mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-01 22:04:45 +08:00
1e4ee63cc8
This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de> |
||
---|---|---|
.. | ||
autoconf | ||
automake | ||
b43-tools | ||
bc | ||
bison | ||
ccache | ||
cmake | ||
coreutils | ||
dosfstools | ||
e2fsprogs | ||
elftosb | ||
expat | ||
findutils | ||
firmware-utils | ||
flex | ||
flock | ||
genext2fs | ||
gengetopt | ||
gmp | ||
include | ||
isl | ||
kernel2minor | ||
libelf | ||
libressl | ||
libtool | ||
lzma | ||
lzma-old | ||
m4 | ||
make-ext4fs | ||
missing-macros | ||
mkimage | ||
mklibs | ||
mm-macros | ||
mpc | ||
mpfr | ||
mtd-utils | ||
mtools | ||
padjffs2 | ||
patch | ||
patch-image | ||
patchelf | ||
pkg-config | ||
qemu | ||
quilt | ||
scons | ||
sdimage | ||
sed | ||
sparse | ||
squashfs | ||
squashfs4 | ||
sstrip | ||
tar | ||
upslug2 | ||
wrt350nv2-builder | ||
xz | ||
zlib | ||
Makefile |