mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-04 07:16:03 +08:00
ramips: add support for D-Link DIR-867/DIR-882 A1
This patch adds support for D-Link DIR-867 A1 and D-Link DIR-882 A1. Given
the similarity of these devices, this patch also introduces a common DTS
shared between DIR-867 A1, DIR-878 A1 and DIR-882 A1.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 128 MB (DDR3)
* Flash: 16 MB (SPI NOR)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 2.0, 1 USB 3.0
* Buttons: Reset, WiFi Toggle, WPS
* LEDs: Power (green/orange), Internet (green/orange), WiFi 2.4G (green),
WiFi 5G (green), USB 2.0 (green), USB 3.0 (green)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
* DIR-867 wireless chips are limited to 3x3 streams at hardware level
* USB ports and related LEDs available only on DIR-882
Serial port:
* Parameters: 57600, 8N1
* Location: J1 header (close to the Reset, WiFi and WPS buttons)
* Pinout: 1 - VCC
2 - RXD
3 - TXD
4 - GND
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
Signed-off-by: Mateus B. Cassiano <mbc07@live.com>
[move DEVICE_VARIANT to individual definitions]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Mateus B. Cassiano
Adrian Schmutzler
parent
ed087cba8a
commit
73e8f23579
40
target/linux/ramips/dts/mt7621_dlink_dir-867-a1.dts
Normal file
40
target/linux/ramips/dts/mt7621_dlink_dir-867-a1.dts
Normal file
@ -0,0 +1,40 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621_dlink_dir-8xx-a1.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-867-a1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DIR-867 A1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_net_orange;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "dir-867-a1:orange:power";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "dir-867-a1:green:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_net_orange: net_orange {
|
||||
label = "dir-867-a1:orange:net";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
net_green {
|
||||
label = "dir-867-a1:green:net";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1,10 +1,7 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "mt7621_dlink_dir-8xx-a1.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-878-a1", "mediatek,mt7621-soc";
|
||||
@ -15,11 +12,6 @@
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_net_orange;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
leds {
|
||||
@ -45,137 +37,4 @@
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
compatible = "sge,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x60000 0xfa0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
mtd-mac-address = <&factory 0xe006>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
54
target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts
Normal file
54
target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts
Normal file
@ -0,0 +1,54 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621_dlink_dir-8xx-a1.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-882-a1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DIR-882 A1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_green;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_net_orange;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "dir-882-a1:orange:power";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "dir-882-a1:green:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_net_orange: net_orange {
|
||||
label = "dir-882-a1:orange:net";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
net_green {
|
||||
label = "dir-882-a1:green:net";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "dir-882-a1:green:usb2";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&ehci_port2>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "dir-882-a1:green:usb3";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&xhci_ehci_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
};
|
||||
149
target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi
Normal file
149
target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi
Normal file
@ -0,0 +1,149 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
compatible = "sge,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x60000 0xfa0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
mtd-mac-address = <&factory 0xe006>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -220,6 +220,18 @@ define Device/buffalo_wsr-600dhp
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wsr-600dhp
|
||||
|
||||
define Device/dlink_dir-8xx-a1
|
||||
IMAGE_SIZE := 16000k
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic
|
||||
KERNEL_INITRAMFS := $$(KERNEL) | uimage-padhdr 96
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
||||
pad-rootfs | append-metadata | check-size
|
||||
IMAGE/factory.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
||||
check-size
|
||||
endef
|
||||
|
||||
define Device/dlink_dir-860l-b1
|
||||
$(Device/seama)
|
||||
BLOCKSIZE := 64k
|
||||
@ -236,21 +248,28 @@ define Device/dlink_dir-860l-b1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-860l-b1
|
||||
|
||||
define Device/dlink_dir-867-a1
|
||||
$(Device/dlink_dir-8xx-a1)
|
||||
DEVICE_MODEL := DIR-867
|
||||
DEVICE_VARIANT := A1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-867-a1
|
||||
|
||||
define Device/dlink_dir-878-a1
|
||||
IMAGE_SIZE := 16000k
|
||||
DEVICE_VENDOR := D-Link
|
||||
$(Device/dlink_dir-8xx-a1)
|
||||
DEVICE_MODEL := DIR-878
|
||||
DEVICE_VARIANT := A1
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic
|
||||
KERNEL_INITRAMFS := $$(KERNEL) | uimage-padhdr 96
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
||||
pad-rootfs | append-metadata | check-size
|
||||
IMAGE/factory.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
||||
check-size
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-878-a1
|
||||
|
||||
define Device/dlink_dir-882-a1
|
||||
$(Device/dlink_dir-8xx-a1)
|
||||
DEVICE_MODEL := DIR-882
|
||||
DEVICE_VARIANT := A1
|
||||
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-882-a1
|
||||
|
||||
define Device/d-team_newifi-d2
|
||||
$(Device/uimage-lzma-loader)
|
||||
IMAGE_SIZE := 32448k
|
||||
|
||||
@ -27,7 +27,9 @@ gehua,ghl-r-001)
|
||||
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
||||
;;
|
||||
dlink,dir-860l-b1|\
|
||||
dlink,dir-878-a1)
|
||||
dlink,dir-867-a1|\
|
||||
dlink,dir-878-a1|\
|
||||
dlink,dir-882-a1)
|
||||
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "wan"
|
||||
;;
|
||||
gnubee,gb-pc1|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user