
#!/bin/sh

CO_DIR=$HOME/cvs/php4
MYMAIL=qa-test@domain.com
TMPDIR=/var/tmp
TODAY=`date +"%Y%m%d"`

# Make sure compilation enviroment is correct
CONFIGURE_OPTS='--disable-all --enable-cli --with-pcre'
export MAKE=gmake
export CC=gcc

# Set test environment
export NO_INTERACTIVITY=1
export REPORT_EXIT_STATUS=1

cd $CO_DIR
cvs update . >>$TMPDIR/phpqatest.$TODAY
./cvsclean ; ./buildconf ; ./configure $CONFIGURE_OPTS ; $MAKE
$MAKE test >>$TMPDIR/phpqatest.$TODAY 2>&1
if test $? -gt 0
then
        cat $TMPDIR/phpqatest.$TODAY | mail -s"PHP-QA Test Failed for $TODAY" $MYMAIL
fi
========== end of qa-test.sh =============

NOTE: the exit status of run-tests.php will be 1 when
REPORT_EXIT_STATUS is set. The result of "make test" may be higher
than that. At present, gmake 3.79.1 returns 2, so it is
advised to test for non-zero, rather then a specific value.


[Creating new test files]
-------------------------
 Writing test file is very easy if you are used to PHP. 

Here is an actual test file from standard module.

===== ext/standard/tests/strings/strtr.phpt =======
--TEST--
strtr() function
--FILE--
<?php
/* Do not change this test it is a REATME.TESTING example. */
$trans = array("hello"=>"hi", "hi"=>"hello", "a"=>"A", "world"=>"planet");
var_dump(strtr("# hi all, I said hello world! #", $trans));
?>
--EXPECT--
string(32) "# hello All, I sAid hi planet! #"
===== ext/standard/tests/strings/strtr.phpt =======

As you can see the file is devided into several sections. Below is a
list of all possible sections:

"--TEST--"        is title of the test (required).
"--SKIPIF--"      is condition when to skip this test (optional).
"--POST--"        is POST variable passed to test script (optional).
"--GET--"         is GET variable passed to test script (optional).
"--INI--"         each line contains an ini setting e.g. foo=bar (optional).
"--FILE--"        is the test script (required).
"--EXPECT--"      is the expected output from the test script (required).
"--EXPECTF--"     is an alternative of --EXPECT--. The difference is that
                  this form uses sscanf for output validation (alternative).
"--EXPECTREGEX--" is an alternative of --EXPECT--. This form allows the tester
                  to specify the result in a regular expression (alternative).

A test must at least contain the sections TEST, FILE and either EXPECT
or EXPECTF. When a test is called run-test.php takes the name from the
TEST section and writes the FILE section into a ".php" file with the 
same name as the ".phpt" file. This ".php" file will then be executed
and its output compared to the contents of the EXPECT section. It is a
good idea to generate output with var_dump() calls.

/ext/standard/tests/strings/str_shuffle.phpt is a good example for using 
EXPECTF instead of EXPECT. From time to time the algorithm used for shuffle 
changed and sometimes the machine used to execute the code has influence 
on the result of shuffle. But it always returns a three character string 
detectable by %s. Other scan-able forms are %i for integers, %d for numbers
only, %f for floating point values, %c for single characters and %x for 
hexadecimal values.

==== /ext/standard/tests/strings/str_shuffle.phpt ===
--TEST--
Testing str_shuffle.
--FILE--
<?php
/* Do not change this test it is a REATME.TESTING example. */
$s = '123';
var_dump(str_shuffle($s));
var_dump($s);
?>
--EXPECTF--
string(3) %s
string(3) "123"
==== end of /ext/standard/tests/strings/str_shuffle.phpt ===

/ext/standard/tests/strings/strings001.phpt is a good example for using 
EXPECTREGEX instead of EXPECT. This test also shows that in EXPECTREGEX 
some characters need to be escaped since otherwise they would be 
interpreted as a regular expression.

==== /ext/standard/tests/strings/strings001.phpt ===
--TEST--
Test whether strstr() and strrchr() are binary safe.
--FILE--
<?php
/* Do not change this test it is a REATME.TESTING example. */
$s = "alabala nica".chr(0)."turska panica";
var_dump(strstr($s, "nic"));
var_dump(strrchr($s," nic"));
?>
--EXPECTREGEX--
string\(18\) \"nica\x00turska panica\"
string\(19\) \" nica\x00turska panica\"
==== end of /ext/standard/tests/strings/strings001.phpt ===

Some tests depend on modules or functions available only in certain versions 
or they even require minimum version of php or zend. These tests should be 
skipped when the requirement cannot be fullfilled. To achieve this you can
use the SKIPIF section. To tell run-test.php that your test should be skipped
the SKIPIF section must print out the word "skip" followed by a reason why
the test should skip.

==== /ext/exif/tests/exif005.phpt ===
--TEST--
Check for exif_read_data, unusual IFD start
--SKIPIF--
<?php 
	if (!extension_loaded('exif')) print 'skip exif extension not available';
?>
--FILE--
<?php
/* Do not change this test it is a REATME.TESTING example.
 * test5.jpg is a 1*1 image that contains an Exif section with ifd = 00000009h
 */
$image  = exif_read_data('./ext/exif/tests/test5.jpg','',true,false);
var_dump($image['IFD0']);
?>
--EXPECT--
array(2) {
  ["ImageDescription"]=>
  string(11) "Ifd00000009"
  ["DateTime"]=>
  string(19) "2002:10:18 20:06:00"
}
==== end of /ext/exif/tests/exif005.phpt ===

Test script and SKIPIF code should be directly written into *.phpt. However, 
it is recommended to use include files when more test scripts depend on the 
same SKIPIF code or when certain test files need the same values for some 
input. But no file used by any test should have one of the following 
extensions: ".php", ".log", ".exp", ".out" or ".diff".

Tests should be named according to the following list:

Class:                       Name:                  Example:
Tests for bugs               bug<bugid>.phpt        bug17123.phpt
Tests for functions          <functionname>.phpt    dba_open.phpt
General tests for extensions <extname><no>.phpt     dba3.phpt

When you use an include file for the SKIPIF section it should be named
"skipif.inc" and an include file used in the FILE section of many tests
should be named "test.inc".

NOTE: All tests should run correctly with error_reporting(E_ALL) and
display_errors=1. This is the default when called from run-test.php.
If you have a good reason for lowering the error reporting, use --INI--
section and comment this in your testcode.

NOTE: If your test intentionally generates a PHP warning message use 
$php_errormsg variable, which you can then output. This will result 
in a consistent error message output across all platforms and PHP 
configurations, preventing your test from failing due inconsistencies 
in the error message content.

[How to help us]
----------------
 If you find bug in PHP, you can submit bug report AND test script 
for us. You don't have to write complete script, just give us test
script with following format. Please test the script and make sure
you write the correct ACTUAL OUTPUT and EXPECTED OUTPUT before you
submit.

<?php
/* 
Bug #12345
substr() bug. Do not return expected string.

ACTUAL OUTPUT
XYXA

EXPECTED OUTPUT
ABCD
*/

$str = "XYZABCD";
echo substr($str,3,7);

?>