mirrors/openwrt
0
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-11-27 20:04:24 +08:00
Code Issues Packages Projects Releases Wiki Activity

ar71xx: nuke 3.2 support

Browse Source 
SVN-Revision: 31360
This commit is contained in:
Gabor Juhos 2012-04-19 21:32:05 +00:00
parent 9854d6fb7f
commit da2cc2c79a
134 changed files with 0 additions and 12668 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

224
target/linux/ar71xx/config-3.2
View File

@ -1,224 +0,0 @@
CONFIG_AG71XX=y
CONFIG_AG71XX_AR8216_SUPPORT=y
# CONFIG_AG71XX_DEBUG is not set
# CONFIG_AG71XX_DEBUG_FS is not set
CONFIG_AR8216_PHY=y
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATH79=y
CONFIG_ATH79_DEV_AP9X_PCI=y
CONFIG_ATH79_DEV_DSA=y
CONFIG_ATH79_DEV_ETH=y
CONFIG_ATH79_DEV_GPIO_BUTTONS=y
CONFIG_ATH79_DEV_LEDS_GPIO=y
CONFIG_ATH79_DEV_M25P80=y
CONFIG_ATH79_DEV_SPI=y
CONFIG_ATH79_DEV_USB=y
CONFIG_ATH79_DEV_WMAC=y
CONFIG_ATH79_MACH_ALFA_AP96=y
CONFIG_ATH79_MACH_ALFA_NX=y
CONFIG_ATH79_MACH_ALL0258N=y
CONFIG_ATH79_MACH_AP113=y
CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_MZK_W04NU=y
CONFIG_ATH79_MACH_MZK_W300NH=y
CONFIG_ATH79_MACH_NBG460N=y
CONFIG_ATH79_MACH_OM2P=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y
CONFIG_ATH79_MACH_PB92=y
CONFIG_ATH79_MACH_RB4XX=y
CONFIG_ATH79_MACH_RB750=y
CONFIG_ATH79_MACH_RW2458N=y
CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TL_MR11U=y
CONFIG_ATH79_MACH_TL_MR3020=y
CONFIG_ATH79_MACH_TL_MR3X20=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y
CONFIG_ATH79_MACH_TL_WR741ND=y
CONFIG_ATH79_MACH_TL_WR741ND_V4=y
CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR941ND=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNR2000=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
CONFIG_ATH79_MACH_WZR_HP_G450H=y
CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
# CONFIG_ATH79_WDT is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_NXP_74HC153=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_SOURCE="../../root"
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_LANTIQ is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_RB750 is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_WNDR3700_USB is not set
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MICREL_PHY=y
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
CONFIG_MIPS=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MLX4_CORE is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MYLOADER_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_TPLINK_PARTS=y
CONFIG_MTD_WRT160NL_PARTS=y
CONFIG_MYLOADER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6063=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_AR724X=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_QUOTACTL is not set
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367_PHY=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_AR933X=y
CONFIG_SERIAL_AR933X_CONSOLE=y
CONFIG_SERIAL_AR933X_NR_UARTS=2
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_AR71XX=y
CONFIG_SOC_AR724X=y
CONFIG_SOC_AR913X=y
CONFIG_SOC_AR933X=y
CONFIG_SOC_AR934X=y
CONFIG_SPI=y
CONFIG_SPI_AP83=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_RB4XX is not set
# CONFIG_SPI_RB4XX_CPLD is not set
# CONFIG_SPI_VSC7385 is not set
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_XZ_DEC=y
CONFIG_ZONE_DMA_FLAG=0

32
target/linux/ar71xx/patches-3.2/001-MIPS-ath79-Change-number-of-available-IRQs.patch
View File

@ -1,32 +0,0 @@
From 781c5ae32a2e8aede2e1756dfbea1abb3cf09ffc Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 5 Jun 2011 23:38:44 +0200
Subject: [PATCH 01/27] MIPS: ath79: Change number of available IRQs
The status register of the miscellaneous interrupt controller is 32 bits
wide, but the actual value of NR_IRQS covers only 8 of them. Change
NR_IRQS in order to make all of those interrupt lines usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2441/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/mach-ath79/irq.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,10 +10,10 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 16
+#define NR_IRQS 40
#define ATH79_MISC_IRQ_BASE 8
-#define ATH79_MISC_IRQ_COUNT 8
+#define ATH79_MISC_IRQ_COUNT 32
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)

72
target/linux/ar71xx/patches-3.2/002-MIPS-ath79-Handle-more-MISC-IRQs.patch
View File

@ -1,72 +0,0 @@
From 9951cfc88b5d818391bebc7a56b678942b89721e Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 5 Jun 2011 23:38:45 +0200
Subject: [PATCH 02/27] MIPS: ath79: Handle more MISC IRQs
The AR724X SoCs have more IRQ sources hooked into the MISC IRQ controller.
The patch adds support for them.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2440/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/irq.c | 12 ++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++++
arch/mips/include/asm/mach-ath79/irq.h | 4 ++++
3 files changed, 20 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -46,6 +46,15 @@ static void ath79_misc_irq_handler(unsig
else if (pending & MISC_INT_TIMER)
generic_handle_irq(ATH79_MISC_IRQ_TIMER);
+ else if (pending & MISC_INT_TIMER2)
+ generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
+
+ else if (pending & MISC_INT_TIMER3)
+ generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
+
+ else if (pending & MISC_INT_TIMER4)
+ generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
+
else if (pending & MISC_INT_OHCI)
generic_handle_irq(ATH79_MISC_IRQ_OHCI);
@@ -58,6 +67,9 @@ static void ath79_misc_irq_handler(unsig
else if (pending & MISC_INT_WDOG)
generic_handle_irq(ATH79_MISC_IRQ_WDOG);
+ else if (pending & MISC_INT_ETHSW)
+ generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
+
else
spurious_interrupt();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -130,6 +130,10 @@
#define AR724X_RESET_REG_RESET_MODULE 0x1c
+#define MISC_INT_ETHSW BIT(12)
+#define MISC_INT_TIMER4 BIT(10)
+#define MISC_INT_TIMER3 BIT(9)
+#define MISC_INT_TIMER2 BIT(8)
#define MISC_INT_DMA BIT(7)
#define MISC_INT_OHCI BIT(6)
#define MISC_INT_PERFC BIT(5)
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -30,6 +30,10 @@
#define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5)
#define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6)
#define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7)
+#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8)
+#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9)
+#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10)
+#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12)
#include_next <irq.h>

375
target/linux/ar71xx/patches-3.2/003-MIPS-ath79-add-common-USB-Host-Controller-device.patch
View File

@ -1,375 +0,0 @@
From cb888b2552199ace429731b772d5257c598d53df Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 5 Jun 2011 23:38:46 +0200
Subject: [PATCH 03/27] MIPS: ath79: add common USB Host Controller device
Add common platform_device and helper code to make the registration of
the built-in USB controllers easier on the board which are using them.
Also register the USB controller on the AP81 and PB44 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2442/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 5 +
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/dev-usb.c | 178 ++++++++++++++++++++++++
arch/mips/ath79/dev-usb.h | 17 +++
arch/mips/ath79/mach-ap81.c | 2 +
arch/mips/ath79/mach-pb44.c | 2 +
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 ++++-
7 files changed, 236 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/ath79/dev-usb.c
create mode 100644 arch/mips/ath79/dev-usb.h
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -9,6 +9,7 @@ config ATH79_MACH_AP81
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
+ select ATH79_DEV_USB
help
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
@@ -19,6 +20,7 @@ config ATH79_MACH_PB44
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
+ select ATH79_DEV_USB
help
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@@ -52,4 +54,7 @@ config ATH79_DEV_LEDS_GPIO
config ATH79_DEV_SPI
def_bool n
+config ATH79_DEV_USB
+ def_bool n
+
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += d
obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
#
# Machines
--- /dev/null
+++ b/arch/mips/ath79/dev-usb.c
@@ -0,0 +1,178 @@
+/*
+ * Atheros AR7XXX/AR9XXX USB Host Controller device
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-usb.h"
+
+static struct resource ath79_ohci_resources[] = {
+ [0] = {
+ /* .start and .end fields are filled dynamically */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ATH79_MISC_IRQ_OHCI,
+ .end = ATH79_MISC_IRQ_OHCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device ath79_ohci_device = {
+ .name = "ath79-ohci",
+ .id = -1,
+ .resource = ath79_ohci_resources,
+ .num_resources = ARRAY_SIZE(ath79_ohci_resources),
+ .dev = {
+ .dma_mask = &ath79_ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource ath79_ehci_resources[] = {
+ [0] = {
+ /* .start and .end fields are filled dynamically */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ATH79_CPU_IRQ_USB,
+ .end = ATH79_CPU_IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device ath79_ehci_device = {
+ .name = "ath79-ehci",
+ .id = -1,
+ .resource = ath79_ehci_resources,
+ .num_resources = ARRAY_SIZE(ath79_ehci_resources),
+ .dev = {
+ .dma_mask = &ath79_ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
+ AR71XX_RESET_USB_PHY | \
+ AR71XX_RESET_USB_OHCI_DLL)
+
+static void __init ath79_usb_setup(void)
+{
+ void __iomem *usb_ctrl_base;
+
+ ath79_device_reset_set(AR71XX_USB_RESET_MASK);
+ mdelay(1000);
+ ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
+
+ usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
+
+ /* Turning on the Buff and Desc swap bits */
+ __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
+
+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */
+ __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+
+ iounmap(usb_ctrl_base);
+
+ mdelay(900);
+
+ ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
+ ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
+ platform_device_register(&ath79_ohci_device);
+
+ ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
+ ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
+ ath79_ehci_device.name = "ar71xx-ehci";
+ platform_device_register(&ath79_ehci_device);
+}
+
+static void __init ar7240_usb_setup(void)
+{
+ void __iomem *usb_ctrl_base;
+
+ ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
+ ath79_device_reset_set(AR7240_RESET_USB_HOST);
+
+ mdelay(1000);
+
+ ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
+ ath79_device_reset_clear(AR7240_RESET_USB_HOST);
+
+ usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
+
+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */
+ __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+
+ iounmap(usb_ctrl_base);
+
+ ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
+ ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+ platform_device_register(&ath79_ohci_device);
+}
+
+static void __init ar724x_usb_setup(void)
+{
+ ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR724X_RESET_USB_HOST);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR724X_RESET_USB_PHY);
+ mdelay(10);
+
+ ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
+ ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
+ ath79_ehci_device.name = "ar724x-ehci";
+ platform_device_register(&ath79_ehci_device);
+}
+
+static void __init ar913x_usb_setup(void)
+{
+ ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR913X_RESET_USB_HOST);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+ mdelay(10);
+
+ ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
+ ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
+ ath79_ehci_device.name = "ar913x-ehci";
+ platform_device_register(&ath79_ehci_device);
+}
+
+void __init ath79_register_usb(void)
+{
+ if (soc_is_ar71xx())
+ ath79_usb_setup();
+ else if (soc_is_ar7240())
+ ar7240_usb_setup();
+ else if (soc_is_ar7241() || soc_is_ar7242())
+ ar724x_usb_setup();
+ else if (soc_is_ar913x())
+ ar913x_usb_setup();
+ else
+ BUG();
+}
--- /dev/null
+++ b/arch/mips/ath79/dev-usb.h
@@ -0,0 +1,17 @@
+/*
+ * Atheros AR71XX/AR724X/AR913X USB Host Controller support
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_USB_H
+#define _ATH79_DEV_USB_H
+
+void ath79_register_usb(void);
+
+#endif /* _ATH79_DEV_USB_H */
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -14,6 +14,7 @@
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
+#include "dev-usb.h"
#define AP81_GPIO_LED_STATUS 1
#define AP81_GPIO_LED_AOSS 3
@@ -92,6 +93,7 @@ static void __init ap81_setup(void)
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
ath79_register_ar913x_wmac(cal_data);
+ ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -18,6 +18,7 @@
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
+#include "dev-usb.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
@@ -112,6 +113,7 @@ static void __init pb44_init(void)
pb44_gpio_keys);
ath79_register_spi(&pb44_spi_data, pb44_spi_info,
ARRAY_SIZE(pb44_spi_info));
+ ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -20,6 +20,10 @@
#include <linux/bitops.h>
#define AR71XX_APB_BASE 0x18000000
+#define AR71XX_EHCI_BASE 0x1b000000
+#define AR71XX_EHCI_SIZE 0x1000
+#define AR71XX_OHCI_BASE 0x1c000000
+#define AR71XX_OHCI_SIZE 0x1000
#define AR71XX_SPI_BASE 0x1f000000
#define AR71XX_SPI_SIZE 0x01000000
@@ -27,6 +31,8 @@
#define AR71XX_DDR_CTRL_SIZE 0x100
#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR71XX_UART_SIZE 0x100
+#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
+#define AR71XX_USB_CTRL_SIZE 0x100
#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
#define AR71XX_GPIO_SIZE 0x100
#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
@@ -34,6 +40,16 @@
#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
#define AR71XX_RESET_SIZE 0x100
+#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
+#define AR7240_USB_CTRL_SIZE 0x100
+#define AR7240_OHCI_BASE 0x1b000000
+#define AR7240_OHCI_SIZE 0x1000
+
+#define AR724X_EHCI_BASE 0x1b000000
+#define AR724X_EHCI_SIZE 0x1000
+
+#define AR913X_EHCI_BASE 0x1b000000
+#define AR913X_EHCI_SIZE 0x1000
#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
#define AR913X_WMAC_SIZE 0x30000
@@ -105,6 +121,12 @@
#define AR913X_AHB_DIV_MASK 0x1
/*
+ * USB_CONFIG block
+ */
+#define AR71XX_USB_CTRL_REG_FLADJ 0x00
+#define AR71XX_USB_CTRL_REG_CONFIG 0x04
+
+/*
* RESET block
*/
#define AR71XX_RESET_REG_TIMER 0x00
@@ -162,14 +184,22 @@
#define AR71XX_RESET_PCI_BUS BIT(1)
#define AR71XX_RESET_PCI_CORE BIT(0)
+#define AR7240_RESET_USB_HOST BIT(5)
+#define AR7240_RESET_OHCI_DLL BIT(3)
+
#define AR724X_RESET_GE1_MDIO BIT(23)
#define AR724X_RESET_GE0_MDIO BIT(22)
#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10)
#define AR724X_RESET_PCIE_PHY BIT(7)
#define AR724X_RESET_PCIE BIT(6)
-#define AR724X_RESET_OHCI_DLL BIT(3)
+#define AR724X_RESET_USB_HOST BIT(5)
+#define AR724X_RESET_USB_PHY BIT(4)
+#define AR724X_RESET_USBSUS_OVERRIDE BIT(3)
#define AR913X_RESET_AMBA2WMAC BIT(22)
+#define AR913X_RESET_USBSUS_OVERRIDE BIT(10)
+#define AR913X_RESET_USB_HOST BIT(5)
+#define AR913X_RESET_USB_PHY BIT(4)
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0

40
target/linux/ar71xx/patches-3.2/004-MIPS-ath79-Remove-superfluous-parentheses.patch
View File

@ -1,40 +0,0 @@
From 44f70a7cd3c0a8481877174a0f12b013c5667933 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:01 +0200
Subject: [PATCH 04/27] MIPS: ath79: Remove superfluous parentheses
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2519/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/setup.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -101,19 +101,19 @@ static void __init ath79_detect_sys_type
case REV_ID_MAJOR_AR7240:
ath79_soc = ATH79_SOC_AR7240;
chip = "7240";
- rev = (id & AR724X_REV_ID_REVISION_MASK);
+ rev = id & AR724X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR7241:
ath79_soc = ATH79_SOC_AR7241;
chip = "7241";
- rev = (id & AR724X_REV_ID_REVISION_MASK);
+ rev = id & AR724X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR7242:
ath79_soc = ATH79_SOC_AR7242;
chip = "7242";
- rev = (id & AR724X_REV_ID_REVISION_MASK);
+ rev = id & AR724X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR913X:

71
target/linux/ar71xx/patches-3.2/005-MIPS-ath79-add-revision-id-for-the-AR933X-SoCs.patch
View File

@ -1,71 +0,0 @@
From a6b04a056cd63e9241b94bc5dcc8847fa4cb1d34 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 23 Jun 2011 18:13:14 +0200
Subject: [PATCH 05/27] MIPS: ath79: add revision id for the AR933X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2538/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/setup.c | 12 ++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++++
arch/mips/include/asm/mach-ath79/ath79.h | 4 +++-
3 files changed, 19 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -116,6 +116,18 @@ static void __init ath79_detect_sys_type
rev = id & AR724X_REV_ID_REVISION_MASK;
break;
+ case REV_ID_MAJOR_AR9330:
+ ath79_soc = ATH79_SOC_AR9330;
+ chip = "9330";
+ rev = id & AR933X_REV_ID_REVISION_MASK;
+ break;
+
+ case REV_ID_MAJOR_AR9331:
+ ath79_soc = ATH79_SOC_AR9331;
+ chip = "9331";
+ rev = id & AR933X_REV_ID_REVISION_MASK;
+ break;
+
case REV_ID_MAJOR_AR913X:
minor = id & AR913X_REV_ID_MINOR_MASK;
rev = id >> AR913X_REV_ID_REVISION_SHIFT;
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -207,6 +207,8 @@
#define REV_ID_MAJOR_AR7240 0x00c0
#define REV_ID_MAJOR_AR7241 0x0100
#define REV_ID_MAJOR_AR7242 0x1100
+#define REV_ID_MAJOR_AR9330 0x0110
+#define REV_ID_MAJOR_AR9331 0x1110
#define AR71XX_REV_ID_MINOR_MASK 0x3
#define AR71XX_REV_ID_MINOR_AR7130 0x0
@@ -221,6 +223,8 @@
#define AR913X_REV_ID_REVISION_MASK 0x3
#define AR913X_REV_ID_REVISION_SHIFT 2
+#define AR933X_REV_ID_REVISION_MASK 0x3
+
#define AR724X_REV_ID_REVISION_MASK 0x3
/*
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -26,7 +26,9 @@ enum ath79_soc_type {
ATH79_SOC_AR7241,
ATH79_SOC_AR7242,
ATH79_SOC_AR9130,
- ATH79_SOC_AR9132
+ ATH79_SOC_AR9132,
+ ATH79_SOC_AR9330,
+ ATH79_SOC_AR9331,
};
extern enum ath79_soc_type ath79_soc;

208
target/linux/ar71xx/patches-3.2/006-MIPS-ath79-Add-early-printk-support-for-the-AR933X-S.patch
View File

@ -1,208 +0,0 @@
From 84ead7964e423c37a73da30a1a2c4c486f74242d Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:03 +0200
Subject: [PATCH 06/27] MIPS: ath79: Add early printk support for the AR933X SoCs
The AR933X SoCs are using a different UART, thus require
different code for early printk support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2521/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/early_printk.c | 76 +++++++++++++++++++++---
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 +
arch/mips/include/asm/mach-ath79/ar933x_uart.h | 67 +++++++++++++++++++++
3 files changed, 137 insertions(+), 9 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ath79/ar933x_uart.h
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -1,7 +1,7 @@
/*
- * Atheros AR71XX/AR724X/AR913X SoC early printk support
+ * Atheros AR7XXX/AR9XXX SoC early printk support
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -10,27 +10,85 @@
*/
#include <linux/io.h>
+#include <linux/errno.h>
#include <linux/serial_reg.h>
#include <asm/addrspace.h>
+#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ar933x_uart.h>
-static inline void prom_wait_thre(void __iomem *base)
+static void (*_prom_putchar) (unsigned char);
+
+static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
{
- u32 lsr;
+ u32 t;
do {
- lsr = __raw_readl(base + UART_LSR * 4);
- if (lsr & UART_LSR_THRE)
+ t = __raw_readl(reg);
+ if ((t & mask) == val)
break;
} while (1);
}
-void prom_putchar(unsigned char ch)
+static void prom_putchar_ar71xx(unsigned char ch)
{
void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
- prom_wait_thre(base);
+ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
__raw_writel(ch, base + UART_TX * 4);
- prom_wait_thre(base);
+ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
+}
+
+static void prom_putchar_ar933x(unsigned char ch)
+{
+ void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE));
+
+ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
+ AR933X_UART_DATA_TX_CSR);
+ __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG);
+ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
+ AR933X_UART_DATA_TX_CSR);
+}
+
+static void prom_putchar_dummy(unsigned char ch)
+{
+ /* nothing to do */
+}
+
+static void prom_putchar_init(void)
+{
+ void __iomem *base;
+ u32 id;
+
+ base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE));
+ id = __raw_readl(base + AR71XX_RESET_REG_REV_ID);
+ id &= REV_ID_MAJOR_MASK;
+
+ switch (id) {
+ case REV_ID_MAJOR_AR71XX:
+ case REV_ID_MAJOR_AR7240:
+ case REV_ID_MAJOR_AR7241:
+ case REV_ID_MAJOR_AR7242:
+ case REV_ID_MAJOR_AR913X:
+ _prom_putchar = prom_putchar_ar71xx;
+ break;
+
+ case REV_ID_MAJOR_AR9330:
+ case REV_ID_MAJOR_AR9331:
+ _prom_putchar = prom_putchar_ar933x;
+ break;
+
+ default:
+ _prom_putchar = prom_putchar_dummy;
+ break;
+ }
+}
+
+void prom_putchar(unsigned char ch)
+{
+ if (!_prom_putchar)
+ prom_putchar_init();
+
+ _prom_putchar(ch);
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -53,6 +53,9 @@
#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
#define AR913X_WMAC_SIZE 0x30000
+#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
+#define AR933X_UART_SIZE 0x14
+
/*
* DDR_CTRL block
*/
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
@@ -0,0 +1,67 @@
+/*
+ * Atheros AR933X UART defines
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __AR933X_UART_H
+#define __AR933X_UART_H
+
+#define AR933X_UART_REGS_SIZE 20
+#define AR933X_UART_FIFO_SIZE 16
+
+#define AR933X_UART_DATA_REG 0x00
+#define AR933X_UART_CS_REG 0x04
+#define AR933X_UART_CLOCK_REG 0x08
+#define AR933X_UART_INT_REG 0x0c
+#define AR933X_UART_INT_EN_REG 0x10
+
+#define AR933X_UART_DATA_TX_RX_MASK 0xff
+#define AR933X_UART_DATA_RX_CSR BIT(8)
+#define AR933X_UART_DATA_TX_CSR BIT(9)
+
+#define AR933X_UART_CS_PARITY_S 0
+#define AR933X_UART_CS_PARITY_M 0x3
+#define AR933X_UART_CS_PARITY_NONE 0
+#define AR933X_UART_CS_PARITY_ODD 1
+#define AR933X_UART_CS_PARITY_EVEN 2
+#define AR933X_UART_CS_IF_MODE_S 2
+#define AR933X_UART_CS_IF_MODE_M 0x3
+#define AR933X_UART_CS_IF_MODE_NONE 0
+#define AR933X_UART_CS_IF_MODE_DTE 1
+#define AR933X_UART_CS_IF_MODE_DCE 2
+#define AR933X_UART_CS_FLOW_CTRL_S 4
+#define AR933X_UART_CS_FLOW_CTRL_M 0x3
+#define AR933X_UART_CS_DMA_EN BIT(6)
+#define AR933X_UART_CS_TX_READY_ORIDE BIT(7)
+#define AR933X_UART_CS_RX_READY_ORIDE BIT(8)
+#define AR933X_UART_CS_TX_READY BIT(9)
+#define AR933X_UART_CS_RX_BREAK BIT(10)
+#define AR933X_UART_CS_TX_BREAK BIT(11)
+#define AR933X_UART_CS_HOST_INT BIT(12)
+#define AR933X_UART_CS_HOST_INT_EN BIT(13)
+#define AR933X_UART_CS_TX_BUSY BIT(14)
+#define AR933X_UART_CS_RX_BUSY BIT(15)
+
+#define AR933X_UART_CLOCK_STEP_M 0xffff
+#define AR933X_UART_CLOCK_SCALE_M 0xfff
+#define AR933X_UART_CLOCK_SCALE_S 16
+#define AR933X_UART_CLOCK_STEP_M 0xffff
+
+#define AR933X_UART_INT_RX_VALID BIT(0)
+#define AR933X_UART_INT_TX_READY BIT(1)
+#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2)
+#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3)
+#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4)
+#define AR933X_UART_INT_RX_PARITY_ERR BIT(5)
+#define AR933X_UART_INT_RX_BREAK_ON BIT(6)
+#define AR933X_UART_INT_RX_BREAK_OFF BIT(7)
+#define AR933X_UART_INT_RX_FULL BIT(8)
+#define AR933X_UART_INT_TX_EMPTY BIT(9)
+#define AR933X_UART_INT_ALLINTS 0x3ff
+
+#endif /* __AR933X_UART_H */

148
target/linux/ar71xx/patches-3.2/007-MIPS-ath79-add-AR933X-specific-clock-init.patch
View File

@ -1,148 +0,0 @@
From 29c8b2eef2011bf9392479487a51f6927892bfd6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:04 +0200
Subject: [PATCH 07/27] MIPS: ath79: add AR933X specific clock init
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2522/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/clock.c | 55 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 22 +++++++++
arch/mips/include/asm/mach-ath79/ath79.h | 6 +++
3 files changed, 83 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -110,6 +110,59 @@ static void __init ar913x_clocks_init(vo
ath79_uart_clk.rate = ath79_ahb_clk.rate;
}
+static void __init ar933x_clocks_init(void)
+{
+ u32 clock_ctrl;
+ u32 cpu_config;
+ u32 freq;
+ u32 t;
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+ ath79_ref_clk.rate = (40 * 1000 * 1000);
+ else
+ ath79_ref_clk.rate = (25 * 1000 * 1000);
+
+ clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
+ if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
+ } else {
+ cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
+
+ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
+ freq = ath79_ref_clk.rate / t;
+
+ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR933X_PLL_CPU_CONFIG_NINT_MASK;
+ freq *= t;
+
+ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ if (t == 0)
+ t = 1;
+
+ freq >>= t;
+
+ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+ AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
+ ath79_cpu_clk.rate = freq / t;
+
+ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+ AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
+ ath79_ddr_clk.rate = freq / t;
+
+ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+ AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
+ ath79_ahb_clk.rate = freq / t;
+ }
+
+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
+ ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
void __init ath79_clocks_init(void)
{
if (soc_is_ar71xx())
@@ -118,6 +171,8 @@ void __init ath79_clocks_init(void)
ar724x_clocks_init();
else if (soc_is_ar913x())
ar913x_clocks_init();
+ else if (soc_is_ar933x())
+ ar933x_clocks_init();
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -123,6 +123,24 @@
#define AR913X_AHB_DIV_SHIFT 19
#define AR913X_AHB_DIV_MASK 0x1
+#define AR933X_PLL_CPU_CONFIG_REG 0x00
+#define AR933X_PLL_CLOCK_CTRL_REG 0x08
+
+#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10
+#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f
+#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16
+#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
+#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23
+#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
+
+#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2)
+#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5
+#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3
+#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10
+#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3
+#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
+#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
+
/*
* USB_CONFIG block
*/
@@ -155,6 +173,8 @@
#define AR724X_RESET_REG_RESET_MODULE 0x1c
+#define AR933X_RESET_REG_BOOTSTRAP 0xac
+
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
#define MISC_INT_TIMER3 BIT(9)
@@ -204,6 +224,8 @@
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
+#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -68,6 +68,12 @@ static inline int soc_is_ar913x(void)
ath79_soc == ATH79_SOC_AR9132);
}
+static inline int soc_is_ar933x(void)
+{
+ return (ath79_soc == ATH79_SOC_AR9330 ||
+ ath79_soc == ATH79_SOC_AR9331);
+}
+
extern void __iomem *ath79_ddr_base;
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;

46
target/linux/ar71xx/patches-3.2/008-MIPS-ath79-Add-AR933X-specific-glue-for-ath79_device.patch
View File

@ -1,46 +0,0 @@
From 00624e5d91c0e76f38730633eff51fc7630dd27b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:05 +0200
Subject: [PATCH 08/27] MIPS: ath79: Add AR933X specific glue for ath79_device_reset_{set,clear}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2523/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/common.c | 4 ++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 5 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -64,6 +64,8 @@ void ath79_device_reset_set(u32 mask)
reg = AR724X_RESET_REG_RESET_MODULE;
else if (soc_is_ar913x())
reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
else
BUG();
@@ -86,6 +88,8 @@ void ath79_device_reset_clear(u32 mask)
reg = AR724X_RESET_REG_RESET_MODULE;
else if (soc_is_ar913x())
reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -173,6 +173,7 @@
#define AR724X_RESET_REG_RESET_MODULE 0x1c
+#define AR933X_RESET_REG_RESET_MODULE 0x1c
#define AR933X_RESET_REG_BOOTSTRAP 0xac
#define MISC_INT_ETHSW BIT(12)

51
target/linux/ar71xx/patches-3.2/009-MIPS-ath79-Add-AR933X-specific-IRQ-initialization.patch
View File

@ -1,51 +0,0 @@
From f2963f6a811da75e2531fd1312aa124cd73f15d5 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:06 +0200
Subject: [PATCH 09/27] MIPS: ath79: Add AR933X specific IRQ initialization
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/irq.c | 5 ++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 5 +++++
2 files changed, 9 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -129,7 +129,7 @@ static void __init ath79_misc_irq_init(v
if (soc_is_ar71xx() || soc_is_ar913x())
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
- else if (soc_is_ar724x())
+ else if (soc_is_ar724x() || soc_is_ar933x())
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
else
BUG();
@@ -186,6 +186,9 @@ void __init arch_init_irq(void)
} else if (soc_is_ar913x()) {
ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
+ } else if (soc_is_ar933x()) {
+ ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
+ ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
} else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -82,6 +82,11 @@
#define AR913X_DDR_REG_FLUSH_USB 0x84
#define AR913X_DDR_REG_FLUSH_WMAC 0x88
+#define AR933X_DDR_REG_FLUSH_GE0 0x7c
+#define AR933X_DDR_REG_FLUSH_GE1 0x80
+#define AR933X_DDR_REG_FLUSH_USB 0x84
+#define AR933X_DDR_REG_FLUSH_WMAC 0x88
+
/*
* PLL block
*/

36
target/linux/ar71xx/patches-3.2/010-MIPS-ath79-add-AR933X-specific-GPIO-initialization.patch
View File

@ -1,36 +0,0 @@
From e39670cd076caecfa75f5d97803a275dbd1ec4ab Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:07 +0200
Subject: [PATCH 10/27] MIPS: ath79: add AR933X specific GPIO initialization
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2524/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/gpio.c | 2 ++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 3 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -153,6 +153,8 @@ void __init ath79_gpio_init(void)
ath79_gpio_count = AR724X_GPIO_COUNT;
else if (soc_is_ar913x())
ath79_gpio_count = AR913X_GPIO_COUNT;
+ else if (soc_is_ar933x())
+ ath79_gpio_count = AR933X_GPIO_COUNT;
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -298,5 +298,6 @@
#define AR71XX_GPIO_COUNT 16
#define AR724X_GPIO_COUNT 18
#define AR913X_GPIO_COUNT 22
+#define AR933X_GPIO_COUNT 30
#endif /* __ASM_MACH_AR71XX_REGS_H */

27
target/linux/ar71xx/patches-3.2/011-MIPS-ath79-Add-config-symbol-for-the-AR933X-SoCs.patch
View File

@ -1,27 +0,0 @@
From 7ab361d321763ef6296f35eb18ae05be8e28e64a Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:08 +0200
Subject: [PATCH 11/27] MIPS: ath79: Add config symbol for the AR933X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2525/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -41,6 +41,9 @@ config SOC_AR913X
select USB_ARCH_HAS_EHCI
def_bool n
+config SOC_AR933X
+ def_bool n
+
config ATH79_DEV_AR913X_WMAC
depends on SOC_AR913X
def_bool n

45
target/linux/ar71xx/patches-3.2/012-USB-ehci-ath79-Add-device_id-entry-for-the-AR933X-So.patch
View File

@ -1,45 +0,0 @@
From 7191a2673adbddbbb5aea3489892119e698e77b6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:09 +0200
Subject: [PATCH 12/27] USB: ehci-ath79: Add device_id entry for the AR933X SoCs
Also make the USB_EHCI_ATH79 selectable for the AR933X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-ath79.c | 4 ++++
2 files changed, 5 insertions(+), 1 deletions(-)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -210,7 +210,7 @@ config USB_CNS3XXX_EHCI
config USB_EHCI_ATH79
bool "EHCI support for AR7XXX/AR9XXX SoCs"
- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X)
+ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
select USB_EHCI_ROOT_HUB_TT
default y
---help---
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -33,6 +33,10 @@ static const struct platform_device_id e
.driver_data = EHCI_ATH79_IP_V2,
},
{
+ .name = "ar933x-ehci",
+ .driver_data = EHCI_ATH79_IP_V2,
+ },
+ {
/* terminating entry */
},
};

88
target/linux/ar71xx/patches-3.2/013-MIPS-ath79-add-AR933X-specific-USB-platform-device-r.patch
View File

@ -1,88 +0,0 @@
From 1355a27c85ae89225e738b9016656a406542ed1b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 21:26:10 +0200
Subject: [PATCH 13/27] MIPS: ath79: add AR933X specific USB platform device registration
Also select the USB_ARCH_HAS_EHCI symbol in order to make the
EHCI driver available.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 1 +
arch/mips/ath79/dev-usb.c | 19 +++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 +++++++
3 files changed, 27 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -42,6 +42,7 @@ config SOC_AR913X
def_bool n
config SOC_AR933X
+ select USB_ARCH_HAS_EHCI
def_bool n
config ATH79_DEV_AR913X_WMAC
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -163,6 +163,23 @@ static void __init ar913x_usb_setup(void
platform_device_register(&ath79_ehci_device);
}
+static void __init ar933x_usb_setup(void)
+{
+ ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR933X_RESET_USB_HOST);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR933X_RESET_USB_PHY);
+ mdelay(10);
+
+ ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
+ ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
+ ath79_ehci_device.name = "ar933x-ehci";
+ platform_device_register(&ath79_ehci_device);
+}
+
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
@@ -173,6 +190,8 @@ void __init ath79_register_usb(void)
ar724x_usb_setup();
else if (soc_is_ar913x())
ar913x_usb_setup();
+ else if (soc_is_ar933x())
+ ar933x_usb_setup();
else
BUG();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -56,6 +56,9 @@
#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR933X_UART_SIZE 0x14
+#define AR933X_EHCI_BASE 0x1b000000
+#define AR933X_EHCI_SIZE 0x1000
+
/*
* DDR_CTRL block
*/
@@ -230,6 +233,10 @@
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
+#define AR933X_RESET_USB_HOST BIT(5)
+#define AR933X_RESET_USB_PHY BIT(4)
+#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define REV_ID_MAJOR_MASK 0xfff0

789
target/linux/ar71xx/patches-3.2/014-SERIAL-AR933X-Add-driver-for-the-built-in-UART-of-th.patch
View File

@ -1,789 +0,0 @@
From 1de387abd06fb67aaa8e27a48e378ffd9aaddd74 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 19:26:11 +0200
Subject: [PATCH 14/27] SERIAL: AR933X: Add driver for the built-in UART of the SoC
This patch adds the driver for the built-in UART of the
Atheros AR933X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2526/
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
.../include/asm/mach-ath79/ar933x_uart_platform.h | 18 +
drivers/tty/serial/Kconfig | 23 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/ar933x_uart.c | 688 ++++++++++++++++++++
include/linux/serial_core.h | 4 +
5 files changed, 734 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
create mode 100644 drivers/tty/serial/ar933x_uart.c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
@@ -0,0 +1,18 @@
+/*
+ * Platform data definition for Atheros AR933X UART
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _AR933X_UART_PLATFORM_H
+#define _AR933X_UART_PLATFORM_H
+
+struct ar933x_uart_platform_data {
+ unsigned uartclk;
+};
+
+#endif /* _AR933X_UART_PLATFORM_H */
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1610,4 +1610,27 @@ config SERIAL_XILINX_PS_UART_CONSOLE
help
Enable a Xilinx PS UART port to be the system console.
+config SERIAL_AR933X
+ bool "AR933X serial port support"
+ depends on SOC_AR933X
+ select SERIAL_CORE
+ help
+ If you have an Atheros AR933X SOC based board and want to use the
+ built-in UART of the SoC, say Y to this option.
+
+config SERIAL_AR933X_CONSOLE
+ bool "Console on AR933X serial port"
+ depends on SERIAL_AR933X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Enable a built-in UART port of the AR933X to be the system console.
+
+config SERIAL_AR933X_NR_UARTS
+ int "Maximum number of AR933X serial ports"
+ depends on SERIAL_AR933X
+ default "2"
+ help
+ Set this to the number of serial ports you want the driver
+ to support.
+
endmenu
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
--- /dev/null
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -0,0 +1,688 @@
+/*
+ * Atheros AR933X SoC built-in UART driver
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/mach-ath79/ar933x_uart.h>
+#include <asm/mach-ath79/ar933x_uart_platform.h>
+
+#define DRIVER_NAME "ar933x-uart"
+
+#define AR933X_DUMMY_STATUS_RD 0x01
+
+static struct uart_driver ar933x_uart_driver;
+
+struct ar933x_uart_port {
+ struct uart_port port;
+ unsigned int ier; /* shadow Interrupt Enable Register */
+};
+
+static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
+ int offset)
+{
+ return readl(up->port.membase + offset);
+}
+
+static inline void ar933x_uart_write(struct ar933x_uart_port *up,
+ int offset, unsigned int value)
+{
+ writel(value, up->port.membase + offset);
+}
+
+static inline void ar933x_uart_rmw(struct ar933x_uart_port *up,
+ unsigned int offset,
+ unsigned int mask,
+ unsigned int val)
+{
+ unsigned int t;
+
+ t = ar933x_uart_read(up, offset);
+ t &= ~mask;
+ t |= val;
+ ar933x_uart_write(up, offset, t);
+}
+
+static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up,
+ unsigned int offset,
+ unsigned int val)
+{
+ ar933x_uart_rmw(up, offset, 0, val);
+}
+
+static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up,
+ unsigned int offset,
+ unsigned int val)
+{
+ ar933x_uart_rmw(up, offset, val, 0);
+}
+
+static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
+{
+ up->ier |= AR933X_UART_INT_TX_EMPTY;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
+}
+
+static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
+{
+ up->ier &= ~AR933X_UART_INT_TX_EMPTY;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
+}
+
+static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
+{
+ unsigned int rdata;
+
+ rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
+ rdata |= AR933X_UART_DATA_TX_CSR;
+ ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
+}
+
+static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+ unsigned long flags;
+ unsigned int rdata;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR;
+}
+
+static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void ar933x_uart_start_tx(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+ ar933x_uart_start_tx_interrupt(up);
+}
+
+static void ar933x_uart_stop_tx(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+ ar933x_uart_stop_tx_interrupt(up);
+}
+
+static void ar933x_uart_stop_rx(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+ up->ier &= ~AR933X_UART_INT_RX_VALID;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
+}
+
+static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_BREAK);
+ else
+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_BREAK);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void ar933x_uart_enable_ms(struct uart_port *port)
+{
+}
+
+static void ar933x_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+ unsigned int cs;
+ unsigned long flags;
+ unsigned int baud, scale;
+
+ /* Only CS8 is supported */
+ new->c_cflag &= ~CSIZE;
+ new->c_cflag |= CS8;
+
+ /* Only one stop bit is supported */
+ new->c_cflag &= ~CSTOPB;
+
+ cs = 0;
+ if (new->c_cflag & PARENB) {
+ if (!(new->c_cflag & PARODD))
+ cs |= AR933X_UART_CS_PARITY_EVEN;
+ else
+ cs |= AR933X_UART_CS_PARITY_ODD;
+ } else {
+ cs |= AR933X_UART_CS_PARITY_NONE;
+ }
+
+ /* Mark/space parity is not supported */
+ new->c_cflag &= ~CMSPAR;
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ scale = (port->uartclk / (16 * baud)) - 1;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ up->port.ignore_status_mask = 0;
+
+ /* ignore all characters if CREAD is not set */
+ if ((new->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
+
+ ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
+ scale << AR933X_UART_CLOCK_SCALE_S | 8192);
+
+ /* setup configuration register */
+ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
+
+ /* enable host interrupt */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_HOST_INT_EN);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
+}
+
+static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
+{
+ struct tty_struct *tty;
+ int max_count = 256;
+
+ tty = tty_port_tty_get(&up->port.state->port);
+ do {
+ unsigned int rdata;
+ unsigned char ch;
+
+ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
+ if ((rdata & AR933X_UART_DATA_RX_CSR) == 0)
+ break;
+
+ /* remove the character from the FIFO */
+ ar933x_uart_write(up, AR933X_UART_DATA_REG,
+ AR933X_UART_DATA_RX_CSR);
+
+ if (!tty) {
+ /* discard the data if no tty available */
+ continue;
+ }
+
+ up->port.icount.rx++;
+ ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ continue;
+
+ if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ } while (max_count-- > 0);
+
+ if (tty) {
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ }
+}
+
+static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (uart_tx_stopped(&up->port))
+ return;
+
+ count = up->port.fifosize;
+ do {
+ unsigned int rdata;
+
+ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
+ if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
+ break;
+
+ if (up->port.x_char) {
+ ar933x_uart_putc(up, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit))
+ break;
+
+ ar933x_uart_putc(up, xmit->buf[xmit->tail]);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (!uart_circ_empty(xmit))
+ ar933x_uart_start_tx_interrupt(up);
+}
+
+static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
+{
+ struct ar933x_uart_port *up = dev_id;
+ unsigned int status;
+
+ status = ar933x_uart_read(up, AR933X_UART_CS_REG);
+ if ((status & AR933X_UART_CS_HOST_INT) == 0)
+ return IRQ_NONE;
+
+ spin_lock(&up->port.lock);
+
+ status = ar933x_uart_read(up, AR933X_UART_INT_REG);
+ status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
+
+ if (status & AR933X_UART_INT_RX_VALID) {
+ ar933x_uart_write(up, AR933X_UART_INT_REG,
+ AR933X_UART_INT_RX_VALID);
+ ar933x_uart_rx_chars(up);
+ }
+
+ if (status & AR933X_UART_INT_TX_EMPTY) {
+ ar933x_uart_write(up, AR933X_UART_INT_REG,
+ AR933X_UART_INT_TX_EMPTY);
+ ar933x_uart_stop_tx_interrupt(up);
+ ar933x_uart_tx_chars(up);
+ }
+
+ spin_unlock(&up->port.lock);
+
+ return IRQ_HANDLED;
+}
+
+static int ar933x_uart_startup(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+ unsigned long flags;
+ int ret;
+
+ ret = request_irq(up->port.irq, ar933x_uart_interrupt,
+ up->port.irqflags, dev_name(up->port.dev), up);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Enable HOST interrupts */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_HOST_INT_EN);
+
+ /* Enable RX interrupts */
+ up->ier = AR933X_UART_INT_RX_VALID;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static void ar933x_uart_shutdown(struct uart_port *port)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+ /* Disable all interrupts */
+ up->ier = 0;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
+
+ /* Disable break condition */
+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_BREAK);
+
+ free_irq(up->port.irq, up);
+}
+
+static const char *ar933x_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_AR933X) ? "AR933X UART" : NULL;
+}
+
+static void ar933x_uart_release_port(struct uart_port *port)
+{
+ /* Nothing to release ... */
+}
+
+static int ar933x_uart_request_port(struct uart_port *port)
+{
+ /* UARTs always present */
+ return 0;
+}
+
+static void ar933x_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_AR933X;
+}
+
+static int ar933x_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN &&
+ ser->type != PORT_AR933X)
+ return -EINVAL;
+
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ return -EINVAL;
+
+ if (ser->baud_base < 28800)
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops ar933x_uart_ops = {
+ .tx_empty = ar933x_uart_tx_empty,
+ .set_mctrl = ar933x_uart_set_mctrl,
+ .get_mctrl = ar933x_uart_get_mctrl,
+ .stop_tx = ar933x_uart_stop_tx,
+ .start_tx = ar933x_uart_start_tx,
+ .stop_rx = ar933x_uart_stop_rx,
+ .enable_ms = ar933x_uart_enable_ms,
+ .break_ctl = ar933x_uart_break_ctl,
+ .startup = ar933x_uart_startup,
+ .shutdown = ar933x_uart_shutdown,
+ .set_termios = ar933x_uart_set_termios,
+ .type = ar933x_uart_type,
+ .release_port = ar933x_uart_release_port,
+ .request_port = ar933x_uart_request_port,
+ .config_port = ar933x_uart_config_port,
+ .verify_port = ar933x_uart_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+
+static struct ar933x_uart_port *
+ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
+
+static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up)
+{
+ unsigned int status;
+ unsigned int timeout = 60000;
+
+ /* Wait up to 60ms for the character(s) to be sent. */
+ do {
+ status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
+ if (--timeout == 0)
+ break;
+ udelay(1);
+ } while ((status & AR933X_UART_DATA_TX_CSR) == 0);
+}
+
+static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
+{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
+ ar933x_uart_wait_xmitr(up);
+ ar933x_uart_putc(up, ch);
+}
+
+static void ar933x_uart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct ar933x_uart_port *up = ar933x_console_ports[co->index];
+ unsigned long flags;
+ unsigned int int_en;
+ int locked = 1;
+
+ local_irq_save(flags);
+
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&up->port.lock);
+ else
+ spin_lock(&up->port.lock);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
+
+ uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ ar933x_uart_wait_xmitr(up);
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en);
+
+ ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+
+ local_irq_restore(flags);
+}
+
+static int ar933x_uart_console_setup(struct console *co, char *options)
+{
+ struct ar933x_uart_port *up;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS)
+ return -EINVAL;
+
+ up = ar933x_console_ports[co->index];
+ if (!up)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static struct console ar933x_uart_console = {
+ .name = "ttyATH",
+ .write = ar933x_uart_console_write,
+ .device = uart_console_device,
+ .setup = ar933x_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ar933x_uart_driver,
+};
+
+static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
+{
+ ar933x_console_ports[up->port.line] = up;
+}
+
+#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console)
+
+#else
+
+static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {}
+
+#define AR933X_SERIAL_CONSOLE NULL
+
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
+
+static struct uart_driver ar933x_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = "ttyATH",
+ .nr = CONFIG_SERIAL_AR933X_NR_UARTS,
+ .cons = AR933X_SERIAL_CONSOLE,
+};
+
+static int __devinit ar933x_uart_probe(struct platform_device *pdev)
+{
+ struct ar933x_uart_platform_data *pdata;
+ struct ar933x_uart_port *up;
+ struct uart_port *port;
+ struct resource *mem_res;
+ struct resource *irq_res;
+ int id;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ id = pdev->id;
+ if (id == -1)
+ id = 0;
+
+ if (id > CONFIG_SERIAL_AR933X_NR_UARTS)
+ return -EINVAL;
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res) {
+ dev_err(&pdev->dev, "no MEM resource\n");
+ return -EINVAL;
+ }
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq_res) {
+ dev_err(&pdev->dev, "no IRQ resource\n");
+ return -EINVAL;
+ }
+
+ up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
+
+ port = &up->port;
+ port->mapbase = mem_res->start;
+
+ port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE);
+ if (!port->membase) {
+ ret = -ENOMEM;
+ goto err_free_up;
+ }
+
+ port->line = id;
+ port->irq = irq_res->start;
+ port->dev = &pdev->dev;
+ port->type = PORT_AR933X;
+ port->iotype = UPIO_MEM32;
+ port->uartclk = pdata->uartclk;
+
+ port->regshift = 2;
+ port->fifosize = AR933X_UART_FIFO_SIZE;
+ port->ops = &ar933x_uart_ops;
+
+ ar933x_uart_add_console_port(up);
+
+ ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
+ if (ret)
+ goto err_unmap;
+
+ platform_set_drvdata(pdev, up);
+ return 0;
+
+err_unmap:
+ iounmap(up->port.membase);
+err_free_up:
+ kfree(up);
+ return ret;
+}
+
+static int __devexit ar933x_uart_remove(struct platform_device *pdev)
+{
+ struct ar933x_uart_port *up;
+
+ up = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
+
+ if (up) {
+ uart_remove_one_port(&ar933x_uart_driver, &up->port);
+ iounmap(up->port.membase);
+ kfree(up);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ar933x_uart_platform_driver = {
+ .probe = ar933x_uart_probe,
+ .remove = __devexit_p(ar933x_uart_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ar933x_uart_init(void)
+{
+ int ret;
+
+ ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS;
+ ret = uart_register_driver(&ar933x_uart_driver);
+ if (ret)
+ goto err_out;
+
+ ret = platform_driver_register(&ar933x_uart_platform_driver);
+ if (ret)
+ goto err_unregister_uart_driver;
+
+ return 0;
+
+err_unregister_uart_driver:
+ uart_unregister_driver(&ar933x_uart_driver);
+err_out:
+ return ret;
+}
+
+static void __exit ar933x_uart_exit(void)
+{
+ platform_driver_unregister(&ar933x_uart_platform_driver);
+ uart_unregister_driver(&ar933x_uart_driver);
+}
+
+module_init(ar933x_uart_init);
+module_exit(ar933x_uart_exit);
+
+MODULE_DESCRIPTION("Atheros AR933X UART driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -207,6 +207,10 @@
/* Xilinx PSS UART */
#define PORT_XUARTPS 98
+/* Atheros AR933X SoC */
+#define PORT_AR933X 99
+
+
#ifdef __KERNEL__
#include <linux/compiler.h>

80
target/linux/ar71xx/patches-3.2/015-MIPS-ath79-register-UART-device-for-the-AR933X-SoCs.patch
View File

@ -1,80 +0,0 @@
From d9215f4c69b414f589eeeff002af7ef58b96b172 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 19:26:12 +0200
Subject: [PATCH 15/27] MIPS: ath79: register UART device for the AR933X SoCs
The AR933X SoCs does not have a 8250 compatible UART, they
are using a different UART core. Register a different platform
device for the different UART.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/dev-common.c | 38 ++++++++++++++++++++++++++++++++++++--
1 files changed, 36 insertions(+), 2 deletions(-)
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -20,6 +20,7 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ar933x_uart_platform.h>
#include "common.h"
#include "dev-common.h"
@@ -54,6 +55,30 @@ static struct platform_device ath79_uart
},
};
+static struct resource ar933x_uart_resources[] = {
+ {
+ .start = AR933X_UART_BASE,
+ .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = ATH79_MISC_IRQ_UART,
+ .end = ATH79_MISC_IRQ_UART,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ar933x_uart_platform_data ar933x_uart_data;
+static struct platform_device ar933x_uart_device = {
+ .name = "ar933x-uart",
+ .id = -1,
+ .resource = ar933x_uart_resources,
+ .num_resources = ARRAY_SIZE(ar933x_uart_resources),
+ .dev = {
+ .platform_data = &ar933x_uart_data,
+ },
+};
+
void __init ath79_register_uart(void)
{
struct clk *clk;
@@ -62,8 +87,17 @@ void __init ath79_register_uart(void)
if (IS_ERR(clk))
panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
- ath79_uart_data[0].uartclk = clk_get_rate(clk);
- platform_device_register(&ath79_uart_device);
+ if (soc_is_ar71xx() ||
+ soc_is_ar724x() ||
+ soc_is_ar913x()) {
+ ath79_uart_data[0].uartclk = clk_get_rate(clk);
+ platform_device_register(&ath79_uart_device);
+ } else if (soc_is_ar933x()) {
+ ar933x_uart_data.uartclk = clk_get_rate(clk);
+ platform_device_register(&ar933x_uart_device);
+ } else {
+ BUG();
+ }
}
static struct platform_device ath79_wdt_device = {

149
target/linux/ar71xx/patches-3.2/016-MIPS-ath79-Add-initial-support-for-the-Atheros-AP121.patch
View File

@ -1,149 +0,0 @@
From d7b27740e8376c1c147297b526f9a8e330c1fe17 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 20 Jun 2011 19:26:13 +0200
Subject: [PATCH 16/27] MIPS: ath79: Add initial support for the Atheros AP121 reference board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 11 +++++
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/mach-ap121.c | 88 ++++++++++++++++++++++++++++++++++++++++++
arch/mips/ath79/machtypes.h | 1 +
4 files changed, 101 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/ath79/mach-ap121.c
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,17 @@ if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
+config ATH79_MACH_AP121
+ bool "Atheros AP121 reference board"
+ select SOC_AR933X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP121 reference board.
+
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -25,5 +25,6 @@ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
--- /dev/null
+++ b/arch/mips/ath79/mach-ap121.c
@@ -0,0 +1,88 @@
+/*
+ * Atheros AP121 board support
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+
+#define AP121_GPIO_LED_WLAN 0
+#define AP121_GPIO_LED_USB 1
+
+#define AP121_GPIO_BTN_JUMPSTART 11
+#define AP121_GPIO_BTN_RESET 12
+
+#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
+
+#define AP121_CAL_DATA_ADDR 0x1fff1000
+
+static struct gpio_led ap121_leds_gpio[] __initdata = {
+ {
+ .name = "ap121:green:usb",
+ .gpio = AP121_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "ap121:green:wlan",
+ .gpio = AP121_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP121_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP121_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct spi_board_info ap121_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l1606e",
+ }
+};
+
+static struct ath79_spi_platform_data ap121_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+static void __init ap121_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+ ap121_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap121_gpio_keys),
+ ap121_gpio_keys);
+
+ ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+ ARRAY_SIZE(ap121_spi_info));
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+ ap121_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,6 +16,7 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
};

231
target/linux/ar71xx/patches-3.2/017-MIPS-Initial-PCI-support-for-Atheros-724x-SoCs.patch
View File

@ -1,231 +0,0 @@
From 958e444a5a7750c407ed0c90af28f74295478e99 Mon Sep 17 00:00:00 2001
From: Rene Bolldorf <xsecute@googlemail.com>
Date: Thu, 17 Nov 2011 14:25:09 +0000
Subject: [PATCH 17/27] MIPS: Initial PCI support for Atheros 724x SoCs.
[ralf@linux-mips.org: Fixed the odd formatting of all break statements.]
Signed-off-by: Rene Bolldorf <xsecute@googlemail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3019/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 +++
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-ath724x.c | 174 ++++++++++++++++++++++++
3 files changed, 196 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
create mode 100644 arch/mips/pci/pci-ath724x.c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/pci-ath724x.h
@@ -0,0 +1,21 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+#define __ASM_MACH_ATH79_PCI_ATH724X_H
+
+struct ath724x_pci_data {
+ int irq;
+ void *pdata;
+};
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+
+#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o
#
# These are still pretty much in the old state, watch, go blind.
--- /dev/null
+++ b/arch/mips/pci/pci-ath724x.c
@@ -0,0 +1,174 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+
+#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+
+#define ATH724X_PCI_DEV_BASE 0x14000000
+#define ATH724X_PCI_MEM_BASE 0x10000000
+#define ATH724X_PCI_MEM_SIZE 0x08000000
+
+static DEFINE_SPINLOCK(ath724x_pci_lock);
+static struct ath724x_pci_data *pci_data;
+static int pci_data_size;
+
+static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+{
+ unsigned long flags, addr, tval, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4) * 8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 2:
+ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 4:
+ *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+{
+ unsigned long flags, tval, addr, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xff000000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 2:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 4:
+ reg_write((ATH724X_PCI_DEV_BASE + where), value);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ath724x_pci_ops = {
+ .read = ath724x_pci_read,
+ .write = ath724x_pci_write,
+};
+
+static struct resource ath724x_io_resource = {
+ .name = "PCI IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource ath724x_mem_resource = {
+ .name = "PCI memory space",
+ .start = ATH724X_PCI_MEM_BASE,
+ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct pci_controller ath724x_pci_controller = {
+ .pci_ops = &ath724x_pci_ops,
+ .io_resource = &ath724x_io_resource,
+ .mem_resource = &ath724x_mem_resource,
+};
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+{
+ pci_data = data;
+ pci_data_size = size;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+{
+ unsigned int devfn = dev->devfn;
+ int irq = -1;
+
+ if (devfn > pci_data_size - 1)
+ return irq;
+
+ irq = pci_data[devfn].irq;
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ unsigned int devfn = dev->devfn;
+
+ if (devfn > pci_data_size - 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ dev->dev.platform_data = pci_data[devfn].pdata;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int __init ath724x_pcibios_init(void)
+{
+ register_pci_controller(&ath724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+arch_initcall(ath724x_pcibios_init);

184
target/linux/ar71xx/patches-3.2/018-Initial-support-for-the-Ubiquiti-Networks-XM-board-r.patch
View File

@ -1,184 +0,0 @@
From e6a1210bef8b48a946f1afb6d951f4b2448219ac Mon Sep 17 00:00:00 2001
From: Rene Bolldorf <xsecute@googlemail.com>
Date: Fri, 18 Nov 2011 00:17:42 +0000
Subject: [PATCH 18/27] Initial support for the Ubiquiti Networks XM board (rev 1.0).
Signed-off-by: Rene Bolldorf <xsecute@googlemail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3020/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 11 ++++
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/mach-ubnt-xm.c | 119 ++++++++++++++++++++++++++++++++++++++++
arch/mips/ath79/machtypes.h | 1 +
4 files changed, 132 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/ath79/mach-ubnt-xm.c
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -36,6 +36,16 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
+config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+
endmenu
config SOC_AR71XX
@@ -46,6 +56,7 @@ config SOC_AR71XX
config SOC_AR724X
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select HW_HAS_PCI
def_bool n
config SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
--- /dev/null
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -0,0 +1,119 @@
+/*
+ * Ubiquiti Networks XM (rev 1.0) board support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * Derived from: mach-pb44.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_PCI
+#include <linux/ath9k_platform.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+#endif /* CONFIG_PCI */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+
+#define UBNT_XM_GPIO_LED_L1 0
+#define UBNT_XM_GPIO_LED_L2 1
+#define UBNT_XM_GPIO_LED_L3 11
+#define UBNT_XM_GPIO_LED_L4 7
+
+#define UBNT_XM_GPIO_BTN_RESET 12
+
+#define UBNT_XM_KEYS_POLL_INTERVAL 20
+#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+#define UBNT_XM_PCI_IRQ 48
+#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
+
+static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt-xm:red:link1",
+ .gpio = UBNT_XM_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:orange:link2",
+ .gpio = UBNT_XM_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:green:link3",
+ .gpio = UBNT_XM_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:green:link4",
+ .gpio = UBNT_XM_GPIO_LED_L4,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UBNT_XM_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct spi_board_info ubnt_xm_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
+ }
+};
+
+static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ubnt_xm_eeprom_data;
+
+static struct ath724x_pci_data ubnt_xm_pci_data[] = {
+ {
+ .irq = UBNT_XM_PCI_IRQ,
+ .pdata = &ubnt_xm_eeprom_data,
+ },
+};
+#endif /* CONFIG_PCI */
+
+static void __init ubnt_xm_init(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+ ARRAY_SIZE(ubnt_xm_spi_info));
+
+#ifdef CONFIG_PCI
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+ ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+#endif /* CONFIG_PCI */
+
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ "UBNT-XM",
+ "Ubiquiti Networks XM (rev 1.0) board",
+ ubnt_xm_init);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -19,6 +19,7 @@ enum ath79_mach_type {
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
};
#endif /* _ATH79_MACHTYPE_H */

51
target/linux/ar71xx/patches-3.2/019-MIPS-ath79-Store-the-SoC-revision-in-a-global-variab.patch
View File

@ -1,51 +0,0 @@
From d3cdd75072bc5df5b18dcafb45cbe9a3a62b840b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:46 +0000
Subject: [PATCH 19/27] MIPS: ath79: Store the SoC revision in a global variable
Knowing the exact revision of the SoC is required to make runtime decisions
in various code paths. We have determined the SoC revision already, so we
only need to store that in a global variable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3027/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/common.c | 1 +
arch/mips/ath79/setup.c | 2 ++
arch/mips/include/asm/mach-ath79/ath79.h | 1 +
3 files changed, 4 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -30,6 +30,7 @@ u32 ath79_ddr_freq;
EXPORT_SYMBOL_GPL(ath79_ddr_freq);
enum ath79_soc_type ath79_soc;
+unsigned int ath79_soc_rev;
void __iomem *ath79_pll_base;
void __iomem *ath79_reset_base;
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -149,6 +149,8 @@ static void __init ath79_detect_sys_type
panic("ath79: unknown SoC, id:0x%08x\n", id);
}
+ ath79_soc_rev = rev;
+
sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
pr_info("SoC: %s\n", ath79_sys_type);
}
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -32,6 +32,7 @@ enum ath79_soc_type {
};
extern enum ath79_soc_type ath79_soc;
+extern unsigned int ath79_soc_rev;
static inline int soc_is_ar71xx(void)
{

97
target/linux/ar71xx/patches-3.2/020-MIPS-ath79-Remove-ar913x-from-common-variable-and-fu.patch
View File

@ -1,97 +0,0 @@
From cc2140939233382c1e58abc1d0a1b88fdd6215e6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:53 +0000
Subject: [PATCH 20/27] MIPS: ath79: Remove 'ar913x' from common variable and function names
The wireless MAC specific variables and the registration code can be shared
between multiple SoCs. Remove the 'ar913x' part from the function and
variable names to avoid confusions.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3028/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/dev-ar913x-wmac.c | 20 ++++++++++----------
arch/mips/ath79/dev-ar913x-wmac.h | 8 ++++----
arch/mips/ath79/mach-ap81.c | 2 +-
3 files changed, 15 insertions(+), 15 deletions(-)
--- a/arch/mips/ath79/dev-ar913x-wmac.c
+++ b/arch/mips/ath79/dev-ar913x-wmac.c
@@ -19,9 +19,9 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-ar913x-wmac.h"
-static struct ath9k_platform_data ar913x_wmac_data;
+static struct ath9k_platform_data ath79_wmac_data;
-static struct resource ar913x_wmac_resources[] = {
+static struct resource ath79_wmac_resources[] = {
{
.start = AR913X_WMAC_BASE,
.end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1,
@@ -33,21 +33,21 @@ static struct resource ar913x_wmac_resou
},
};
-static struct platform_device ar913x_wmac_device = {
+static struct platform_device ath79_wmac_device = {
.name = "ath9k",
.id = -1,
- .resource = ar913x_wmac_resources,
- .num_resources = ARRAY_SIZE(ar913x_wmac_resources),
+ .resource = ath79_wmac_resources,
+ .num_resources = ARRAY_SIZE(ath79_wmac_resources),
.dev = {
- .platform_data = &ar913x_wmac_data,
+ .platform_data = &ath79_wmac_data,
},
};
-void __init ath79_register_ar913x_wmac(u8 *cal_data)
+void __init ath79_register_wmac(u8 *cal_data)
{
if (cal_data)
- memcpy(ar913x_wmac_data.eeprom_data, cal_data,
- sizeof(ar913x_wmac_data.eeprom_data));
+ memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ sizeof(ath79_wmac_data.eeprom_data));
/* reset the WMAC */
ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
@@ -56,5 +56,5 @@ void __init ath79_register_ar913x_wmac(u
ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
mdelay(10);
- platform_device_register(&ar913x_wmac_device);
+ platform_device_register(&ath79_wmac_device);
}
--- a/arch/mips/ath79/dev-ar913x-wmac.h
+++ b/arch/mips/ath79/dev-ar913x-wmac.h
@@ -9,9 +9,9 @@
* by the Free Software Foundation.
*/
-#ifndef _ATH79_DEV_AR913X_WMAC_H
-#define _ATH79_DEV_AR913X_WMAC_H
+#ifndef _ATH79_DEV_WMAC_H
+#define _ATH79_DEV_WMAC_H
-void ath79_register_ar913x_wmac(u8 *cal_data);
+void ath79_register_wmac(u8 *cal_data);
-#endif /* _ATH79_DEV_AR913X_WMAC_H */
+#endif /* _ATH79_DEV_WMAC_H */
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -92,7 +92,7 @@ static void __init ap81_setup(void)
ap81_gpio_keys);
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
- ath79_register_ar913x_wmac(cal_data);
+ ath79_register_wmac(cal_data);
ath79_register_usb();
}

65
target/linux/ar71xx/patches-3.2/021-MIPS-ath79-Separate-AR913x-SoC-specific-WMAC-setup-c.patch
View File

@ -1,65 +0,0 @@
From 6e3f244874b8ae660136531b696ad05abe549607 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:53 +0000
Subject: [PATCH 21/27] MIPS: ath79: Separate AR913x SoC specific WMAC setup code
The device registration code can be shared between the different SoCs, but
the required setup code varies Move AR913x specific setup code into a
separate function in order to make adding support for another SoCs easier.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3029/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/dev-ar913x-wmac.c | 24 +++++++++++++++++-------
1 files changed, 17 insertions(+), 7 deletions(-)
--- a/arch/mips/ath79/dev-ar913x-wmac.c
+++ b/arch/mips/ath79/dev-ar913x-wmac.c
@@ -23,8 +23,7 @@ static struct ath9k_platform_data ath79_
static struct resource ath79_wmac_resources[] = {
{
- .start = AR913X_WMAC_BASE,
- .end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1,
+ /* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
}, {
.start = ATH79_CPU_IRQ_IP2,
@@ -43,12 +42,8 @@ static struct platform_device ath79_wmac
},
};
-void __init ath79_register_wmac(u8 *cal_data)
+static void __init ar913x_wmac_setup(void)
{
- if (cal_data)
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
/* reset the WMAC */
ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
mdelay(10);
@@ -56,5 +51,20 @@ void __init ath79_register_wmac(u8 *cal_
ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
mdelay(10);
+ ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+}
+
+void __init ath79_register_wmac(u8 *cal_data)
+{
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+ else
+ BUG();
+
+ if (cal_data)
+ memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ sizeof(ath79_wmac_data.eeprom_data));
+
platform_device_register(&ath79_wmac_device);
}

113
target/linux/ar71xx/patches-3.2/022-MIPS-ath79-Add-AR933x-specific-WMAC-setup-code.patch
View File

@ -1,113 +0,0 @@
From e2201a02b529acc65a5a1b19a52b93f9c2d98088 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:53 +0000
Subject: [PATCH 22/27] MIPS: ath79: Add AR933x specific WMAC setup code
The wireless MAC of the AR933x SoCs uses different base address, and
requires different setup code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3030/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/dev-ar913x-wmac.c | 43 ++++++++++++++++++++++-
arch/mips/ath79/dev-ar913x-wmac.h | 4 +-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++-
3 files changed, 46 insertions(+), 5 deletions(-)
--- a/arch/mips/ath79/dev-ar913x-wmac.c
+++ b/arch/mips/ath79/dev-ar913x-wmac.c
@@ -1,7 +1,7 @@
/*
- * Atheros AR913X SoC built-in WMAC device support
+ * Atheros AR913X/AR933X SoC built-in WMAC device support
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -55,10 +55,49 @@ static void __init ar913x_wmac_setup(voi
ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
}
+
+static int ar933x_wmac_reset(void)
+{
+ ath79_device_reset_clear(AR933X_RESET_WMAC);
+ ath79_device_reset_set(AR933X_RESET_WMAC);
+
+ return 0;
+}
+
+static int ar933x_r1_get_wmac_revision(void)
+{
+ return ath79_soc_rev;
+}
+
+static void __init ar933x_wmac_setup(void)
+{
+ u32 t;
+
+ ar933x_wmac_reset();
+
+ ath79_wmac_device.name = "ar933x_wmac";
+
+ ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+ ath79_wmac_data.is_clk_25mhz = false;
+ else
+ ath79_wmac_data.is_clk_25mhz = true;
+
+ if (ath79_soc_rev == 1)
+ ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
+
+ ath79_wmac_data.external_reset = ar933x_wmac_reset;
+}
+
void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
+ if (soc_is_ar933x())
+ ar933x_wmac_setup();
else
BUG();
--- a/arch/mips/ath79/dev-ar913x-wmac.h
+++ b/arch/mips/ath79/dev-ar913x-wmac.h
@@ -1,7 +1,7 @@
/*
- * Atheros AR913X SoC built-in WMAC device support
+ * Atheros AR913X/AR933X SoC built-in WMAC device support
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -55,7 +55,8 @@
#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR933X_UART_SIZE 0x14
-
+#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+#define AR933X_WMAC_SIZE 0x20000
#define AR933X_EHCI_BASE 0x1b000000
#define AR933X_EHCI_SIZE 0x1000
@@ -233,6 +234,7 @@
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
+#define AR933X_RESET_WMAC BIT(11)
#define AR933X_RESET_USB_HOST BIT(5)
#define AR933X_RESET_USB_PHY BIT(4)
#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)

79
target/linux/ar71xx/patches-3.2/023-MIPS-ath79-Rename-ATH79_DEV_AR913X_WMAC-option-to-AT.patch
View File

@ -1,79 +0,0 @@
From b784c5ab6423d0327d34d08e3532a16a4563e845 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:54 +0000
Subject: [PATCH 23/27] MIPS: ath79: Rename ATH79_DEV_AR913X_WMAC option to ATH79_DEV_WMAC
The ATH79_DEV_AR913X_WMAC option was used to select the AR913x specific
wireless MAC registration code. The registration code now supports the
AR933X SoCs as well. Rename the option to reflect the changes.
Also make the new option depends on SOC_AR933X.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3031/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Kconfig | 11 ++++++-----
arch/mips/ath79/Makefile | 2 +-
2 files changed, 7 insertions(+), 6 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -9,6 +9,7 @@ config ATH79_MACH_AP121
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros AP121 reference board.
@@ -16,11 +17,11 @@ config ATH79_MACH_AP121
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
- select ATH79_DEV_AR913X_WMAC
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
@@ -67,10 +68,6 @@ config SOC_AR933X
select USB_ARCH_HAS_EHCI
def_bool n
-config ATH79_DEV_AR913X_WMAC
- depends on SOC_AR913X
- def_bool n
-
config ATH79_DEV_GPIO_BUTTONS
def_bool n
@@ -83,4 +80,8 @@ config ATH79_DEV_SPI
config ATH79_DEV_USB
def_bool n
+config ATH79_DEV_WMAC
+ depends on (SOC_AR913X || SOC_AR933X)
+ def_bool n
+
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -16,11 +16,11 @@ obj-$(CONFIG_EARLY_PRINTK) += early_pri
# Devices
#
obj-y += dev-common.o
-obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += dev-ar913x-wmac.o
obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
+obj-$(CONFIG_ATH79_DEV_WMAC) += dev-ar913x-wmac.o
#
# Machines

41
target/linux/ar71xx/patches-3.2/024-MIPS-ath79-Register-the-wireless-MAC-device-on-the-A.patch
View File

@ -1,41 +0,0 @@
From 7091af5ca0aad47826a4e3f699a7985e2d8aa886 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:54 +0000
Subject: [PATCH 24/27] MIPS: ath79: Register the wireless MAC device on the AP121 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/mach-ap121.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -13,6 +13,7 @@
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
+#include "dev-ar913x-wmac.h"
#define AP121_GPIO_LED_WLAN 0
#define AP121_GPIO_LED_USB 1
@@ -73,6 +74,8 @@ static struct ath79_spi_platform_data ap
static void __init ap121_setup(void)
{
+ u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
ap121_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
@@ -82,6 +85,7 @@ static void __init ap121_setup(void)
ath79_register_spi(&ap121_spi_data, ap121_spi_info,
ARRAY_SIZE(ap121_spi_info));
ath79_register_usb();
+ ath79_register_wmac(cal_data);
}
MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",

96
target/linux/ar71xx/patches-3.2/025-MIPS-ath79-Rename-dev-ar913x-wmac.h-to-dev-wmac.h.patch
View File

@ -1,96 +0,0 @@
From ece52fe72b70e35f72edf940233d125257a5f4bc Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:54 +0000
Subject: [PATCH 25/27] MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h
The 'ar913x' part was removed from the common variable and function names,
so remove that from the relevant header file name as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/dev-ar913x-wmac.c | 2 +-
arch/mips/ath79/dev-ar913x-wmac.h | 17 -----------------
arch/mips/ath79/dev-wmac.h | 17 +++++++++++++++++
arch/mips/ath79/mach-ap121.c | 2 +-
arch/mips/ath79/mach-ap81.c | 2 +-
5 files changed, 20 insertions(+), 20 deletions(-)
delete mode 100644 arch/mips/ath79/dev-ar913x-wmac.h
create mode 100644 arch/mips/ath79/dev-wmac.h
--- a/arch/mips/ath79/dev-ar913x-wmac.c
+++ b/arch/mips/ath79/dev-ar913x-wmac.c
@@ -17,7 +17,7 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
-#include "dev-ar913x-wmac.h"
+#include "dev-wmac.h"
static struct ath9k_platform_data ath79_wmac_data;
--- a/arch/mips/ath79/dev-ar913x-wmac.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Atheros AR913X/AR933X SoC built-in WMAC device support
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_WMAC_H
-#define _ATH79_DEV_WMAC_H
-
-void ath79_register_wmac(u8 *cal_data);
-
-#endif /* _ATH79_DEV_WMAC_H */
--- /dev/null
+++ b/arch/mips/ath79/dev-wmac.h
@@ -0,0 +1,17 @@
+/*
+ * Atheros AR913X/AR933X SoC built-in WMAC device support
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_WMAC_H
+#define _ATH79_DEV_WMAC_H
+
+void ath79_register_wmac(u8 *cal_data);
+
+#endif /* _ATH79_DEV_WMAC_H */
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -13,7 +13,7 @@
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-wmac.h"
#define AP121_GPIO_LED_WLAN 0
#define AP121_GPIO_LED_USB 1
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -10,7 +10,7 @@
*/
#include "machtypes.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"

255
target/linux/ar71xx/patches-3.2/026-MIPS-ath79-Rename-dev-ar913x-wmac.c-to-dev-wmac.c.patch
View File

@ -1,255 +0,0 @@
From c1999a36c113e583f785728b3d8f7a26412c61cd Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 00:17:54 +0000
Subject: [PATCH 26/27] MIPS: ath79: Rename dev-ar913x-wmac.c to dev-wmac.c
Rename the file as a last step of the 'ar913x' removal changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ath79/Makefile | 2 +-
arch/mips/ath79/dev-ar913x-wmac.c | 109 -------------------------------------
arch/mips/ath79/dev-wmac.c | 109 +++++++++++++++++++++++++++++++++++++
3 files changed, 110 insertions(+), 110 deletions(-)
delete mode 100644 arch/mips/ath79/dev-ar913x-wmac.c
create mode 100644 arch/mips/ath79/dev-wmac.c
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) +=
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-ar913x-wmac.o
+obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
#
# Machines
--- a/arch/mips/ath79/dev-ar913x-wmac.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Atheros AR913X/AR933X SoC built-in WMAC device support
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "dev-wmac.h"
-
-static struct ath9k_platform_data ath79_wmac_data;
-
-static struct resource ath79_wmac_resources[] = {
- {
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_MEM,
- }, {
- .start = ATH79_CPU_IRQ_IP2,
- .end = ATH79_CPU_IRQ_IP2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ath79_wmac_device = {
- .name = "ath9k",
- .id = -1,
- .resource = ath79_wmac_resources,
- .num_resources = ARRAY_SIZE(ath79_wmac_resources),
- .dev = {
- .platform_data = &ath79_wmac_data,
- },
-};
-
-static void __init ar913x_wmac_setup(void)
-{
- /* reset the WMAC */
- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
-}
-
-
-static int ar933x_wmac_reset(void)
-{
- ath79_device_reset_clear(AR933X_RESET_WMAC);
- ath79_device_reset_set(AR933X_RESET_WMAC);
-
- return 0;
-}
-
-static int ar933x_r1_get_wmac_revision(void)
-{
- return ath79_soc_rev;
-}
-
-static void __init ar933x_wmac_setup(void)
-{
- u32 t;
-
- ar933x_wmac_reset();
-
- ath79_wmac_device.name = "ar933x_wmac";
-
- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-
- if (ath79_soc_rev == 1)
- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
-
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
-}
-
-void __init ath79_register_wmac(u8 *cal_data)
-{
- if (soc_is_ar913x())
- ar913x_wmac_setup();
- if (soc_is_ar933x())
- ar933x_wmac_setup();
- else
- BUG();
-
- if (cal_data)
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
- platform_device_register(&ath79_wmac_device);
-}
--- /dev/null
+++ b/arch/mips/ath79/dev-wmac.c
@@ -0,0 +1,109 @@
+/*
+ * Atheros AR913X/AR933X SoC built-in WMAC device support
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "dev-wmac.h"
+
+static struct ath9k_platform_data ath79_wmac_data;
+
+static struct resource ath79_wmac_resources[] = {
+ {
+ /* .start and .end fields are filled dynamically */
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = ATH79_CPU_IRQ_IP2,
+ .end = ATH79_CPU_IRQ_IP2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ath79_wmac_device = {
+ .name = "ath9k",
+ .id = -1,
+ .resource = ath79_wmac_resources,
+ .num_resources = ARRAY_SIZE(ath79_wmac_resources),
+ .dev = {
+ .platform_data = &ath79_wmac_data,
+ },
+};
+
+static void __init ar913x_wmac_setup(void)
+{
+ /* reset the WMAC */
+ ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+ mdelay(10);
+
+ ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+ mdelay(10);
+
+ ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+}
+
+
+static int ar933x_wmac_reset(void)
+{
+ ath79_device_reset_clear(AR933X_RESET_WMAC);
+ ath79_device_reset_set(AR933X_RESET_WMAC);
+
+ return 0;
+}
+
+static int ar933x_r1_get_wmac_revision(void)
+{
+ return ath79_soc_rev;
+}
+
+static void __init ar933x_wmac_setup(void)
+{
+ u32 t;
+
+ ar933x_wmac_reset();
+
+ ath79_wmac_device.name = "ar933x_wmac";
+
+ ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+ ath79_wmac_data.is_clk_25mhz = false;
+ else
+ ath79_wmac_data.is_clk_25mhz = true;
+
+ if (ath79_soc_rev == 1)
+ ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
+
+ ath79_wmac_data.external_reset = ar933x_wmac_reset;
+}
+
+void __init ath79_register_wmac(u8 *cal_data)
+{
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+ if (soc_is_ar933x())
+ ar933x_wmac_setup();
+ else
+ BUG();
+
+ if (cal_data)
+ memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ sizeof(ath79_wmac_data.eeprom_data));
+
+ platform_device_register(&ath79_wmac_device);
+}

43
target/linux/ar71xx/patches-3.2/027-watchdog-ath79_wdt-flush-register-writes.patch
View File

@ -1,43 +0,0 @@
From 156560a512a39284148d556ab96e2e833e816666 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 23 Dec 2011 19:25:42 +0100
Subject: [PATCH 27/27] watchdog: ath79_wdt: flush register writes
The watchdog register writes required to have a flush
in order to commit the values to the register. Without
the flush, the driver not function correctly on AR934X
SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/ath79_wdt.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
--- a/drivers/watchdog/ath79_wdt.c
+++ b/drivers/watchdog/ath79_wdt.c
@@ -68,17 +68,23 @@ static int max_timeout;
static inline void ath79_wdt_keepalive(void)
{
ath79_reset_wr(AR71XX_RESET_REG_WDOG, wdt_freq * timeout);
+ /* flush write */
+ ath79_reset_rr(AR71XX_RESET_REG_WDOG);
}
static inline void ath79_wdt_enable(void)
{
ath79_wdt_keepalive();
ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR);
+ /* flush write */
+ ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL);
}
static inline void ath79_wdt_disable(void)
{
ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE);
+ /* flush write */
+ ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL);
}
static int ath79_wdt_set_timeout(int val)

24
target/linux/ar71xx/patches-3.2/101-MIPS-ath79-avoid-a-kernel-bug-on-AR913X.patch
View File

@ -1,24 +0,0 @@
From cf6855546330c3d349d41496975f32255bb6fd07 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 22:02:57 +0100
Subject: [PATCH 01/35] MIPS: ath79: avoid a kernel bug on AR913X
Wireless mac registration causes a BUG on AR913X SoCs due to
a missing 'else'.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/dev-wmac.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_
{
if (soc_is_ar913x())
ar913x_wmac_setup();
- if (soc_is_ar933x())
+ else if (soc_is_ar933x())
ar933x_wmac_setup();
else
BUG();

151
target/linux/ar71xx/patches-3.2/102-MIPS-ath79-separate-common-PCI-code.patch
View File

@ -1,151 +0,0 @@
From c98b48027516a2e71688a5957e4e0120f4aa8c61 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 09:47:44 +0100
Subject: [PATCH 02/35] MIPS: ath79: separate common PCI code
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The 'pcibios_map_irq' and 'pcibios_plat_dev_init'
are common functions and only instance one of them
can be present in a single kernel.
Currently these functions can be built only if the
CONFIG_SOC_AR724X option is selected. However the
ath79 platform contain support for the AR71XX SoCs,.
The AR71XX SoCs have a differnet PCI controller,
and those will require a different code.
Move the common PCI code into a separeate file in
order to be able to use that with other SoCs as
well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: René Bolldorf <xsecute@googlemail.com>
v4: - add an Acked-by tag from René
v3: - no changes
v2: - no changes
---
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/pci.c | 46 +++++++++++++++++++++++++++++++++++++++++++
arch/mips/pci/pci-ath724x.c | 34 -------------------------------
3 files changed, 47 insertions(+), 34 deletions(-)
create mode 100644 arch/mips/ath79/pci.c
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -11,6 +11,7 @@
obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_PCI) += pci.o
#
# Devices
--- /dev/null
+++ b/arch/mips/ath79/pci.c
@@ -0,0 +1,46 @@
+/*
+ * Atheros AR71XX/AR724X specific PCI setup code
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+
+static struct ath724x_pci_data *pci_data;
+static int pci_data_size;
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+{
+ pci_data = data;
+ pci_data_size = size;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+{
+ unsigned int devfn = dev->devfn;
+ int irq = -1;
+
+ if (devfn > pci_data_size - 1)
+ return irq;
+
+ irq = pci_data[devfn].irq;
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ unsigned int devfn = dev->devfn;
+
+ if (devfn > pci_data_size - 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ dev->dev.platform_data = pci_data[devfn].pdata;
+
+ return PCIBIOS_SUCCESSFUL;
+}
--- a/arch/mips/pci/pci-ath724x.c
+++ b/arch/mips/pci/pci-ath724x.c
@@ -9,7 +9,6 @@
*/
#include <linux/pci.h>
-#include <asm/mach-ath79/pci-ath724x.h>
#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
@@ -19,8 +18,6 @@
#define ATH724X_PCI_MEM_SIZE 0x08000000
static DEFINE_SPINLOCK(ath724x_pci_lock);
-static struct ath724x_pci_data *pci_data;
-static int pci_data_size;
static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
@@ -133,37 +130,6 @@ static struct pci_controller ath724x_pci
.mem_resource = &ath724x_mem_resource,
};
-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
-{
- pci_data = data;
- pci_data_size = size;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
-{
- unsigned int devfn = dev->devfn;
- int irq = -1;
-
- if (devfn > pci_data_size - 1)
- return irq;
-
- irq = pci_data[devfn].irq;
-
- return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- unsigned int devfn = dev->devfn;
-
- if (devfn > pci_data_size - 1)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- dev->dev.platform_data = pci_data[devfn].pdata;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
static int __init ath724x_pcibios_init(void)
{
register_pci_controller(&ath724x_pci_controller);

103
target/linux/ar71xx/patches-3.2/103-MIPS-ath79-rename-pci-ath724x.h.patch
View File

@ -1,103 +0,0 @@
From 204fd70abd99099f6c2e2213a2baa1d51c03a039 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 09:50:50 +0100
Subject: [PATCH 03/35] MIPS: ath79: rename pci-ath724x.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The declared function in this header file is used by the
ath79 platform code only. Move the header to the platform
directory.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: René Bolldorf <xsecute@googlemail.com>
v4: - add an Acked-by tag from René
v3: - move include "pci.h" out of the #ifdef CONFIG_PCI section
v2: - no changes
---
arch/mips/ath79/mach-ubnt-xm.c | 2 +-
arch/mips/ath79/pci.c | 2 +-
arch/mips/ath79/pci.h | 21 +++++++++++++++++++++
arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 ---------------------
4 files changed, 23 insertions(+), 23 deletions(-)
create mode 100644 arch/mips/ath79/pci.h
delete mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -15,13 +15,13 @@
#ifdef CONFIG_PCI
#include <linux/ath9k_platform.h>
-#include <asm/mach-ath79/pci-ath724x.h>
#endif /* CONFIG_PCI */
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
+#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -9,7 +9,7 @@
*/
#include <linux/pci.h>
-#include <asm/mach-ath79/pci-ath724x.h>
+#include "pci.h"
static struct ath724x_pci_data *pci_data;
static int pci_data_size;
--- /dev/null
+++ b/arch/mips/ath79/pci.h
@@ -0,0 +1,21 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+#define __ASM_MACH_ATH79_PCI_ATH724X_H
+
+struct ath724x_pci_data {
+ int irq;
+ void *pdata;
+};
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+
+#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
--- a/arch/mips/include/asm/mach-ath79/pci-ath724x.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Atheros 724x PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
-#define __ASM_MACH_ATH79_PCI_ATH724X_H
-
-struct ath724x_pci_data {
- int irq;
- void *pdata;
-};
-
-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
-
-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */

62
target/linux/ar71xx/patches-3.2/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch
View File

@ -1,62 +0,0 @@
From 7e59b95e3424c078de0d75d699433da0dd289fc1 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 10:13:37 +0100
Subject: [PATCH 04/35] MIPS: ath79: make ath724x_pcibios_init visible for external code
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: René Bolldorf <xsecute@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v4: - add a sob tag
v3: - no changes
v2: - fix a typo in my e-mail address
---
arch/mips/include/asm/mach-ath79/pci.h | 20 ++++++++++++++++++++
arch/mips/pci/pci-ath724x.c | 3 ++-
2 files changed, 22 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ath79/pci.h
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -0,0 +1,20 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PCI_H
+#define __ASM_MACH_ATH79_PCI_H
+
+#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+int ath724x_pcibios_init(void);
+#else
+static inline int ath724x_pcibios_init(void) { return 0 };
+#endif
+
+#endif /* __ASM_MACH_ATH79_PCI_H */
--- a/arch/mips/pci/pci-ath724x.c
+++ b/arch/mips/pci/pci-ath724x.c
@@ -9,6 +9,7 @@
*/
#include <linux/pci.h>
+#include <asm/mach-ath79/pci.h>
#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
@@ -130,7 +131,7 @@ static struct pci_controller ath724x_pci
.mem_resource = &ath724x_mem_resource,
};
-static int __init ath724x_pcibios_init(void)
+int __init ath724x_pcibios_init(void)
{
register_pci_controller(&ath724x_pci_controller);

80
target/linux/ar71xx/patches-3.2/105-MIPS-ath79-add-a-common-PCI-registration-function.patch
View File

@ -1,80 +0,0 @@
From fbf38a9b03d0c47ed602f090ebb2d8ecc0d51d04 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 10:25:26 +0100
Subject: [PATCH 05/35] MIPS: ath79: add a common PCI registration function
The current code unconditionally registers the AR724X
specific PCI controller, even if the kernel is running
on a different SoC.
Add a common function for PCI controller registration,
and only register the AR724X PCI controller if the kernel
is running on an AR724X SoC.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v4: - simplify ath79_register_pci function
v3: - fix compile error if CONFIG_PCI is not defined
- add __init annotation to ath79_register_pci
v2: - no changes
---
arch/mips/ath79/mach-ubnt-xm.c | 1 +
arch/mips/ath79/pci.c | 10 ++++++++++
arch/mips/ath79/pci.h | 6 ++++++
arch/mips/pci/pci-ath724x.c | 2 --
4 files changed, 17 insertions(+), 2 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -111,6 +111,7 @@ static void __init ubnt_xm_init(void)
ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
#endif /* CONFIG_PCI */
+ ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -9,6 +9,8 @@
*/
#include <linux/pci.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
#include "pci.h"
static struct ath724x_pci_data *pci_data;
@@ -44,3 +46,11 @@ int pcibios_plat_dev_init(struct pci_dev
return PCIBIOS_SUCCESSFUL;
}
+
+int __init ath79_register_pci(void)
+{
+ if (soc_is_ar724x())
+ return ath724x_pcibios_init();
+
+ return -ENODEV;
+}
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -18,4 +18,10 @@ struct ath724x_pci_data {
void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+#ifdef CONFIG_PCI
+int ath79_register_pci(void);
+#else
+static inline int ath79_register_pci(void) { return 0; }
+#endif
+
#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
--- a/arch/mips/pci/pci-ath724x.c
+++ b/arch/mips/pci/pci-ath724x.c
@@ -137,5 +137,3 @@ int __init ath724x_pcibios_init(void)
return PCIBIOS_SUCCESSFUL;
}
-
-arch_initcall(ath724x_pcibios_init);

318
target/linux/ar71xx/patches-3.2/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch
View File

@ -1,318 +0,0 @@
From 9510a9988638ae2386277a832fab2df8ca37d75a Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 11:07:26 +0100
Subject: [PATCH 06/35] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: René Bolldorf <xsecute@googlemail.com>
v4: - add an Acked-by tag from René
v4: - no changes
v3: - no changes
v2: - no changes
---
arch/mips/pci/Makefile | 2 +-
arch/mips/pci/pci-ar724x.c | 139 +++++++++++++++++++++++++++++++++++++++++++
arch/mips/pci/pci-ath724x.c | 139 -------------------------------------------
3 files changed, 140 insertions(+), 140 deletions(-)
create mode 100644 arch/mips/pci/pci-ar724x.c
delete mode 100644 arch/mips/pci/pci-ath724x.c
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
-obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o
+obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
#
# These are still pretty much in the old state, watch, go blind.
--- /dev/null
+++ b/arch/mips/pci/pci-ar724x.c
@@ -0,0 +1,139 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/mach-ath79/pci.h>
+
+#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+
+#define ATH724X_PCI_DEV_BASE 0x14000000
+#define ATH724X_PCI_MEM_BASE 0x10000000
+#define ATH724X_PCI_MEM_SIZE 0x08000000
+
+static DEFINE_SPINLOCK(ath724x_pci_lock);
+
+static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+{
+ unsigned long flags, addr, tval, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4) * 8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 2:
+ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 4:
+ *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+{
+ unsigned long flags, tval, addr, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xff000000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 2:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 4:
+ reg_write((ATH724X_PCI_DEV_BASE + where), value);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ath724x_pci_ops = {
+ .read = ath724x_pci_read,
+ .write = ath724x_pci_write,
+};
+
+static struct resource ath724x_io_resource = {
+ .name = "PCI IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource ath724x_mem_resource = {
+ .name = "PCI memory space",
+ .start = ATH724X_PCI_MEM_BASE,
+ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct pci_controller ath724x_pci_controller = {
+ .pci_ops = &ath724x_pci_ops,
+ .io_resource = &ath724x_io_resource,
+ .mem_resource = &ath724x_mem_resource,
+};
+
+int __init ath724x_pcibios_init(void)
+{
+ register_pci_controller(&ath724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
+}
--- a/arch/mips/pci/pci-ath724x.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Atheros 724x PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <asm/mach-ath79/pci.h>
-
-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-
-#define ATH724X_PCI_DEV_BASE 0x14000000
-#define ATH724X_PCI_MEM_BASE 0x10000000
-#define ATH724X_PCI_MEM_SIZE 0x08000000
-
-static DEFINE_SPINLOCK(ath724x_pci_lock);
-
-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t *value)
-{
- unsigned long flags, addr, tval, mask;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- spin_lock_irqsave(&ath724x_pci_lock, flags);
-
- switch (size) {
- case 1:
- addr = where & ~3;
- mask = 0xff000000 >> ((where % 4) * 8);
- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 2:
- addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
- break;
- case 4:
- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
- break;
- default:
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t value)
-{
- unsigned long flags, tval, addr, mask;
-
- if (devfn)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- spin_lock_irqsave(&ath724x_pci_lock, flags);
-
- switch (size) {
- case 1:
- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
- mask = 0xff000000 >> ((where % 4)*8);
- tval = reg_read(addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
- reg_write(addr, tval);
- break;
- case 2:
- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
- reg_write(addr, tval);
- break;
- case 4:
- reg_write((ATH724X_PCI_DEV_BASE + where), value);
- break;
- default:
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops ath724x_pci_ops = {
- .read = ath724x_pci_read,
- .write = ath724x_pci_write,
-};
-
-static struct resource ath724x_io_resource = {
- .name = "PCI IO space",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource ath724x_mem_resource = {
- .name = "PCI memory space",
- .start = ATH724X_PCI_MEM_BASE,
- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct pci_controller ath724x_pci_controller = {
- .pci_ops = &ath724x_pci_ops,
- .io_resource = &ath724x_io_resource,
- .mem_resource = &ath724x_mem_resource,
-};
-
-int __init ath724x_pcibios_init(void)
-{
- register_pci_controller(&ath724x_pci_controller);
-
- return PCIBIOS_SUCCESSFUL;
-}

266
target/linux/ar71xx/patches-3.2/107-MIPS-ath79-replace-ath724x-to-ar724x.patch
View File

@ -1,266 +0,0 @@
From 0cbee5634678ffbd10bee9e302d013392dd8289e Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 11:16:33 +0100
Subject: [PATCH 07/35] MIPS: ath79: replace ath724x to ar724x
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Replace the 'ath724x' to 'ar724x' in function, variable and
structure names to reflect the name of the real SoC.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: René Bolldorf <xsecute@googlemail.com>
v4: - add an Acked-by tag from René
- refreshed due to the changes in a previous patch
v3: - no changes
v2: - no changes
---
arch/mips/ath79/mach-ubnt-xm.c | 4 +-
arch/mips/ath79/pci.c | 6 ++--
arch/mips/ath79/pci.h | 10 +++---
arch/mips/include/asm/mach-ath79/pci.h | 4 +-
arch/mips/pci/pci-ar724x.c | 62 ++++++++++++++++----------------
5 files changed, 43 insertions(+), 43 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -84,7 +84,7 @@ static struct ath79_spi_platform_data ub
#ifdef CONFIG_PCI
static struct ath9k_platform_data ubnt_xm_eeprom_data;
-static struct ath724x_pci_data ubnt_xm_pci_data[] = {
+static struct ar724x_pci_data ubnt_xm_pci_data[] = {
{
.irq = UBNT_XM_PCI_IRQ,
.pdata = &ubnt_xm_eeprom_data,
@@ -108,7 +108,7 @@ static void __init ubnt_xm_init(void)
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
- ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
#endif /* CONFIG_PCI */
ath79_register_pci();
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -13,10 +13,10 @@
#include <asm/mach-ath79/pci.h>
#include "pci.h"
-static struct ath724x_pci_data *pci_data;
+static struct ar724x_pci_data *pci_data;
static int pci_data_size;
-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
{
pci_data = data;
pci_data_size = size;
@@ -50,7 +50,7 @@ int pcibios_plat_dev_init(struct pci_dev
int __init ath79_register_pci(void)
{
if (soc_is_ar724x())
- return ath724x_pcibios_init();
+ return ar724x_pcibios_init();
return -ENODEV;
}
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -8,15 +8,15 @@
* by the Free Software Foundation.
*/
-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
-#define __ASM_MACH_ATH79_PCI_ATH724X_H
+#ifndef _ATH79_PCI_H
+#define _ATH79_PCI_H
-struct ath724x_pci_data {
+struct ar724x_pci_data {
int irq;
void *pdata;
};
-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
#ifdef CONFIG_PCI
int ath79_register_pci(void);
@@ -24,4 +24,4 @@ int ath79_register_pci(void);
static inline int ath79_register_pci(void) { return 0; }
#endif
-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+#endif /* _ATH79_PCI_H */
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -12,9 +12,9 @@
#define __ASM_MACH_ATH79_PCI_H
#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
-int ath724x_pcibios_init(void);
+int ar724x_pcibios_init(void);
#else
-static inline int ath724x_pcibios_init(void) { return 0 };
+static inline int ar724x_pcibios_init(void) { return 0 };
#endif
#endif /* __ASM_MACH_ATH79_PCI_H */
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -14,13 +14,13 @@
#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-#define ATH724X_PCI_DEV_BASE 0x14000000
-#define ATH724X_PCI_MEM_BASE 0x10000000
-#define ATH724X_PCI_MEM_SIZE 0x08000000
+#define AR724X_PCI_DEV_BASE 0x14000000
+#define AR724X_PCI_MEM_BASE 0x10000000
+#define AR724X_PCI_MEM_SIZE 0x08000000
-static DEFINE_SPINLOCK(ath724x_pci_lock);
+static DEFINE_SPINLOCK(ar724x_pci_lock);
-static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
unsigned long flags, addr, tval, mask;
@@ -31,38 +31,38 @@ static int ath724x_pci_read(struct pci_b
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
- spin_lock_irqsave(&ath724x_pci_lock, flags);
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
switch (size) {
case 1:
addr = where & ~3;
mask = 0xff000000 >> ((where % 4) * 8);
- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
tval = tval & ~mask;
*value = (tval >> ((4 - (where % 4))*8));
break;
case 2:
addr = where & ~3;
mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = reg_read(AR724X_PCI_DEV_BASE + addr);
tval = tval & ~mask;
*value = (tval >> ((4 - (where % 4))*8));
break;
case 4:
- *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+ *value = reg_read(AR724X_PCI_DEV_BASE + where);
break;
default:
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
return PCIBIOS_SUCCESSFUL;
}
-static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t value)
{
unsigned long flags, tval, addr, mask;
@@ -73,11 +73,11 @@ static int ath724x_pci_write(struct pci_
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
- spin_lock_irqsave(&ath724x_pci_lock, flags);
+ spin_lock_irqsave(&ar724x_pci_lock, flags);
switch (size) {
case 1:
- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
mask = 0xff000000 >> ((where % 4)*8);
tval = reg_read(addr);
tval = tval & ~mask;
@@ -85,7 +85,7 @@ static int ath724x_pci_write(struct pci_
reg_write(addr, tval);
break;
case 2:
- addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ addr = (AR724X_PCI_DEV_BASE + where) & ~3;
mask = 0xffff0000 >> ((where % 4)*8);
tval = reg_read(addr);
tval = tval & ~mask;
@@ -93,47 +93,47 @@ static int ath724x_pci_write(struct pci_
reg_write(addr, tval);
break;
case 4:
- reg_write((ATH724X_PCI_DEV_BASE + where), value);
+ reg_write((AR724X_PCI_DEV_BASE + where), value);
break;
default:
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
- spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+ spin_unlock_irqrestore(&ar724x_pci_lock, flags);
return PCIBIOS_SUCCESSFUL;
}
-static struct pci_ops ath724x_pci_ops = {
- .read = ath724x_pci_read,
- .write = ath724x_pci_write,
+static struct pci_ops ar724x_pci_ops = {
+ .read = ar724x_pci_read,
+ .write = ar724x_pci_write,
};
-static struct resource ath724x_io_resource = {
+static struct resource ar724x_io_resource = {
.name = "PCI IO space",
.start = 0,
.end = 0,
.flags = IORESOURCE_IO,
};
-static struct resource ath724x_mem_resource = {
+static struct resource ar724x_mem_resource = {
.name = "PCI memory space",
- .start = ATH724X_PCI_MEM_BASE,
- .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+ .start = AR724X_PCI_MEM_BASE,
+ .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM,
};
-static struct pci_controller ath724x_pci_controller = {
- .pci_ops = &ath724x_pci_ops,
- .io_resource = &ath724x_io_resource,
- .mem_resource = &ath724x_mem_resource,
+static struct pci_controller ar724x_pci_controller = {
+ .pci_ops = &ar724x_pci_ops,
+ .io_resource = &ar724x_io_resource,
+ .mem_resource = &ar724x_mem_resource,
};
-int __init ath724x_pcibios_init(void)
+int __init ar724x_pcibios_init(void)
{
- register_pci_controller(&ath724x_pci_controller);
+ register_pci_controller(&ar724x_pci_controller);
return PCIBIOS_SUCCESSFUL;
}

132
target/linux/ar71xx/patches-3.2/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch
View File

@ -1,132 +0,0 @@
From db464f2ad82c03f847d8eabbb8251b5c567e6720 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 11:52:41 +0100
Subject: [PATCH 08/35] MIPS: ath79: use io-accessor macros in pci-ar724x.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: René Bolldorf <xsecute@googlemail.com>
v4: - add an Acked-by tag from René
v3: - no changes
v2: - no changes
---
arch/mips/pci/pci-ar724x.c | 38 ++++++++++++++++++++++++--------------
1 files changed, 24 insertions(+), 14 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -11,19 +11,19 @@
#include <linux/pci.h>
#include <asm/mach-ath79/pci.h>
-#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
-#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
-
-#define AR724X_PCI_DEV_BASE 0x14000000
+#define AR724X_PCI_CFG_BASE 0x14000000
+#define AR724X_PCI_CFG_SIZE 0x1000
#define AR724X_PCI_MEM_BASE 0x10000000
#define AR724X_PCI_MEM_SIZE 0x08000000
static DEFINE_SPINLOCK(ar724x_pci_lock);
+static void __iomem *ar724x_pci_devcfg_base;
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
unsigned long flags, addr, tval, mask;
+ void __iomem *base;
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -31,25 +31,27 @@ static int ar724x_pci_read(struct pci_bu
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
+ base = ar724x_pci_devcfg_base;
+
spin_lock_irqsave(&ar724x_pci_lock, flags);
switch (size) {
case 1:
addr = where & ~3;
mask = 0xff000000 >> ((where % 4) * 8);
- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+ tval = __raw_readl(base + addr);
tval = tval & ~mask;
*value = (tval >> ((4 - (where % 4))*8));
break;
case 2:
addr = where & ~3;
mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(AR724X_PCI_DEV_BASE + addr);
+ tval = __raw_readl(base + addr);
tval = tval & ~mask;
*value = (tval >> ((4 - (where % 4))*8));
break;
case 4:
- *value = reg_read(AR724X_PCI_DEV_BASE + where);
+ *value = __raw_readl(base + where);
break;
default:
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
@@ -66,6 +68,7 @@ static int ar724x_pci_write(struct pci_b
int size, uint32_t value)
{
unsigned long flags, tval, addr, mask;
+ void __iomem *base;
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -73,27 +76,29 @@ static int ar724x_pci_write(struct pci_b
if (where & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
+ base = ar724x_pci_devcfg_base;
+
spin_lock_irqsave(&ar724x_pci_lock, flags);
switch (size) {
case 1:
- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+ addr = where & ~3;
mask = 0xff000000 >> ((where % 4)*8);
- tval = reg_read(addr);
+ tval = __raw_readl(base + addr);
tval = tval & ~mask;
tval |= (value << ((4 - (where % 4))*8)) & mask;
- reg_write(addr, tval);
+ __raw_writel(tval, base + addr);
break;
case 2:
- addr = (AR724X_PCI_DEV_BASE + where) & ~3;
+ addr = where & ~3;
mask = 0xffff0000 >> ((where % 4)*8);
- tval = reg_read(addr);
+ tval = __raw_readl(base + addr);
tval = tval & ~mask;
tval |= (value << ((4 - (where % 4))*8)) & mask;
- reg_write(addr, tval);
+ __raw_writel(tval, base + addr);
break;
case 4:
- reg_write((AR724X_PCI_DEV_BASE + where), value);
+ __raw_writel(value, (base + where));
break;
default:
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
@@ -133,6 +138,11 @@ static struct pci_controller ar724x_pci_
int __init ar724x_pcibios_init(void)
{
+ ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CFG_SIZE);
+ if (ar724x_pci_devcfg_base == NULL)
+ return -ENOMEM;
+
register_pci_controller(&ar724x_pci_controller);
return PCIBIOS_SUCCESSFUL;

37
target/linux/ar71xx/patches-3.2/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch
View File

@ -1,37 +0,0 @@
From 744ffdd4e90cd6671f46eadf9d7cf55b07618d73 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 21:37:17 +0100
Subject: [PATCH 09/35] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c
The alignment of the 'where' parameters are checked
in the core PCI code already.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
---
arch/mips/pci/pci-ar724x.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -28,9 +28,6 @@ static int ar724x_pci_read(struct pci_bu
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
base = ar724x_pci_devcfg_base;
spin_lock_irqsave(&ar724x_pci_lock, flags);
@@ -73,9 +70,6 @@ static int ar724x_pci_write(struct pci_b
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
- if (where & (size - 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
base = ar724x_pci_devcfg_base;
spin_lock_irqsave(&ar724x_pci_lock, flags);

219
target/linux/ar71xx/patches-3.2/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch
View File

@ -1,219 +0,0 @@
From 2e535c334018d58b0bf6df583486abda5bfb2003 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 18 Nov 2011 22:25:30 +0100
Subject: [PATCH 10/35] MIPS: ath79: fix broken ar724x_pci_{read,write} functions
The current ar724x_pci_{read,write} functions are
broken. Due to that, pci_read_config_byte returns
with bogus values, and pci_write_config_{byte,word}
unconditionally clears the accessed PCI configuration
registers instead of changing the value of them.
The patch fixes the broken functions, thus the PCI
configuration space can be accessed correctly.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
Output of 'lspci -vv' without the patch:
00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: Atheros Communications Inc. Device a091
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Output of 'lspci -vv' with the patch:
00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: Atheros Communications Inc. Device a091
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170 v1] Power Budgeting <?>
---
arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++----------------------
1 files changed, 26 insertions(+), 26 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
- unsigned long flags, addr, tval, mask;
+ unsigned long flags;
void __iomem *base;
+ u32 data;
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu
base = ar724x_pci_devcfg_base;
spin_lock_irqsave(&ar724x_pci_lock, flags);
+ data = __raw_readl(base + (where & ~3));
switch (size) {
case 1:
- addr = where & ~3;
- mask = 0xff000000 >> ((where % 4) * 8);
- tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
+ if (where & 1)
+ data >>= 8;
+ if (where & 2)
+ data >>= 16;
+ data &= 0xff;
break;
case 2:
- addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
- tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- *value = (tval >> ((4 - (where % 4))*8));
+ if (where & 2)
+ data >>= 16;
+ data &= 0xffff;
break;
case 4:
- *value = __raw_readl(base + where);
break;
default:
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu
}
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+ *value = data;
return PCIBIOS_SUCCESSFUL;
}
@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu
static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t value)
{
- unsigned long flags, tval, addr, mask;
+ unsigned long flags;
void __iomem *base;
+ u32 data;
+ int s;
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b
base = ar724x_pci_devcfg_base;
spin_lock_irqsave(&ar724x_pci_lock, flags);
+ data = __raw_readl(base + (where & ~3));
switch (size) {
case 1:
- addr = where & ~3;
- mask = 0xff000000 >> ((where % 4)*8);
- tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
- __raw_writel(tval, base + addr);
+ s = ((where & 3) * 8);
+ data &= ~(0xff << s);
+ data |= ((value & 0xff) << s);
break;
case 2:
- addr = where & ~3;
- mask = 0xffff0000 >> ((where % 4)*8);
- tval = __raw_readl(base + addr);
- tval = tval & ~mask;
- tval |= (value << ((4 - (where % 4))*8)) & mask;
- __raw_writel(tval, base + addr);
+ s = ((where & 2) * 8);
+ data &= ~(0xffff << s);
+ data |= ((value & 0xffff) << s);
break;
case 4:
- __raw_writel(value, (base + where));
+ data = value;
break;
default:
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b
return PCIBIOS_BAD_REGISTER_NUMBER;
}
+ __raw_writel(data, base + (where & ~3));
+ /* flush write */
+ __raw_readl(base + (where & ~3));
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
return PCIBIOS_SUCCESSFUL;

134
target/linux/ar71xx/patches-3.2/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch
View File

@ -1,134 +0,0 @@
From b2ee3bd8706521c9bbf43405c767010927c101e5 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 21 Nov 2011 17:57:51 +0100
Subject: [PATCH 11/35] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs
The PCI controller of the AR724X SoCs has a hardware
bag. If the BAR0 register of the PCI device is set to
the proper base address, the memory address space of
the device is not accessible.
When the device driver tries to access the memory
address space of the PCI device, it leads to data
bus error, similiar to this:
Data bus error, epc == 801f69a0, ra == 801f698c
Oops[#1]:
Cpu 0
$ 0 : 00000000 00000061 deadbeef 000000ff
$ 4 : 00000000 000000ff 00000014 00000000
$ 8 : ff000000 fffffffc 00000000 00000000
$12 : 000001f5 00000006 00000000 6e637920
$16 : 81ca4000 81ca0260 81ca4000 804d70f0
$20 : fffffff4 0000002b 803ad4c4 00000000
$24 : 00000003 00000000
$28 : 81c20000 81c21c60 00000000 801f698c
Hi : 00000000
Lo : 00000000
epc : 801f69a0 ath9k_hw_init+0xd0/0xa70
Not tainted
ra : 801f698c ath9k_hw_init+0xbc/0xa70
Status: 1000c103 KERNEL EXL IE
Cause : 1080001c
PrId : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
Stack : 00000000 00000000 00000000 00000000 81c21c78 81ca0260 00000000 804d70f0
81ca0260 81c21cc0 81ca0e80 81ca0260 81ca4000 804d70f0 fffffff4 0000002b
803ad4c4 00000000 00000000 801e3ae8 81c9d080 81ca0e80 b0000000 800b9b9c
00000008 81c9d000 8031aeb0 802d38a0 00000000 81c14c00 81c14c60 00000000
81ca0e80 81ca0260 b0000000 801f08a4 81c9c820 81c21d48 81c9c820 80144320
...
Call Trace:
[<801f69a0>] ath9k_hw_init+0xd0/0xa70
[<801e3ae8>] ath9k_init_device+0x174/0x680
[<801f08a4>] ath_pci_probe+0x27c/0x380
[<8019e490>] pci_device_probe+0x74/0x9c
[<801bfadc>] driver_probe_device+0x9c/0x1b4
[<801bfcb0>] __driver_attach+0xbc/0xc4
[<801bea0c>] bus_for_each_dev+0x5c/0x98
[<801bf394>] bus_add_driver+0x1d0/0x2a4
[<801c0364>] driver_register+0x8c/0x16c
[<8019e72c>] __pci_register_driver+0x4c/0xe4
[<803d3d40>] ath9k_init+0x3c/0x88
[<80060930>] do_one_initcall+0x3c/0x1cc
[<803c297c>] kernel_init+0xa4/0x138
[<80063c04>] kernel_thread_helper+0x10/0x18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - apply the workaround on AR7240 only
- remove unrelated defines
---
arch/mips/pci/pci-ar724x.c | 36 +++++++++++++++++++++++++++++++++++-
1 files changed, 35 insertions(+), 1 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -9,6 +9,7 @@
*/
#include <linux/pci.h>
+#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/pci.h>
#define AR724X_PCI_CFG_BASE 0x14000000
@@ -16,9 +17,14 @@
#define AR724X_PCI_MEM_BASE 0x10000000
#define AR724X_PCI_MEM_SIZE 0x08000000
+#define AR7240_BAR0_WAR_VALUE 0xffff
+
static DEFINE_SPINLOCK(ar724x_pci_lock);
static void __iomem *ar724x_pci_devcfg_base;
+static u32 ar724x_pci_bar0_value;
+static bool ar724x_pci_bar0_is_cached;
+
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
@@ -56,7 +62,14 @@ static int ar724x_pci_read(struct pci_bu
}
spin_unlock_irqrestore(&ar724x_pci_lock, flags);
- *value = data;
+
+ if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
+ ar724x_pci_bar0_is_cached) {
+ /* use the cached value */
+ *value = ar724x_pci_bar0_value;
+ } else {
+ *value = data;
+ }
return PCIBIOS_SUCCESSFUL;
}
@@ -72,6 +85,27 @@ static int ar724x_pci_write(struct pci_b
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
+ if (soc_is_ar7240() && where == PCI_BASE_ADDRESS_0 && size == 4) {
+ if (value != 0xffffffff) {
+ /*
+ * WAR for a hw issue. If the BAR0 register of the
+ * device is set to the proper base address, the
+ * memory space of the device is not accessible.
+ *
+ * Cache the intended value so it can be read back,
+ * and write a SoC specific constant value to the
+ * BAR0 register in order to make the device memory
+ * accessible.
+ */
+ ar724x_pci_bar0_is_cached = true;
+ ar724x_pci_bar0_value = value;
+
+ value = AR7240_BAR0_WAR_VALUE;
+ } else {
+ ar724x_pci_bar0_is_cached = false;
+ }
+ }
+
base = ar724x_pci_devcfg_base;
spin_lock_irqsave(&ar724x_pci_lock, flags);

75
target/linux/ar71xx/patches-3.2/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch
View File

@ -1,75 +0,0 @@
From cfb725275ea25857e8f0e3bf358fff7c84cc787c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 22 Nov 2011 13:59:39 +0100
Subject: [PATCH 12/35] MIPS: ath79: fix a wrong IRQ number
The Ubiquiti XM board setup code uses an invalid
IRQ number, because it if above of NR_IRQS. This
leads to failed 'request_irq' calls:
ath9k 0000:00:00.0: request_irq failed
ath9k: probe of 0000:00:00.0 failed with error -22
Preserve some IRQ numbers for the built-in IRQ
controller of PCI host controllers in the
AR71XX/AR724X SoCs, and use the correct IRQ
number in the board setup code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
The IRQ controller code is also missing, that will be
added in a separate patch.
---
arch/mips/ath79/mach-ubnt-xm.c | 5 +++--
arch/mips/include/asm/mach-ath79/irq.h | 6 +++++-
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -17,6 +17,8 @@
#include <linux/ath9k_platform.h>
#endif /* CONFIG_PCI */
+#include <asm/mach-ath79/irq.h>
+
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
@@ -33,7 +35,6 @@
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-#define UBNT_XM_PCI_IRQ 48
#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_x
static struct ar724x_pci_data ubnt_xm_pci_data[] = {
{
- .irq = UBNT_XM_PCI_IRQ,
+ .irq = ATH79_PCI_IRQ(0),
.pdata = &ubnt_xm_eeprom_data,
},
};
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,11 +10,15 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 40
+#define NR_IRQS 46
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
+#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
+#define ATH79_PCI_IRQ_COUNT 6
+#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
+
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)

213
target/linux/ar71xx/patches-3.2/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch
View File

@ -1,213 +0,0 @@
From a4fbc2dec67a5d760e25e3c3a6c392191a5405c6 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 22 Nov 2011 14:11:19 +0100
Subject: [PATCH 13/35] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs
The PCI Host Controller of the AR724x SoC has a
built-in IRQ controller. The current code does
not supports that, so the IRQ lines wired to this
controller are not usable. This leads to failed
'request_irq' calls:
ath9k 0000:00:00.0: request_irq failed
ath9k: probe of 0000:00:00.0 failed with error -89
This patch adds support for the IRQ controller
in order to make PCI IRQs work.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - move the interrupt controller related defines from
the workaround patch
---
arch/mips/ath79/pci.c | 3 +-
arch/mips/include/asm/mach-ath79/pci.h | 4 +-
arch/mips/pci/pci-ar724x.c | 118 +++++++++++++++++++++++++++++++-
3 files changed, 120 insertions(+), 5 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -10,6 +10,7 @@
#include <linux/pci.h>
#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/pci.h>
#include "pci.h"
@@ -50,7 +51,7 @@ int pcibios_plat_dev_init(struct pci_dev
int __init ath79_register_pci(void)
{
if (soc_is_ar724x())
- return ar724x_pcibios_init();
+ return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
return -ENODEV;
}
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -12,9 +12,9 @@
#define __ASM_MACH_ATH79_PCI_H
#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
-int ar724x_pcibios_init(void);
+int ar724x_pcibios_init(int irq);
#else
-static inline int ar724x_pcibios_init(void) { return 0 };
+static inline int ar724x_pcibios_init(int irq) { return 0 };
#endif
#endif /* __ASM_MACH_ATH79_PCI_H */
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -8,19 +8,32 @@
* by the Free Software Foundation.
*/
+#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/pci.h>
#define AR724X_PCI_CFG_BASE 0x14000000
#define AR724X_PCI_CFG_SIZE 0x1000
+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
+#define AR724X_PCI_CTRL_SIZE 0x100
+
#define AR724X_PCI_MEM_BASE 0x10000000
#define AR724X_PCI_MEM_SIZE 0x08000000
+#define AR724X_PCI_REG_INT_STATUS 0x4c
+#define AR724X_PCI_REG_INT_MASK 0x50
+
+#define AR724X_PCI_INT_DEV0 BIT(14)
+
+#define AR724X_PCI_IRQ_COUNT 1
+
#define AR7240_BAR0_WAR_VALUE 0xffff
static DEFINE_SPINLOCK(ar724x_pci_lock);
static void __iomem *ar724x_pci_devcfg_base;
+static void __iomem *ar724x_pci_ctrl_base;
static u32 ar724x_pci_bar0_value;
static bool ar724x_pci_bar0_is_cached;
@@ -164,14 +177,115 @@ static struct pci_controller ar724x_pci_
.mem_resource = &ar724x_mem_resource,
};
-int __init ar724x_pcibios_init(void)
+static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *base;
+ u32 pending;
+
+ base = ar724x_pci_ctrl_base;
+
+ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+
+ if (pending & AR724X_PCI_INT_DEV0)
+ generic_handle_irq(ATH79_PCI_IRQ(0));
+
+ else
+ spurious_interrupt();
+}
+
+static void ar724x_pci_irq_unmask(struct irq_data *d)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ar724x_pci_ctrl_base;
+
+ switch (d->irq) {
+ case ATH79_PCI_IRQ(0):
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+ /* flush write */
+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ }
+}
+
+static void ar724x_pci_irq_mask(struct irq_data *d)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ar724x_pci_ctrl_base;
+
+ switch (d->irq) {
+ case ATH79_PCI_IRQ(0):
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+
+ /* flush write */
+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+
+ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_STATUS);
+
+ /* flush write */
+ __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
+ }
+}
+
+static struct irq_chip ar724x_pci_irq_chip = {
+ .name = "AR724X PCI ",
+ .irq_mask = ar724x_pci_irq_mask,
+ .irq_unmask = ar724x_pci_irq_unmask,
+ .irq_mask_ack = ar724x_pci_irq_mask,
+};
+
+static void __init ar724x_pci_irq_init(int irq)
+{
+ void __iomem *base;
+ int i;
+
+ base = ar724x_pci_ctrl_base;
+
+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+
+ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
+
+ for (i = ATH79_PCI_IRQ_BASE;
+ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
+ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+ handle_level_irq);
+
+ irq_set_chained_handler(irq, ar724x_pci_irq_handler);
+}
+
+int __init ar724x_pcibios_init(int irq)
{
+ int ret;
+
+ ret = -ENOMEM;
+
ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
AR724X_PCI_CFG_SIZE);
if (ar724x_pci_devcfg_base == NULL)
- return -ENOMEM;
+ goto err;
+ ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
+ AR724X_PCI_CTRL_SIZE);
+ if (ar724x_pci_ctrl_base == NULL)
+ goto err_unmap_devcfg;
+
+ ar724x_pci_irq_init(irq);
register_pci_controller(&ar724x_pci_controller);
return PCIBIOS_SUCCESSFUL;
+
+err_unmap_devcfg:
+ iounmap(ar724x_pci_devcfg_base);
+err:
+ return ret;
}

63
target/linux/ar71xx/patches-3.2/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch
View File

@ -1,63 +0,0 @@
From adeefb0860e92f44c7d66d5fccdb217fccfb8a81 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 20 Nov 2011 10:19:08 +0100
Subject: [PATCH 14/35] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c
Remove a superfluous ifdef around an include. Also
reorganize the board setup code a bit, so another
ifdef can be removed.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
---
arch/mips/ath79/mach-ubnt-xm.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -12,10 +12,7 @@
#include <linux/init.h>
#include <linux/pci.h>
-
-#ifdef CONFIG_PCI
#include <linux/ath9k_platform.h>
-#endif /* CONFIG_PCI */
#include <asm/mach-ath79/irq.h>
@@ -91,6 +88,17 @@ static struct ar724x_pci_data ubnt_xm_pc
.pdata = &ubnt_xm_eeprom_data,
},
};
+
+static void __init ubnt_xm_pci_init(void)
+{
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+ ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ ath79_register_pci();
+}
+#else
+static inline void ubnt_xm_pci_init(void) {}
#endif /* CONFIG_PCI */
static void __init ubnt_xm_init(void)
@@ -105,14 +113,7 @@ static void __init ubnt_xm_init(void)
ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
ARRAY_SIZE(ubnt_xm_spi_info));
-#ifdef CONFIG_PCI
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
-#endif /* CONFIG_PCI */
-
- ath79_register_pci();
+ ubnt_xm_pci_init();
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,

143
target/linux/ar71xx/patches-3.2/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch
View File

@ -1,143 +0,0 @@
From 83d74abc7d549f5d6292b0474be080983239c0bd Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 20 Nov 2011 10:29:36 +0100
Subject: [PATCH 15/35] MIPS: ath79: allow to use board specific pci_plat_dev_init functions
Th current implementation causes NULL pointer dereference
if 'pci_data' is not set:
pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI
address [0x10000000-0x1000ffff])
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4
Oops[#1]:
Cpu 0
$ 0 : 00000000 80420000 00000000 00000000
$ 4 : 00000000 00000000 00000001 00000001
$ 8 : 00000001 0000032c 81c54700 00000001
$12 : 0000032d 0000000f 00000000 ffffffff
$16 : 81c14c00 00000001 802dac74 80195f98
$20 : 802ea050 00000000 00000000 00000000
$24 : 00000003 800617f0
$28 : 81c20000 81c21e70 00000000 802e78a4
Hi : 00000000
Lo : 4190ab00
epc : 802daca0 0x802daca0
Not tainted
ra : 802e78a4 0x802e78a4
Status: 1000c003 KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000)
Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000
802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290
80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000
00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000
00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000
This can be avoided by calling the 'ar724x_pci_add_data'
function from the board specific setup code. However it
makes no sense to use that function for every board,
especially when the board does not needs to set the
platform_data field of any PCI device.
The patch allows the board setup code to specify a board
specific function if that is required.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
The pci_irq_map function can throw another NULL pointer
dereference, that will be fixed in a subsequent patch.
---
arch/mips/ath79/mach-ubnt-xm.c | 13 ++++++++++++-
arch/mips/ath79/pci.c | 14 ++++++++------
arch/mips/ath79/pci.h | 4 +++-
3 files changed, 23 insertions(+), 8 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -85,16 +85,27 @@ static struct ath9k_platform_data ubnt_x
static struct ar724x_pci_data ubnt_xm_pci_data[] = {
{
.irq = ATH79_PCI_IRQ(0),
- .pdata = &ubnt_xm_eeprom_data,
},
};
+static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ dev->dev.platform_data = &ubnt_xm_eeprom_data;
+ break;
+ }
+
+ return 0;
+}
+
static void __init ubnt_xm_pci_init(void)
{
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+ ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
ath79_register_pci();
}
#else
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -14,6 +14,7 @@
#include <asm/mach-ath79/pci.h>
#include "pci.h"
+static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
static struct ar724x_pci_data *pci_data;
static int pci_data_size;
@@ -38,14 +39,15 @@ int __init pcibios_map_irq(const struct
int pcibios_plat_dev_init(struct pci_dev *dev)
{
- unsigned int devfn = dev->devfn;
-
- if (devfn > pci_data_size - 1)
- return PCIBIOS_DEVICE_NOT_FOUND;
+ if (ath79_pci_plat_dev_init)
+ return ath79_pci_plat_dev_init(dev);
- dev->dev.platform_data = pci_data[devfn].pdata;
+ return 0;
+}
- return PCIBIOS_SUCCESSFUL;
+void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
+{
+ ath79_pci_plat_dev_init = func;
}
int __init ath79_register_pci(void)
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -13,14 +13,16 @@
struct ar724x_pci_data {
int irq;
- void *pdata;
};
void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
#ifdef CONFIG_PCI
+void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
int ath79_register_pci(void);
#else
+static inline void
+ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
static inline int ath79_register_pci(void) { return 0; }
#endif

435
target/linux/ar71xx/patches-3.2/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch
View File

@ -1,435 +0,0 @@
From 9f6d46372cf2a493eaeeffbefe0a796379f838fa Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 22 Nov 2011 22:54:32 +0100
Subject: [PATCH 16/35] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs
The Atheros AR71XX SoCs have a built-in PCI Host Controller.
This patch adds a driver for that, and modifies the relevant
files in order to allow to register the PCI controller from
board specific setup.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
v2: - add missing pci-ar71xx.c
---
arch/mips/ath79/Kconfig | 1 +
arch/mips/include/asm/mach-ath79/pci.h | 6 +
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-ar71xx.c | 375 ++++++++++++++++++++++++++++++++
4 files changed, 383 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/pci/pci-ar71xx.c
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -52,6 +52,7 @@ endmenu
config SOC_AR71XX
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select HW_HAS_PCI
def_bool n
config SOC_AR724X
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -11,6 +11,12 @@
#ifndef __ASM_MACH_ATH79_PCI_H
#define __ASM_MACH_ATH79_PCI_H
+#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
+int ar71xx_pcibios_init(void);
+#else
+static inline int ar71xx_pcibios_init(void) { return 0 };
+#endif
+
#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
int ar724x_pcibios_init(int irq);
#else
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
#
--- /dev/null
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -0,0 +1,375 @@
+/*
+ * Atheros AR71xx PCI host controller driver
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/resource.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
+
+#define AR71XX_PCI_MEM_BASE 0x10000000
+#define AR71XX_PCI_MEM_SIZE 0x08000000
+
+#define AR71XX_PCI_WIN0_OFFS 0x10000000
+#define AR71XX_PCI_WIN1_OFFS 0x11000000
+#define AR71XX_PCI_WIN2_OFFS 0x12000000
+#define AR71XX_PCI_WIN3_OFFS 0x13000000
+#define AR71XX_PCI_WIN4_OFFS 0x14000000
+#define AR71XX_PCI_WIN5_OFFS 0x15000000
+#define AR71XX_PCI_WIN6_OFFS 0x16000000
+#define AR71XX_PCI_WIN7_OFFS 0x07000000
+
+#define AR71XX_PCI_CFG_BASE \
+ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
+#define AR71XX_PCI_CFG_SIZE 0x100
+
+#define AR71XX_PCI_REG_CRP_AD_CBE 0x00
+#define AR71XX_PCI_REG_CRP_WRDATA 0x04
+#define AR71XX_PCI_REG_CRP_RDDATA 0x08
+#define AR71XX_PCI_REG_CFG_AD 0x0c
+#define AR71XX_PCI_REG_CFG_CBE 0x10
+#define AR71XX_PCI_REG_CFG_WRDATA 0x14
+#define AR71XX_PCI_REG_CFG_RDDATA 0x18
+#define AR71XX_PCI_REG_PCI_ERR 0x1c
+#define AR71XX_PCI_REG_PCI_ERR_ADDR 0x20
+#define AR71XX_PCI_REG_AHB_ERR 0x24
+#define AR71XX_PCI_REG_AHB_ERR_ADDR 0x28
+
+#define AR71XX_PCI_CRP_CMD_WRITE 0x00010000
+#define AR71XX_PCI_CRP_CMD_READ 0x00000000
+#define AR71XX_PCI_CFG_CMD_READ 0x0000000a
+#define AR71XX_PCI_CFG_CMD_WRITE 0x0000000b
+
+#define AR71XX_PCI_INT_CORE BIT(4)
+#define AR71XX_PCI_INT_DEV2 BIT(2)
+#define AR71XX_PCI_INT_DEV1 BIT(1)
+#define AR71XX_PCI_INT_DEV0 BIT(0)
+
+#define AR71XX_PCI_IRQ_COUNT 5
+
+static DEFINE_SPINLOCK(ar71xx_pci_lock);
+static void __iomem *ar71xx_pcicfg_base;
+
+/* Byte lane enable bits */
+static const u8 ar71xx_pci_ble_table[4][4] = {
+ {0x0, 0xf, 0xf, 0xf},
+ {0xe, 0xd, 0xb, 0x7},
+ {0xc, 0xf, 0x3, 0xf},
+ {0xf, 0xf, 0xf, 0xf},
+};
+
+static const u32 ar71xx_pci_read_mask[8] = {
+ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
+};
+
+static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
+{
+ u32 t;
+
+ t = ar71xx_pci_ble_table[size & 3][where & 3];
+ BUG_ON(t == 0xf);
+ t <<= (local) ? 20 : 4;
+
+ return t;
+}
+
+static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ u32 ret;
+
+ if (!bus->number) {
+ /* type 0 */
+ ret = (1 << PCI_SLOT(devfn)) | (PCI_FUNC(devfn) << 8) |
+ (where & ~3);
+ } else {
+ /* type 1 */
+ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) |
+ (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
+ }
+
+ return ret;
+}
+
+static int ar71xx_pci_check_error(int quiet)
+{
+ void __iomem *base = ar71xx_pcicfg_base;
+ u32 pci_err;
+ u32 ahb_err;
+
+ pci_err = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR) & 3;
+ if (pci_err) {
+ if (!quiet) {
+ u32 addr;
+
+ addr = __raw_readl(base + AR71XX_PCI_REG_PCI_ERR_ADDR);
+ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
+ "PCI", pci_err, addr);
+ }
+
+ /* clear PCI error status */
+ __raw_writel(pci_err, base + AR71XX_PCI_REG_PCI_ERR);
+ }
+
+ ahb_err = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR) & 1;
+ if (ahb_err) {
+ if (!quiet) {
+ u32 addr;
+
+ addr = __raw_readl(base + AR71XX_PCI_REG_AHB_ERR_ADDR);
+ pr_crit("ar71xx: %s bus error %d at addr 0x%x\n",
+ "AHB", ahb_err, addr);
+ }
+
+ /* clear AHB error status */
+ __raw_writel(ahb_err, base + AR71XX_PCI_REG_AHB_ERR);
+ }
+
+ return !!(ahb_err | pci_err);
+}
+
+static inline void ar71xx_pci_local_write(int where, int size, u32 value)
+{
+ void __iomem *base = ar71xx_pcicfg_base;
+ u32 ad_cbe;
+
+ value = value << (8 * (where & 3));
+
+ ad_cbe = AR71XX_PCI_CRP_CMD_WRITE | (where & ~3);
+ ad_cbe |= ar71xx_pci_get_ble(where, size, 1);
+
+ __raw_writel(ad_cbe, base + AR71XX_PCI_REG_CRP_AD_CBE);
+ __raw_writel(value, base + AR71XX_PCI_REG_CRP_WRDATA);
+}
+
+static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
+ unsigned int devfn,
+ int where, int size, u32 cmd)
+{
+ void __iomem *base = ar71xx_pcicfg_base;
+ u32 addr;
+
+ addr = ar71xx_pci_bus_addr(bus, devfn, where);
+
+ __raw_writel(addr, base + AR71XX_PCI_REG_CFG_AD);
+ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
+ base + AR71XX_PCI_REG_CFG_CBE);
+
+ return ar71xx_pci_check_error(1);
+}
+
+static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ void __iomem *base = ar71xx_pcicfg_base;
+ unsigned long flags;
+ u32 data;
+ int err;
+ int ret;
+
+ ret = PCIBIOS_SUCCESSFUL;
+ data = ~0;
+
+ spin_lock_irqsave(&ar71xx_pci_lock, flags);
+
+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+ AR71XX_PCI_CFG_CMD_READ);
+ if (err)
+ ret = PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
+
+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+
+ *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
+
+ return ret;
+}
+
+static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ void __iomem *base = ar71xx_pcicfg_base;
+ unsigned long flags;
+ int err;
+ int ret;
+
+ value = value << (8 * (where & 3));
+ ret = PCIBIOS_SUCCESSFUL;
+
+ spin_lock_irqsave(&ar71xx_pci_lock, flags);
+
+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+ AR71XX_PCI_CFG_CMD_WRITE);
+ if (err)
+ ret = PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
+
+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops ar71xx_pci_ops = {
+ .read = ar71xx_pci_read_config,
+ .write = ar71xx_pci_write_config,
+};
+
+static struct resource ar71xx_pci_io_resource = {
+ .name = "PCI IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource ar71xx_pci_mem_resource = {
+ .name = "PCI memory space",
+ .start = AR71XX_PCI_MEM_BASE,
+ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller ar71xx_pci_controller = {
+ .pci_ops = &ar71xx_pci_ops,
+ .mem_resource = &ar71xx_pci_mem_resource,
+ .io_resource = &ar71xx_pci_io_resource,
+};
+
+static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ void __iomem *base = ath79_reset_base;
+ u32 pending;
+
+ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+ if (pending & AR71XX_PCI_INT_DEV0)
+ generic_handle_irq(ATH79_PCI_IRQ(0));
+
+ else if (pending & AR71XX_PCI_INT_DEV1)
+ generic_handle_irq(ATH79_PCI_IRQ(1));
+
+ else if (pending & AR71XX_PCI_INT_DEV2)
+ generic_handle_irq(ATH79_PCI_IRQ(2));
+
+ else if (pending & AR71XX_PCI_INT_CORE)
+ generic_handle_irq(ATH79_PCI_IRQ(4));
+
+ else
+ spurious_interrupt();
+}
+
+static void ar71xx_pci_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
+ void __iomem *base = ath79_reset_base;
+ u32 t;
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+ /* flush write */
+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+}
+
+static void ar71xx_pci_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
+ void __iomem *base = ath79_reset_base;
+ u32 t;
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+ /* flush write */
+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+}
+
+static struct irq_chip ar71xx_pci_irq_chip = {
+ .name = "AR71XX PCI",
+ .irq_mask = ar71xx_pci_irq_mask,
+ .irq_unmask = ar71xx_pci_irq_unmask,
+ .irq_mask_ack = ar71xx_pci_irq_mask,
+};
+
+static __init void ar71xx_pci_irq_init(void)
+{
+ void __iomem *base = ath79_reset_base;
+ int i;
+
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+
+ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
+
+ for (i = ATH79_PCI_IRQ_BASE;
+ i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
+ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+ handle_level_irq);
+
+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
+}
+
+static __init void ar71xx_pci_reset(void)
+{
+ void __iomem *ddr_base = ath79_ddr_base;
+
+ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
+ mdelay(100);
+
+ ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
+ mdelay(100);
+
+ __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
+ __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
+ __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
+ __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
+ __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
+ __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
+ __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
+ __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
+
+ mdelay(100);
+}
+
+__init int ar71xx_pcibios_init(void)
+{
+ u32 t;
+
+ ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
+ if (ar71xx_pcicfg_base == NULL)
+ return -ENOMEM;
+
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
+
+ /* clear bus errors */
+ ar71xx_pci_check_error(1);
+
+ ar71xx_pci_irq_init();
+
+ register_pci_controller(&ar71xx_pci_controller);
+
+ return 0;
+}

164
target/linux/ar71xx/patches-3.2/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch
View File

@ -1,164 +0,0 @@
From 8a1a5852aa7f8cfc027b2b0bb51cbbac4309e144 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 20 Nov 2011 14:32:09 +0100
Subject: [PATCH 17/35] MIPS: ath79: allow to use SoC specific PCI IRQ maps
The PCI controllers in the AR71XX and in the
AR724X SoCs are different, and both of them
uses different IRQ wiring.
The patch modifies the 'pcibios_map_irq' function
in order to allow to use different IRQ maps for
the different SoCs. The patch also adds a function,
which lets the board setup code to override the
default IRQ map.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
---
arch/mips/ath79/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++---
arch/mips/ath79/pci.h | 9 ++++++
2 files changed, 77 insertions(+), 4 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -8,6 +8,7 @@
* by the Free Software Foundation.
*/
+#include <linux/init.h>
#include <linux/pci.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
@@ -15,9 +16,35 @@
#include "pci.h"
static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+static unsigned ath79_pci_nr_irqs __initdata;
static struct ar724x_pci_data *pci_data;
static int pci_data_size;
+static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ {
+ .slot = 17,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 18,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }
+};
+
+static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
+ {
+ .slot = 0,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }
+};
+
void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
{
pci_data = data;
@@ -26,13 +53,40 @@ void ar724x_pci_add_data(struct ar724x_p
int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
{
- unsigned int devfn = dev->devfn;
int irq = -1;
+ int i;
- if (devfn > pci_data_size - 1)
- return irq;
-
- irq = pci_data[devfn].irq;
+ if (ath79_pci_nr_irqs == 0 ||
+ ath79_pci_irq_map == NULL) {
+ if (soc_is_ar71xx()) {
+ ath79_pci_irq_map = ar71xx_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
+ } else if (soc_is_ar724x()) {
+ ath79_pci_irq_map = ar724x_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+ } else {
+ pr_crit("pci %s: invalid irq map\n",
+ pci_name((struct pci_dev *) dev));
+ return irq;
+ }
+ }
+
+ for (i = 0; i < ath79_pci_nr_irqs; i++) {
+ const struct ath79_pci_irq *entry;
+
+ entry = &ath79_pci_irq_map[i];
+ if (entry->slot == slot && entry->pin == pin) {
+ irq = entry->irq;
+ break;
+ }
+ }
+
+ if (irq < 0)
+ pr_crit("pci %s: no irq found for pin %u\n",
+ pci_name((struct pci_dev *) dev), pin);
+ else
+ pr_info("pci %s: using irq %d for pin %u\n",
+ pci_name((struct pci_dev *) dev), irq, pin);
return irq;
}
@@ -45,6 +99,13 @@ int pcibios_plat_dev_init(struct pci_dev
return 0;
}
+void __init ath79_pci_set_irq_map(unsigned nr_irqs,
+ const struct ath79_pci_irq *map)
+{
+ ath79_pci_nr_irqs = nr_irqs;
+ ath79_pci_irq_map = map;
+}
+
void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
{
ath79_pci_plat_dev_init = func;
@@ -52,6 +113,9 @@ void __init ath79_pci_set_plat_dev_init(
int __init ath79_register_pci(void)
{
+ if (soc_is_ar71xx())
+ return ar71xx_pcibios_init();
+
if (soc_is_ar724x())
return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -15,13 +15,22 @@ struct ar724x_pci_data {
int irq;
};
+struct ath79_pci_irq {
+ u8 slot;
+ u8 pin;
+ int irq;
+};
+
void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
#ifdef CONFIG_PCI
+void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
int ath79_register_pci(void);
#else
static inline void
+ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
+static inline void
ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
static inline int ath79_register_pci(void) { return 0; }
#endif

85
target/linux/ar71xx/patches-3.2/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch
View File

@ -1,85 +0,0 @@
From 0b026adc7a471edd018a060427e62d06e54be2bc Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 20 Nov 2011 15:50:32 +0100
Subject: [PATCH 18/35] MIPS: ath79: remove ar724x_pci_add_data function
The variables set by this function are not used anymore.
Remove the function and the relevant variables as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
---
arch/mips/ath79/mach-ubnt-xm.c | 7 -------
arch/mips/ath79/pci.c | 8 --------
arch/mips/ath79/pci.h | 6 ------
3 files changed, 0 insertions(+), 21 deletions(-)
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -82,12 +82,6 @@ static struct ath79_spi_platform_data ub
#ifdef CONFIG_PCI
static struct ath9k_platform_data ubnt_xm_eeprom_data;
-static struct ar724x_pci_data ubnt_xm_pci_data[] = {
- {
- .irq = ATH79_PCI_IRQ(0),
- },
-};
-
static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
@@ -104,7 +98,6 @@ static void __init ubnt_xm_pci_init(void
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
- ar724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
ath79_register_pci();
}
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -18,8 +18,6 @@
static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
static unsigned ath79_pci_nr_irqs __initdata;
-static struct ar724x_pci_data *pci_data;
-static int pci_data_size;
static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
{
@@ -45,12 +43,6 @@ static const struct ath79_pci_irq ar724x
}
};
-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size)
-{
- pci_data = data;
- pci_data_size = size;
-}
-
int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
{
int irq = -1;
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -11,18 +11,12 @@
#ifndef _ATH79_PCI_H
#define _ATH79_PCI_H
-struct ar724x_pci_data {
- int irq;
-};
-
struct ath79_pci_irq {
u8 slot;
u8 pin;
int irq;
};
-void ar724x_pci_add_data(struct ar724x_pci_data *data, int size);
-
#ifdef CONFIG_PCI
void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));

33
target/linux/ar71xx/patches-3.2/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch
View File

@ -1,33 +0,0 @@
From 1759a5bc87d0eb8dbb0d8a9794b336813057eb88 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 25 Nov 2010 17:59:28 +0100
Subject: [PATCH 19/35] MIPS: ath79: register PCI controller on the PB44 board
The PB44 reference board has two miniPCI slots. Register
the PCI controller to make those usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
v2: - no changes
---
arch/mips/ath79/mach-pb44.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -19,6 +19,7 @@
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
+#include "pci.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
@@ -114,6 +115,7 @@ static void __init pb44_init(void)
ath79_register_spi(&pb44_spi_data, pb44_spi_info,
ARRAY_SIZE(pb44_spi_info));
ath79_register_usb();
+ ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",

77
target/linux/ar71xx/patches-3.2/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch
View File

@ -1,77 +0,0 @@
From e83c294ff219ff709b8179cbff64f293199a6dad Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 22 Nov 2011 21:13:58 +0100
Subject: [PATCH 20/35] MIPS: ath79: update copyright headers of PCI related files
Add copyright records according to the recent changes in
the PCI code. Also fix up the descriptions.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Just in case if someone is curious about why 2008 and 2009 years are
present in this change:
The recent PCI specific changes were based on an existing
code which can be found in the OpenWrt repository, and we
are working on that since 2008.
v2: - no changes
---
arch/mips/ath79/pci.c | 4 ++++
arch/mips/ath79/pci.h | 4 +++-
arch/mips/include/asm/mach-ath79/pci.h | 4 +++-
arch/mips/pci/pci-ar724x.c | 3 ++-
4 files changed, 12 insertions(+), 3 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -2,6 +2,10 @@
* Atheros AR71XX/AR724X specific PCI setup code
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -1,7 +1,9 @@
/*
- * Atheros 724x PCI support
+ * Atheros AR71XX/AR724X PCI support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -1,7 +1,9 @@
/*
- * Atheros 724x PCI support
+ * Atheros AR71XX/AR724X PCI support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -1,7 +1,8 @@
/*
- * Atheros 724x PCI support
+ * Atheros AR724X PCI host controller driver
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published

52
target/linux/ar71xx/patches-3.2/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch
View File

@ -1,52 +0,0 @@
From f60aed87f838ecfa4033ff1f63f97d05359b3b51 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 11 Dec 2011 17:36:08 +0100
Subject: [PATCH 21/35] MIPS: ath79: add early_printk support for AR934X
The patch allows to see kernel messages on AR934X SoCs in
early boot stage.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/early_printk.c | 3 +++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 6 +++++-
2 files changed, 8 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
case REV_ID_MAJOR_AR7241:
case REV_ID_MAJOR_AR7242:
case REV_ID_MAJOR_AR913X:
+ case REV_ID_MAJOR_AR9341:
+ case REV_ID_MAJOR_AR9342:
+ case REV_ID_MAJOR_AR9344:
_prom_putchar = prom_putchar_ar71xx;
break;
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -1,10 +1,11 @@
/*
* Atheros AR71XX/AR724X/AR913X SoC register definitions
*
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
- * Parts of this file are based on Atheros' 2.6.15 BSP
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -249,6 +250,9 @@
#define REV_ID_MAJOR_AR7242 0x1100
#define REV_ID_MAJOR_AR9330 0x0110
#define REV_ID_MAJOR_AR9331 0x1110
+#define REV_ID_MAJOR_AR9341 0x0120
+#define REV_ID_MAJOR_AR9342 0x1120
+#define REV_ID_MAJOR_AR9344 0x2120
#define AR71XX_REV_ID_MINOR_MASK 0x3
#define AR71XX_REV_ID_MINOR_AR7130 0x0

54
target/linux/ar71xx/patches-3.2/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch
View File

@ -1,54 +0,0 @@
From 655a57ed2df5e34c32645e08c3244facba70ae5f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 14:39:04 +0100
Subject: [PATCH 22/35] MIPS: ath79: sort case statements in ath79_detect_sys_type
Sort the case statements alphabetically in order to improve
readability.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/setup.c | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -116,18 +116,6 @@ static void __init ath79_detect_sys_type
rev = id & AR724X_REV_ID_REVISION_MASK;
break;
- case REV_ID_MAJOR_AR9330:
- ath79_soc = ATH79_SOC_AR9330;
- chip = "9330";
- rev = id & AR933X_REV_ID_REVISION_MASK;
- break;
-
- case REV_ID_MAJOR_AR9331:
- ath79_soc = ATH79_SOC_AR9331;
- chip = "9331";
- rev = id & AR933X_REV_ID_REVISION_MASK;
- break;
-
case REV_ID_MAJOR_AR913X:
minor = id & AR913X_REV_ID_MINOR_MASK;
rev = id >> AR913X_REV_ID_REVISION_SHIFT;
@@ -145,6 +133,18 @@ static void __init ath79_detect_sys_type
}
break;
+ case REV_ID_MAJOR_AR9330:
+ ath79_soc = ATH79_SOC_AR9330;
+ chip = "9330";
+ rev = id & AR933X_REV_ID_REVISION_MASK;
+ break;
+
+ case REV_ID_MAJOR_AR9331:
+ ath79_soc = ATH79_SOC_AR9331;
+ chip = "9331";
+ rev = id & AR933X_REV_ID_REVISION_MASK;
+ break;
+
default:
panic("ath79: unknown SoC, id:0x%08x\n", id);
}

120
target/linux/ar71xx/patches-3.2/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch
View File

@ -1,120 +0,0 @@
From 9c19e86a7eccf8efd159ba213290830164f33a71 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 11 Dec 2011 17:36:42 +0100
Subject: [PATCH 23/35] MIPS: ath79: add SoC detection code for AR934X
Also add 'soc_is_ar934[124x]' helper functions and a Kconfig
symbol for the AR934X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/Kconfig | 4 ++++
arch/mips/ath79/setup.c | 21 ++++++++++++++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
arch/mips/include/asm/mach-ath79/ath79.h | 23 +++++++++++++++++++++++
4 files changed, 49 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -69,6 +69,10 @@ config SOC_AR933X
select USB_ARCH_HAS_EHCI
def_bool n
+config SOC_AR934X
+ select USB_ARCH_HAS_EHCI
+ def_bool n
+
config ATH79_DEV_GPIO_BUTTONS
def_bool n
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -1,10 +1,11 @@
/*
* Atheros AR71XX/AR724X/AR913X specific setup
*
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
- * Parts of this file are based on Atheros' 2.6.15 BSP
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -145,6 +146,24 @@ static void __init ath79_detect_sys_type
rev = id & AR933X_REV_ID_REVISION_MASK;
break;
+ case REV_ID_MAJOR_AR9341:
+ ath79_soc = ATH79_SOC_AR9341;
+ chip = "9341";
+ rev = id & AR934X_REV_ID_REVISION_MASK;
+ break;
+
+ case REV_ID_MAJOR_AR9342:
+ ath79_soc = ATH79_SOC_AR9342;
+ chip = "9342";
+ rev = id & AR934X_REV_ID_REVISION_MASK;
+ break;
+
+ case REV_ID_MAJOR_AR9344:
+ ath79_soc = ATH79_SOC_AR9344;
+ chip = "9344";
+ rev = id & AR934X_REV_ID_REVISION_MASK;
+ break;
+
default:
panic("ath79: unknown SoC, id:0x%08x\n", id);
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -271,6 +271,8 @@
#define AR724X_REV_ID_REVISION_MASK 0x3
+#define AR934X_REV_ID_REVISION_MASK 0xf
+
/*
* SPI block
*/
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -29,6 +29,9 @@ enum ath79_soc_type {
ATH79_SOC_AR9132,
ATH79_SOC_AR9330,
ATH79_SOC_AR9331,
+ ATH79_SOC_AR9341,
+ ATH79_SOC_AR9342,
+ ATH79_SOC_AR9344,
};
extern enum ath79_soc_type ath79_soc;
@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
ath79_soc == ATH79_SOC_AR9331);
}
+static inline int soc_is_ar9341(void)
+{
+ return (ath79_soc == ATH79_SOC_AR9341);
+}
+
+static inline int soc_is_ar9342(void)
+{
+ return (ath79_soc == ATH79_SOC_AR9342);
+}
+
+static inline int soc_is_ar9344(void)
+{
+ return (ath79_soc == ATH79_SOC_AR9344);
+}
+
+static inline int soc_is_ar934x(void)
+{
+ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+}
+
extern void __iomem *ath79_ddr_base;
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;

194
target/linux/ar71xx/patches-3.2/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch
View File

@ -1,194 +0,0 @@
From 783addfa256e79892f889e95ec5cda34f4e91eb7 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 20:36:32 +0100
Subject: [PATCH 24/35] MIPS: ath79: add clock initialization code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/clock.c | 81 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 53 +++++++++++++++
2 files changed, 134 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -1,8 +1,11 @@
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(vo
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
+static void __init ar934x_clocks_init(void)
+{
+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+ u32 cpu_pll, ddr_pll;
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
+ ath79_ref_clk.rate = 40 * 1000 * 1000;
+ else
+ ath79_ref_clk.rate = 25 * 1000 * 1000;
+
+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
+ frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+
+ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
+ cpu_pll /= (1 << out_div);
+
+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
+ frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+
+ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
+ ddr_pll /= (1 << out_div);
+
+ clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
+
+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+ else
+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+ AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
+
+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+ else
+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+ AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
+
+ if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+ else
+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+
+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
+ ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
void __init ath79_clocks_init(void)
{
if (soc_is_ar71xx())
@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
ar913x_clocks_init();
else if (soc_is_ar933x())
ar933x_clocks_init();
+ else if (soc_is_ar934x())
+ ar934x_clocks_init();
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -151,6 +151,41 @@
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
+#define AR934X_PLL_CPU_CONFIG_REG 0x00
+#define AR934X_PLL_DDR_CONFIG_REG 0x04
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
+
+#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
+#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
+#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
+#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
+#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
+#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
+
+#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
+#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
+#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
+#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
+#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
+#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
+#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
+#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
+
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
/*
* USB_CONFIG block
*/
@@ -186,6 +221,8 @@
#define AR933X_RESET_REG_RESET_MODULE 0x1c
#define AR933X_RESET_REG_BOOTSTRAP 0xac
+#define AR934X_RESET_REG_BOOTSTRAP 0xb0
+
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
#define MISC_INT_TIMER3 BIT(9)
@@ -242,6 +279,22 @@
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
+#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
+#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
+#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
+#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
+#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
+#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
+#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
+#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
+#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
+#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
+#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
+#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
+#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+#define AR934X_BOOTSTRAP_DDR1 BIT(0)
+
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0

98
target/linux/ar71xx/patches-3.2/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch
View File

@ -1,98 +0,0 @@
From c01b6005cfa2d762c2de33d5be2e82f91afaa66f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 20:53:47 +0100
Subject: [PATCH 25/35] MIPS: ath79: add GPIO support code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/gpio.c | 47 +++++++++++++++++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 47 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -1,9 +1,12 @@
/*
* Atheros AR71XX/AR724X/AR913X GPIO API support
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(s
return 0;
}
+static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = ath79_gpio_base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ath79_gpio_lock, flags);
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
+ base + AR71XX_GPIO_REG_OE);
+
+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+
+ return 0;
+}
+
+static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ void __iomem *base = ath79_gpio_base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ath79_gpio_lock, flags);
+
+ if (value)
+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
+ else
+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
+ base + AR71XX_GPIO_REG_OE);
+
+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+
+ return 0;
+}
+
static struct gpio_chip ath79_gpio_chip = {
.label = "ath79",
.get = ath79_gpio_get_value,
@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
ath79_gpio_count = AR913X_GPIO_COUNT;
else if (soc_is_ar933x())
ath79_gpio_count = AR933X_GPIO_COUNT;
+ else if (soc_is_ar934x())
+ ath79_gpio_count = AR934X_GPIO_COUNT;
else
BUG();
ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
ath79_gpio_chip.ngpio = ath79_gpio_count;
+ if (soc_is_ar934x()) {
+ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ }
err = gpiochip_add(&ath79_gpio_chip);
if (err)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -367,5 +367,6 @@
#define AR724X_GPIO_COUNT 18
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
+#define AR934X_GPIO_COUNT 23
#endif /* __ASM_MACH_AR71XX_REGS_H */

154
target/linux/ar71xx/patches-3.2/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch
View File

@ -1,154 +0,0 @@
From e69d89040d4884ea4069352338f555694e65fe70 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 21:30:03 +0100
Subject: [PATCH 26/35] MIPS: ath79: rework IP2/IP3 interrupt handling
The current implementation assumes that flushing the
DDR writeback buffer is required for IP2/IP3 interrupts,
however this is not true for all SoCs.
Use SoC specific IP2/IP3 handlers instead of flushing
the buffers in the dispatcher code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/irq.c | 92 ++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 72 insertions(+), 20 deletions(-)
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -1,7 +1,7 @@
/*
* Atheros AR71xx/AR724x/AR913x specific interrupt handling
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
@@ -23,8 +23,8 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
-static unsigned int ath79_ip2_flush_reg;
-static unsigned int ath79_ip3_flush_reg;
+static void (*ath79_ip2_handler)(void);
+static void (*ath79_ip3_handler)(void);
static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
@@ -152,10 +152,8 @@ asmlinkage void plat_irq_dispatch(void)
if (pending & STATUSF_IP7)
do_IRQ(ATH79_CPU_IRQ_TIMER);
- else if (pending & STATUSF_IP2) {
- ath79_ddr_wb_flush(ath79_ip2_flush_reg);
- do_IRQ(ATH79_CPU_IRQ_IP2);
- }
+ else if (pending & STATUSF_IP2)
+ ath79_ip2_handler();
else if (pending & STATUSF_IP4)
do_IRQ(ATH79_CPU_IRQ_GE0);
@@ -163,10 +161,8 @@ asmlinkage void plat_irq_dispatch(void)
else if (pending & STATUSF_IP5)
do_IRQ(ATH79_CPU_IRQ_GE1);
- else if (pending & STATUSF_IP3) {
- ath79_ddr_wb_flush(ath79_ip3_flush_reg);
- do_IRQ(ATH79_CPU_IRQ_USB);
- }
+ else if (pending & STATUSF_IP3)
+ ath79_ip3_handler();
else if (pending & STATUSF_IP6)
do_IRQ(ATH79_CPU_IRQ_MISC);
@@ -175,22 +171,78 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
+/*
+ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
+ * these devices typically allocate coherent DMA memory, however the
+ * DMA controller may still have some unsynchronized data in the FIFO.
+ * Issue a flush in the handlers to ensure that the driver sees
+ * the update.
+ */
+static void ar71xx_ip2_handler(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar724x_ip2_handler(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar913x_ip2_handler(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar933x_ip2_handler(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar71xx_ip3_handler(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar724x_ip3_handler(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar913x_ip3_handler(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar933x_ip3_handler(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
void __init arch_init_irq(void)
{
if (soc_is_ar71xx()) {
- ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
- ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
+ ath79_ip2_handler = ar71xx_ip2_handler;
+ ath79_ip3_handler = ar71xx_ip3_handler;
} else if (soc_is_ar724x()) {
- ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
- ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
+ ath79_ip2_handler = ar724x_ip2_handler;
+ ath79_ip3_handler = ar724x_ip3_handler;
} else if (soc_is_ar913x()) {
- ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
- ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
+ ath79_ip2_handler = ar913x_ip2_handler;
+ ath79_ip3_handler = ar913x_ip3_handler;
} else if (soc_is_ar933x()) {
- ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
- ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
- } else
+ ath79_ip2_handler = ar933x_ip2_handler;
+ ath79_ip3_handler = ar933x_ip3_handler;
+ } else {
BUG();
+ }
cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
mips_cpu_irq_init();

190
target/linux/ar71xx/patches-3.2/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch
View File

@ -1,190 +0,0 @@
From 9db6021011556948d2d28d6957cee451bc2985aa Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 21:59:50 +0100
Subject: [PATCH 27/35] MIPS: ath79: add IRQ handling code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/irq.c | 55 +++++++++++++++++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 25 +++++++++++
arch/mips/include/asm/mach-ath79/irq.h | 6 ++-
3 files changed, 83 insertions(+), 3 deletions(-)
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -1,10 +1,11 @@
/*
* Atheros AR71xx/AR724x/AR913x specific interrupt handling
*
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
- * Parts of this file are based on Atheros' 2.6.15 BSP
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(v
if (soc_is_ar71xx() || soc_is_ar913x())
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
- else if (soc_is_ar724x() || soc_is_ar933x())
+ else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
else
BUG();
@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(v
irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
}
+static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ u32 status;
+
+ disable_irq_nosync(irq);
+
+ status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
+
+ if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
+ generic_handle_irq(ATH79_IP2_IRQ(0));
+ } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
+ generic_handle_irq(ATH79_IP2_IRQ(1));
+ } else {
+ spurious_interrupt();
+ }
+
+ enable_irq(irq);
+}
+
+static void ar934x_ip2_irq_init(void)
+{
+ int i;
+
+ for (i = ATH79_IP2_IRQ_BASE;
+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+ irq_set_chip_and_handler(i, &dummy_irq_chip,
+ handle_level_irq);
+
+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
+}
+
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending;
@@ -202,6 +236,11 @@ static void ar933x_ip2_handler(void)
do_IRQ(ATH79_CPU_IRQ_IP2);
}
+static void ar934x_ip2_handler(void)
+{
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
static void ar71xx_ip3_handler(void)
{
ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
@@ -226,6 +265,12 @@ static void ar933x_ip3_handler(void)
do_IRQ(ATH79_CPU_IRQ_USB);
}
+static void ar934x_ip3_handler(void)
+{
+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
void __init arch_init_irq(void)
{
if (soc_is_ar71xx()) {
@@ -240,6 +285,9 @@ void __init arch_init_irq(void)
} else if (soc_is_ar933x()) {
ath79_ip2_handler = ar933x_ip2_handler;
ath79_ip3_handler = ar933x_ip3_handler;
+ } else if (soc_is_ar934x()) {
+ ath79_ip2_handler = ar934x_ip2_handler;
+ ath79_ip3_handler = ar934x_ip3_handler;
} else {
BUG();
}
@@ -247,4 +295,7 @@ void __init arch_init_irq(void)
cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
mips_cpu_irq_init();
ath79_misc_irq_init();
+
+ if (soc_is_ar934x())
+ ar934x_ip2_irq_init();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -92,6 +92,12 @@
#define AR933X_DDR_REG_FLUSH_USB 0x84
#define AR933X_DDR_REG_FLUSH_WMAC 0x88
+#define AR934X_DDR_REG_FLUSH_GE0 0x9c
+#define AR934X_DDR_REG_FLUSH_GE1 0xa0
+#define AR934X_DDR_REG_FLUSH_USB 0xa4
+#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
+#define AR934X_DDR_REG_FLUSH_WMAC 0xac
+
/*
* PLL block
*/
@@ -222,6 +228,7 @@
#define AR933X_RESET_REG_BOOTSTRAP 0xac
#define AR934X_RESET_REG_BOOTSTRAP 0xb0
+#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
@@ -295,6 +302,24 @@
#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
#define AR934X_BOOTSTRAP_DDR1 BIT(0)
+#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
+#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
+#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
+#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
+#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
+ (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
+ AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
+
+#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
+ (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
+ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
+ AR934X_PCIE_WMAC_INT_PCIE_RC3)
+
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,7 +10,7 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 46
+#define NR_IRQS 48
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
@@ -19,6 +19,10 @@
#define ATH79_PCI_IRQ_COUNT 6
#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
+#define ATH79_IP2_IRQ_BASE (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
+#define ATH79_IP2_IRQ_COUNT 2
+#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
+
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)

56
target/linux/ar71xx/patches-3.2/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch
View File

@ -1,56 +0,0 @@
From da0f20f8a99de9193fc484a25d1f9edc913c98fd Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 10 Dec 2011 20:09:39 +0100
Subject: [PATCH 28/35] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/common.c | 9 ++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 9 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -1,9 +1,12 @@
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar934x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();
@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar934x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -227,6 +227,7 @@
#define AR933X_RESET_REG_RESET_MODULE 0x1c
#define AR933X_RESET_REG_BOOTSTRAP 0xac
+#define AR934X_RESET_REG_RESET_MODULE 0x1c
#define AR934X_RESET_REG_BOOTSTRAP 0xb0
#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac

23
target/linux/ar71xx/patches-3.2/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch
View File

@ -1,23 +0,0 @@
From 6b6803a249a27aa708bc5f24aa15270e30f3de61 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 10 Dec 2011 19:55:05 +0100
Subject: [PATCH 29/35] MIPS: ath79: register UART device for AR934X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/dev-common.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
if (soc_is_ar71xx() ||
soc_is_ar724x() ||
- soc_is_ar913x()) {
+ soc_is_ar913x() ||
+ soc_is_ar934x()) {
ath79_uart_data[0].uartclk = clk_get_rate(clk);
platform_device_register(&ath79_uart_device);
} else if (soc_is_ar933x()) {

112
target/linux/ar71xx/patches-3.2/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch
View File

@ -1,112 +0,0 @@
From 58b69cf52387a7351ec13b52d3d6a495fe611c29 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 22:07:23 +0100
Subject: [PATCH 30/35] MIPS: ath79: add WMAC registration code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/Kconfig | 2 +-
arch/mips/ath79/dev-wmac.c | 30 ++++++++++++++++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
3 files changed, 32 insertions(+), 3 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -86,7 +86,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X)
+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
def_bool n
endif
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -1,9 +1,12 @@
/*
* Atheros AR913X/AR933X SoC built-in WMAC device support
*
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
+ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resour
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
}, {
- .start = ATH79_CPU_IRQ_IP2,
- .end = ATH79_CPU_IRQ_IP2,
+ /* .start and .end fields are filled dynamically */
.flags = IORESOURCE_IRQ,
},
};
@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(voi
ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
}
@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(voi
ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
if (t & AR933X_BOOTSTRAP_REF_CLK_40)
@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(voi
ath79_wmac_data.external_reset = ar933x_wmac_reset;
}
+static void ar934x_wmac_setup(void)
+{
+ u32 t;
+
+ ath79_wmac_device.name = "ar934x_wmac";
+
+ ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
+ ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+
+ t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+ if (t & AR934X_BOOTSTRAP_REF_CLK_40)
+ ath79_wmac_data.is_clk_25mhz = false;
+ else
+ ath79_wmac_data.is_clk_25mhz = true;
+}
+
void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
else if (soc_is_ar933x())
ar933x_wmac_setup();
+ else if (soc_is_ar934x())
+ ar934x_wmac_setup();
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -61,6 +61,9 @@
#define AR933X_EHCI_BASE 0x1b000000
#define AR933X_EHCI_SIZE 0x1000
+#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+#define AR934X_WMAC_SIZE 0x20000
+
/*
* DDR_CTRL block
*/

107
target/linux/ar71xx/patches-3.2/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch
View File

@ -1,107 +0,0 @@
From 2d832612094b5592641364773c5ab2a3658f7120 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 11 Dec 2011 18:34:13 +0100
Subject: [PATCH 31/35] MIPS: ath79: add USB platform setup code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/dev-usb.c | 28 +++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 35 ++++++++++++++++++++++++
2 files changed, 63 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -180,6 +180,32 @@ static void __init ar933x_usb_setup(void
platform_device_register(&ath79_ehci_device);
}
+static void __init ar934x_usb_setup(void)
+{
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+ return;
+
+ ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
+ udelay(1000);
+
+ ath79_device_reset_set(AR934X_RESET_USB_PHY);
+ udelay(1000);
+
+ ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
+ udelay(1000);
+
+ ath79_device_reset_set(AR934X_RESET_USB_HOST);
+ udelay(1000);
+
+ ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
+ ath79_ehci_resources[0].end = AR934X_EHCI_BASE + AR934X_EHCI_SIZE - 1;
+ ath79_ehci_device.name = "ar934x-ehci";
+ platform_device_register(&ath79_ehci_device);
+}
+
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
@@ -192,6 +218,8 @@ void __init ath79_register_usb(void)
ar913x_usb_setup();
else if (soc_is_ar933x())
ar933x_usb_setup();
+ else if (soc_is_ar934x())
+ ar934x_usb_setup();
else
BUG();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -63,6 +63,8 @@
#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR934X_WMAC_SIZE 0x20000
+#define AR934X_EHCI_BASE 0x1b000000
+#define AR934X_EHCI_SIZE 0x1000
/*
* DDR_CTRL block
@@ -288,6 +290,39 @@
#define AR933X_RESET_USB_PHY BIT(4)
#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR934X_RESET_HOST BIT(31)
+#define AR934X_RESET_SLIC BIT(30)
+#define AR934X_RESET_HDMA BIT(29)
+#define AR934X_RESET_EXTERNAL BIT(28)
+#define AR934X_RESET_RTC BIT(27)
+#define AR934X_RESET_PCIE_EP_INT BIT(26)
+#define AR934X_RESET_CHKSUM_ACC BIT(25)
+#define AR934X_RESET_FULL_CHIP BIT(24)
+#define AR934X_RESET_GE1_MDIO BIT(23)
+#define AR934X_RESET_GE0_MDIO BIT(22)
+#define AR934X_RESET_CPU_NMI BIT(21)
+#define AR934X_RESET_CPU_COLD BIT(20)
+#define AR934X_RESET_HOST_RESET_INT BIT(19)
+#define AR934X_RESET_PCIE_EP BIT(18)
+#define AR934X_RESET_UART1 BIT(17)
+#define AR934X_RESET_DDR BIT(16)
+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define AR934X_RESET_NANDF BIT(14)
+#define AR934X_RESET_GE1_MAC BIT(13)
+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
+#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
+#define AR934X_RESET_HOST_DMA_INT BIT(10)
+#define AR934X_RESET_GE0_MAC BIT(9)
+#define AR934X_RESET_ETH_SIWTCH BIT(8)
+#define AR934X_RESET_PCIE_PHY BIT(7)
+#define AR934X_RESET_PCIE BIT(6)
+#define AR934X_RESET_USB_HOST BIT(5)
+#define AR934X_RESET_USB_PHY BIT(4)
+#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR934X_RESET_LUT BIT(2)
+#define AR934X_RESET_MBOX BIT(1)
+#define AR934X_RESET_I2S BIT(0)
+
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)

62
target/linux/ar71xx/patches-3.2/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch
View File

@ -1,62 +0,0 @@
From f299f36542f81f05cff7cdebb50abde202faf6df Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 17 Dec 2011 10:04:18 +0100
Subject: [PATCH 32/35] MIPS: ath79: add PCI_AR724X Kconfig symbol
The AR724X specific PCI code can be used for the
AR934X SoCs, however it can be selected only if
SOC_AR724X is set.
Introduce a new Kconfig symbol in order to be able
to use the code for AR934X as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/Kconfig | 4 ++++
arch/mips/include/asm/mach-ath79/pci.h | 2 +-
arch/mips/pci/Makefile | 2 +-
3 files changed, 6 insertions(+), 2 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -59,6 +59,7 @@ config SOC_AR724X
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select HW_HAS_PCI
+ select PCI_AR724X if PCI
def_bool n
config SOC_AR913X
@@ -73,6 +74,9 @@ config SOC_AR934X
select USB_ARCH_HAS_EHCI
def_bool n
+config PCI_AR724X
+ def_bool n
+
config ATH79_DEV_GPIO_BUTTONS
def_bool n
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void);
static inline int ar71xx_pcibios_init(void) { return 0 };
#endif
-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X)
+#if defined(CONFIG_PCI_AR724X)
int ar724x_pcibios_init(int irq);
#else
static inline int ar724x_pcibios_init(int irq) { return 0 };
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
-obj-$(CONFIG_SOC_AR724X) += pci-ar724x.o
+obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
#
# These are still pretty much in the old state, watch, go blind.

58
target/linux/ar71xx/patches-3.2/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch
View File

@ -1,58 +0,0 @@
From e30d942814a606c5258c7adafc6bbb49836573e9 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 17 Dec 2011 10:13:08 +0100
Subject: [PATCH 33/35] MIPS: ath79: add PCI registration code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/Kconfig | 2 ++
arch/mips/ath79/pci.c | 13 ++++++++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -72,6 +72,8 @@ config SOC_AR933X
config SOC_AR934X
select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
+ select PCI_AR724X if PCI
def_bool n
config PCI_AR724X
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/pci.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/pci.h>
@@ -57,7 +58,9 @@ int __init pcibios_map_irq(const struct
if (soc_is_ar71xx()) {
ath79_pci_irq_map = ar71xx_pci_irq_map;
ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
- } else if (soc_is_ar724x()) {
+ } else if (soc_is_ar724x() ||
+ soc_is_ar9342() ||
+ soc_is_ar9344()) {
ath79_pci_irq_map = ar724x_pci_irq_map;
ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
} else {
@@ -115,5 +118,13 @@ int __init ath79_register_pci(void)
if (soc_is_ar724x())
return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+ if (soc_is_ar9342() || soc_is_ar9344()) {
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
+ return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
+ }
+
return -ENODEV;
}

213
target/linux/ar71xx/patches-3.2/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch
View File

@ -1,213 +0,0 @@
From a01e8727327cf0fb6382ca8700a3a3f73d93202a Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Dec 2011 22:23:02 +0100
Subject: [PATCH 34/35] MIPS: ath79: add initial support for the Atheros DB120 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
---
arch/mips/ath79/Kconfig | 12 +++
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/mach-db120.c | 155 ++++++++++++++++++++++++++++++++++++++++++
arch/mips/ath79/machtypes.h | 1 +
4 files changed, 169 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/ath79/mach-db120.c
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
+config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros DB120 reference board.
+
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
#
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
--- /dev/null
+++ b/arch/mips/ath79/mach-db120.c
@@ -0,0 +1,155 @@
+/*
+ * Atheros DB120 reference board support
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted (subject to the limitations in the
+ * disclaimer below) provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * * Neither the name of Qualcomm Atheros nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
+ * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define DB120_GPIO_LED_WLAN_5G 12
+#define DB120_GPIO_LED_WLAN_2G 13
+#define DB120_GPIO_LED_STATUS 14
+#define DB120_GPIO_LED_WPS 15
+
+#define DB120_GPIO_BTN_WPS 16
+
+#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
+
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led db120_leds_gpio[] __initdata = {
+ {
+ .name = "db120:green:status",
+ .gpio = DB120_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "db120:green:wps",
+ .gpio = DB120_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "db120:green:wlan-5g",
+ .gpio = DB120_GPIO_LED_WLAN_5G,
+ .active_low = 1,
+ },
+ {
+ .name = "db120:green:wlan-2g",
+ .gpio = DB120_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DB120_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct spi_board_info db120_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "s25sl064a",
+ }
+};
+
+static struct ath79_spi_platform_data db120_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data db120_ath9k_data;
+
+static int db120_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ dev->dev.platform_data = &db120_ath9k_data;
+ break;
+ }
+
+ return 0;
+}
+
+static void __init db120_pci_init(u8 *eeprom)
+{
+ memcpy(db120_ath9k_data.eeprom_data, eeprom,
+ sizeof(db120_ath9k_data.eeprom_data));
+
+ ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void db120_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init db120_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+ db120_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(db120_gpio_keys),
+ db120_gpio_keys);
+ ath79_register_spi(&db120_spi_data, db120_spi_info,
+ ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+ db120_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -18,6 +18,7 @@ enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
};

41
target/linux/ar71xx/patches-3.2/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch
View File

@ -1,41 +0,0 @@
From cbf8930fe259777fb746f0387bf821729061c122 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 11 Dec 2011 22:09:20 +0100
Subject: [PATCH 35/35] USB: ehci-ath79: add device_id entry for the AR934X SoCs
Also make the USB_EHCI_ATH79 selectable for the AR934X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-usb@vger.kernel.org
---
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-ath79.c | 4 ++++
2 files changed, 5 insertions(+), 1 deletions(-)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -210,7 +210,7 @@ config USB_CNS3XXX_EHCI
config USB_EHCI_ATH79
bool "EHCI support for AR7XXX/AR9XXX SoCs"
- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
+ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X || SOC_AR934X)
select USB_EHCI_ROOT_HUB_TT
default y
---help---
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -37,6 +37,10 @@ static const struct platform_device_id e
.driver_data = EHCI_ATH79_IP_V2,
},
{
+ .name = "ar934x-ehci",
+ .driver_data = EHCI_ATH79_IP_V2,
+ },
+ {
/* terminating entry */
},
};

122
target/linux/ar71xx/patches-3.2/201-spi-ath79-add-delay-between-SCK-changes.patch
View File

@ -1,122 +0,0 @@
From 8e948c035dd7983eccc3a889f2497e64044f3a31 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 20:06:35 +0100
Subject: [PATCH 1/7] spi/ath79: add delay between SCK changes
The driver uses the "as fast as it can" approach
to drive the SCK signal. However this does not
work with certain low speed SPI chips (e.g. the
PCF2123 RTC chip). Add per-bit slowdowns in order
to be able to use the driver with such chips as
well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 43 insertions(+), 1 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -24,17 +24,24 @@
#include <linux/spi/spi_bitbang.h>
#include <linux/bitops.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79_spi_platform.h>
#define DRV_NAME "ath79-spi"
+#define ATH79_SPI_RRW_DELAY_FACTOR 12000
+#define MHZ (1000 * 1000)
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
u32 reg_ctrl;
void __iomem *base;
+ struct clk *clk;
+ unsigned rrw_delay;
};
static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
return spi_master_get_devdata(spi->master);
}
+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
+{
+ if (nsecs > sp->rrw_delay)
+ ndelay(nsecs - sp->rrw_delay);
+}
+
static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
/* setup MSB (to slave) on trailing edge */
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+ ath79_spi_delay(sp, nsecs);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(sp, nsecs);
word <<= 1;
}
@@ -198,6 +213,7 @@ static __devinit int ath79_spi_probe(str
struct ath79_spi *sp;
struct ath79_spi_platform_data *pdata;
struct resource *r;
+ unsigned long rate;
int ret;
master = spi_alloc_master(&pdev->dev, sizeof(*sp));
@@ -239,12 +255,36 @@ static __devinit int ath79_spi_probe(str
goto err_put_master;
}
+ sp->clk = clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sp->clk)) {
+ ret = PTR_ERR(sp->clk);
+ goto err_unmap;
+ }
+
+ ret = clk_enable(sp->clk);
+ if (ret)
+ goto err_clk_put;
+
+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+ sp->rrw_delay);
+
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
- goto err_unmap;
+ goto err_clk_disable;
return 0;
+err_clk_disable:
+ clk_disable(sp->clk);
+err_clk_put:
+ clk_put(sp->clk);
err_unmap:
iounmap(sp->base);
err_put_master:
@@ -259,6 +299,8 @@ static __devexit int ath79_spi_remove(st
struct ath79_spi *sp = platform_get_drvdata(pdev);
spi_bitbang_stop(&sp->bitbang);
+ clk_disable(sp->clk);
+ clk_put(sp->clk);
iounmap(sp->base);
platform_set_drvdata(pdev, NULL);
spi_master_put(sp->bitbang.master);

21
target/linux/ar71xx/patches-3.2/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch
View File

@ -1,21 +0,0 @@
From ea7e40aedae58b7a0f0ccd8658063de499734874 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 20:33:41 +0100
Subject: [PATCH 2/7] spi/ath79: add missing HIGH->LOW SCK transition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
ath79_spi_delay(sp, nsecs);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
ath79_spi_delay(sp, nsecs);
+ if (bits == 1)
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
word <<= 1;
}

30
target/linux/ar71xx/patches-3.2/203-spi-ath79-remove-superfluous-chip-select-code.patch
View File

@ -1,30 +0,0 @@
From ecf57a64feb737dec1da72aab21dccd30a88ba19 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:03:28 +0100
Subject: [PATCH 3/7] spi/ath79: remove superfluous chip select code
The spi_bitbang driver calls the chipselect function
of the driver from spi_bitbang_setup in order to
deselect the given SPI chip, so we don't have to
initialize the CS line here.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
gpio_free(cdata->gpio);
return status;
}
- } else {
- if (spi->mode & SPI_CS_HIGH)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
- else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
return 0;

56
target/linux/ar71xx/patches-3.2/204-spi-ath79-use-gpio_request_one.patch
View File

@ -1,56 +0,0 @@
From dd5b424b0b3f0370f9b63594ad53c16989b6ad78 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:04:21 +0100
Subject: [PATCH 4/7] spi/ath79: use gpio_request_one
Use gpio_request_one() instead of multiple gpiolib calls.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
1 files changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
struct ath79_spi_controller_data *cdata;
+ int status;
cdata = spi->controller_data;
if (spi->chip_select && !cdata)
@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
/* TODO: setup speed? */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ status = 0;
if (spi->chip_select) {
- int status = 0;
+ unsigned long flags;
- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
- if (status)
- return status;
-
- status = gpio_direction_output(cdata->gpio,
- spi->mode & SPI_CS_HIGH);
- if (status) {
- gpio_free(cdata->gpio);
- return status;
- }
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+ flags |= GPIOF_INIT_HIGH;
+ else
+ flags |= GPIOF_INIT_LOW;
+
+ status = gpio_request_one(cdata->gpio, flags,
+ dev_name(&spi->dev));
}
- return 0;
+ return status;
}
static void ath79_spi_cleanup_cs(struct spi_device *spi)

108
target/linux/ar71xx/patches-3.2/205-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch
View File

@ -1,108 +0,0 @@
From 25e681989198e94656eab9df22b8b761abd2ae26 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:00:46 +0100
Subject: [PATCH 5/7] spi/ath79: avoid multiple initialization of the SPI controller
Currently we are initializing the SPI controller in
the chip select line function, and that function is
called once for each SPI device on the bus. If a
board has multiple SPI devices, the controller will
be initialized multiple times.
Introduce ath79_spi_{en,dis}able helper functions,
and call those from probe/response in order to avoid
the mutliple initialization of the controller.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
1 files changed, 24 insertions(+), 17 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
}
-static int ath79_spi_setup_cs(struct spi_device *spi)
+static void ath79_spi_enable(struct ath79_spi *sp)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- struct ath79_spi_controller_data *cdata;
- int status;
-
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
- return -EINVAL;
-
/* enable GPIO mode */
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
/* TODO: setup speed? */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+}
+
+static void ath79_spi_disable(struct ath79_spi *sp)
+{
+ /* restore CTRL register */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+ /* disable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+}
+
+static int ath79_spi_setup_cs(struct spi_device *spi)
+{
+ struct ath79_spi_controller_data *cdata;
+ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+ return -EINVAL;
status = 0;
if (spi->chip_select) {
@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-
if (spi->chip_select) {
struct ath79_spi_controller_data *cdata = spi->controller_data;
gpio_free(cdata->gpio);
}
-
- /* restore CTRL register */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
- /* disable GPIO mode */
- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
}
static int ath79_spi_setup(struct spi_device *spi)
@@ -271,12 +274,15 @@ static __devinit int ath79_spi_probe(str
dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
sp->rrw_delay);
+ ath79_spi_enable(sp);
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
- goto err_clk_disable;
+ goto err_disable;
return 0;
+err_disable:
+ ath79_spi_disable(sp);
err_clk_disable:
clk_disable(sp->clk);
err_clk_put:
@@ -295,6 +301,7 @@ static __devexit int ath79_spi_remove(st
struct ath79_spi *sp = platform_get_drvdata(pdev);
spi_bitbang_stop(&sp->bitbang);
+ ath79_spi_disable(sp);
clk_disable(sp->clk);
clk_put(sp->clk);
iounmap(sp->base);

45
target/linux/ar71xx/patches-3.2/206-spi-ath79-add-shutdown-handler.patch
View File

@ -1,45 +0,0 @@
From e01dcc2835017b55e936bd150ddab29bfcf2c63c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 22:19:32 +0100
Subject: [PATCH 6/7] spi/ath79: add shutdown handler
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -296,7 +296,7 @@ err_put_master:
return ret;
}
-static __devexit int ath79_spi_remove(struct platform_device *pdev)
+static void __ath79_spi_remove(struct platform_device *pdev)
{
struct ath79_spi *sp = platform_get_drvdata(pdev);
@@ -307,13 +307,23 @@ static __devexit int ath79_spi_remove(st
iounmap(sp->base);
platform_set_drvdata(pdev, NULL);
spi_master_put(sp->bitbang.master);
+}
+static __devexit int ath79_spi_remove(struct platform_device *pdev)
+{
+ __ath79_spi_remove(pdev);
return 0;
}
+static void ath79_spi_shutdown(struct platform_device *pdev)
+{
+ __ath79_spi_remove(pdev);
+}
+
static struct platform_driver ath79_spi_driver = {
.probe = ath79_spi_probe,
.remove = __devexit_p(ath79_spi_remove),
+ .shutdown = ath79_spi_shutdown,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,

252
target/linux/ar71xx/patches-3.2/207-spi-ath79-make-chipselect-logic-more-flexible.patch
View File

@ -1,252 +0,0 @@
From bdbd9b2861ba73557795915598bb276a8568d130 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 22:25:11 +0100
Subject: [PATCH 7/7] spi/ath79: make chipselect logic more flexible
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/mach-ap121.c | 6 ++
arch/mips/ath79/mach-ap81.c | 6 ++
arch/mips/ath79/mach-pb44.c | 6 ++
arch/mips/ath79/mach-ubnt-xm.c | 6 ++
.../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
drivers/spi/spi-ath79.c | 63 ++++++++++++--------
6 files changed, 69 insertions(+), 26 deletions(-)
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
}
};
+static struct ath79_spi_controller_data ap121_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ap121_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l1606e",
+ .controller_data = &ap121_spi0_data,
}
};
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
}
};
+static struct ath79_spi_controller_data ap81_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ap81_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
+ .controller_data = &ap81_spi0_data,
}
};
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
}
};
+static struct ath79_spi_controller_data pb44_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info pb44_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
+ .controller_data = &pb44_spi0_data,
},
};
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
}
};
+static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ubnt_xm_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
+ .controller_data = &ubnt_xm_spi0_data,
}
};
--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
unsigned num_chipselect;
};
+enum ath79_spi_cs_type {
+ ATH79_SPI_CS_TYPE_INTERNAL,
+ ATH79_SPI_CS_TYPE_GPIO,
+};
+
struct ath79_spi_controller_data {
- unsigned gpio;
+ enum ath79_spi_cs_type cs_type;
+ unsigned cs_line;
};
#endif /* _ATH79_SPI_PLATFORM_H */
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -35,6 +35,8 @@
#define ATH79_SPI_RRW_DELAY_FACTOR 12000
#define MHZ (1000 * 1000)
+#define ATH79_SPI_CS_LINE_MAX 2
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
if (is_active) {
/* set initial clock polarity */
@@ -80,20 +83,21 @@ static void ath79_spi_chipselect(struct
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
-
- /* SPI is normally active-low */
- gpio_set_value(cdata->gpio, cs_high);
- } else {
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
if (cs_high)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
+ /* SPI is normally active-low */
+ gpio_set_value(cdata->cs_line, cs_high);
+ break;
+ }
}
static void ath79_spi_enable(struct ath79_spi *sp)
@@ -120,24 +124,30 @@ static void ath79_spi_disable(struct ath
static int ath79_spi_setup_cs(struct spi_device *spi)
{
struct ath79_spi_controller_data *cdata;
+ unsigned long flags;
int status;
cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
+ if (!cdata)
return -EINVAL;
status = 0;
- if (spi->chip_select) {
- unsigned long flags;
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
+ status = -EINVAL;
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
flags = GPIOF_DIR_OUT;
if (spi->mode & SPI_CS_HIGH)
flags |= GPIOF_INIT_HIGH;
else
flags |= GPIOF_INIT_LOW;
- status = gpio_request_one(cdata->gpio, flags,
+ status = gpio_request_one(cdata->cs_line, flags,
dev_name(&spi->dev));
+ break;
}
return status;
@@ -145,9 +155,15 @@ static int ath79_spi_setup_cs(struct spi
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
+
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
+ /* nothing to do */
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
+ gpio_free(cdata->cs_line);
+ break;
}
}
@@ -215,6 +231,10 @@ static __devinit int ath79_spi_probe(str
unsigned long rate;
int ret;
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
master = spi_alloc_master(&pdev->dev, sizeof(*sp));
if (master == NULL) {
dev_err(&pdev->dev, "failed to allocate spi master\n");
@@ -224,17 +244,10 @@ static __devinit int ath79_spi_probe(str
sp = spi_master_get_devdata(master);
platform_set_drvdata(pdev, sp);
- pdata = pdev->dev.platform_data;
-
master->setup = ath79_spi_setup;
master->cleanup = ath79_spi_cleanup;
- if (pdata) {
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
- } else {
- master->bus_num = -1;
- master->num_chipselect = 1;
- }
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->num_chipselect;
sp->bitbang.master = spi_master_get(master);
sp->bitbang.chipselect = ath79_spi_chipselect;

21
target/linux/ar71xx/patches-3.2/208-MIPS-ath79-db120-spi-chipselect-fix.patch
View File

@ -1,21 +0,0 @@
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -95,12 +95,18 @@ static struct gpio_keys_button db120_gpi
},
};
+static struct ath79_spi_controller_data db120_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info db120_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "s25sl064a",
+ .controller_data = &db120_spi0_data,
}
};

27
target/linux/ar71xx/patches-3.2/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch
View File

@ -1,27 +0,0 @@
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void)
if (soc_is_ar71xx())
ath79_gpio_count = AR71XX_GPIO_COUNT;
- else if (soc_is_ar724x())
- ath79_gpio_count = AR724X_GPIO_COUNT;
+ else if (soc_is_ar7240())
+ ath79_gpio_count = AR7240_GPIO_COUNT;
+ else if (soc_is_ar7241() || soc_is_ar7242())
+ ath79_gpio_count = AR7241_GPIO_COUNT;
else if (soc_is_ar913x())
ath79_gpio_count = AR913X_GPIO_COUNT;
else if (soc_is_ar933x())
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -428,7 +428,8 @@
#define AR71XX_GPIO_REG_FUNC 0x28
#define AR71XX_GPIO_COUNT 16
-#define AR724X_GPIO_COUNT 18
+#define AR7240_GPIO_COUNT 18
+#define AR7241_GPIO_COUNT 20
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23

12
target/linux/ar71xx/patches-3.2/211-MIPS-ath79-fix-ar933x_wmac_reset.patch
View File

@ -1,12 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -62,8 +62,8 @@ static void __init ar913x_wmac_setup(voi
static int ar933x_wmac_reset(void)
{
- ath79_device_reset_clear(AR933X_RESET_WMAC);
ath79_device_reset_set(AR933X_RESET_WMAC);
+ ath79_device_reset_clear(AR933X_RESET_WMAC);
return 0;
}

18
target/linux/ar71xx/patches-3.2/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch
View File

@ -1,18 +0,0 @@
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ b/arch/mips/include/asm/mach-ath79/pci.h
@@ -16,13 +16,13 @@
#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
int ar71xx_pcibios_init(void);
#else
-static inline int ar71xx_pcibios_init(void) { return 0 };
+static inline int ar71xx_pcibios_init(void) { return 0; }
#endif
#if defined(CONFIG_PCI_AR724X)
int ar724x_pcibios_init(int irq);
#else
-static inline int ar724x_pcibios_init(int irq) { return 0 };
+static inline int ar724x_pcibios_init(int irq) { return 0; }
#endif
#endif /* __ASM_MACH_ATH79_PCI_H */

11
target/linux/ar71xx/patches-3.2/213-MIPS-ath79-fix-a-typo-in-ar71xx_regs.h
View File

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -313,7 +313,7 @@
#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
#define AR934X_RESET_HOST_DMA_INT BIT(10)
#define AR934X_RESET_GE0_MAC BIT(9)
-#define AR934X_RESET_ETH_SIWTCH BIT(8)
+#define AR934X_RESET_ETH_SWITCH BIT(8)
#define AR934X_RESET_PCIE_PHY BIT(7)
#define AR934X_RESET_PCIE BIT(6)
#define AR934X_RESET_USB_HOST BIT(5)

11
target/linux/ar71xx/patches-3.2/214-MIPS-ath79-fix-IRQ-number-for-AR7240-OHCI.patch
View File

@ -1,11 +0,0 @@
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -126,6 +126,8 @@ static void __init ar7240_usb_setup(void
ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+ ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+ ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
platform_device_register(&ath79_ohci_device);
}

94
target/linux/ar71xx/patches-3.2/401-mtd-physmap-add-lock-unlock.patch
View File

@ -1,94 +0,0 @@
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -29,6 +29,66 @@ struct physmap_flash_info {
struct map_info map[MAX_RESOURCES];
};
+static struct platform_device *physmap_map2pdev(struct map_info *map)
+{
+ return (struct platform_device *) map->map_priv_1;
+}
+
+static void physmap_lock(struct map_info *map)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = physmap_map2pdev(map);
+ physmap_data = pdev->dev.platform_data;
+ physmap_data->lock(pdev);
+}
+
+static void physmap_unlock(struct map_info *map)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = physmap_map2pdev(map);
+ physmap_data = pdev->dev.platform_data;
+ physmap_data->unlock(pdev);
+}
+
+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
+{
+ map_word ret;
+
+ physmap_lock(map);
+ ret = inline_map_read(map, ofs);
+ physmap_unlock(map);
+
+ return ret;
+}
+
+static void physmap_flash_write_lock(struct map_info *map, map_word d,
+ unsigned long ofs)
+{
+ physmap_lock(map);
+ inline_map_write(map, d, ofs);
+ physmap_unlock(map);
+}
+
+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ physmap_lock(map);
+ inline_map_copy_from(map, to, from, len);
+ physmap_unlock(map);
+}
+
+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
+ const void *from, ssize_t len)
+{
+ physmap_lock(map);
+ inline_map_copy_to(map, to, from, len);
+ physmap_unlock(map);
+}
+
static int physmap_flash_remove(struct platform_device *dev)
{
struct physmap_flash_info *info;
@@ -140,6 +200,13 @@ static int physmap_flash_probe(struct pl
simple_map_init(&info->map[i]);
+ if (physmap_data->lock && physmap_data->unlock) {
+ info->map[i].read = physmap_flash_read_lock;
+ info->map[i].write = physmap_flash_write_lock;
+ info->map[i].copy_from = physmap_flash_copy_from_lock;
+ info->map[i].copy_to = physmap_flash_copy_to_lock;
+ }
+
probe_type = rom_probe_types;
if (physmap_data->probe_type == NULL) {
for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -26,6 +26,8 @@ struct physmap_flash_data {
unsigned int width;
int (*init)(struct platform_device *);
void (*exit)(struct platform_device *);
+ void (*lock)(struct platform_device *);
+ void (*unlock)(struct platform_device *);
void (*set_vpp)(struct platform_device *, int);
unsigned int nr_parts;
unsigned int pfow_base;

29
target/linux/ar71xx/patches-3.2/402-mtd-SST39VF6401B-support.patch
View File

@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -148,6 +148,7 @@
#define SST39LF160 0x2782
#define SST39VF1601 0x234b
#define SST39VF3201 0x235b
+#define SST39VF6401B 0x236d
#define SST39WF1601 0x274b
#define SST39WF1602 0x274a
#define SST39LF512 0x00D4
@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
ERASEINFO(0x10000,64),
}
}, {
+ .mfr_id = CFI_MFR_SST,
+ .dev_id = SST39VF6401B,
+ .name = "SST 39VF6401B",
+ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
+ .dev_size = SIZE_8MiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x10000,128)
+ }
+ }, {
.mfr_id = CFI_MFR_ST,
.dev_id = M29F800AB,
.name = "ST M29F800AB",

69
target/linux/ar71xx/patches-3.2/403-mtd_fix_cfi_cmdset_0002_status_check.patch
View File

@ -1,69 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1214,8 +1214,8 @@ static int __xipram do_write_oneword(str
break;
}
- if (chip_ready(map, adr))
- break;
+ if (chip_good(map, adr, datum))
+ goto enable_xip;
/* Latency issues. Drop the lock, wait a while and retry */
UDELAY(map, chip, adr, 1);
@@ -1231,6 +1231,8 @@ static int __xipram do_write_oneword(str
ret = -EIO;
}
+
+ enable_xip:
xip_enable(map, chip, adr);
op_done:
chip->state = FL_READY;
@@ -1563,7 +1565,6 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
-
/*
* Handle devices with one erase region, that only implement
* the chip erase command.
@@ -1627,8 +1628,8 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
- break;
+ if (chip_good(map, adr, map_word_ff(map)))
+ goto op_done;
if (time_after(jiffies, timeo)) {
printk(KERN_WARNING "MTD %s(): software timeout\n",
@@ -1648,6 +1649,7 @@ static int __xipram do_erase_chip(struct
ret = -EIO;
}
+ op_done:
chip->state = FL_READY;
xip_enable(map, chip, adr);
put_chip(map, chip, adr);
@@ -1715,9 +1717,9 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, map_word_ff(map))) {
xip_enable(map, chip, adr);
- break;
+ goto op_done;
}
if (time_after(jiffies, timeo)) {
@@ -1739,6 +1741,7 @@ static int __xipram do_erase_oneblock(st
ret = -EIO;
}
+ op_done:
chip->state = FL_READY;
put_chip(map, chip, adr);
mutex_unlock(&chip->mutex);

25
target/linux/ar71xx/patches-3.2/404-mtd-wrt160nl-trx-parser.patch
View File

@ -1,25 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -148,6 +148,12 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
+config MTD_WRT160NL_PARTS
+ tristate "Linksys WRT160NL partitioning support"
+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
+ ---help---
+ Linksys WRT160NL partitioning support
+
config MTD_MYLOADER_PARTS
tristate "MyLoader partition parsing"
depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.

34
target/linux/ar71xx/patches-3.2/405-mtd-tp-link-partition-parser.patch
View File

@ -1,34 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -150,7 +150,7 @@ config MTD_AR7_PARTS
config MTD_WRT160NL_PARTS
tristate "Linksys WRT160NL partitioning support"
- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
+ depends on ATH79_MACH_WRT160NL
---help---
Linksys WRT160NL partitioning support
@@ -170,6 +170,12 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_TPLINK_PARTS
+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
+ depends on ATH79
+ ---help---
+ TBD.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

112
target/linux/ar71xx/patches-3.2/406-mtd-m25p80-allow-to-specify-max-read-size.patch
View File

@ -1,112 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -100,6 +100,7 @@ struct m25p {
u16 addr_width;
u8 erase_opcode;
u8 *command;
+ size_t max_read_len;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -352,6 +353,7 @@ static int m25p80_read(struct mtd_info *
struct m25p *flash = mtd_to_m25p(mtd);
struct spi_transfer t[2];
struct spi_message m;
+ loff_t ofs;
pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
__func__, (u32)from, len);
@@ -374,8 +376,6 @@ static int m25p80_read(struct mtd_info *
t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
spi_message_add_tail(&t[0], &m);
- t[1].rx_buf = buf;
- t[1].len = len;
spi_message_add_tail(&t[1], &m);
/* Byte count starts at zero. */
@@ -383,13 +383,6 @@ static int m25p80_read(struct mtd_info *
mutex_lock(&flash->lock);
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
- mutex_unlock(&flash->lock);
- return 1;
- }
-
/* FIXME switch to OPCODE_FAST_READ. It's required for higher
* clocks; and at this writing, every chip this driver handles
* supports that opcode.
@@ -397,11 +390,44 @@ static int m25p80_read(struct mtd_info *
/* Set up the write data buffer. */
flash->command[0] = OPCODE_READ;
- m25p_addr2cmd(flash, from, flash->command);
- spi_sync(flash->spi, &m);
+ ofs = 0;
+ while (len) {
+ size_t readlen;
+ size_t done;
+ int ret;
+
+ ret = wait_till_ready(flash);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ if (flash->max_read_len > 0 &&
+ flash->max_read_len < len)
+ readlen = flash->max_read_len;
+ else
+ readlen = len;
+
+ t[1].rx_buf = buf + ofs;
+ t[1].len = readlen;
+
+ m25p_addr2cmd(flash, from + ofs, flash->command);
+
+ spi_sync(flash->spi, &m);
- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
+ done = m.actual_length - m25p_cmdsz(flash) -
+ FAST_READ_DUMMY_BYTE;
+ if (done != readlen) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ ofs += done;
+ len -= done;
+ }
+
+ *retlen = ofs;
mutex_unlock(&flash->lock);
@@ -924,6 +950,12 @@ static int __devinit m25p_probe(struct s
flash->mtd.erase = m25p80_erase;
flash->mtd.read = m25p80_read;
+ if (data && data->max_read_len) {
+ flash->max_read_len = data->max_read_len;
+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
+ flash->max_read_len);
+ }
+
/* sst flash chips use AAI word program */
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
flash->mtd.write = sst_write;
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -25,6 +25,7 @@ struct flash_platform_data {
char *type;
+ size_t max_read_len;
/* we'll likely add more ... use JEDEC IDs, etc */
};

23
target/linux/ar71xx/patches-3.2/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
View File

@ -1,23 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -1016,7 +1016,9 @@ static int __devinit m25p_probe(struct s
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ return mtd_device_parse_register(&flash->mtd,
+ data ? data->part_probes : NULL,
+ &ppdata,
data ? data->parts : NULL,
data ? data->nr_parts : 0);
}
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -24,6 +24,7 @@ struct flash_platform_data {
unsigned int nr_parts;
char *type;
+ const char **part_probes;
size_t max_read_len;
/* we'll likely add more ... use JEDEC IDs, etc */

54
target/linux/ar71xx/patches-3.2/408-mtd-redboot_partition_scan.patch
View File

@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -79,31 +79,32 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
+ buf = vmalloc(master->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ restart:
if ( directory < 0 ) {
offset = master->size + directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
if (!offset) {
nogood:
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+ vfree(buf);
return -EIO;
}
offset -= master->erasesize;
}
} else {
offset = directory * master->erasesize;
- while (master->block_isbad &&
+ while (master->block_isbad &&
master->block_isbad(master, offset)) {
offset += master->erasesize;
if (offset == master->size)
goto nogood;
}
}
- buf = vmalloc(master->erasesize);
-
- if (!buf)
- return -ENOMEM;
-
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -175,6 +176,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */
+ if (offset + master->erasesize < master->size) {
+ /* not at the end of the flash yet, maybe next block :) */
+ directory++;
+ goto restart;
+ }
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
master->name);
ret = 0;

21
target/linux/ar71xx/patches-3.2/409-mtd-rb4xx_nand_driver.patch
View File

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -537,4 +537,8 @@ config MTD_NAND_FSMC
Enables support for NAND Flash chips on the ST Microelectronics
Flexible Static Memory Controller (FSMC)
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATH79_MACH_RB4XX
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

21
target/linux/ar71xx/patches-3.2/410-mtd-rb750-nand-driver.patch
View File

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -541,4 +541,8 @@ config MTD_NAND_RB4XX
tristate "NAND flash driver for RouterBoard 4xx series"
depends on MTD_NAND && ATH79_MACH_RB4XX
+config MTD_NAND_RB750
+ tristate "NAND flash driver for the RouterBoard 750"
+ depends on MTD_NAND && ATH79_MACH_RB750
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

61
target/linux/ar71xx/patches-3.2/411-mtd-cfi_cmdset_0002-force-word-write.patch
View File

@ -1,61 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -39,7 +39,7 @@
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
#define MAX_WORD_RETRIES 3
@@ -50,7 +50,9 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#if !FORCE_WORD_WRITE
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#endif
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
@@ -183,6 +185,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
+#if !FORCE_WORD_WRITE
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -192,6 +195,7 @@ static void fixup_use_write_buffers(stru
mtd->write = cfi_amdstd_write_buffers;
}
}
+#endif /* !FORCE_WORD_WRITE */
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
@@ -1374,6 +1378,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
+#if !FORCE_WORD_WRITE
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
@@ -1485,7 +1490,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
-
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -1564,6 +1568,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
+#endif /* !FORCE_WORD_WRITE */
/*
* Handle devices with one erase region, that only implement

10
target/linux/ar71xx/patches-3.2/412-mtd-m25p80-zero-partition-parser-data.patch
View File

@ -1,10 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -977,6 +977,7 @@ static int __devinit m25p_probe(struct s
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
+ memset(&ppdata, '\0', sizeof(ppdata));
ppdata.of_node = spi->dev.of_node;
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;

28
target/linux/ar71xx/patches-3.2/420-net-ar71xx_mac_driver.patch
View File

@ -1,28 +0,0 @@
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_ATHEROS
bool "Atheros devices"
default y
- depends on PCI
+ depends on (PCI || ATH79)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -67,4 +67,6 @@ config ATL1C
To compile this driver as a module, choose M here. The module
will be called atl1c.
+source drivers/net/ethernet/atheros/ag71xx/Kconfig
+
endif # NET_VENDOR_ATHEROS
--- a/drivers/net/ethernet/atheros/Makefile
+++ b/drivers/net/ethernet/atheros/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Atheros network device drivers.
#
+obj-$(CONFIG_AG71XX) += ag71xx/
obj-$(CONFIG_ATL1) += atlx/
obj-$(CONFIG_ATL2) += atlx/
obj-$(CONFIG_ATL1E) += atl1e/

11
target/linux/ar71xx/patches-3.2/422-dsa-trailer-tag-validation-fix.patch
View File

@ -1,11 +0,0 @@
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
trailer = skb_tail_pointer(skb) - 4;
if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
goto out_drop;
source_port = trailer[1] & 7;

26
target/linux/ar71xx/patches-3.2/423-dsa-add-88e6063-driver.patch
View File

@ -1,26 +0,0 @@
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
This enables support for the Marvell 88E6060 ethernet switch
chip.
+config NET_DSA_MV88E6063
+ bool "Marvell 88E6063 ethernet switch chip support"
+ select NET_DSA_TAG_TRAILER
+ ---help---
+ This enables support for the Marvell 88E6063 ethernet switch
+ chip
+
config NET_DSA_MV88E6XXX_NEED_PPU
bool
default n
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
# switch drivers
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o

12
target/linux/ar71xx/patches-3.2/430-drivers-link-spi-before-mtd.patch
View File

@ -1,12 +0,0 @@
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -51,8 +51,8 @@ obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
-obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_MTD) += mtd/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/

19
target/linux/ar71xx/patches-3.2/431-spi-add-various-flags.patch
View File

@ -1,19 +0,0 @@
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -441,6 +441,8 @@ struct spi_transfer {
dma_addr_t rx_dma;
unsigned cs_change:1;
+ unsigned verify:1;
+ unsigned fast_write:1;
u8 bits_per_word;
u16 delay_usecs;
u32 speed_hz;
@@ -482,6 +484,7 @@ struct spi_message {
struct spi_device *spi;
unsigned is_dma_mapped:1;
+ unsigned fast_read:1;
/* REVISIT: we might want a flag affecting the behavior of the
* last transfer ... allowing things like "read 16 bit length L"

25
target/linux/ar71xx/patches-3.2/432-spi-rb4xx-spi-driver.patch
View File

@ -1,25 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -289,6 +289,12 @@ config SPI_PXA2XX
config SPI_PXA2XX_PCI
def_bool SPI_PXA2XX && X86_32 && PCI
+config SPI_RB4XX
+ tristate "Mikrotik RB4XX SPI master"
+ depends on SPI_MASTER && ATH79_MACH_RB4XX
+ help
+ SPI controller driver for the Mikrotik RB4xx series boards.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C2410 && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o

26
target/linux/ar71xx/patches-3.2/433-spi-rb4xx-cpld-driver.patch
View File

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -441,6 +441,13 @@ config SPI_TLE62X0
sysfs interface, with each line presented as a kind of GPIO
exposing both switch control and diagnostic feedback.
+config SPI_RB4XX_CPLD
+ tristate "MikroTik RB4XX CPLD driver"
+ depends on ATH79_MACH_RB4XX
+ help
+ SPI driver for the Xilinx CPLD chip present on the
+ MikroTik RB4xx boards.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o

27
target/linux/ar71xx/patches-3.2/434-spi-ap83_spi_controller.patch
View File

@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
+obj-$(CONFIG_SPI_AP83) += spi-ap83.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -59,6 +59,14 @@ config SPI_ALTERA
help
This is the driver for the Altera SPI Controller.
+config SPI_AP83
+ tristate "Atheros AP83 specific SPI Controller"
+ depends on SPI_MASTER && ATH79_MACH_AP83
+ select SPI_BITBANG
+ help
+ This is a specific SPI controller driver for the Atheros AP83
+ reference board.
+
config SPI_ATH79
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
depends on ATH79 && GENERIC_GPIO

23
target/linux/ar71xx/patches-3.2/435-spi-vsc7385_driver.patch
View File

@ -1,23 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -456,6 +456,11 @@ config SPI_RB4XX_CPLD
SPI driver for the Xilinx CPLD chip present on the
MikroTik RB4xx boards.
+config SPI_VSC7385
+ tristate "Vitesse VSC7385 ethernet switch driver"
+ help
+ SPI driver for the Vitesse VSC7385 ethernet switch.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -61,5 +61,5 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
-

26
target/linux/ar71xx/patches-3.2/440-leds-wndr3700-usb-led-driver.patch
View File

@ -1,26 +0,0 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -395,6 +395,13 @@ config LEDS_TRIGGERS
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
+config LEDS_WNDR3700_USB
+ tristate "NETGEAR WNDR3700 USB LED driver"
+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
+ help
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o

23
target/linux/ar71xx/patches-3.2/441-leds-rb750-led-driver.patch
View File

@ -1,23 +0,0 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -402,6 +402,10 @@ config LEDS_WNDR3700_USB
This option enables support for the USB LED found on the
NETGEAR WNDR3700 board.
+config LEDS_RB750
+ tristate "LED driver for the Mikrotik RouterBOARD 750"
+ depends on LEDS_CLASS && ATH79_MACH_RB750
+
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o

26
target/linux/ar71xx/patches-3.2/450-gpio-nxp-74hc153-gpio-chip-driver.patch
View File

@ -1,26 +0,0 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -489,4 +489,13 @@ config GPIO_TPS65910
help
Select this option to enable GPIO driver for the TPS65910
chip family.
+
+comment "Other GPIO expanders"
+
+config GPIO_NXP_74HC153
+ tristate "NXP 74HC153 Dual 4-input multiplexer"
+ help
+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+ provides a GPIO interface supporting input mode only.
+
endif
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o
+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o

Some files were not shown because too many files have changed in this diff Show More