diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 39450a5af7..8e98f5bc25 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -29,6 +29,7 @@ ipq40xx_setup_interfaces() engenius,eap1300|\ engenius,emd1|\ meraki,mr33|\ + meraki,mr74|\ mikrotik,lhgg-60ad|\ mikrotik,sxtsq-5-ac|\ netgear,ex6100v2|\ diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e0b4eed6f2..19ce3faf78 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -9,7 +9,8 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in - meraki,mr33) + meraki,mr33 |\ + meraki,mr74) caldata_extract_ubi "ART" 0x9000 0x844 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1) @@ -108,7 +109,8 @@ case "$FIRMWARE" in caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; - meraki,mr33) + meraki,mr33 |\ + meraki,mr74) caldata_extract_ubi "ART" 0x1000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2) @@ -188,7 +190,8 @@ case "$FIRMWARE" in caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3) ;; - meraki,mr33) + meraki,mr33 |\ + meraki,mr74) caldata_extract_ubi "ART" 0x5000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3) diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh index 2609a55d27..cf89624ea3 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh @@ -21,7 +21,8 @@ preinit_set_mac_address() { ip link set dev eth0 address "$base_mac" ip link set dev eth1 address $(macaddr_add "$base_mac" 1) ;; - meraki,mr33) + meraki,mr33|\ + meraki,mr74) mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) [ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan" ;; diff --git a/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh index 18c13c602c..a8a4469e6c 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh @@ -11,6 +11,7 @@ set_preinit_iface() { linksys,ea8300| \ linksys,mr8300| \ meraki,mr33| \ + meraki,mr74| \ zyxel,nbg6617) ifname=eth0 ;; diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 8a6702df4e..4b320209a3 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -165,7 +165,8 @@ platform_do_upgrade() { linksys,whw01-v1) platform_do_upgrade_linksys "$1" ;; - meraki,mr33) + meraki,mr33 |\ + meraki,mr74) CI_KERNPART="part.safe" nand_do_upgrade "$1" ;; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi new file mode 100644 index 0000000000..47646e4b3c --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for Meraki "Insect" series + * + * Copyright (C) 2017 Chris Blake + * Copyright (C) 2017 Christian Lamparter + * + * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include +#include + +/ { + aliases { + led-boot = &status_green; + led-failsafe = &status_red; + led-running = &status_green; + led-upgrade = &power_orange; + }; + + /* Do we really need this defined? */ + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + /* It is a 56-bit counter that supplies the count to the ARM arch + timers and without upstream driver */ + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "ti,cc2650"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ + switch_lan_bmp = <0x0>; /* lan port bitmap */ + switch_wan_bmp = <0x10>; /* wan port bitmap */ + }; + + edma@c080000 { + qcom,single-phy; + qcom,num_gmac = <1>; + phy-mode = "rgmii-rxid"; + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_orange: power { + label = "orange:power"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <1>; + qcom,poll_required = <1>; + vlan_tag = <0 0x20>; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + at24@50 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x50>; + read-only; /* This holds our MAC & Meraki board-data */ + }; +}; + +&blsp1_i2c4 { + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + tricolor: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/8 <2>; + #address-cells = <1>; + #size-cells = <0>; + + /* RGB led */ + status_red: chan@0 { + chan-name = "red:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = ; + }; + + status_green: chan@1 { + chan-name = "green:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = ; + }; + + chan@2 { + chan-name = "blue:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = ; + }; + + chan@3 { + chan-name = "white:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <3>; + color = ; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "sbl1"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "mibib"; + reg = <0x00100000 0x00100000>; + read-only; + }; + partition@200000 { + label = "bootconfig"; + reg = <0x00200000 0x00100000>; + read-only; + }; + partition@300000 { + label = "qsee"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "qsee_alt"; + reg = <0x00400000 0x00100000>; + read-only; + }; + partition@500000 { + label = "cdt"; + reg = <0x00500000 0x00080000>; + read-only; + }; + partition@580000 { + label = "cdt_alt"; + reg = <0x00580000 0x00080000>; + read-only; + }; + partition@600000 { + label = "ddrparams"; + reg = <0x00600000 0x00080000>; + read-only; + }; + partition@700000 { + label = "u-boot"; + reg = <0x00700000 0x00200000>; + read-only; + }; + partition@900000 { + label = "u-boot-backup"; + reg = <0x00900000 0x00200000>; + read-only; + }; + partition@b00000 { + label = "ART"; + reg = <0x00b00000 0x00080000>; + read-only; + }; + partition@c00000 { + label = "ubi"; + reg = <0x00c00000 0x07000000>; + /* + * Do not try to allocate the remaining + * 4 MiB to this ubi partition. It will + * confuse the u-boot and it might not + * find the kernel partition anymore. + */ + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + /* + * GPIO43 should be 0/1 whenever the unit is + * powered through PoE or AC-Adapter. + * That said, playing with this seems to + * reset the AP. + */ + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + /* We use the i2c-0 pins for serial_1 */ + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio20", "gpio21"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c_1_pins: i2c_1_pinmux { + pinmux { + function = "blsp_i2c1"; + pins = "gpio34", "gpio35"; + }; + pinconf { + pins = "gpio34", "gpio35"; + drive-strength = <16>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + /* + * There are 18 pins. 15 pins are common between LCD and NAND. + * The QPIC controller arbitrates between LCD and NAND. Of the + * remaining 4, 2 are for NAND and 2 are for LCD exclusively. + * + * The meraki source hints that the bluetooth module claims + * pin 52 as well. But sadly, there's no data whenever this + * is a NAND or LCD exclusive pin or not. + */ + + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index 9f311b1973..8c8b1b3150 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -1,411 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for Meraki MR33 (Stinkbug) - * - * Copyright (C) 2017 Chris Blake - * Copyright (C) 2017 Christian Lamparter - * - * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ +// Device Tree Source for Meraki MR33 (Stinkbug) -#include "qcom-ipq4019.dtsi" -#include -#include -#include -#include +#include "qcom-ipq4029-insect-common.dtsi" / { model = "Meraki MR33 Access Point"; compatible = "meraki,mr33"; - - aliases { - led-boot = &status_green; - led-failsafe = &status_red; - led-running = &status_green; - led-upgrade = &power_orange; - }; - - /* Do we really need this defined? */ - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - /* It is a 56-bit counter that supplies the count to the ARM arch - timers and without upstream driver */ - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth { - compatible = "ti,cc2650"; - enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-rxid"; - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_orange: power { - label = "orange:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - }; }; -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <1>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - at24@50 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x50>; - read-only; /* This holds our MAC & Meraki board-data */ - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - /* RGB led */ - status_red: chan@0 { - chan-name = "red:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <0>; - color = ; - }; - - status_green: chan@1 { - chan-name = "green:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <1>; - color = ; - }; - - chan@2 { - chan-name = "blue:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <2>; - color = ; - }; - - chan@3 { - chan-name = "white:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <3>; - color = ; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "mibib"; - reg = <0x00100000 0x00100000>; - read-only; - }; - partition@200000 { - label = "bootconfig"; - reg = <0x00200000 0x00100000>; - read-only; - }; - partition@300000 { - label = "qsee"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "qsee_alt"; - reg = <0x00400000 0x00100000>; - read-only; - }; - partition@500000 { - label = "cdt"; - reg = <0x00500000 0x00080000>; - read-only; - }; - partition@580000 { - label = "cdt_alt"; - reg = <0x00580000 0x00080000>; - read-only; - }; - partition@600000 { - label = "ddrparams"; - reg = <0x00600000 0x00080000>; - read-only; - }; - partition@700000 { - label = "u-boot"; - reg = <0x00700000 0x00200000>; - read-only; - }; - partition@900000 { - label = "u-boot-backup"; - reg = <0x00900000 0x00200000>; - read-only; - }; - partition@b00000 { - label = "ART"; - reg = <0x00b00000 0x00080000>; - read-only; - }; - partition@c00000 { - label = "ubi"; - reg = <0x00c00000 0x07000000>; - /* - * Do not try to allocate the remaining - * 4 MiB to this ubi partition. It will - * confuse the u-boot and it might not - * find the kernel partition anymore. - */ - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * GPIO43 should be 0/1 whenever the unit is - * powered through PoE or AC-Adapter. - * That said, playing with this seems to - * reset the AP. - */ - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - /* We use the i2c-0 pins for serial_1 */ - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - pinmux { - function = "blsp_i2c1"; - pins = "gpio34", "gpio35"; - }; - pinconf { - pins = "gpio34", "gpio35"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - /* - * There are 18 pins. 15 pins are common between LCD and NAND. - * The QPIC controller arbitrates between LCD and NAND. Of the - * remaining 4, 2 are for NAND and 2 are for LCD exclusively. - * - * The meraki source hints that the bluetooth module claims - * pin 52 as well. But sadly, there's no data whenever this - * is a NAND or LCD exclusive pin or not. - */ - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; +&tricolor { + enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr74.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr74.dts new file mode 100644 index 0000000000..904f724652 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr74.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Device Tree Source for Meraki MR74 (Ladybug) + +#include "qcom-ipq4029-insect-common.dtsi" + +/ { + model = "Meraki MR74 Access Point"; + compatible = "meraki,mr74"; +}; + +&tricolor { + enable-gpio = <&tlmm 14 GPIO_ACTIVE_LOW>; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 0ddff52ef8..26d9082638 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -704,6 +704,18 @@ define Device/meraki_mr33 endef TARGET_DEVICES += meraki_mr33 +define Device/meraki_mr74 + $(call Device/FitImage) + DEVICE_VENDOR := Cisco Meraki + DEVICE_MODEL := MR74 + SOC := qcom-ipq4029 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct + DEVICE_DTS_CONFIG := config@3 +endef +TARGET_DEVICES += meraki_mr74 + define Device/mobipromo_cm520-79f $(call Device/FitzImage) $(call Device/UbiFit) diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch index 99ea2e423e..70e8c9d27f 100644 --- a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -903,11 +903,77 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -903,11 +903,78 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -85,6 +85,7 @@ Signed-off-by: John Crispin + qcom-ipq4019-gl-b2200.dtb \ + qcom-ipq4029-gl-s1300.dtb \ + qcom-ipq4029-mr33.dtb \ ++ qcom-ipq4029-mr74.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ qcom-msm8660-surf.dtb \ diff --git a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch index f9b3c513bb..19d6b4bb34 100644 --- a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -951,11 +951,76 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -951,11 +951,77 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4018-ap120c-ac.dtb \ qcom-ipq4018-ap120c-ac-bit.dtb \ qcom-ipq4018-jalapeno.dtb \ @@ -84,6 +84,7 @@ Signed-off-by: John Crispin + qcom-ipq4019-gl-b2200.dtb \ + qcom-ipq4029-gl-s1300.dtb \ + qcom-ipq4029-mr33.dtb \ ++ qcom-ipq4029-mr74.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \