kernel: modules: package Marvell gigE PHY driver

Some copper SFP modules come with Marvell's 88E1xxx PHY and need this
module to function. Package it, so users can easily install this PHY
driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP.

Without marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22
sfp sfp2: sfp_add_phy failed: -22

With marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode
mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL)
mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle 2022-11-15 18:45:52 +00:00
parent 9a2d362bf7
commit ebe2b7190b
No known key found for this signature in database
GPG Key ID: 5A8F39C31C3217CA

View File

@ -273,6 +273,40 @@ endef
$(eval $(call KernelPackage,phy-bcm84881))
define KernelPackage/phy-marvell
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Marvell Gigabit Ethernet PHY driver
KCONFIG:=CONFIG_MARVELL_PHY
DEPENDS:=+kmod-libphy
FILES:=$(LINUX_DIR)/drivers/net/phy/marvell.ko
AUTOLOAD:=$(call AutoLoad,18,marvell)
endef
define KernelPackage/phy-marvell/description
Supports Marvell Gigabit Ethernet PHYs:
* 88E1101
* 88E1112
* 88E1111 (incl. Finisar variant)
* 88E1118
* 88E1121R
* 88E1145
* 88E1149R
* 88E1240
* 88E1318S
* 88E1116R
* 88E1510
* 88E1540
* 88E1545
* 88E3016
* 88E6341 family
* 88E6390 family
* 88E6393 family
* 88E1340S
* 88E1548P
endef
$(eval $(call KernelPackage,phy-marvell))
define KernelPackage/phy-realtek
SUBMENU:=$(NETWORK_DEVICES_MENU)